Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, December 9 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Precision Calibration and Functional Testing Services

Open

Federal

Response Deadline11/18/2026, 01:00:00 PM EST

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Precision Calibration and Functional Testing Services subcontract involves performing final functional testing and calibration of repaired Servovalve Assemblies for prime contractors supporting NAVSUP Weapon Systems Support projects. The scope of work requires testing valve response and flow characteristics against specific technical orders utilizing hydraulic test benches and measurement equipment. To qualify, the provider must hold ISO 10012 or NCSL Z540.3 certification, as all equipment used must be calibrated to these standards. The successful contractor is responsible for delivering certified test results and detailed calibration reports. This opportunity is categorized under NAICS code 541380 and is associated with the Department of Defense, with a response deadline of November 18, 2026.

General Info

Subcontract for Servovalve calibration and testing for NAVSUP, requiring ISO 10012 certification.

Agency

Department Of Defense → Navsup Weapon Systems Support Mech

NAICS

541380 - Testing Laboratories and Services

Place of Performance

PA

Set-Aside

NONE

Documents

This scope was carved out of N0010426RYAG8.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

48--SERVOVALVE ASSY, IN REPAIR/MODIFICATION OF

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedSep 21

subcontract

Response DeadlineNov 18

Submission deadline

Response Deadline

11/18/2026, 01:00:00 PM ESTin 6 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Navsup Weapon Systems Support Mech

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Navsup Weapon Systems Support Mech

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs final functional testing and calibration of repaired Servovalve Assemblies for prime contractors on NAVSUP Weapon Systems Support projects. Tests valve response and flow characteristics against technical orders using hydraulic test benches and measurement equipment calibrated to ISO 10012 or NCSL Z540.3. Requires ISO 10012 or NCSL Z540.3 certification. Delivers calibration reports and certified test results.

Similar Contracts

Same NAICS industry code

First Article Test (FAT) ServicesThis subcontract for First Article Test (FAT) Services supports the DLA Weapons Support Land Supply Chain within the Department of Defense. The selected provider will perform critical validation testing on initial production units for prime contractors, ensuring that dimensions, material properties, and performance metrics meet strict specifications. This work involves the use of specialized metrology and inspection equipment, including CMM and hardness testers, and requires strict adherence to ITAR and EAR compliance for the handling of sensitive technical data. The primary deliverables for this engagement are a validated first-article unit and a comprehensive FAT report. Performance will take place at Hill AFB, and the opportunity is categorized under NAICS code 541380. Interested parties must submit their responses by November 23, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 7 hours ago

DEADLINE

Critical Application Testing and CertificationThe Critical Application Testing and Certification subcontract involves providing specialized testing and validation services for prime contractors supporting the DLA Weapons Support ASC. The selected provider will execute tests according to drawing or standard 81996 TEST-STD-1 to validate critical application requirements, utilizing specific measurement equipment and testing rigs. The primary deliverables for this engagement include validated components and certified test reports. To be eligible, contractors must maintain ISO 9001:2015, SAE AS9003, and CMMC Level 2 certifications. The work is performed in Corpus Christi, Texas, under NAICS code 541380. Interested parties must respond by November 20, 2026, for this Department of Defense requirement managed by the DLA Weapons Support ASC Supplier Oper AE and AF Div.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 7 hours ago

DEADLINE

Third-Party Quality Assurance and Zero-Based Sampling InspectionThis subcontract involves providing third-party quality assurance and zero-based sampling inspections for prime contractors supporting DLA Weapons Support ASC projects. The selected provider will be responsible for executing sampling plans in accordance with MIL-STD-1916 or ASQ H1331 and utilizing high-precision metrology equipment to verify dimensional tolerances for matched ring sets. Key deliverables include the submission of detailed inspection reports and certifications. To qualify, contractors must hold AS9100 or ISO 9001 certification and possess specific experience with Air Force Critical Safety Item standards. This opportunity is managed by the Department of Defense under NAICS code 541380, with a response deadline set for December 14, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 7 hours ago

DEADLINE

in about 1 month

Third-Party Quality Assurance and Inspection for Critical FastenersThis subcontract involves providing third-party quality assurance and independent inspection and acceptance testing for critical fasteners on DLA Weapons Support ASC projects. The selected contractor will be responsible for executing zero-based sampling plans to verify dimensions and tolerances in accordance with NASM standards and TDP Rev B Gen 2, following MIL-STD-1916 or ASQ H1331 guidelines. All work must be performed using NIST-calibrated equipment, including optical comparators, micrometers, and CMMs, and the contractor must deliver detailed inspection reports and certifications of conformance. The project is managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, with performance located in New Cumberland. Qualified candidates must hold ASQ H1331 or MIL-STD-1916 certification. The opportunity is categorized under NAICS code 541380, with a response deadline set for November 20, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 7 hours ago

DEADLINE

Third-Party Quality Assurance and CertificationThis subcontract for Third-Party Quality Assurance and Certification supports the Department of Defense, specifically the DLA Weapons Support Land Supplier Operations Vehicle Support. The selected provider will perform independent inspection and verification of pistons for prime contractors, ensuring that critical, major, and minor attributes are validated. All work must adhere to Reference QAP 19207 12344830 using MIL-STD-1916 or MIL-STD-105/ASQ Z1.4 sampling plans, with precision measurement tools calibrated to national standards. Deliverables include detailed inspection reports and signed Certificates of Conformance. The opportunity is designated as a Women-Owned Small Business set-aside under NAICS code 541380. Performance will take place in Anniston, Alabama. Interested parties must respond by November 23, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 7 hours ago

DEADLINE

First Article Test (FAT) Coordination and ValidationThis subcontract, titled First Article Test (FAT) Coordination and Validation, is a total small business set-aside issued by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div. The project is centered on providing quality assurance, measurement, and validation testing for prime contractors. The primary objective is the preparation and delivery of two units for government First Article Approval, ensuring all part dimensions and tolerances strictly adhere to technical drawings. To achieve this, the contractor will utilize specialized metrology equipment and coordinate measuring machines (CMM) to validate the units. The final deliverables include the approved First Article units and the corresponding validated test results. Performance for this contract is located at Hill AFB, and it falls under NAICS code 541380.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 7 hours ago

DEADLINE

First Article Testing (FAT) ServicesThis subcontract for First Article Testing (FAT) Services involves performing and documenting critical validation for Department of Defense aircraft component projects. The selected provider will conduct testing on the first produced unit using aerospace measurement equipment to ensure all technical specifications and performance requirements are met, thereby validating manufacturing processes and product quality. The primary deliverables for this engagement include a comprehensive First Article Test report and certified test results. The project is managed by the DLA Weapons Support ASC Supplier Oper AE and AF Div under the Department of Defense, with the place of performance located at Robins Air Force Base. This opportunity falls under NAICS code 541380 and was posted on November 12, 2026, with a response deadline of November 20, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 7 hours ago

DEADLINE

First Article Testing and Validation ServicesThis subcontract for First Article Testing and Validation Services supports the DLA Weapons Support Land Supply Chain within the Department of Defense. The selected provider will perform critical validation for prime contractors by producing two initial units to ensure manufacturing processes align with technical drawings. Key responsibilities include coordinating Government First Article Test protocols and delivering the two tested units along with a comprehensive validation report. Performance will take place at Robins AFB under NAICS code 541380. Due to the nature of the defense work, the contractor must maintain ITAR authorization and CMMC Level 2 compliance. The solicitation was posted on November 12, 2026, with a response deadline of November 23, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 7 hours ago

DEADLINE

Production Lot Testing (PLT) ServicesThis subcontract opportunity is for Production Lot Testing services supporting the Department of Defense DLA Weapons Support LSO Combat Vehicles and Armament. The selected contractor will perform quality validation for prime contractors by testing two units using gear testing rigs and metallurgical analysis equipment to ensure strict compliance with technical specifications. Key deliverables include a comprehensive production lot testing report and certified test results, with a requirement for the provider to maintain ISO 9001:2015 certification and coordinate closely with Government Source Inspection. The project is designated as a Service-Disabled Veteran-Owned Small Business set-aside under NAICS code 541380. Performance will take place in New Cumberland, Pennsylvania. Interested parties must submit their responses by November 23, 2026.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 7 hours ago

DEADLINE

Liquid Penetrant Inspection ServicesThis subcontract for Liquid Penetrant Inspection Services supports the DLA Weapons Support Nuclear Reactor Program. The selected provider will perform 100 percent penetrant inspection for prime contractors, utilizing fluorescent penetrant inspection equipment to conduct Type 1, Method A, Sensitivity Level 2 inspections in accordance with ASTM E1417. The primary objective is to ensure that no indications exceed 0.062 inch, with the final deliverables consisting of detailed inspection reports and certifications. The project is a total small business set-aside under NAICS code 541380 and will be performed in San Diego, California. Personnel assigned to this contract must hold NDT Level II or III certification per NAS 410. Interested parties must respond by November 23, 2026.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 7 hours ago

DEADLINE

NDT and Quality Certification - Engine MountsThis subcontract for the Department of Defense, specifically the DLA Weapons Support ASC Supplier Oper AE and AF Div, involves providing non-destructive testing and final quality validation for engine mounts. The selected contractor will be responsible for performing magnetic particle, ultrasonic, or X-ray testing in accordance with RQ040, as well as conducting dimensional inspections using CMM. Key deliverables include the preparation of First Article Test reports and the issuance of Certificates of Quality Compliance. To be eligible, contractors must hold NADCAP NDT accreditation and maintain CMMC Level 2 certification. The project falls under NAICS code 541380. Interested parties must submit their responses by the deadline of December 14, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 7 hours ago

DEADLINE

in about 1 month

Critical Application Sampling and Inspection ServicesThe Critical Application Sampling and Inspection Services subcontract involves providing independent quality assurance sampling and inspection for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The selected provider will be responsible for conducting sample lot inspections and verifying close-tolerance dimensions utilizing specialized equipment such as CMM, optical comparators, and micrometers. To ensure zero non-conformance, the contractor must apply sampling plans in accordance with MIL-STD-1916 or ASQ H1331 and deliver comprehensive inspection reports and certifications of conformance. Performance of these services will take place in New Cumberland, Pennsylvania. Eligible contractors must hold AS9100 or ISO 9001 certification to qualify for the project. This opportunity falls under NAICS code 541380, with a response deadline set for November 20, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 7 hours ago

DEADLINE

More opportunities from Department Of Defense → Navsup Weapon Systems Support Mech

Same awarding agency

Repair and Modification of Electric Overload Relays (NSN 5945-01-677-4445)This subcontract involves the repair and modification of Electric Overload Relays (NSN 5945-01-677-4445) for the Department of Defense, specifically supporting NAVSUP Weapon Systems Support projects. The scope of work includes the teardown, evaluation, and disassembly of relays to identify faults, followed by repairs executed according to approved standards and technical orders. The final deliverable consists of three fully repaired and marked relays, with marking performed in accordance with MIL-STD-130, REV N. The project falls under NAICS code 334290 and requires strict adherence to security protocols. Specifically, systems used for processing Federal Contract Information or Controlled Unclassified Information must utilize CMMC unique identifiers. Interested parties should note the response deadline of December 11, 2026.

Other Communications Equipment Manufacturing

POSTED

about 12 hours ago

DEADLINE

Electronic Component Supply (Sub-assemblies)This subcontract for Electronic Component Supply involves providing raw materials and embedded sub-assemblies to prime contractors supporting NAVSUP Weapon Systems Support projects. The selected provider is responsible for delivering component parts or sub-assemblies directly to the prime manufacturer while ensuring all deliverables strictly adhere to Trade Agreements Act compliance and Buy American or Qualifying Country requirements. A critical technical requirement of the contract is the performance of IUID reporting for all embedded sub-assemblies to facilitate the Material Inspection and Receiving Report. This Department of Defense effort falls under NAICS code 334413, with a response deadline set for December 11, 2026.

Semiconductor and Related Device Manufacturing

POSTED

about 12 hours ago

DEADLINE

Printed Circuit Board (PCB) Fabrication and SupplyThis subcontract involves the fabrication and supply of three printed circuit boards for prime contractors supporting NAVSUP Weapon Systems Support projects. The manufacturer is required to produce the boards according to TDP Version 005 and must implement a government-approved inspection system while maintaining detailed work records. Compliance with FAR 52.246-11 is mandatory, and the final deliverables must include both the hardware and the associated quality inspection records. Technical requirements include the application of Item Unique Identification markings in accordance with MIL-STD-130, as well as Depot Level Repairable labels following MIL-STD-129 and MIL-PRF-61002 standards. This Department of Defense effort falls under NAICS code 334412, with a response deadline set for December 11, 2026.

Bare Printed Circuit Board Manufacturing

POSTED

about 12 hours ago

DEADLINE

Repair and Overhaul of Automatic DA ServersThis subcontract involves the repair and overhaul of five Automatic DA Servers (NIIN: 016796894) to support prime contractors on projects for the Department of Defense agency Navsup Weapon Systems Support Mech. The selected provider must execute all repair work in accordance with technical orders, drawings, and contractor standard practices to ensure the units are fully repaired and certified. Key technical requirements include strict adherence to MIL-STD-130, REV N for physical identification and marking, as well as the implementation of Department of Defense item unique identification for all embedded subassemblies. The project falls under NAICS code 811198, with a response deadline set for December 11, 2026.

All Other Automotive Repair and Maintenance

POSTED

about 12 hours ago

DEADLINE

Pressure Regulating Valve (NSN 4820-01-628-7604) SupplierThis subcontract involves the supply of pressure regulating valves for prime contractors supporting Department of the Navy supply contracts. The selected supplier is responsible for manufacturing or sourcing six units of the specific valve identified as NSN 4820-01-628-7604, ensuring all items strictly adhere to government technical specifications and are delivered to the designated government destination. Managed by the Navsup Weapon Systems Support Mech under the Department of Defense, the contract falls under NAICS code 332911. A critical requirement for the provider is full compliance with NIST SP 800-171 standards to ensure the proper protection of Controlled Unclassified Information. The response deadline for this opportunity is December 11, 2026.

Industrial Valve Manufacturing

POSTED

about 12 hours ago

DEADLINE

Valve Assembly, Mani (NSN 4820-01-429-4382) SupplyThis subcontract, managed by the Navsup Weapon Systems Support Mech under the Department of Defense, requires the supply of 38 verified Valve Assembly, Mani units identified by NSN 4820-01-429-4382. The contractor is responsible for manufacturing or sourcing these valves to meet strict technical specifications for prime contractors working on Department of the Navy projects. Compliance is mandatory regarding several military standards, including MIL-STD-2073 for packaging, MIL-STD-129 for marking, and MIL-STD-130 for the implementation of automatic identification technology for machine-readable verification. Additionally, the provider must adhere to the Buy American-Balance of Payments Program Certificate. The solicitation was posted on November 12, 2026, with a response deadline of December 11, 2026.

Conveyor and Conveying Equipment Manufacturing

POSTED

about 12 hours ago

DEADLINE

Precision Manufacture of Pintle ComponentsThis subcontract involves the precision manufacture of pintle components for prime contractors supporting NAVSUP Weapon Systems Support projects under the Department of Defense. The selected provider will utilize precision machining equipment to fabricate components identified by NIIN 010903808, ensuring all parts strictly adhere to the design and performance specifications outlined in Drawing 2074431. To ensure operational excellence and regulatory compliance, the contractor must maintain a quality system aligned with ISO 9001 standards and comply with all Buy American or Free Trade Agreement requirements. This effort falls under NAICS code 332710, with a response deadline set for December 11, 2026.

POSTED

about 12 hours ago

DEADLINE

Muzzle Clamp Assembly Manufacturing and SupplyThis subcontract involves the manufacture and supply of Muzzle Clamp Assemblies, identified by NSN 1005-01-485-8031, for prime contractors supporting Department of the Navy projects. The selected provider must utilize precision machining equipment to fabricate assemblies according to DODISS and DODSSP specifications. Key compliance requirements include applying Item Unique Identification markings per clause 252.211-7003, adhering to MIL-STD-2073 packaging standards, and providing Buy American certification to verify the items are domestic end products. The initial scope of work requires the delivery of 8 units, with a potential option to increase the quantity by an additional 100 percent. Managed under NAICS code 332999 for the Navsup Weapon Systems Support Mech within the Department of Defense, the solicitation was posted on November 12, 2026, with a response deadline of December 4, 2026.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 12 hours ago

DEADLINE

Adapter Housing Supply (NSN 3040-01-338-4512)This subcontract involves the manufacture and supply of 27 adapter housings, identified by NSN 3040-01-338-4512, for prime contractors working on Department of the Navy projects. Managed by the Navsup Weapon Systems Support Mech under the Department of Defense, the contract falls under NAICS code 332710. The supplier must adhere to strict quality and regulatory standards, including maintaining inspection systems per MIL-I-45208 and applying UID marking according to ISO/IEC 16022. All items must be packaged in accordance with MIL-STD-2073 and MIL-STD-129, with the country of origin certified per the Buy American Act. The response deadline for this opportunity is December 11, 2026.

POSTED

about 12 hours ago

DEADLINE

Specialized Metal Component Supply (W62G2T)This subcontract, managed by the Navsup Weapon Systems Support Mech under the Department of Defense, requires the manufacture and delivery of two units of specialized fabricated metal component item W62G2T. The supplier is responsible for providing these components to prime contractors supporting Department of the Navy supply contracts, ensuring all work adheres to NAICS code 332999. The contractor must maintain a government-approved inspection system and strictly comply with the Buy American-Balance of Payments Program. Specific marking requirements are mandated for Depot Level Repairable items, requiring yellow DLR text on a solid blue background in accordance with MIL-STD-129 section 4.2.2. The solicitation was posted on November 12, 2026, with a response deadline of December 11, 2026.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 12 hours ago

DEADLINE

Specialized Metal Component Supply (W25G1U)This subcontract, managed by the Navsup Weapon Systems Support Mech under the Department of Defense, involves the manufacture and delivery of four units of specialized fabricated metal component item W25G1U. The supplier is required to provide these components to prime contractors supporting Department of the Navy supply contracts, ensuring all work adheres to the Buy American-Balance of Payments Program and is verified through a government-approved inspection system. Specific technical requirements include strict adherence to MIL-STD-129 section 4.2.2 for Depot Level Repairable items, which mandates the application of yellow DLR text on a solid blue background. The contract falls under NAICS code 332999 and was posted on November 12, 2026, with a response deadline of December 11, 2026.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 12 hours ago

DEADLINE

Regulating Valve Component SupplierThis subcontract, managed by the Department of Defense under the Navsup Weapon Systems Support Mech agency, involves the supply of replacement parts, seals, gaskets, and modified internals for NSN 4820-01-482-9825 D7 regulating valves. The selected supplier is responsible for manufacturing or sourcing valve internals that adhere to OEM or Navy specifications, utilizing precision machining and high-grade alloys to ensure components are delivered certified to the designated repair facility for prime contractors on NAVSUP WSS projects. The contract falls under NAICS code 332111 and requires strict compliance with Buy American and Free Trade Agreement regulations as specified in clause 252.225-7036. Interested parties must note that the solicitation was posted on November 12, 2026, with a response deadline set for December 11, 2026.

Iron and Steel Forging

POSTED

about 12 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

NDT Inspection and Quality Testing Services

Battelle Energy Alliance–doe Cntr

POSTED

about 2 months ago

CLOSED

Aerospace Materials Testing and SEM Imaging Services

NASA Shared Services Center

POSTED

about 2 months ago

CLOSED

about 2 months ago

Sea Lice Genotyping

Solicitation # Solicitation1232SA26Q1506

USDA Forest Service

POSTED

about 2 months ago

CLOSED

about 2 months ago

Notice of Intent to Award a Sole Source

Solicitation # FY26030

Departmental Operations Acquisition Division Iii

POSTED

about 2 months ago

CLOSED

about 2 months ago

Accredited Microbiological Water Analysis Laboratory Services

250-NETWORK Contract Office 10 (36C250)

POSTED

about 2 months ago

CLOSED

about 1 month ago

Acoustic Emission Testing Equipment for Coal Mine Roof Safety

Solicitation # 75D301-26-Q-79226

CDC Office Of Acquisition Services

POSTED

about 2 months ago

CLOSED

about 2 months ago

Shasta Trinity NF Drinking Water Sampling & Testing

Solicitation # 127EAY26Q0136

USDA Forest Service

POSTED

about 2 months ago

CLOSED

about 2 months ago

DI-ELECTRIC TESTING SERVICES OF EQUIPMENT AND VEHICLES

Solicitation # PAN413-26-P-0000-026951

0413 Aq Hq Rco-Hi

POSTED

about 2 months ago

CLOSED

about 1 month ago

First Article Testing (FAT) and Evaluation

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 2 months ago

CLOSED

Production Lot Testing and Quality Validation

NUCLEAR REACTOR PROGRAM

POSTED

about 2 months ago

CLOSED

about 1 month ago

First Article Test (FAT) Support and Validation

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 2 months ago

CLOSED

YOKE, CONTROL STICK

Solicitation # SPE4A7-20-T-003W

Defense Logistics Agency

POSTED

about 2 months ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Get full access

Join 750+ contractors already using CLEATUS