This Government Contract opportunity from North Carolina was posted on June 26, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Preventative Maintenance for Passenger and Freight Elevators

Closed

State & Local

Submission Closed07/21/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 811310

New

RFQ#3857 Replace Walk-In Cooler and Freezer Doors

Solicitation # RFQ#3857

Management & Training Corporation (MTC) is seeking a subcontractor for RFQ#3857 to replace three walk-in refrigeration doors at the Charleston Job Corps Center in Charleston, West Virginia. The scope of work requires the removal and disposal of existing doors and the installation of one walk-in cooler door and two walk-in freezer doors, including all necessary hardware such as hinges, latches, gaskets, closers, and thresholds. The contractor must provide all labor, materials, equipment, and supervision to ensure temperature integrity and energy efficiency, while adhering to OSHA safety requirements and refrigeration industry standards. A minimum one-year workmanship warranty and manufacturer warranty certificates are required upon completion. This is a small business set-aside opportunity under NAICS code 811310, open to various categories including SDB, WOSB, HUBZone, and SDVOSB. The award will be based on best value, with a lump sum fee structure. Bids must be submitted via email to Wendy Lawrence by September 28, 2026, at 3:00 PM EST. Required submission documents include a bid sheet, proof of insurance, three references, a W-9, a self-certification form, and acceptance of terms and conditions. The contract is subject to Service Contract Labor Standards under Wage Determination 2015-4347 and requires compliance with FAR clauses regarding the Buy American Act, combating trafficking in persons, and the protection of sensitive government information. Invoicing is to be submitted on a weekly or bi-weekly basis.

Management & Training Corporation

POSTED

DEADLINE

48--VALVE REGULATING SY, IN REPAIR/MODIFICATION OF

Solicitation # N0010426QYACP

This presolicitation notice from the Department of Defense, specifically Navsup Weapon Systems Support Mech, concerns the repair or modification of one regulating valve system under NSN 7H-4820-015869445. The government intends to solicit and negotiate with a single source under FAR 6.302-1 because it does not own the necessary data rights and has determined that purchasing such rights or reverse engineering the part is uneconomical. Delivery is specified as FOB Origin. Interested parties may submit proposals, quotations, or capability statements within 45 days of publication, or 30 days if awarded under an existing Basic Ordering Agreement. While the government is not currently using FAR Part 12 for commercial item acquisition, parties may notify the contracting officer of a commercial solution within 15 days. Standardized documents may be obtained via the DoD Single Stock Point, though specific patterns and drawings are not stocked there. This action may be subject to various Free Trade Agreements and the Buy American Act.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

16--TORQUE LIMITER ASSE, IN REPAIR/MODIFICATION OF

Solicitation # N0038326QBB23

This presolicitation notice, issued by the Navsup Weapon Systems Support under the Department of Defense, seeks the repair or modification of 133 torque limiter assemblies. The requirement is identified by NSN 7R-1680-015757642-GF and follows TDP version 001, with delivery terms specified as FOB Origin. The solicitation, numbered N0038326QBB23, was posted on September 18, 2026, with a response deadline of October 22, 2026. Interested parties should coordinate with the primary point of contact, Brett Killen, at the office located in Philadelphia, Pennsylvania.

Navsup Weapon Systems Support

POSTED

DEADLINE

28--ENGINE,DIESEL, IN REPAIR/MODIFICATION OF

Solicitation # N0038326QPD19

This solicitation, number N0038326QPD19, is for the repair or modification of two diesel engines under NSN 7R-2815-014553705-SX, with delivery terms set as FOB Origin. The requirement is managed by the Navsup Weapon Systems Support office in Philadelphia. Because the items are flight critical and the government lacks sufficient technical data for open competition, the contract requires government source approval prior to award. Only previously approved sources have been solicited, and any new applicants must submit detailed information according to the NAVSUP WSS Source Approval Information Brochures to be considered. Proposals must be submitted by November 3, 2026. The government will not use FAR Part 12 policies for this acquisition, though interested parties may notify the contracting officer of their ability to provide a commercial item within 15 days of the notice.

Navsup Weapon Systems Support

POSTED

DEADLINE

Annual MSA SCBA Flow Testing and Repair Services

Solicitation # FA449727Q0003

The 436th Contracting Squadron intends to issue a sole source direct award to Witmer Public Safety Group, Inc. for annual MSA Self-Contained Breathing Apparatus flow testing, certification, and repair services at Dover Air Force Base, Delaware. The requirement specifically mandates that all services be performed by authorized MSA C.A.R.E. certified technicians qualified to service and repair MSA G1 systems. This notice serves as an intent to award rather than a request for competitive quotations, though interested parties may submit capability information to challenge the sole source determination. It is important to note that funds are not currently available for this requirement, and no contract award will be made until such funding is secured. The government reserves the right to cancel the notice at any time and will not reimburse parties for costs incurred during the response process.

POSTED

DEADLINE

USDA-ARS-SEA Preventive Maintenance Services for the Main Switchgear

Solicitation # 1232SA26Q1472

Solicitation 1232SA26Q1472 is a Request for Quotation issued by the USDA-ARS-SEA for preventive maintenance services for a Caterpillar Model AA main switchgear, Serial No. 32269, located at the USNPRC Building 2 in Athens, Georgia. The scope of work requires a certified technician to service the entire unit, repair HMI programming issues causing false alarms, and perform an infrared scan of the equipment under load. The contractor must provide a comprehensive service report and adhere to strict USDA Biosecurity and ARS Facilities Design Standards, specifically those pertaining to Bio-Safety Level 2, 3, ABSL-3, and BSL-3Ag research environments. The period of performance is from September 24, 2026, to March 23, 2027, with a requirement to guarantee all work for at least one year following final acceptance. This is an unrestricted acquisition under NAICS code 811310, though it includes a price evaluation preference for HUBZone small business concerns. Award will be based on a fair and reasonable price, technical acceptability—which requires documented certification to work on the specific Caterpillar model—and an adjectival rating of past performance. Quotations must be submitted via email to Jacob Toft by September 22, 2026, and must include a firm fixed price on company letterhead, a completed SF-1449, and a Sam.gov Unique Entity ID. The contract incorporates various FAR and AGAR clauses, including Buy American requirements and specific compliance certifications regarding anti-discrimination and DEI standards.

POSTED

DEADLINE

J036--Laundry Equipment Maintenance Service

Solicitation # 36C24627Q0039

246-NETWORK Contracting Office 6 (36C246)

POSTED

DEADLINE

RFB-IS-27200184 - 937013/TURBINE MOTOR REPAIRS AT SAN GABRIEL VALLEY AIRPORT - Closing: 10/5/2026 12:00 PM

Solicitation # 232079

Los Angeles County is seeking proposals for contract 937013 regarding turbine motor repairs at the San Gabriel Valley Airport. This solicitation, identified by number 232079, is managed by the agency's internal services department and will be performed in Los Angeles, California. Interested parties must submit their responses by the deadline of October 5, 2026, at 7:00 PM. DeAnna James serves as the primary point of contact for this project, and further details can be accessed through the official procurement portal.

POSTED

DEADLINE

RFP_W6856-264833 - Inspection, maintenance, and repair of lifting equipments - National Defence

Solicitation # WS5721670670

The Government of Canada, through the Department of Public Works and Government Services, has issued solicitation WS5721670670 for the inspection, maintenance, and repair of lifting equipment for National Defence. This federal contract is focused on performance within Québec and is managed by the primary contracting authority, Sonia Langis. The solicitation was posted on September 18, 2026, and requires responses to be submitted by the deadline of October 14, 2026, at 7:00 PM. Interested parties can find further details and submission guidelines through the CanadaBuys portal.

Department of Public Works and Government Services

POSTED

DEADLINE

Preventative and Corrective Maintenance of All Refrigeration Equipment at Halifax and Ketch Harbour Site

Solicitation # 26-58098

The National Research Council Canada is soliciting proposals for the preventative and corrective maintenance of all refrigeration equipment at two Nova Scotia locations: 1411 Oxford Street in Halifax and the Marine Research Station at 270 Sandy Cove Road in Ketch Harbour. The scope of work encompasses a wide array of equipment, including air conditioning systems, heat pumps, ultra-low freezers, cryogen systems, and specialized controlled environment chambers. Key deliverables include bi-monthly preventative maintenance visits and bi-annual seasonal services for chillers, with specific deadlines for spring start-ups by May 15th and fall shut-downs by October 15th. The contract is structured for an initial two-year term starting from the date of award, with the option for five additional one-year extensions at the discretion of the government. Award selection is based on the lowest evaluated price among bidders who meet all mandatory technical criteria. These requirements include providing two reference projects from similar facilities, a current Letter of Good Standing with the provincial Construction Safety Association, and the deployment of three licensed refrigeration technicians with Inter-Provincial Red Seal Certificates and Ozone-Depleting Substances handling certifications. Additionally, at least one technician must be factory-trained for Conviron, Revco, and Ingersoll-Rand equipment. Proposals must be submitted electronically by September 23, 2026, divided into separate technical and financial volumes to avoid disqualification. An optional site visit was scheduled for September 2, 2026, requiring attendees to provide valid identification and full personal protective equipment.

National Research Council of Canada

POSTED

DEADLINE

VALVE ASSEMBLY — 4820016904787 — N0010426QLC48

Solicitation # N0010426QLC48

This solicitation is for the repair of a Valve Assembly for the Department of Defense, specifically through the Navsup Weapon Systems Support Mech. The government requires a Repair Turnaround Time of 63 days, measured from the physical receipt of the asset to final acceptance. The contract is a firm-fixed-price agreement that includes Government Source Inspection and requires the contractor to be an authorized distributor of the original manufacturer. Key requirements include adherence to MIL-STD-130 for marking and MIL-STD 2073 for packaging. The contractor must provide a quote that includes the total price and the specific turnaround time, as well as a proposed price reduction amount per unit per month for any unexcusable delays in delivery. Additionally, the government may exercise an option to increase the quantity of supplies at the specified unit price within 365 days after receipt.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

COMPRESSOR,ROTARY — 4310014850856 — N0010426QJC35

Solicitation # N0010426QJC35

This solicitation, issued by the Navsup Weapon Systems Support Mech under Emergency Acquisition Authority, seeks a contractor for the repair of a rotary compressor. The government requires a Repair Turnaround Time (RTAT) of 122 days, measured from the physical receipt of the asset to final government acceptance. The contract is a firm-fixed-price agreement requiring Government Source Inspection and adherence to CMMC Level 2 certification. Contractors must provide a total quote amount, the specific RTAT, and pricing for testing and evaluation in the event the item is determined to be beyond economical repair. Failure to meet the required RTAT will result in a price reduction per unit per month, to be implemented via a reconciliation modification. All freight is FOB Origin and handled by the Navy per the Commercial Asset Visibility Statement of Work.

Navsup Weapon Systems Support Mech

POSTED

about 16 hours ago

DEADLINE

in 17 days

AI Contract Overview

The contract entails providing comprehensive preventative maintenance services for 64 passenger and freight elevators, requiring regular lubrication, adjustments, inspections, and detailed documentation to ensure optimal functionality and safety compliance. Work must follow a strictly defined schedule, with all activities aligned to established safety standards and regulatory requirements. The contract is classified as a subcontract under NAICS code 811310 and is issued by North Carolina Central University, with responses due by July 21, 2026. The solicitation was posted on June 26, 2026, and performance is expected to be carried out across the university’s facilities in North Carolina, though specific location details are not provided.

General Info

Maintain 64 elevators per strict schedule, meet safety standards, subcontract via NCCU, response due July 21, 2026

Agency

North Carolina Central UniversityView Agency

NAICS

811310 - Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and MaintenanceView NAICS

Place of Performance

NC, USA

Set-Aside

NONE

Documents

This scope was carved out of 61-RFP25010.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Elevator Services

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed

PostedJun 26

subcontract

Response DeadlineJul 21

Deadline has passed

Submission Closed

07/21/2026, 07:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyNorth Carolina Central University

ContactsNo contacts available

OfficeN/A

Organization / Agency

North Carolina Central University

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Provide routine maintenance including lubrication, adjustment, inspection, and documentation for 64 elevators. Adherence to a defined schedule and compliance with safety standards is required.

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS