Purchase/Installation of 25HP AC Drive

This is a COMBINED SYNOPSIS/SOLICITATION for commercial items prepared in accordance with the information in FAR Subpart 12.6, using Simplified Acquisition Procedures, as supplemented with the additional information included in this notice. This announcement constitutes the only solicitation; a written solicitation will not be issued. PAPER COPIES OF THIS SOLICITATION WILL NOT BE AVAILABLE. This combined synopsis/solicitation SHALL be posted on FEDBIZOPPS. The RFQ number is N39040-16-T-0138. This solicitation documents and incorporates provisions and clauses in effect through FAC 2005-86 and DFARS Change Notice 2015-1230. It is the responsibility of the contractor to be familiar with the applicable clauses and provisions. The clauses may be accessed in full text at these addresses: https://www.acquisition.gov/?q=browsefar and http://www.acq.osd.mil/dpap/dars/change_notices.html. The NAICS code is 811310 and this is a full and open competition solicitation. The Portsmouth Naval Shipyard requests responses from qualified sources capable of providing the following (in accordance with the attached request for quote sheet): ITEM DESCRIPTION QTY 0001 Purchase/Installation of 25HP AC Drive to be used on the 1 Job feed section of a SECO drive, Model -SV3425-10100 vertical milling machine in accordance with Statement of Work listed in Section C. Period Of Performance is 14 March through 31 March 2016. In accordance with attached Statement of Work. Additional information mentioned in paragraph 2.0 will be provided via email at individual request of each Vendor. Responsibility and Inspection: unless otherwise specified in the order, the supplier is responsible for the performance of all inspection requirements and quality control. The following FAR provision and clauses are applicable to this procurement: 52.203-3 Gratuities 52.203-6 Restrictions on Subcontractor Sales to the Government 52.203-11 Certification and Disclosure Regarding Payments to Influence Certain Federal Transactions 52.203-12 Limitation on Payments to Influence Certain Federal Transactions 52.203-17 Contractor Employee Whistleblower Rights and Requirement to Inform Employees of Whistleblower Rights 52.204-4 Printed or Copied Double-Sided on Postconsumer Fiber Content Paper 52.204-7 System for Award Management 52.204-8 Annual Representations and Certifications 52.204-10 Reporting Executive Compensation and First-Tier Subcontract Awards (Feb 2012) 52.204-13 System for Award Management Maintenance 52.204-16 Commercial and Government Entity Code Reporting 52.204-17 Ownership or Control of Offeror 52.204-18 Commercial and Government Entity Code Maintenance 52.204-19 Incorporation by Reference of Representations and Certifications 52.209-2 Prohibition on Contracting with Inverted Domestic Corporations--Representation 52.209-6 Protecting the Government's Interest When Subcontracting 52.209-7 Information Regarding Responsibility Matters 52.209-10 Prohibition on Contracting With Inverted Domestic Corporations 52.212-1, Instructions to Offerors - Commercial Items; 52.212-2, Evaluation - Commercial Item (Jan 1999) 52.212-3 and its ALT I, Offeror Representations and Certifications - Commercial Items; 52.212-4, Contract Terms and Conditions - Commercial Items 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders 52.216-1 Type of Contract: Firm Fixed Price 52.217-9 Option to Extend the Term of the Contract, 15 days with 30 day notification 52.219-1 Small Business Program Representation 52.219-6, Notice of Total Small Business Set-Aside 52.219-8 Utilization of Small Business Concerns 52.219-28, Post Award Small Business Representation 52.222-3 Convict Labor 52.222-19 Child Labor-Cooperation With Authorities and Remedies 52.222-21, Prohibition of Segregated Facilities 52.222-26, Equal Opportunity 52.222-35, Equal Opportunity for Veterans 52.222-36, Equal Opportunity for Workers with Disabilities 52.222-37, Employment Reports on Veterans 52.222-40 Notification of Employee Rights Under the National Labor Relations Act 52.222-50, Combating Trafficking in Persons 52.223-3, Hazardous Material Identification & Material Safety Data 52.223-11 Ozone-Depleting Substances 52.223-18, Contractor Policy to Ban Text Messaging while Driving 52.225-13, Restriction on Foreign Purchases 52.225-25 Prohibition on Contracting 52.232-33, Payment by Electronic Funds Transfer - System for Award Management 52.232-36, Payment by Third Party 52.232-39 Unenforceability of Unauthorized Obligations 52.232-40 Providing Accelerated Payments to Small Business Subcontractors 52.233-3 Protest After Award (Aug 1996) 52.233-4 Applicable Law for Breach of Contract Claim (Oct 2004) 52.242-15 Stop-Work Order 52.244-6 Subcontracts for Commercial Items. 52.242-17 Government Delay Of Work 52.247-34 F.o.b. Destination 52.252-2 Clauses Incorporated by Reference 52.252-6 Authorized Deviations in Clauses 52.253-1 Computer Generated Forms Quoters shall include a completed copy of 52.212-3 and its ALT I, and 52.219-1 with quotes. All clauses shall be incorporated by reference in the order. Additional contract terms and conditions applicable to this procurement are: DFARS 252.201-7000 Contracting Officer's Representative DFARS 252.203-7000, Requirements Relating to Compensation of Former DoD Officials DFARS 252.203-7002 Requirement to Inform Employees of Whistleblower Rights DFARS 252.203-7003 Agency Office of the Inspector General DFARS 252.203-7005, Representation Relating to Compensation of Former DOD officials DFARS 252.204-7003, Control of Government Personnel Work Product (April 1992) DFARS 252.204-7004 Alt A, System for Award Management DFARS 252.204-7008 (Dev) Compliance with Safeguarding Covered Defense Information Controls DFARS 252.204-7009 Limitations on the Use or Disclosure of Third-Party Contractor Reported Cyber I Incident Information (Dec 2015) DFARS 252.204-7011 Alternative Line Item Structure DFARS 252.204-7012 (Dev) Safeguarding Covered Defense Information and Cyber Incident Reporting DFARS 252.204-7015 Disclosure of Information to Litigation Support Contractors DFARS 252.209-7004 Subcontracting with Firms that are Owned or Controlled DFARS 252.223-7008, Prohibition of Hexavalent Chromium (May 2011) DFARS 252.225-7048 Export-Controlled Items DFARS 252.232-7003, Electronic Submission of Payment Requests DFARS 252.232-7006, Wide Area Workflow Payment Instructions DFARS 252.232-7010, Levies on Contract Payments DFARS 252.237-7010, Prohibition on Interrogation of Detainees by Contractor Personnel (Nov 2010) DFARS 252.243-7001 Pricing of Contract Modifications DFARS 252.243-7002 Requests for Equitable Adjustment DFARS 252.244-7000 Subcontracts for Commercial Items DFARS 252.247-7024 Notification of Transportation of Supplies by Sea This announcement will close at 10:00 AM EST local time on 10 March 2016. Contact Aimee Maciejewski who can be reached by email at contact@example.gov. Instructions to Offerors: Addendum To 52.212-1 "Instructions To Offerors - Commercial Items" I. GENERAL In addition to FAR 52.212-1, "Instructions to Offerors - Commercial Items" and any other instructions contained elsewhere in this solicitation, the following information is provided: Objections to any of the terms and conditions of the RFQ will constitute a deficiency which will make the offer unacceptable. IMPORTANT NOTES: (1) Vendors shall respond to all requirements of the solicitation document. Vendors are cautioned not to alter the combined synopsis solicitation. (2) Initial quotes and any modifications thereto are to be submitted to the Contracting Office on or before the closing dated time cited elsewhere in this Request for Quote. (3) Responses should be submitted via email only (4) Please review all specifications carefully, and make note of all lifting and handling requirements, and all base access requirements. II. CONTENT OF QUOTE RFQ pricing and information pages completed by the vendor. Acknowledgement of solicitation amendments (if not previously acknowledged). Technical Submission to include: ? Submission of technical information demonstrating compliance with the specifications, including, but not limited to: Brochures pertaining to the pieces of equipment being quoted, to include, but not limited to: pictures or the equipment, and technical specifications of the equipment demonstrating compliance with the PWS and specifications. These should be readily identified by the item ID number. The details of any/all exceptions taken to the specification. The completion and submission of the above items will constitute a quote and will be considered the vendor's unconditional assent to the terms and conditions of this solicitation and any attachments and/or exhibits hereto. An objection to any of the terms and conditions of the solicitation will constitute a deficiency which will make the offer unacceptable. Evaluation Criteria: 52.212-2 Evaluation--Commercial Items (Oct 2014) The quotation shall consist of two (2) parts: (1) Technical Acceptability, and (2) Price Information. Award will be made to the lowest priced, technically acceptable offeror. Vendors will be required to submit a quote that will be evaluated in accordance with the specifications and provisions of the solicitation. Vendors are reminded to submit technical description as specified in FAR 52.212-1(b)(4). Quotations will be evaluated as follows: - 1. Technical Acceptability - 2. Price (1) TECHNICAL ACCEPTABILITY Quotations submitted by each vendor will be evaluated in accordance with the specifications provided in the solicitation, FAR 52.212-1 Instruction to Offerors, and Addendum to FAR 52.212-1 and determined to be either acceptable or unacceptable. Failure to include pricing for all line items shall be cause for rejection of the quote for all line items. Technical Evaluation Ratings Rating Description Acceptable Submission clearly meets the minimum requirements of the solicitation. Unacceptable Submission does not clearly meet the minimum requirements of the solicitation. If the technical submittal is determined "Unacceptable", it renders the entire quote technically unacceptable. Technical submissions that do not meet the minimum requirements will be rated as "Unacceptable" and will no longer be considered for further competition or award. (2) PRICE The vendor shall submit one (1) signed copy of the completed RFQ, and if applicable, executed copy of Amendments. The prices quoted shall be in accordance with the solicitation, and will be evaluated on the basis of price reasonableness in accordance with FAR 13.106-3. Price Quotes shall be held firm for sixty (60) days. Vendors shall include pricing for all line items listed. Failure to do this shall be cause for rejection of the quote for all line items. Vendors responding to this solicitation are advised that, prior to award, the government may request vendors to submit additional information/data to support price reasonableness such as copies of paid invoices for the same or similar items, sales history for the same or similar items, price list with effective date and/or copies of catalog pages along with any applicable discounts. Failure to submit the requested information may result in disqualification of the submitted quote. SELECTION: The Government intends to evaluate quotations and issue an award using the procedures of FAR Part 13.5, Simplified Procedures for Certain Commercial Items. The Government shall select the vendor whose quotation is the Lowest Price Technically Acceptable to the Government, considering price and technical compared to other quotations. The Government reserves the right to not issue an award if it is not in the best interest of the Government to make an award. System for Award Management (SAM): Vendors must be registered in the SAM database to be considered for award. Registration is free and can be completed on-line at http://www.sam.gov/. METHOD OF PROPOSAL SUBMISSION: Offers shall be emailed to contact@example.gov. All responsible sources may submit a quote which shall be considered by the agency. All quotes shall include price(s), a Point of Contact, name, email address, phone/FAX number, cage code, and business size. Each response must clearly indicate the capability of the quoter to meet all specifications and requirements.