This Solicitation opportunity from Government of Canada was posted on April 15, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Primary Cathode & Anode, Omnipure System

Closed

W8482-264924/AInternational

Submission Closed04/15/2026, 02:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 336611

New

SLED

F&W, 2018 Munson Packman Boat Repower project

Solicitation # 2018 Munson Packman Boat Repower

The Confederated Tribes of the Colville Reservation Fish and Wildlife Department is soliciting proposals for a comprehensive propulsion repower and helm system integration for a 30 foot Munson Packman landing craft. The project requires a factory-certified Honda Marine Authorized Dealer to decommission and remove two existing Honda BF250A outboard engines and replace them with new Honda BF250D Drive-by-Wire outboards. The scope of work is divided into six phases, encompassing the removal of legacy rigging, a structural assessment of the transom, installation of new engines and Honda iST electronic control heads at dual helm stations, integration with the existing SeaStar PA1315-2 Power Assist steering and NMEA 2000 network, and a complete fuel system overhaul using USCG Type A1-15 lines. The project concludes with static diagnostics and a minimum two-hour sea trial to validate performance and safety protocols. The selected contractor must provide a secure facility for vessel storage and adhere to strict insurance requirements, including at least 1 million dollars in commercial general liability and business auto liability. Financial protections include a 25 percent retainage or a performance bond, with a bond being mandatory for contracts exceeding 100,000 dollars. Proposals are due by November 13, 2026, and will be evaluated based on a 100-point scale considering technical capability and budget, with specific preferences given to responsible Indian Offerors under TERO and tribal preference laws. All disputes are subject to the jurisdiction of the Colville Tribal Court, and payments are contingent upon the availability of tribal funds.

Confederated Tribes of the Colville Reservation

POSTED

DEADLINE

PANEL, VEHICULAR OPERAT

Solicitation # SPE7M4-27-T-1904

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

SWITCHBOARD, ALARM, SHIP

Solicitation # SPE4A6-27-T-7280

Solicitation SPE4A6-27-T-7280, issued by the DLA Weapons Support ASC Commodities Division, is for the procurement of one shipboard alarm switchboard, identified by NSN 6320011809908 and part number 004186-001 from Dynalec Corp. The contract is established as FOB Origin, with inspection and acceptance occurring at the destination. The required delivery date is October 9, 2026, with a delivery window of 20 days after the award. Shipping is directed to the Distribution Management Office at Camp Kinser and the freight shipping address at MCAS Futenma in Okinawa, Japan. The contractor must adhere to strict technical and quality standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Palletization must comply with DLA requirement RP001. A critical safety restriction prohibits the intentional addition of mercury or mercury-containing compounds in preservation, packaging, and marking per IP056. Payment and invoicing are to be processed electronically through the Wide Area Workflow system. The solicitation is eligible for automated award and includes a HUBZone price evaluation preference, though offers utilizing additive manufacturing are ineligible for award. Compliance with the Berry Amendment, Buy American Act, and DFARS cybersecurity and telecommunications restrictions is required.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Solicitation # SPE7M4-27-T-1931

Solicitation SPE7M4-27-T-1931, issued by the DLA Weapons Support Fluid Handling Division, is a request for quotations for five units of a 2-inch deck drain, also identified as an automatic BOA drain (NSN 2090015726651). The procurement is categorized under NAICS code 336611 and requires delivery to the USS Halsey DDG 97 at FPO AP 96667. The required delivery date is October 22, 2026, with a delivery timeframe of 20 days after receipt of order. Terms are FOB Destination, and both inspection and acceptance will occur at the destination. The contract mandates strict adherence to quality and packaging standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. Technical requirements are governed by the DLA Master List of Technical and Quality Requirements. Key restrictions include a prohibition on the intentional addition of mercury or mercury-containing compounds to the hardware. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and compliance with various FAR and DFARS clauses regarding the Buy American Act, cybersecurity safeguarding, and small business representations. Offerors must submit quotes through the DIBBS portal and are cautioned that failure to provide a Safety Data Sheet may result in being deemed ineligible for award.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Solicitation # SPE7M4-27-T-1892

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

WINDSHIELD WIPER ASSEM

Solicitation # SPE7M4-27-T-1887

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Solicitation # SPE4A6-27-T-4939

Solicitation SPE4A6-27-T-4939 is a total small business set-aside issued by the DLA Weapons Support ASC Commodities Division for the procurement of three rudder angle indicators, identified by NSN 6320007316134. The requirement is for a critical application item, specifically referencing Dynalec Corporation part number 4N7N. Delivery is required within 168 days after order, with a need ship date of April 13, 2027, and an original required delivery date of December 18, 2027. Shipping is designated as FOB Origin and will be delivered to DLA Distribution San Joaquin in Tracy, California. The contract mandates strict adherence to quality and technical standards, including CMMC Level 2 Self-Assessment and compliance with SAE AS9003 or ISO 9001. Inspection and acceptance will occur at the origin, utilizing zero-based sampling plans such as MIL-STD-1916 or ASQ H1331. Packaging and marking must comply with MIL-STD-129 and RP001, with a strict prohibition on the intentional use of mercury or mercury-containing compounds in the hardware, preservation, or packaging. Payment and receiving reports must be processed electronically through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Solicitation # SPE7MC-27-T-0664

Solicitation SPE7MC-27-T-0664 is a total small business set-aside issued by the DLA Distribution San Joaquin for the procurement of two ball valves, identified by NSN 4820015426625 and Hunt Valve Company part number D2355(ASSY2). This critical application item requires Item Unique Identification in accordance with MIL-STD-130 and DFARS 252.211-7003. The required delivery date is April 9, 2027, with a need ship date of April 6, 2027. Delivery is FOB Origin under the First Destination Transportation program, with the final destination being the DLA Distribution San Joaquin facility in Tracy, California. Inspection and acceptance will occur at the destination. The contract mandates strict adherence to DLA packaging and marking standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. All payment requests and receiving reports must be processed electronically through the Wide Area Workflow system. The procurement is subject to various federal regulations, including the Buy American Act, the Berry Amendment, and specific DFARS clauses regarding cybersecurity and the prohibition of certain telecommunications equipment. All quotes must be submitted via the DLA Internet Bid Board System, and the use of additive manufacturing processes for the supplied parts is prohibited unless specifically authorized.

POSTED

DEADLINE

Hull and Structural Steel RepairThis subcontract for Hull and Structural Steel Repair involves providing specialized steel fabrication and welding services for prime contractors supporting Puget Sound Naval Shipyard IMF projects. The scope of work includes the removal of chevron retaining hardware, the modification of rubber fender retention according to drawing SK10901, and the repair of rubber fender straps located at the bow and stern. All welding activities must strictly adhere to ANSI/AWS D1.1/D1.2 standards to ensure the structural integrity of the delivered hull components. Managed under the Department of Defense with a NAICS code of 336611, the project focuses on the delivery of modified and repaired hull structures. The solicitation was posted on October 27, 2026, with a response deadline set for November 3, 2026.

Puget Sound Naval Shipyard IMF

POSTED

DEADLINE

USNS SALVOR (T-ARS 52) VOYAGE REPAIR AVAILABILITY (VRA)

Solicitation # N6264927QL003

Solicitation N6264927QL003, issued by NAVSUP Fleet Logistics Center Yokosuka Site Singapore, seeks a contractor to perform a Voyage Repair Availability (VRA) for the USNS SALVOR (T-ARS 52). The project is located in Subic Bay, Philippines, with a period of performance from December 7, 2026, to December 20, 2026. The scope of work encompasses all management, engineering, procurement, and shipyard production resources necessary to execute alterations, repairs, and routine maintenance in accordance with Military Sealift Command specification SSU SN 27-021 and COMSC Instruction 4700.16 Series. This is a Firm-Fixed-Price contract and is not a small business set-aside. Award will be granted to the responsible offeror who is technically acceptable and provides the lowest evaluated price. Interested contractors must maintain an active registration in the System for Award Management (SAM) and submit a proposal including a signed SF 18, a price breakdown via Attachment J-2, and IRS Form W-14. Invoicing will be processed through Wide Area Work Flow (WAWF), and technical acceptance will be managed by the Port Engineer.

Navsup Flt Logistics Ctr Yokosuka

POSTED

DEADLINE

TSV4 NARR MESSING AND MODERNIZATION

Solicitation # N0018927QL008

NAVSUP FLT LOG CTR Norfolk is soliciting a firm-fixed-price contract for the development of a drawing package and Bill of Materials (BOM) to support habitability upgrades for the TSV4 Narragansett. The scope of work focuses on the vessel's messing, berthing, stateroom, and sanitary spaces at Joint Expeditionary Base Little Creek-Fort Story in Virginia Beach, Virginia. This effort is strictly limited to assessment and documentation; it specifically excludes any procurement, fabrication, removal, or installation of shipboard components. The project is a total set-aside for small businesses, including service-disabled veteran-owned small businesses, under NAICS code 336611. Key deliverables include a draft drawing package and BOM due 40 calendar days after award, with the final delivery of two electronic files and two full-size paper copies in NAVSEA format due within 61 calendar days. Contractors must adhere to several technical standards, including MIL-STD-2003 for electric plants, MIL-STD-777 for piping, and General Specifications for Overhaul of Surface Ships. A mandatory ship check at Colonna's Shipyard in Norfolk is required for eligibility, and failure to attend will result in disqualification. Award will be based on the best value, evaluating the mandatory ship check on a pass/fail basis and the technical approach on an acceptable/unacceptable basis, with the final selection going to the lowest total evaluated price.

Navsup Flt Logistics Ctr Norfolk

POSTED

DEADLINE

BIG BLUE 3 MAC - N64498-26-Q-5284

Solicitation # N6449826Q5284

The BIG BLUE 3 MAC solicitation, identified by number N6449826Q5284, is issued by the Department of Defense through the Naval Surface Warfare Center Philadelphia Division. This procurement falls under NAICS code 336611, indicating a focus on the manufacture of boat and marine vessel engines. The opportunity was posted on October 27, 2026, with a response deadline set for November 2, 2026. The contracting office is located in Philadelphia, Pennsylvania. Interested parties may coordinate with the primary point of contact, Anthony Ricciardi, for further inquiries. Detailed specifications and submission requirements can be accessed via the provided government portals.

Nswc Philadelphia Division

POSTED

about 23 hours ago

DEADLINE

in 5 days

AI Contract Overview

The Department of National Defence is seeking bids for the procurement of spare parts supporting the Halifax-class Black and Grey Water Sewage Treatment Plant Omnipure System. The contract involves supplying specific quantities of primary cathodes and anodes to be delivered to two locations: CFB Halifax and CFB Esquimalt. Specifically, 42 and 41 primary cathodes are required for Halifax and Esquimalt respectively, along with 30 primary anodes for Halifax and 29 for Esquimalt. All parts are identified by their respective part numbers and are sourced from Exceltec International Corporation. Bids must adhere to the solicitation’s mandatory technical requirements to be considered responsive. The contract will be awarded to the supplier whose bid meets these criteria and offers the lowest evaluated overall price. The Crown reserves the right to negotiate with suppliers during the procurement process. Submissions can be made in either official Canadian language, with the response deadline set for mid-April 2026. The solicitation is managed by the Department of National Defence, ensuring delivery to specified Canadian Forces Bases in British Columbia and Nova Scotia.

General Info

Procurement of specific Halifax-class sewage treatment spare parts, delivery to CFB Halifax and Esquimalt.

Agency

Government of Canada → Department of National Defence

NAICS

336611 - Ship Building and Repairing

Place of Performance

*Nova Scotia *British Columbia, CAN

Set-Aside

NONE

Documents

RFP W8482-264924/A Cathode et Anode Primaire, Système Omnipure

rfp

High

RFP W8482-264924/A Primary Cathode & Anode, Omnipure System

rfp

High

AI Contract Breakdown

Uniform Contract Format

Timeline

1 update

PhaseClosed

PostedMar 31

Solicitation

Notice updatedApr 15

Response deadline time changed from 7:00 PM UTC to 2:00 PM UTC on Apr 15, 2026. The notice description changed. The point of contact changed.

Response DeadlineApr 15

Deadline has passed

Submission Closed

04/15/2026, 02:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyGovernment of Canada → Department of National Defence

Contacts1 person available

OfficeN/A

Organization / AgencyGovernment of Canada → Department of National Defence

Office AddressN/A

Contacts

Anthony Lemoine-HoefsmitPoint of Contact

contact@example.gov

Full Description

NOTICE OF PROPOSED PROCUREMENT The Department of National Defence has a requirement for the items detailed below. The delivery is requested at CFB Halifax and CFB Esquimalt. This requirement is for spares in support of the Halifax-class Black and Grey Water Sewage Treatment Plant Omnipure System. A bid must comply with the requirements of the bid solicitation and meet all mandatory technical evaluation criteria to be declared responsive. The responsive bid with the lowest evaluated price on an aggregate basis will be recommended for award of a contract. Line Item: 001 PRIMARY CATHODE Part Number: 77051RM NCAGE: 62950, EXCELTEC INTL CORP GSIN: 4620 Quantity: 42 UoI: EA to be delivered to: CFB Halifax Line Item: 002 PRIMARY CATHODE Part Number: 77051RM NCAGE: 62950, EXCELTEC INTL CORP GSIN: 4620 Quantity: 41 UoI: EA to be delivered to: CFB Esquimalt Line Item: 003 PRIMARY ANODE Part Number: 77041RT NCAGE: 62950, EXCELTEC INTL CORP GSIN: 4610 Quantity: 30 UoI: EA to be delivered to: CFB Halifax Line Item: 004 PRIMARY ANODE Part Number: 77041RT NCAGE: 62950, EXCELTEC INTL CORP GSIN: 4610 Quantity: 29 UoI: EA to be delivered to: CFB Esquimalt The Crown retains the rights to negotiate with suppliers on any procurement. Documents may be submitted in either official language of Canada.

More opportunities from Government of Canada → Department of National Defence

Same awarding agency

Primary Cathode & Anode, Omnipure System

Contract Overview

Active Opportunities Like This One

AI Contract Overview

General Info

Documents

AI Contract Breakdown

Timeline

Find active opportunities like this

Organization & Contact Information

Full Description

More opportunities from Government of Canada → Department of National Defence

Earlier notices in this NAICS code

Get AI-powered intelligence on the opportunities still open