This Government Contract opportunity from Department Of Defense was posted on May 20, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Preventive Maintenance Services for X-ray Film Processor

Closed

Federal

Submission Closed05/28/2026, 12:00:00 AM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 811310

New

SLED

Repair Leaking LP Valve Plate / Reinstall the Compressor

Solicitation # SRC0000035649

Solicitation SRC0000035649 is a procurement request issued by the Alabama State Military Department under the Army MCA Real Property Operations and Maintenance office for the repair of a leaking LP valve plate and the reinstallation of a compressor. The project is categorized under NAICS code 811310 and will be performed within the state of Alabama. Interested parties must submit their responses via the Alabama Buys electronic system by the deadline of August 31, 2026. The contract is governed by standard Alabama Quick Quote boilerplate terms and conditions, which include specific requirements for bidder certifications, electronic submission, and compliance with Beason-Hammon and E-Verify regulations. The agreement specifies that the governing law is that of the state of Alabama and includes standard clauses regarding non-appropriation, proration, and the cancellation rights of the agency. Primary coordination for this solicitation is managed by Cassie Owens.

Army MCA_App 01_Real Property Operations & Maintenance, State Military Department

POSTED

DEADLINE

The State of New Hampshire, Department of Natural and Cultural Resources, Division of Parks and Recreation (the "State" and "Division"), is seeking written proposals from qualified vendors to provide industrial motor and electrical control mainten...

Solicitation # 656bdc64-f1c6-40c6-85f2-429f59c01a75

The State of New Hampshire, Department of Natural and Cultural Resources, Division of Parks and Recreation, is seeking a qualified vendor to provide comprehensive industrial motor and electrical control maintenance for the snowmaking system at Cannon Mountain Ski Area. The scope of work includes preventive maintenance, inspection, diagnostic testing, repair, overhaul, and emergency response for industrial electric motors ranging from 50 HP to 1,250 HP from manufacturers such as GE, US Motors, Siemens, TECO, and Marathon. The selected vendor must provide all necessary labor, supervision, tools, and materials, ensuring all work adheres to manufacturer recommendations, industry standards, and applicable safety regulations. The contract is envisioned as a three-year agreement starting November 15, 2026, with the state holding an option for two additional one-year extensions, pending approval from the NH Governor and Executive Council. Award decisions will be based on the best overall value, with evaluation weighted toward pricing (50%), experience and qualifications (25%), technical approach (15%), and references (10%). Vendors must provide proof of Commercial General Liability and Workers' Compensation insurance and submit a detailed proposal including a pricing sheet for labor rates, shop services, and parts markups. The final agreement will be based on the State of New Hampshire Form P-37.

Department Of Natural & Cultural Resources

POSTED

DEADLINE

Wastewater Treatment Equipment Repair (Air Header, Aerators, and Skimmers)

Dept Of Natural Resources

POSTED

DEADLINE

Laboratory Equipment Maintenance and Decontamination Services

244-NETWORK Contract Office 4 (36C244)

POSTED

DEADLINE

Emergency Vehicle Lighting and Siren Installation Services

0906 Aq Co Det B Contracti

POSTED

DEADLINE

14--ADAPTER ASSEMBLY,MI, IN REPAIR/MODIFICATION OF

Solicitation # N0038326QLB19

This presolicitation notice, issued by the Navsup Weapon Systems Support under the Department of Defense, concerns the repair and modification of 64 adapter assemblies. The contract is identified by NSN 7R-1440-014553646-QE and references TDP version 001 and reference number 74A730501-1003. Delivery terms are specified as FOB Origin. The solicitation, numbered N0038326QLB19, was posted on September 11, 2026, with a response deadline of October 27, 2026. The contracting office is located in Philadelphia, Pennsylvania, and the primary point of contact for this requirement is Tia Johnson.

Navsup Weapon Systems Support

POSTED

DEADLINE

FY26 Pneumatic Tube System Maintenance and Software Support Svc.

Solicitation # 36C24826Q1247

The Department of Veterans Affairs is seeking quotations for preventive maintenance and software support services for the TransLogic/Swisslog pneumatic tube system located at the C.W. Bill Young VA Medical Center in Bay Pines, Florida. Under solicitation number 36C24826Q1247, the government intends to sole source the award to TransLogic Corporation, though other capable sources may submit quotations and capability statements by September 15, 2026. The initial period of performance is scheduled from September 30, 2026, through September 29, 2027, with the possibility of four additional 12-month option periods. Interested parties must demonstrate the specific capability and authorization to provide both the physical maintenance of the system and the necessary software support.

248-NETWORK Contract Office 8 (36C248)

POSTED

DEADLINE

J035--ELEVATOR MAINTENANCE, INSPECTION, & REPAIR SERVICE VA SIERRA NEVADA HEALTH CARE SYSTEM

Solicitation # 36C26126Q1078

The Department of Veterans Affairs Network Contracting Office 21 is seeking a contractor to provide comprehensive elevator maintenance, inspection, and repair services for 17 elevators and one cartlift at the VA Sierra Nevada Health Care System in Reno, Nevada. This Service-Disabled Veteran-Owned Small Business (SDVOSB) set-aside contract, under NAICS code 811310, includes a base period of performance from October 1, 2026, to September 30, 2027, with four subsequent option years extending through September 30, 2031. The scope of work requires the provision of a full-time journeyman mechanic during standard operating hours, 24/7 callback service, and support for annual and five-year safety inspections. All work must adhere to NFPA, Joint Commission, and VHA directives, as well as original equipment manufacturer specifications. To be considered a viable source, applicants must provide proof of Nevada state licensure, a capabilities statement, and a list of similar past performance projects. The contractor must have at least ten years of experience within the last twelve years maintaining similar equipment and must designate a Contract Manager with full authority for daily operations. Financial terms include a price schedule for monthly maintenance and a not-to-exceed limit of 20,000 dollars per year for miscellaneous repairs, with parts billed at actual cost plus a maximum 10 percent markup. Performance is monitored via a Quality Assurance Surveillance Plan focusing on outcomes, with critical activities like entrapment response requiring a 100 percent acceptable quality level.

261-NETWORK Contract Office 21 (36C261)

POSTED

DEADLINE

Z--CA-MERCED NWR-PUMP REPAIRS CVPIA

Solicitation # 140FS126Q0171

The U.S. Fish and Wildlife Service is seeking a contractor to provide deep well diagnostic, maintenance, repair, and rehabilitation services for nine government-owned deep well systems at the Merced National Wildlife Refuge in Merced County, California. The scope of work includes performing video inspections, flow and drawdown testing, electrical inspections, and well redevelopment. Additionally, the contractor is responsible for the replacement of pump motors, control boxes, and electrical services, as well as the final testing and commissioning of the systems. All work must be completed by November 15, 2026, with onsite hours typically scheduled from Monday through Friday, 8:00 a.m. to 4:30 p.m. Solicitation 140FS126Q0171 is an unrestricted competition under NAICS code 811310, with quotes due by September 18, 2026. The contract utilizes a firm-fixed-price structure consisting of base CLINs for diagnostics and optional CLINs for specific repairs. Award will be based on the best value, where combined experience, technical capability, and past performance from the last five years are weighted more heavily than price. Requirements include the submission of detailed diagnostic reports, electrical schematics, and as-built drawings. The selected contractor must be registered in the System for Award Management and submit all payment requests electronically through the Invoice Processing Platform.

POSTED

DEADLINE

48--VALVE,BUTTERFLY, IN REPAIR/MODIFICATION OF

Solicitation # N0010426QLC43

The Department of Defense, through Navsup Weapon Systems Support Mech, is issuing a presolicitation notice for the repair or modification of 75 butterfly valves under NSN 7H-4820-012448339, TDP VER 005. The government intends to negotiate with a single source under FAR 6.302-1 because it does not own the necessary data rights and has determined that reverse engineering or purchasing the data is uneconomical. Delivery is specified as FOB Origin. While this is not a formal request for competitive quotes, interested parties may submit capability statements or quotations to demonstrate their ability to meet the requirement. All submissions must include a CAGE code. The government will consider these responses to determine if a competitive procurement is warranted. Technical documentation can be accessed via the DODSSP or ASSIST-Online. Award is contingent upon the offeror meeting qualification requirements per FAR 52.209-1.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

16--DRAWER ASSEMBLY,AIR, IN REPAIR/MODIFICATION OF

Solicitation # N0038326QMB44

The Department of Defense, through Navsup Weapon Systems Support, is initiating a sole-source procurement for one air drawer assembly, part number 123AV50578-303, under NSN 7R-1680-016616785-E7. This action is being conducted under the authority of FAR 6.302-1, with delivery terms set as FOB Origin. The requirement is specifically for the repair or modification of the assembly as detailed in TDP VER 001. Interested parties may submit proposals, quotations, or capability statements to demonstrate their ability to fulfill the requirement. While this notice is not a formal request for competitive proposals, the government will consider responses received within 45 days of publication, or 30 days if awarded under an existing Basic Ordering Agreement. The final decision to compete the procurement remains at the sole discretion of the government.

Navsup Weapon Systems Support

POSTED

DEADLINE

Fairfield Swage Service Contract for Watervliet Arsenal NY

Solicitation # W911PT-26-Q-A151

W6QK Acc Wva

POSTED

about 15 hours ago

DEADLINE

in 6 days

AI Contract Overview

This contract involves providing preventive maintenance services for the Colenta X-ray Film Processor, Model M43IC, to ensure its continuous operational readiness. The scope of work includes routine on-site inspection, cleaning, calibration, and performance verification of the equipment. The contract is a subcontract opportunity specifically set aside for small businesses under the SBA Total Small Business Set-Aside program, aligning with the NAICS code 811310, which pertains to commercial machinery maintenance. The solicitation was posted on May 20, 2026, with a response deadline of May 28, 2026. It is issued by the Fleet Readiness Center, a division of the Department of Defense. While details such as the exact location of performance and points of contact are unspecified, the contract underscores the critical nature of maintaining key diagnostic equipment to support the readiness and effectiveness of defense operations. Interested parties must comply with the outlined deadlines and meet small business criteria to participate.

General Info

Preventive maintenance for Colenta X-ray Film Processor, small business set-aside, DoD Fleet Readiness Center.

Agency

Department Of Defense → Fleet Readiness CenterView Agency

NAICS

811310 - Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and MaintenanceView NAICS

Place of Performance

Set-Aside

SBA

Documents

This scope was carved out of N6852026Q1025.

The full solicitation package (3 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

NEW SAP Colenta X-Ray PM and Repairs

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed

PostedMay 20

subcontract

Response DeadlineMay 28

Deadline has passed

Submission Closed

05/28/2026, 12:00:00 AM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → Fleet Readiness Center

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Fleet Readiness Center

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Routine on-site inspection, cleaning, calibration, and performance verification of the Colenta X-ray Film Processor (Model M43IC) to ensure operational readiness.