Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 30 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Precision Gas Control Components Supplier

Active

Federal

Response Deadline09/17/2026, 04:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract under the Department of Defense involves the supply of high-precision sensors, electronic controllers, and bi-directional closed-loop gas infusion valves for laboratory equipment projects at the US Air Force Academy. The supplier is responsible for manufacturing and delivering specialized O2/CO2 sensors and programmable logic controllers designed to maintain dynamic atmospheric gas exposure profiles, ensuring all components meet strict laboratory-grade precision and safety standards. The physical components are delivered directly to the prime manufacturer. This opportunity falls under NAICS code 334413 and is managed by the FA7000 10 Cons Lgc agency. The solicitation was posted on September 14, 2026, with a response deadline of September 17, 2026, for performance in the 80840 zip code area.

General Info

DoD subcontract for high-precision sensors and controllers for US Air Force Academy projects.

Agency

Department Of Defense → FA7000 10 Cons LgcView Agency

NAICS

334413 - Semiconductor and Related Device ManufacturingView NAICS

Place of Performance

0, CO, 80840, USA

Set-Aside

NONE

Documents

This scope was carved out of NOTICE_OF_INTENT_TO_SOLE_SOURCE_FY26_USAFA_DFBI_BioSpherix_OxyCycler.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

NOTICE OF INTENT TO SOLE SOURCE FY26 USAFA DFBI BioSpherix OxyCycler & C-Chamber System

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedSep 14

subcontract

Response DeadlineSep 17

Submission deadline

Response Deadline

09/17/2026, 04:00:00 PM UTCin about 16 hours

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → FA7000 10 Cons Lgc

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → FA7000 10 Cons Lgc

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies high-precision sensors, bi-directional closed-loop gas infusion valves, and electronic controllers for prime contractors on US Air Force Academy laboratory equipment projects. Manufactures and delivers specialized O2/CO2 sensors and programmable logic controllers for dynamic atmospheric gas exposure profiles. Requires laboratory-grade precision and safety standards. Delivers physical components to the prime manufacturer.

Similar Contracts

Same NAICS industry code

Supply of Electronic Shielding Gasket (NSN 5999016806052)This subcontract involves the manufacture or procurement of an Electronic Shielding Gasket, identified by NSN 5999016806052, for prime contractors supporting Active Devices Division projects within the Department of Defense. The contractor is responsible for ensuring the part is packaged according to MIL-STD-2073-1E and marked per MIL-STD-129, while maintaining compliance with RP001 DLA Packaging Requirements and 29 CFR 1910.1200 regarding hazardous materials. The final product is designated for use in MH-60 Romeo aircraft and must be delivered to NAVSUP FLTLGCEN Jacksonville. This opportunity falls under NAICS code 334413 and was posted on September 16, 2026, with a response deadline of September 28, 2026.

ACTIVE DEVICES DIVISION

POSTED

about 7 hours ago

DEADLINE

Supply of Digital Microcircuits (BAE Systems P/N 9931-BGWV)This subcontract involves the procurement and delivery of 12 units of BAE Systems digital microcircuits, part number 9931-BGWV, for the Department of Defense Active Devices Division. The supplier is responsible for providing these components to prime contractors delivering to the DLA Land and Maritime Active Devices Division, with performance taking place in Columbus, Ohio. A critical requirement of the contract is the submission of traceability documentation or a test report using DLA Land and Maritime Form 918, which must be provided 15 days before the final delivery of the microcircuits. The opportunity was posted on September 16, 2026, with a response deadline of September 28, 2026, under NAICS code 334413.

ACTIVE DEVICES DIVISION

POSTED

about 7 hours ago

DEADLINE

MICROCIRCUIT, DIGITAL

Solicitation # SPE7M5-26-T-503L

ACTIVE DEVICES DIVISION

POSTED

about 7 hours ago

DEADLINE

LIGHT, INDICATOR

Solicitation # SPE8E7-26-T-3923

Defense Logistics Agency

POSTED

about 7 hours ago

DEADLINE

DISPLAY, OPTOELECTRONIC

Solicitation # SPE7L3-26-T-256J

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 7 hours ago

DEADLINE

CONTACT, ELECTRICAL

Solicitation # SPE7M1-26-U-6131

MARITIME SUPPLY CHAIN

POSTED

about 7 hours ago

DEADLINE

LIGHT, INDICATOR

Solicitation # SPE8E7-26-T-3917

Defense Logistics Agency

POSTED

about 7 hours ago

DEADLINE

MICROCIRCUIT, DIGITAL

Solicitation # SPE7M5-26-T-502Z

ACTIVE DEVICES DIVISION

POSTED

about 7 hours ago

DEADLINE

Manufacture and Supply of Connector Receptacles (NSN 1HM 5935-00-494-6854 L1)This subcontract involves the manufacture and supply of connector receptacles for US Navy hardware projects under NSN 1HM 5935-00-494-6854 L1. The selected provider must fabricate components according to exact National Stock Number specifications and the Technical Data Package, utilizing precision machining equipment to meet Critical Safety Item tolerances. Compliance with FAR 52.246-11 quality standards is required, and the contractor is responsible for submitting data via the ECDS system and providing samples for Destructive Government First Article Testing. The opportunity is managed by the Navsup Weapon Systems Support Mech within the Department of Defense under NAICS code 334413. Interested parties must submit their responses by September 29, 2026. The final deliverables include the finished connector receptacles and the required FAT samples.

Navsup Weapon Systems Support Mech

POSTED

about 12 hours ago

DEADLINE

Supply of Optoelectronic Components and Raw MaterialsThis subcontract involves the supply of raw materials, sensors, and optical components for prime contractors supporting NAVSUP Weapon Systems Support projects. The scope includes sourcing high-precision optical sensors, LED/Laser diodes, and electronic housings that strictly adhere to TDP Version No. 006 specifications. The provider is responsible for delivering component kits to the prime manufacturer while ensuring all materials are accompanied by proper certifications. The agreement requires full compliance with DFARS 252.225-7035 Buy American-Free Trade Agreements. Managed under NAICS code 334413 for the Department of Defense, the contract was posted on September 16, 2026, with a response deadline of October 14, 2026.

Navsup Weapon Systems Support Mech

POSTED

about 12 hours ago

DEADLINE

Manufacture of Optoelectronic Switches (NSN 5980-01-616-5969)This subcontract involves the manufacture of 60 Optoelectronic Switch assemblies (NSN 5980-01-616-5969) for prime contractors supporting NAVSUP Weapon Systems Support projects. The production process requires fabrication and assembly based on TDP Version No. 006, utilizing precision tooling and testing equipment to ensure functionality in accordance with Cage 53711. The project falls under NAICS code 334413 and is managed by the Department of Defense. All deliverables must adhere to strict contract quality requirements and comply with Buy American and Free Trade Agreements. The response deadline for this opportunity is October 14, 2026.

Navsup Weapon Systems Support Mech

POSTED

about 12 hours ago

DEADLINE

59--SWITCH,OPTOELECTRON

Solicitation # N0010425RND69

This firm-fixed-price solicitation from the Navsup Weapon Systems Support Mechanicsburg is for the manufacture and procurement of optoelectronic switches. The contract requires adherence to specific drawing data and cage code 53711, with physical identification following MIL-STD-130 and packaging according to MIL-STD 2073. A one-year warranty from the date of delivery is required for these noncomplex supplies. The procurement is conducted under Emergency Acquisition Flexibilities and is certified for national defense under the Defense Priorities and Allocations System. Award consideration is limited to authorized distributors of the original manufacturer, who must provide proof of authorization on company letterhead. The contractor is responsible for all inspection and quality assurance, maintaining records for 365 days after final delivery.

Navsup Weapon Systems Support Mech

POSTED

about 12 hours ago

DEADLINE

More opportunities from Department Of Defense → FA7000 10 Cons Lgc

Same awarding agency

Instrumentation Testing and Technical Training ServicesThis subcontract for Instrumentation Testing and Technical Training Services supports hypersonic projects at the US Air Force Academy. The selected provider will perform on-site installation and commissioning for prime contractors, specifically focusing on testing startup loads and functionality within the Mach 6 Ludwig Tube tunnel. Key technical requirements include conducting check-out testing to verify steady-state data acquisition and providing comprehensive technical training to USAFA personnel on the operation of balance and DAQ systems. The contract is managed by the Department of Defense under agency FA7000 10 Cons Lgc and is categorized under NAICS code 541330. Performance will take place at the USAF Academy in Colorado. The final deliverables for this engagement consist of a completed test report and a cohort of fully trained facility operators.

Engineering Services

POSTED

about 12 hours ago

DEADLINE

NI LabVIEW DAQ System Provider & IntegratorThis subcontract involves the supply and integration of electronic acquisition systems for prime contractors supporting US Air Force Academy hypersonic projects. The provider is responsible for delivering NI cDAQ chassis equipped with NI-9239 or NI-9237 data acquisition cards, ensuring the hardware is fully configured for compatibility with NI LabVIEW software to support a 10 kHz bandwidth and 80ms acquisition windows. The project is managed under the Department of Defense through the FA7000 10 Cons Lgc agency, with performance taking place at the USAF Academy in Colorado. This technical requirement falls under NAICS code 334220 and requires the delivery of a fully integrated hardware and software interface.

Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

about 12 hours ago

DEADLINE

Six-Component Hypersonic Force Balance ManufacturerThis subcontract involves the design and manufacture of a high-precision, six-component force balance for prime contractors supporting US Air Force Academy hypersonic facility projects. The required hardware must feature a one-inch outside diameter and be capable of capturing steady-state force and moment data within an 80ms run time, maintaining a minimum load resolution bandwidth of 10 kHz. The selected provider is responsible for the fabrication, calibration, and delivery of one calibrated force balance along with electronic PDF user interface drawings. This project is managed under the Department of Defense and is to be performed at the USAF Academy location.

Analytical Laboratory Instrument Manufacturing

POSTED

about 12 hours ago

DEADLINE

USAFA Mach 6 Ludwieg Tube (M6LT) Force Balance

Solicitation # FA700026Q0081

Solicitation FA700026Q0081 is a firm-fixed-price purchase order for a six-component force balance system to be used at the Mach 6 Ludwig Tube facility within the US Air Force Academy Department of Aeronautics. This acquisition is a 100 percent small business set-aside under NAICS code 334519. The required system must be a turnkey solution featuring a 1-inch outside-diameter balance capable of acquiring steady-state force and moment data within 80 milliseconds, with a minimum load resolution bandwidth of 10 kHz. The system must be fully compatible with National Instruments LabVIEW software and cDAQ chassis. The winning contractor will be required to collaborate with the government to finalize design specifications, including load ranges and safety factors, and must provide check-out testing and training upon delivery. Delivery is requested by August 31, 2027. The government will utilize a phased evaluation methodology to determine the best value based on price, past performance, and technical capability. In the first phase, quotes are ranked by price; in the second phase, the three lowest-priced quotes are evaluated for technical acceptability and past performance. Award is made to the lowest-priced offeror that is technically acceptable and represents the best value. Submission requirements include a signed SF1449, technical capability documentation, a Buy American Certificate, and verification of active SAM registration. Payment will be based on the completion of CLINs via the Wide Area WorkFlow system, and progress payments are not allowed. All products must comply with the Buy American Statute, and the government reserves the right to cancel the solicitation if funds are not available.

Other Measuring and Controlling Device Manufacturing

POSTED

about 12 hours ago

DEADLINE

F.O.B. Destination Freight ServicesThis subcontract for F.O.B. Destination Freight Services involves the transportation of over 30,000 square feet of heavy and bulky flooring materials for prime contractors operating on United States Air Force Academy projects. The service provider is responsible for hauling materials from the manufacturer to the 10th Civil Engineer Squadron in Colorado using freight or flatbed trucks, while managing all loading and unloading processes. The contract is managed by the Department of Defense under agency FA7000 10 Cons Lgc and falls under NAICS code 484220. Performance of these services will take place in the 80840 zip code area, with a response deadline set for September 25, 2026.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Portable Stadium Flooring Manufacturer/SupplierThis subcontract through the Department of Defense involves the manufacture and supply of portable stadium flooring for prime contractors working on United States Air Force Academy facility projects. The supplier is responsible for providing between 30,000 and 60,000 square feet of flooring that meets specific government salient characteristics, supported by detailed specification sheets, product brochures, and descriptive literature. All provided materials must be certified as domestic end products in compliance with the Buy American Act. The contract is categorized under NAICS code 326199 and is designated for performance at the Air Force Academy location in zip code 80840.

All Other Plastics Product Manufacturing

POSTED

DEADLINE

USAFA Portable Stadium Flooring

Solicitation # FA700026Q0021

Solicitation FA700026Q0021 is a firm-fixed-price request for the procurement of portable stadium flooring for the United States Air Force Academy in Colorado. The requirement consists of a primary purchase of 30,000 square feet of flooring with an option for an additional 30,000 square feet. The flooring must be new, UV-protected, and weather-resistant, featuring a non-slip surface texture and a minimum load rating of 600 PSI to protect synthetic turf from weight and abrasion. Technical specifications require internal interlocking panels weighing 100 lbs or less, with a preference for light grey or white coloring. The contractor must also provide all necessary installation tools and conduct setup and teardown training for USAFA personnel. The contract will be awarded using Simplified Acquisition Procedures based on the Lowest Price Technically Acceptable (LPTA) basis. Evaluation focuses on the ability to meet all salient characteristics and an acceptable past performance rating via the Supplier Performance Risk System. Delivery is F.O.B. Destination to the 10th Civil Engineer Squadron, with all panels required to be shipped on new, clean pallets. Invoicing and payment will be processed electronically through the Wide Area WorkFlow system. This acquisition is full and open to all business sizes, and quotes must be submitted to the contracting office by September 25, 2026.

All Other Plastics Product Manufacturing

POSTED

DEADLINE

Specialized Scientific Equipment FreightThis subcontract involves the specialized transport and delivery of OxyCycler C42 systems, specifically the C-Chamber and Controller units, for prime contractors supporting US Air Force Academy laboratory projects. The services are designated for the USAFA Department of Biology and require high-standard logistics, including white-glove shipping, climate-controlled transport, and the use of padded, shock-absorbing crates to ensure the secure handling of fragile scientific instrumentation. The project is managed under the Department of Defense agency FA7000 10 Cons Lgc and falls under NAICS code 484220. Performance is centered in the 80840 zip code area, with a response deadline set for September 17, 2026.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

in about 16 hours

NOTICE OF INTENT TO SOLE SOURCE FY26 USAFA DFBI BioSpherix OxyCycler & C-Chamber System

Solicitation # NOTICE_OF_INTENT_TO_SOLE_SOURCE_FY26_USAFA_DFBI_BioSpherix_OxyCycler

The 10th Contracting Squadron for the US Air Force Academy intends to award a firm-fixed-price commercial contract to BioSpherix, LLC for the procurement of two OxyCycler C42 Dynamic/Pre-programmable O2/CO2 Controllers and Single 2-Shelf C-Chamber systems, part number CAT-C421C274. This equipment is required by the Department of Biology to study the effects of hypoxia and hyperoxia through precise, dynamic control of atmospheric gas concentrations, including O2, CO2, and N2, utilizing bi-directional closed-loop gas infusion control. The systems must also support pre-programmable cycles and profiles and be upgradeable to include a second independent chamber. The government is pursuing a sole source acquisition based on proprietary technology and the need to avoid substantial duplication of costs, with the total value falling below the Simplified Acquisition Threshold. The anticipated award date is on or before September 30, 2026. While a formal solicitation will not be posted, the government is accepting capability statements from responsible sources until 10:00 AM MDT on September 17, 2026. Interested parties must provide clear and convincing evidence that competition would be advantageous to the government and must maintain current registration in the System for Award Management.

Analytical Laboratory Instrument Manufacturing

POSTED

DEADLINE

in about 16 hours

FY26 USAFA DF/DFT Projectors and Soundbars

Solicitation # FA700026Q0110

Solicitation FA700026Q0110 is a Firm-Fixed-Price request for quote issued by the United States Air Force Academy (USAFA) Dean of Faculty Technology Office for the procurement, professional installation, and disposal of audiovisual equipment. The project requires the purchase of 285 Epson BrightLink 1485Fi Interactive Projectors and 249 AVerMedia GS68-C Soundbars to be installed across 243 classrooms in Buildings 2354 and 2355. The scope of work includes turn-key installation, electrical outlet installation compliant with local building codes, and the removal and haul-away of 270 legacy projectors to the Defense Reutilization and Marketing Office (DRMO) at Fort Carson, Colorado. The estimated contract value is between 850,000 and 950,000 dollars, with hardware delivery required by October 14, 2026, and installation services performed between October 15, 2026, and January 12, 2027. This acquisition is set aside for small business concerns and utilizes a phased evaluation methodology to determine the best value based on price, past performance, and technical capability. Technical acceptability is based on full compliance with the Statement of Work and adherence to supply chain security and FASCSA requirements. The government will initially rank quotes by price and evaluate the three lowest-priced offers for technical and past performance suitability. Key administrative requirements include the submission of a Trade Agreements Act certification, the use of the Wide Area WorkFlow system for invoicing, and the provision of Unique Item Identifiers for high-value equipment. All shipments are FOB Destination to the USAF Academy in Colorado.

Audio and Video Equipment Manufacturing

POSTED

DEADLINE

Legacy Projector Removal and TransportThis subcontract involves the removal and transport of legacy audiovisual equipment for prime contractors operating on United States Air Force Academy projects. The scope of work requires the de-installation of 270 legacy projectors along with their associated cabling and mounting hardware. Following removal, the contractor is responsible for packing and hauling the equipment to the Defense Reutilization and Marketing Office at Fort Carson, Colorado. Successful completion of the contract is contingent upon the delivery of cleared classrooms and the provision of a signed DD Form 1348-1A receipt from the receiving office. The project is categorized under NAICS code 484220 and is managed by the Department of Defense under the agency FA7000 10 Cons Lgc, with performance taking place at the USAF Academy in Colorado.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Turn-key Classroom AV InstallationThis subcontract for the Department of Defense involves the turn-key installation, configuration, and testing of audiovisual equipment at the United States Air Force Academy. The scope of work includes mounting 270 projectors and 244 soundbars across 243 classrooms, ensuring all systems are fully operational. Technical requirements include electrical integration and grid connections coordinated through 10 CES via USAFA Form 332. The selected provider must deliver a comprehensive post-installation package containing all relevant serial numbers and verified test results. This project falls under NAICS code 238210 and is being managed by the FA7000 10 Cons Lgc agency. The performance location is situated at the USAF Academy in Colorado.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS