Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Project Management and Coordination

Active

Federal

Response Deadline07/31/2026, 01:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract entails comprehensive project management and coordination for the complete installation of an HVAC system, requiring full oversight of scheduling, adherence to safety protocols, and seamless coordination with subcontractors. All activities must align with USACE reporting standards, ensuring accurate documentation and compliance with federal directives. The work is scoped under a subcontract agreement classified under NAICS code 541611, indicating engineering and architectural services, and is being managed by the Department of Defense through its organization W4LD USA Hecsa. The solicitation was posted on July 24, 2026, with proposals due by July 31, 2026, at 1:00 PM, and performance is expected to take place at a location yet to be specified.

General Info

HVAC installation managed under USACE standards with subcontract coordination, due July 31, 2026.

Agency

Department Of Defense → W4LD USA HecsaView Agency

NAICS

541611 - Administrative Management and General Management Consulting ServicesView NAICS

Place of Performance

VA, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 24

subcontract

Response DeadlineJul 31

Submission deadline

Response Deadline

07/31/2026, 01:00:00 PM UTCin 7 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → W4LD USA Hecsa

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → W4LD USA Hecsa

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Oversight of the entire HVAC installation project, including scheduling, safety compliance, subcontractor coordination, and USACE reporting.

Similar Contracts

Same NAICS industry code

ITAR Compliance and Technical Data ManagementThe contract requires comprehensive management of ITAR-controlled technical data, ensuring strict adherence to U.S. export control regulations and seamless coordination with the Directorate of Defense Trade Controls and the Joint Certification Program. The contractor will be responsible for implementing and maintaining compliance protocols to safeguard sensitive defense-related information, handling all aspects of documentation, access controls, and reporting procedures mandated by ITAR. This includes establishing internal processes to monitor, classify, and transfer technical data while ensuring all personnel and partners follow export compliance standards and engage effectively with DDTC and JCP requirements. As a subcontract under the Department of Defense through the Defense Logistics Agency, the engagement demands a high level of operational precision and regulatory expertise, particularly in navigating the complex landscape of international defense trade controls. The work is governed by NAICS code 541611, indicating a focus on management consulting services related to administrative and general management. The response deadline is August 3, 2026, and performance may occur at any location as no specific place of performance is defined, allowing flexibility for remote or distributed operations as long as compliance obligations are fully met without compromise.

Defense Logistics Agency

POSTED

about 7 hours ago

DEADLINE

Export Control Compliance and Technical Data ManagementThe contract requires comprehensive management of export-controlled technical data, with strict adherence to ITAR and EAR regulations to ensure proper handling, access, and dissemination of sensitive specifications. A key requirement is obtaining and maintaining JCP certification, which governs authorized personnel access to controlled information and enforces compliance with U.S. export control laws. The subcontract is focused on technical data management for defense-related applications under the Department of Defense, specifically through LAND SUPPLIER OPERATIONS SMSG, and requires all activities to align with regulatory standards to prevent unauthorized disclosure or transfer of controlled information. The solicitation is open for responses until August 23, 2026, and is classified under NAICS code 541611 for Administrative Management and General Management Consulting Services, indicating that the scope involves procedural oversight and compliance management rather than direct manufacturing or production. The place of performance and point of contact details are not specified, suggesting flexibility in execution but emphasizing the need for contractors to establish secure, auditable processes for data control regardless of location. All parties must implement rigorous internal controls, documentation protocols, and training programs to maintain regulatory compliance throughout the contract term.

LAND SUPPLIER OPERATIONS SMSG

POSTED

about 7 hours ago

DEADLINE

Export-Controlled Technical Data Management and ComplianceThe contract pertains to the management of ITAR and EAR compliance for technical data at the Department of Defense’s New Cumberland facility, requiring the implementation of robust controls to ensure adherence to U.S. export regulations. Key responsibilities include developing and delivering training programs on export control requirements, establishing and maintaining access controls to restrict unauthorized handling of controlled technical data, and ensuring thorough documentation of all compliance-related activities. The contractor must also complete the Defense Logistics Agency’s export-controlled data questionnaire accurately and in a timely manner to support regulatory accountability and audit readiness. This subcontract, classified under NAICS code 541611, is focused on specialized administrative and support services related to export compliance and is positioned for performance at the New Cumberland location with ZIP code 17070-5002. Proposals must be submitted by August 3, 2026, and the work is expected to support defense-related technical operations under strict regulatory oversight. The absence of a set-aside designation indicates the opportunity is open to all eligible businesses, with emphasis on technical expertise in international traffic in arms and export administration regulations.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 7 hours ago

DEADLINE

Supply Chain Compliance and Documentation ServicesThis contract requires comprehensive supply chain compliance services to ensure adherence to critical defense regulations including DFARS, FAR, counterfeit parts prevention, and cybersecurity standards for defense contractors. The work involves managing documentation and operational controls to meet stringent federal requirements throughout the entire procurement and production lifecycle, with a focus on identifying, mitigating, and reporting risks related to illicit or non-compliant components. All activities must be performed in alignment with current defense contracting protocols and must be delivered by a small business as this is a total small business set-aside under SBA guidelines, with the NAICS code 541611 indicating management, scientific, and technical consulting services. The solicitation was posted on July 24, 2026, and responses are due by August 7, 2026, under the auspices of the ASC Commodities Division within the Department of Defense. The place of performance and specific location details are not provided, indicating the work may be performed remotely or at multiple secured sites as needed by the contractor. The contract type is a subcontract, meaning the successful bidder will be supporting a prime contractor or larger entity operating under the broader defense acquisition structure. Compliance with cybersecurity requirements is integral, and all documentation must be accurate, traceable, and auditable to meet federal oversight expectations without reliance on external file sources or proprietary systems beyond those established by governing defense regulations.

ASC COMMODITIES DIVISION

POSTED

about 7 hours ago

DEADLINE

Small Business Subcontracting and Socioeconomic Compliance ManagementThe contract seeks advisory and coordination services focused on ensuring full compliance with small business participation mandates across Department of Defense projects, particularly through the management of disadvantaged, minority, and women-owned business enterprise subcontracting activities. Key responsibilities include accurate tracking of DBE, MBE, and WBE subcontractor engagements, maintaining up-to-date System for Award Management representations, and preparing detailed adjectival ratings required for federal reporting and evaluation purposes. The services are critical to meeting federal obligations around economic inclusion and equitable contracting practices, requiring deep familiarity with federal compliance frameworks and subcontractor monitoring protocols. The solicitation, issued under NAICS code 541611 for management consulting services, is open to qualified vendors with a response deadline of August 24, 2026. It is categorized as a subcontract under Land Supplier Operations SMSG, with performance tied to the broader operations of the Department of Defense. While no specific location or point of contact is listed, interested parties can access all official details through the DIBBS portal using the provided link. The contract does not specify a set-aside type, indicating it is open to all eligible respondents regardless of business size or socioeconomic status, though successful proposals must demonstrate proven experience in socioeconomic compliance and subcontracting oversight within federal contracting environments.

LAND SUPPLIER OPERATIONS SMSG

POSTED

about 7 hours ago

DEADLINE

in about 1 month

Cybersecurity and Compliance SupportThe contract seeks a subcontractor to provide cybersecurity and compliance support for a grant management system, ensuring alignment with both state and federal cybersecurity standards. The work will involve conducting regular risk assessments, performing vulnerability scans, and maintaining audit readiness to safeguard sensitive data and operational integrity. The system must be continuously monitored and updated to meet evolving regulatory requirements, with a strong focus on proactive threat detection and documentation for potential audits. Performance is expected to be carried out in Boston, Massachusetts, with the requirement that all security practices adhere to the highest industry and governmental benchmarks. The subcontract is posted under NAICS code 541611, indicating it falls within the category of management consulting services, and is open for response until August 22, 2026. The contracting agency is the Massachusetts Economic Development office under EED01. There is no set-aside designation specified, allowing any qualified entity to bid. The contract emphasizes operational reliability and compliance over technical infrastructure development, requiring the vendor to demonstrate proven experience in securing grant-related systems and maintaining continuous compliance in highly regulated public sector environments. The successful contractor will be responsible for delivering documented evidence of completed assessments, scan results, and remediation actions to support transparent and auditable security practices throughout the lifecycle of the grant system.

EED01 - Economic Development

POSTED

about 8 hours ago

DEADLINE

Electronic Monitoring ServicesThe contract seeks a subcontractor to provide electronic monitoring services for youth involved in the juvenile justice system, specifically focusing on GPS tracking and alcohol monitoring through wearable devices. The scope includes end-to-end management of the monitoring equipment, real-time data collection and reporting to appropriate authorities, and round-the-clock technical support to ensure uninterrupted service. The vendor must guarantee device reliability, timely alerts for violations or malfunctions, and secure, compliant handling of all sensitive data related to youth supervision. The contract is listed as a subcontract under NAICS code 541611 and is issued by Hagerstown Community College in Maryland, with a response deadline of August 21, 2026. Although the place of performance and office address details are not specified, the service is intended for use within Maryland’s juvenile justice framework. The subcontractor is expected to deliver scalable, dependable monitoring solutions with no downtime, supporting court-ordered supervision requirements while aligning with state and federal standards for youth rehabiliataion and accountability.

Hagerstown Community College

POSTED

about 9 hours ago

DEADLINE

IT Project Management and OversightThe contract titled IT Project Management and Oversight seeks to secure project management services focused on ensuring the timely delivery of IT initiatives, strict adherence to project scope, and seamless coordination among subcontractors supporting the Massachusetts Department of Elementary and Secondary Education. The work will be performed at Santilli Highway in Everett, Massachusetts, with a bid deadline of September 1, 2026, and is classified under NAICS code 541611 for management consulting services. This is a subcontract opportunity, meaning the winning vendor will operate under a primary contractor, and the scope requires robust oversight to maintain compliance, manage timelines, and facilitate communication across multiple technical teams and external partners. The contract does not specify a set-aside designation, and while no point of contact is listed, bidders must submit responses through the provided CommBuys portal by the stated deadline.

DOE02148 - Department of Elementary and Secondary Education

POSTED

about 9 hours ago

DEADLINE

in about 1 month

Data Security and Cybersecurity ComplianceThe contract titled Data Security and Cybersecurity Compliance requires the implementation and ongoing maintenance of robust cybersecurity controls to safeguard sensitive information, with specific emphasis on encryption protocols, incident response procedures, and full adherence to Commonwealth security policies. The work involves ensuring all systems and data handling practices meet mandated standards for protection against unauthorized access, data breaches, and other cybersecurity threats, with continuous monitoring and updates to maintain compliance. The subcontract is tied to the NAICS code 541611, indicating it falls under management consulting services with a focus on administrative and IT security operations. The solicitation is associated with the Massachusetts Department of Elementary and Secondary Education and is set for performance at Santilli Highway in Everett, with a response deadline of September 1, 2026. Although no point of contact or set-aside details are provided, the contract is explicitly structured as a subcontract and is publicly accessible through a state procurement portal. All work must align with the security expectations of the Commonwealth, requiring detailed documentation, audit readiness, and timely mitigation of any detected vulnerabilities or breaches.

DOE02148 - Department of Elementary and Secondary Education

POSTED

about 9 hours ago

DEADLINE

in about 1 month

Information Security & Compliance ManagementThe contract titled Information Security & Compliance Management requires the implementation and ongoing maintenance of robust security controls to safeguard Tarrant County’s data assets. Key responsibilities include deploying encryption for data at rest and in transit, establishing comprehensive audit logging to track access and changes, managing an effective incident response program to detect and mitigate security events, and producing regular compliance reports to demonstrate adherence to the county’s data protection standards. These measures are designed to ensure alignment with applicable regulatory expectations and internal governance frameworks. This subcontract is posted with a response deadline of August 24, 2026, and is categorized under NAICS code 541611, which pertains to administrative management and general management consulting services. The contracting entity is Tarrant County in Texas, with no specific location or point of contact provided beyond the agency name. The contract does not specify a set-aside type or additional demographic requirements, and performance is expected to support the county’s broader security and compliance objectives without territorial restrictions outlined. Interested parties must submit proposals via the provided online portal before the deadline.

POSTED

about 11 hours ago

DEADLINE

in about 1 month

Indemnification and Third-Party Liability ManagementTarrant County is seeking a subcontractor to provide legal and financial protection against third-party claims that arise from the actions of vendors or subcontractors engaged in county-related activities. The contract requires the selected party to defend and indemnify the county for any liabilities, damages, or legal costs resulting from third-party assertions linked to the subcontractor’s operations or those of their vendors. This obligation ensures the county is shielded from financial exposure due to external parties’ negligence, misconduct, or failure to comply with applicable laws or standards. The solicitation is open for responses until August 10, 2026, and falls under the NAICS code 541611, indicating a focus on management consulting services that involve legal risk mitigation. The contract is structured as a subcontract and is not subject to a specific set-aside classification, meaning it is open to eligible contractors regardless of business size or demographic classification. All performance activities are expected to align with the county’s operational framework, though a specific geographic location for performance is not detailed in the posting.

POSTED

about 11 hours ago

DEADLINE

IT Audit and Compliance SupportThe contract titled IT Audit and Compliance Support requires the provider to assist government entities in preparing for and supporting audits, ensuring full adherence to state and federal regulations. Key responsibilities include maintaining and providing accurate records as needed during audits, particularly in anticipation of annual HUB Office reviews, which focus on small, minority, women-owned, and other historically underutilized business participation. The work is directly tied to compliance obligations and demands a thorough understanding of auditing protocols and documentation standards across multiple regulatory frameworks. This is a subcontract solicitation issued by Tarrant County in Texas with a NAICS code of 541611, indicating it relates to management consulting services, specifically those supporting administrative and compliance functions. The solicitation was posted on July 24, 2026, with a response deadline of August 10, 2026, and no set-aside designation or specific organizational type requirements are specified. All performance is expected to occur within Texas, and the contract is accessible online through Tarrant County’s public procurement portal.

POSTED

about 11 hours ago

DEADLINE

More opportunities from Department Of Defense → W4LD USA Hecsa

Same awarding agency

Site Access and Escort CoordinationThe contract titled Site Access and Escort Coordination is a subcontract under the Department of Defense, managed by W4LD USA Hecsa, focusing on the end-to-end management of Notice of Visit submissions, escort scheduling, and strict adherence to physical and logical access controls for restricted laboratory environments. The contractor will be responsible for ensuring all visitor access is properly documented, approved, and escorted in compliance with federal security protocols, coordinating logistics to facilitate seamless and secure entry into sensitive areas while maintaining complete audit readiness. This role requires rigorous operational discipline and integration with existing security infrastructures to prevent unauthorized access or breaches. The solicitation was posted on July 24, 2026, with a response deadline of July 31, 2026, and is classified under NAICS code 561612, indicating services related to security systems and surveillance. While specific geographic performance locations are not detailed, the work is expected to support Department of Defense operations requiring high-level access control, likely at defense-related facilities or research installations. The contract demands a thorough understanding of compliance frameworks governing federal secure facilities, with an emphasis on procedural accuracy, real-time coordination, and accountability in all visitor management activities. No set-aside provisions are indicated, suggesting open competition among qualified subcontractors.

Security Guards and Patrol Services

POSTED

about 12 hours ago

DEADLINE

Security and Personnel Vetting ComplianceThe contract entails the pre-screening and submission of personnel for mandatory federal vetting processes including NACI, E-Verify, FBI fingerprinting, and NCIC-III/TSDB checks, ensuring full compliance with applicable U.S. government directives. All submissions must adhere to established protocols for conducting background investigations and verifying employment eligibility, with responsibility resting on the subcontractor to manage the accuracy, timeliness, and completeness of all data provided to federal systems. The work is performed under the oversight of the Department of Defense through W4LD USA Hecsa, with specific focus on upholding national security and personnel integrity standards across all submitted cases. This subcontract, classified under NAICS code 541612, has a submission deadline of July 31, 2026, and was posted on July 24, 2026, indicating a short response window for qualified vendors. While no set-aside classification or location details are specified, performance is expected to support federal requirements regardless of physical location, and the contractor must be capable of handling sensitive information in alignment with defense and intelligence community standards. All participants must be processed through standardized federal databases without delay, and failure to meet compliance thresholds could result in disqualification or termination of subcontractor status.

Human Resources Consulting Services

POSTED

about 12 hours ago

DEADLINE

Electrical Integration and Power HookupThe contract pertains to the electrical integration and power hookup required for a new HVAC system, encompassing electrical wiring, circuit provisioning, disconnect installation, and seamless integration with the building’s existing power and control infrastructure. The work demands precise coordination to ensure compatibility, safety, and compliance with electrical standards while minimizing disruption to ongoing operations. All tasks must be executed in alignment with the technical specifications of the building’s current systems and the requirements of the new HVAC equipment. Subcontracted under the Department of Defense, the work is classified under NAICS code 238210 for electrical contracting and is posted by W4LD USA Hecsa with a response deadline of July 31, 2026. The scope requires qualified contractors with proven expertise in industrial or institutional building electrical systems, particularly those familiar with defense facility protocols. The place of performance and point of contact details are unspecified, suggesting the location and coordination may be determined post-award, and bidders must be prepared to address site-specific conditions upon selection.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

about 12 hours ago

DEADLINE

HVAC System Installation – Split A/C with Hot Gas ReheatA full installation of a split air conditioning system equipped with hot gas reheat is required for a precision optics laboratory where strict temperature and humidity controls are critical to operational integrity. The scope encompasses complete mechanical, electrical, and controls integration to ensure seamless operation within the sensitive environment. The system must deliver precise environmental stability to safeguard optical components and maintain measurement accuracy. The contract is structured as a subcontract under NAICS code 238220 and is issued by the Department of Defense through W4LD USA Hecsa. All work must be completed in compliance with technical specifications and performance standards defined for the facility. Proposals are due by July 31, 2026, with the opportunity posted on July 24, 2026, for qualified subcontractors to respond.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

about 12 hours ago

DEADLINE

INTAC OR/UR Training Vehicle Fleet Safety Roll BarsThe U.S. Army Corps of Engineers Mission Support Battalion is conducting a sources sought market survey under solicitation number W912HQ26S0047 to gather information for preliminary planning on a potential contract to design, fabricate, and install interior safety motor vehicle roll cages in 13 INTAC off-road/unimproved road training vehicles. This announcement is not a request for quotes or a commitment to award a contract; it is solely for market research to assess industry capability and inform future procurement decisions. Vendors with NAICS code 811114, Specialized Automotive Repair, are encouraged to submit capability packages that include their organization name, location, CAGE code, socioeconomic status, demonstrated ability to perform work of this scope and complexity, and comments on the draft scope of work. While the anticipated contract type is Firm Fixed Price and the value is expected to be below the simplified acquisition threshold, no pricing data is being requested at this stage. All responses must be submitted via email to both Contract Specialist Alexander Arnoe and Contracting Officer Giorgiana Chen no later than 3:00 PM EST on Thursday, July 31, 2026, with questions due by July 27, 2026. The Government will not reimburse costs associated with responding, will not notify respondents of results, and reserves the right to ignore all submissions without explanation. The solicitation indicates that any future contract award will involve strict compliance with federal and defense acquisition regulations, including FAR and DFARS clauses covering small business representation, labor standards, cybersecurity (including DFARS 252.204-7012 for safeguarding information), contractor personnel identity verification, and anti-kickback provisions. Performance is expected to occur at the USACE Mission Support Battalion location in Alexandria, Virginia, with required safety protocols including OSHA certification for site personnel and adherence to EM 385-1-1 safety standards. Any future contract would require an approved Quality Control Plan, an Accident Prevention Plan, a qualified Contractor Safety Officer, and compliance with E-Verify, NCIC-III vetting, and Notice of Visit procedures for site access. Offerors must be registered in SAM.gov and maintain a valid CAGE code and Unique Entity ID. Although no formal evaluation weights are specified, future proposals would be assessed on Technical Capability, Past Performance, and Price, with award expected to be made without discussions to the most advantageous offer based on the totality of evaluations. Participation in this

Specialized Automotive Repair

POSTED

about 12 hours ago

DEADLINE

Independent External Peer Reviews for the US Army Corps of EngineersThe U.S. Army Corps of Engineers, through the Mission Support Battalion on behalf of the Institute for Water Resources, is soliciting proposals to establish one or more Blanket Purchase Agreements (BPA) for Independent External Peer Review (IEPR) services in support of water resource projects and scientific assessments. These reviews are mandated by the Office of Management and Budget’s Bulletin M-05-03 and the Water Resources Development Act of 2007, as amended, which require independent expert evaluation of certain USACE studies and products. Only eligible 501(c)(3) nonprofit organizations may serve as prime contractors. The BPA will have a five-year ordering period with no options, and the total cumulative ceiling for all awardees combined is $7,000,000, with individual order limits set at $350,000 for single items and $7,000,000 for combined items. Contractors will be required to establish expert panels in accordance with National Academy of Sciences guidelines and manage the full lifecycle of peer reviews across key technical domains including planning, biology, economics, environment, hydrology, and engineering. Each order will have a customized Performance Work Statement detailing specific deliverables, schedules, and requirements, and all work must be performed at the contractor’s facility unless travel is explicitly required and detailed in the order. All proposals must be submitted electronically by July 31, 2026, via email to the designated points of contact, using specified formats including PDF for documents, and Microsoft Excel for pricing breakdowns, with strict adherence to formatting rules such as 11-point serif font, one-inch margins, and prohibition of hyperlinks or self-extracting files. Proposals are evaluated against six factors: management approach, technical approach, response to an example order, past performance, compliance with requirements, and price, with the non-price factors collectively deemed significantly more important than price. Offerors must demonstrate proven capability in managing IEPRs, including recruitment of qualified experts, delivery of high-quality documentation free of errors, and adherence to a Government-approved Quality Control Plan and Quality Assurance Surveillance Plan. Compliance with cybersecurity regulations including NIST SP 800-171 and CMMC requirements is mandatory, and all personnel requiring access to government installations must complete AT Level I training and undergo background checks. Contract administration is governed by strict protocols: only the Contracting Officer may authorize modifications; invoices must be submitted electronically with precise details including employee names, CL

All Other Professional, Scientific, and Technical Services

POSTED

DEADLINE

Brake Pads for Suburban and TahoeThe contract solicitation W912HQ26QA015, issued by the U.S. Department of Defense through the Office of W4LD USA Hecsa in Alexandria, Virginia, is a Total Small Business Set-Aside under FAR 19.5 for the procurement of custom brake pads for military training vehicles used at the Summit Point Training Facility in West Virginia. The requirement covers five distinct brake pad assemblies: front pads for Suburban and multiple model years of Tahoe and Yukon, as well as rear pads for Tahoe and Yukon, each identified by specific OEM part numbers including GPX290-R8, GP1910-R8, GP2407-R8, and GP2174-R8. The solicitation is restricted to small businesses under NAICS code 336340, with a response deadline of July 27, 2026, and delivery expected within 45 days of award, FOB Destination at the Summit Point facility. No pricing data is provided in the public documents, and while the total contract value is unlisted, the quantities indicate a significant procurement totaling at least 90 sets of brake components. The Government is responsible for acceptance at the delivery site, and compliance is implied through adherence to exact part numbers and the need for safe vehicle operation in training environments. No formal contract clauses, evaluation factors, or special requirements are explicitly detailed in the available documentation, though references to attachments suggest additional technical, packaging, or submission details may exist. The absence of Section K means no offeror representations for small business status, socioeconomic certifications, or UEI/CAGE codes are visible, and no inspection criteria, packaging standards, or invoicing protocols are stated. The contracting office, part of the U.S. Army Corps of Engineers, is the point of contact for questions, with Doug Pohlman and Gregory Booker listed as primary and secondary points. While the acquisition appears straightforward—centered on commercial automotive parts for military use—its classification as a small business set-aside and the lack of pricing or detailed administrative guidance indicate that successful bidders must comply with both procurement and socioeconomic rules without clear technical specifications beyond part numbers, relying on full attachments for complete instructions.

Motor Vehicle Brake System Manufacturing

POSTED

DEADLINE

Custom Rear Brake Pads for Chevrolet SuburbanThe contract calls for the supply of custom rear brake pads specifically designed for the Chevrolet Suburban, meeting original equipment manufacturer specifications, with model years inferred from fleet usage context. All products must comply strictly with OEM standards to ensure safety, performance, and compatibility across the designated vehicle fleet. The solicitation is classified as a subcontract under a Total Small Business Set-Aside, restricted exclusively to small businesses as defined by the Small Business Administration, with the North American Industry Classification System code 336340 indicating automotive brake system manufacturing. The opportunity was posted on July 20, 2026, and responses are due by July 27, 2026, at 6:00 PM. Performance of the contract is centered at Summit Point, West Virginia, with a ZIP code of 25446. The awarding agency is the Department of Defense, under the office of W4LD USA Hecsa, reflecting a military or defense-related procurement intent.

Motor Vehicle Brake System Manufacturing

POSTED

DEADLINE

Custom Rear Brake Pads for Chevrolet Tahoe/Yukon (2015–2020 Models)The contract calls for the supply of twenty sets of custom rear brake pads designed specifically for 2015 to 2020 Chevrolet Tahoe and GMC Yukon vehicles, with all units required to fully align with original equipment manufacturer specifications to ensure consistent and reliable performance in training environments. The solicitation is structured as a subcontract under a Total Small Business Set-Aside classification, limiting eligibility to small businesses as defined by the Small Business Administration, and falls under the NAICS code 336340 for automotive brake system manufacturing. The opportunity was posted on July 20, 2026, with a firm deadline for responses set for July 27, 2026, at 6:00 p.m. Eastern Time. Performance of the contract is to be carried out at Summit Point, West Virginia, with the awarding agency listed as W4LD USA Hecsa under the Department of Defense.

Motor Vehicle Brake System Manufacturing

POSTED

DEADLINE

Custom Front Brake Pads for 2022+ Chevrolet Tahoe (GP2407-R8)The contract calls for the manufacture and delivery of 10 sets of front brake pads specifically designed for 2022 and newer Chevrolet Tahoe models, with strict adherence to the OEM part number GP2407-R8 and alignment with updated vehicle specifications. All components must meet defined performance and quality standards to ensure compatibility and safety in the intended application. The solicitation is designated as a subcontract under a Total Small Business Set-Aside, as defined by the SBA and FAR 19.5, restricting eligibility exclusively to small businesses. The North American Industry Classification System code 336340 identifies the work as falling under automotive brake system manufacturing. Performance of the contract is required to be carried out at Summit Point, West Virginia, with a zip code of 25446. The posting date is July 20, 2026, and responses are due by July 27, 2026, at 6:00 PM Eastern Time. The contracting entity is W4LD USA Hecsa under the Department of Defense, though no point of contact or detailed address information is provided beyond the place of performance.

Motor Vehicle Brake System Manufacturing

POSTED

DEADLINE

Custom Front Brake Pads for 2014–2021 Chevrolet Tahoe (GP1910-R8)Ten sets of custom front brake pads for 2014–2021 Chevrolet Tahoe vehicles are being procured under a small business set-aside contract, with the parts conforming to OEM part number GP1910-R8 and designed specifically for military training vehicle operations. The contract is classified as a subcontract under NAICS code 336340, indicating the automotive component manufacturing sector, and is exclusively reserved for small businesses as defined by the Small Business Administration. The opportunity was posted on July 20, 2026, with a firm response deadline of July 27, 2026, at 6:00 p.m. EST. Performance of the contract will be executed at Summit Point, West Virginia, with the awarding agency identified as W4LD USA Hecsa under the Department of Defense. The procurement reflects standardized military operational requirements for durable, high-performance brake components in demanding training environments.

Motor Vehicle Brake System Manufacturing

POSTED

DEADLINE

Custom Front Brake Pads for Chevrolet Suburban (GPX290-R8)The contract requires the manufacture and delivery of 50 sets of custom front brake pads designed specifically for the Chevrolet Suburban, adhering strictly to OEM specifications identified as GPX290-R8 to ensure proper fitment and performance standards. All components must meet the exact engineering and safety requirements expected of original equipment manufacturer parts, with no deviations permitted in material composition, design, or testing protocols. The work is set under a total small business set-aside as defined by the SBA, meaning only qualified small businesses are eligible to compete for this opportunity, and the NAICS code 336340 categorizes it under automotive brake system manufacturing. The solicitation was posted on July 20, 2026, with responses required by July 27, 2026, at 6:00 PM Eastern Time, and the performance location is designated as Summit Point, West Virginia, with ZIP code 25446. The contract is classified as a subcontract and is issued under the Department of Defense through its agency W4LD USA Hecsa. While no specific point of contact is listed, interested parties must submit proposals through the official SAM.gov portal to be considered. All deliverables must be completed and shipped to meet the specified delivery requirements at the place of performance, ensuring full compliance with defense procurement standards.

Motor Vehicle Brake System Manufacturing

POSTED

DEADLINE