Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Quality Assurance and First Article Testing (FAT) Services

Active

Federal

Response Deadline07/29/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the provision of Quality Assurance and First Article Testing services for newly approved suppliers, ensuring full compliance with AS9100 and Department of Defense standards. This includes conducting a thorough documentation review, performing physical and functional testing on sample units, and delivering detailed reports that verify conformance to technical specifications and quality requirements. The work is critical to validating supplier capabilities before production release and must be executed with precision to uphold defense program integrity. Performance of the services is to take place in Coffeyville, with all deliverables adhering to stringent military and aerospace quality protocols. The contract is classified as a subcontract under NAICS code 541330, indicating it falls within the Engineering Services category. Proposals must be submitted by July 29, 2026, with no set-aside designation specified. The effort is managed under the FA8121 AFSC PZAAA agency division within the Department of Defense, emphasizing the mission-critical nature of the quality validation process.

General Info

Perform QA and first article testing per AS9100 and DoD standards in Coffeyville for defense supplier validation.

Agency

Department Of Defense → FA8121 Afsc PzaaaView Agency

NAICS

541330 - Engineering ServicesView NAICS

Place of Performance

S Coffeyville, OK, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 8

subcontract

Response DeadlineJul 29

Submission deadline

Response Deadline

07/29/2026, 07:00:00 PM UTCin 7 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → FA8121 Afsc Pzaaa

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → FA8121 Afsc Pzaaa

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Perform First Article Testing for newly approved suppliers, including documentation review, sample testing, and reporting per AS9100 and DoD standards.

Similar Contracts

Same NAICS industry code

Construction Management Services IDIQThe Port of Seattle is seeking qualified firms to provide Construction Management services through an Indefinite-Delivery, Indefinite-Quantity (IDIQ) contract for a range of major construction projects. These services will span all phases of project delivery including planning, design, construction, and closeout, supporting delivery methods such as Design Build, Progressive Design Build, and other alternative procurement approaches. The goal is to ensure projects meet established schedules, budgets, and quality standards while enhancing operational efficiency and infrastructure development across the Port’s facilities. Performance will primarily occur at Port of Seattle locations, though specific sites may vary based on project needs. The contract is forecasted with a NAICS code of 541330, indicating professional services in architectural and engineering activities. Primary contact for inquiries is Hala Rabbo, with additional support from Project Manager Ann Davidson, and all communications should be directed via the provided email addresses and phone numbers. While the solicitation number is not yet assigned and the posting date reflects a future forecast date of July 22, 2026, interested parties should monitor the official Port of Seattle procurement portal for formal solicitation details and participation requirements.

Construction Management

POSTED

about 5 hours ago

DEADLINE

Retro-Commissioning, TAB, Controls, and Regulatory Support IDIQThe consultant will deliver retro-commissioning, test adjust and balance, controls, and regulatory support services across Seattle-Tacoma International Airport’s critical facilities and infrastructure systems, operating within a demanding 24/7/365 environment. The scope encompasses identifying and resolving operational deficiencies in mechanical, HVAC, plumbing, lighting, direct digital controls, smoke control, and fire protection systems to enhance performance, energy efficiency, occupant comfort, reliability, and system longevity while ensuring full compliance with safety and regulatory mandates. Work is executed through Service Directives and requires close collaboration with Aviation Facilities and Infrastructure to meet project deliverables within the constraints of continuous airport operations. The contract is structured as an indefinite-delivery/indefinite-quantity (IDIQ) under NAICS code 541330, administered by the Port of Seattle’s Aviation Facilities and Infrastructure division. Primary point of contact is Jason Gates, with Jim Farris serving as project manager, both reachable via the Port of Seattle’s official channels. All work must be performed at the airport location, with no specified set-aside criteria, and solicitations will be issued under the established IDIQ framework to select qualified providers for individual service tasks as needed.

Aviation Facilities & Infrastructure

POSTED

about 5 hours ago

DEADLINE

Quality Inspection and Sampling ServicesThis contract requires the provision of quality inspection and sampling services under the strict standards of MIL-STD-1916 or ASQ H1331, with an absolute requirement of zero non-conformances across all verification levels—critical, major, and minor. The work involves rigorous adherence to sampling protocols and inspection methodologies to ensure products meet uncompromising quality benchmarks, typical of defense and high-reliability applications. Services must be performed with precision and consistency to avoid any deviations that could result in rejection or non-compliance. The contract is structured as a subcontract under a Total Small Business Set-Aside designation, exclusively available to small businesses as defined by the SBA, and is classified under NAICS code 541330 for scientific and technical consulting services. It is issued by the ASC Commodities Division of the Department of Defense with a response deadline of August 5, 2026, and was posted on July 22, 2026. While specific performance location and point of contact details are not provided, interested parties must access the official DIBBS portal via the listed UI link to obtain full solicitation materials and submit proposals in accordance with federal procurement guidelines.

ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

Quality Assurance & Compliance DocumentationThis contract requires the performance of detailed quality inspections to ensure all products and processes meet stringent defense standards, with a specific focus on generating Certificate of Compliance and Quality (CoQC) documentation for each batch or unit. Traceability records must be meticulously maintained throughout the lifecycle of the supplied items to ensure full accountability and alignment with Defense Federal Acquisition Regulation Supplement (DFARS) and Defense Logistics Agency (DLA) mandates. The work is structured as a subcontract under the NAICS code 541330 and is managed by the ASC Commodities Division within the Department of Defense, with performance expected to be conducted in accordance with federal defense procurement protocols. All deliverables must be submitted and documented prior to the response deadline of July 29, 2026, and failure to comply with regulatory requirements may result in non-acceptance of deliverables or contractual penalties.

ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

Automation and Control System Integration

Philadelphia Gas Works

POSTED

about 10 hours ago

DEADLINE

Quality Control & Compliance Inspections

W6QM Micc-Ft Bliss

POSTED

about 10 hours ago

DEADLINE

Seaport Task OrderThis solicitation is for a Seaport Task Order under the Seaport NXG MAC program, exclusively open to holders of that contract vehicle. The solicitation number is N3319126R3000, issued by the Naval Facilities Engineering Systems Command Europe, Africa, and Central, an office under the Department of Defense. It was posted on July 17, 2026, with a response deadline of July 31, 2026, at 4:00 PM. The NAICS code 541330 identifies the work scope as engineering services. The primary point of contact is Marc Zurasky, reachable at marc.r.zurasky.civ@us.navy.mil, and the office is based in FPO, AE, 09622-0051. The place of performance is not specified in the details provided, and there is no set-aside designation indicated for this solicitation. Interested parties must submit responses through the SAM.gov portal linked in the posting.

Navfacsyscom Europe Africa Central

POSTED

about 10 hours ago

DEADLINE

NAWCAD Long Range Acquisition Forecast (LRAF) – FY26The Naval Air Warfare Center Aircraft Division (NAWCAD) Patuxent River is issuing the FY26 Long Range Acquisition Forecast (LRAF) to communicate upcoming procurement needs for engineering, technical, and program management support services across multiple naval aviation programs. This forecast, identified by solicitation number NAWCAD-LRAF-FY26-PAX, is strictly for planning purposes and does not constitute a solicitation, request for proposal, or binding obligation from the government. The services sought span the full lifecycle of airborne, shipboard, and ground-based systems, including systems and software engineering, modeling and simulation, cybersecurity, prototyping, integration, testing, logistics, and technical oversight under the Lead Systems Integrator® model. Core work is centered at NAWCAD Patuxent River, Maryland, with additional performance locations including Orange Park, Florida, and Webster Outlying Field. The forecast includes a range of contract actions anticipated through FY26 and beyond, with some efforts projected to be competed under Indefinite-Delivery/Indefinite-Quantity (IDIQ) vehicles such as SA IDIQ, while others are designated as Small Business Set Asides under NAICS code 541330. Estimated total potential value across all forecasted actions ranges from $10 million to $1 billion, with projected solicitations expected to issue in FY26 Q3 and awards not anticipated until FY27 Q2. Contract durations, where specified, are generally five years, with follow-on and re-compete opportunities identified for several programs. While no formal evaluation factors, contract clauses, or detailed specifications are included in this notice, the forecast references active and forthcoming contract numbers, funding codes, and program offices such as PMA-276, PMA-290, and WPM-201. No packaging, delivery, inspection, or payment terms are defined at this stage, and submission guidelines or proposal formats are not provided. This forecast serves as an early indicator of upcoming opportunities and updates will be issued quarterly through the same channel.

Department Of The Navy

POSTED

about 10 hours ago

DEADLINE

Architectural Engineering Services - Veterans Affairs New Medical Center San Antonio SATOCThe contract under solicitation number W9126G26RA040 is for Architectural-Engineering services to support the design and construction of a new Veterans Affairs Medical Center in San Antonio, Texas, replacing the existing Audie L. Murphy Memorial Veterans Hospital. The project involves delivering a comprehensive 1.6 million gross square foot facility complex on a 59-acre site owned by the San Antonio Medical Foundation, including a 1.325 million GSF hospital, a 79,000 GSF administration building, a 2,500-stall parking structure, a central utility plant, and associated campus infrastructure such as stormwater management, utility distribution, landscaping, and security systems. The contract will be structured as a firm-fixed-price Single Award Task Order Contract with a ten-year ordering period and a total capacity not to exceed $90 million. Offerors must demonstrate proven experience in designing large-scale healthcare facilities using VA Technical Information Library criteria and possess the capacity to manage multiple concurrent task orders, with an emphasis on team collaboration, quality management, and local knowledge of San Antonio’s geological, hydrologic, and construction market conditions. Participation from small businesses, including SDB, WOSB, HUBZone, Veteran Owned, and SDVOSB firms, is encouraged and will be evaluated as a tie-breaking factor. All proposals must be submitted electronically via the PIEE Solicitation Module by the deadline of July 21, 2026, using the Standard Form 330 in searchable PDF format with hyperlinks and bookmarks, and must include the firm’s Unique Entity ID and CAGE code. Proposals will be evaluated based on specialized experience and technical competence in healthcare design, professional qualifications of key personnel, knowledge of local conditions, and overall capacity to deliver, with small business participation and geographic proximity to the project site serving as secondary tie-breakers. Technical compliance demands adherence to VA and DoD design manuals including the Physical Security Design Manual and Handbook 0730, compliance with NIST SP 800-171 and DFARS 252.204-7020 cybersecurity standards, and strict implementation of quality management plans aligned with ER 1110-1-12 and ER 1110-3-12. Contractors must use E-Verify for employment eligibility, submit all invoices on Engineer Form 93, provide monthly progress reports detailing schedule, risks, and next steps, and

W076 Endist Ft Worth

POSTED

about 10 hours ago

DEADLINE

ENGINEERING SERVICES

POSTED

about 10 hours ago

DEADLINE

System Technical Support and Sustainment System Technical Support services for the AMPV and M113 Families of Vehicles.

W4GG Hq US Army Tacom

POSTED

about 10 hours ago

DEADLINE

NATO Business Opportunity: SHAPE Radio Overhaul

Bureau Of Industry And Security

POSTED

about 10 hours ago

DEADLINE

More opportunities from Department Of Defense → FA8121 Afsc Pzaaa

Same awarding agency

SPEED MAC - STRATEGIC PROCUREMENT FOR ENGINE EXCELLENCE AND DELIVERY SPEED MULTIPLE AWARD IDIQ. The U.S. Air Force is soliciting proposals for a Multiple Award Indefinite Delivery Indefinite Quantity (IDIQ) contract to support the repair, overhaul, remanufacture, and new manufacture of parts for the F100-PW-220/229 Pratt & Whitney engine, serving both the U.S. Air Force and Foreign Military Sales programs. This effort is critical to sustaining operations at the Oklahoma City Air Logistics Complex and supplementing essential services at Tinker Air Force Base. The contract will be awarded under the Revolutionary FAR Overhaul framework using both Firm-Fixed-Price and Cost-Reimbursable line items, with no restrictions on foreign participation. All proposals must be submitted through the Procurement Integrated Enterprise Environment (PIEE) Solicitation Module, with the deadline set for August 17, 2026, at 12:00 PM Central Time. A virtual proposal conference is scheduled for July 23, 2026, to provide further clarification. The basic contract term is five years, with an optional five-year extension, resulting in a potential ten-year performance period. Each individual task or delivery order will have its own specified period of performance, funded upon issuance, with a minimum order guarantee confirmed after the post-award conference. Ordering will follow RFO 16.506 and 16.507 guidelines, and commercial, non-commercial, sole source, and competitive clauses will apply as appropriate. While the initial scope centers on the F100 engine, the contract is structured to allow future inclusion of additional platforms such as the TF33. The solicitation number is FA812126RB002, with point of contact Felicia Rogers at Tinker Air Force Base, Oklahoma, and the place of performance is listed as Coffeyville, Oklahoma.

Aircraft Engine and Engine Parts Manufacturing

POSTED

about 10 hours ago

DEADLINE

Repair of TF33 Turbine Exhaust Case, NSN:2840-01-167-9586RV, 2840-00-967-3951RVThe contract seeks proposals for the repair of the TF33 turbine exhaust case, identified by NSN 2840-01-167-9586RV and 2840-00-967-3951RV, under solicitation number FD20302602443. This sources-sought notice is issued by the Department of Defense through the AFSC PZAAA office located at Tinker AFB, Oklahoma, with a NAICS code of 336413 for aircraft engine and engine parts manufacturing. Interested parties must submit responses by August 3, 2026, at 8:00 PM ET, and all work is expected to be performed at the designated government facility without specific performance location details provided. The primary point of contact for inquiries is John Freeman, reachable via email at John.Freeman.16@us.af.mil, and additional information is available through the official SAM.gov portal link associated with the opportunity. No specific set-aside provisions are indicated for this solicitation.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

FD2030-26-02308The contract under reference FD2030-26-02308 pertains to the procurement of a remote control lever, identified by NSN 3040-01-267-7734NZ and governed by drawing number 4067415 with revision 16 dated 30 October 2025, and carries the MDC code WGA. The item is classified under NAICS code 336413, indicating its alignment with aerospace product and parts manufacturing, and is being solicited by the Department of Defense through the Afsc Pzaaa office located at Tinker AFB, Oklahoma. The solicitation was posted on 15 July 2026 with a response deadline set for 15 July 2027, allowing vendors ample time to prepare and submit proposals. The point of contact for the procurement is Sherry A Jackson, and the contract is issued under a special notice type with no set-aside designation, implying it is open to all qualifying offerors without restriction based on business size or categorization. Performance location details are unspecified, but the contracting activity originates from and is managed by the designated Air Force office at Tinker AFB.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

Spares Procurement of F100 Seat, Bearing. NSN: 3110-01-454-4610NZThe solicitation seeks information on the procurement of spares for the F100 Seat and Bearing, identified by NSN 3110-01-454-4610NZ, under a sources-sought notice issued by the Department of Defense through office FA8121 Afsc Pzaaa located at Tinker AFB, Oklahoma. The contracting activity is not utilizing any set-aside programs, making it open to all eligible vendors. The North American Industry Classification System code 336412 indicates the focus is on aircraft engine and engine parts manufacturing. Responses are due by July 29, 2026, at 8:00 PM Eastern Time, with the solicitation posted on July 14, 2026. Point of contact for inquiries is John Freeman, reachable via email at John.Freeman.16@us.af.mil. The place of performance details are not specified, and all submissions should be made through the provided SAM.gov portal link.

Aircraft Engine and Engine Parts Manufacturing

POSTED

DEADLINE

Cybersecurity Compliance and CDI ProtectionThe contract requires the implementation and maintenance of cybersecurity controls aligned with NIST SP 800-171 to safeguard Covered Defense Information across all systems and environments under the agreement. Compliance must include robust incident response procedures and mandatory reporting of cybersecurity incidents in accordance with DFARS 252.204-7012, ensuring timely communication of breaches or unauthorized access. The contractor is responsible for sustaining these controls continuously, performing regular assessments, and demonstrating adherence through documentation and audit readiness. This subcontract is tied to Department of Defense operations under the NAICS code 541512, with performance expected to occur in Coffeyville. The solicitation was posted on July 8, 2026, and responses are due by July 29, 2026. All work must be executed in full alignment with federal cybersecurity standards for defense contractors, with no allowances for deviation from the required NIST controls or DFARS reporting obligations. The contract places strict accountability on the subcontractor to protect sensitive information and respond appropriately to any security events, emphasizing vigilance and compliance throughout the performance period.

Computer Systems Design Services

POSTED

DEADLINE

Critical Safety Item (CSI) Logistics and FMS Compliance SupportThe contract involves comprehensive logistics coordination and documentation support for FMS-designated Critical Safety Items, requiring strict adherence to traceability protocols, secure packaging, and timely shipping procedures. All activities must align with Defense Logistics Agency standards, including the accurate and timely submission of required data packages to ensure compliance with international military assistance programs. The scope emphasizes end-to-end management of these high-sensitivity items from handling through delivery, with an absolute focus on maintaining chain-of-custody integrity and regulatory compliance throughout the supply chain. Performance is expected to be centered in Coffeyville, with all operations governed by NAICS code 488510, indicating specialized freight forwarding and logistics services. As a subcontract under the Department of Defense’s Air Force Space Command organization, the work must support FMS obligations and meet stringent DoD security and reporting requirements. Bidders must submit proposals by July 29, 2026, and are expected to demonstrate proven experience in handling critical safety items within defense logistics frameworks, ensuring all documentation and physical handling meet federal and international compliance standards without deviation.

Freight Transportation Arrangement

POSTED

DEADLINE

High-Pressure Fuel Valve SupplyThe contract requires the supply of eight high-pressure fuel pressure valves identified by NSN 2915-01-230-9488 for Foreign Military Sales, with deliveries scheduled in phases to the Defense Logistics Agency location in Oklahoma. The valves are critical components intended for military aviation or defense systems, and the phased delivery schedule ensures alignment with operational timelines and logistics capacity. The work is performed under a subcontract mechanism, with the primary overseeing agency being the U.S. Air Force through the FA8121 Afsc Pzaaa office, operating under the Department of Defense. The opportunity was posted on July 8, 2026, with a response deadline of July 29, 2026, allowing potential suppliers a limited window to submit proposals. The North American Industry Classification System code 332994 indicates the manufacturing of other miscellaneous fabricated metal products, consistent with precision valve production. Performance of the contract is tied to Coffeyville, Oklahoma, suggesting potential involvement of local logistics or inspection facilities. Despite the lack of specified point of contact or detailed set-aside provisions, the transaction is subject to federal procurement protocols for foreign military sales and must comply with all applicable Defense Federal Acquisition Regulation Supplement requirements, including export controls and end-use certifications.

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

DEADLINE

Fuel Pressurizer ValveThe contract is for the procurement of eight Fuel Pressurizer Valves, identified by NSN 2915-01-230-9488 and part number 4062056, under a sole source, firm fixed price arrangement. The valves are classified as spare parts and are designed to maintain minimum pressure in the main fuel system, constructed primarily from Material Groups 12 and 17 as defined in Technical Order 00-25-113-F100-ENG. The item dimensions are 6.3000 inches in length and width, and 10.5000 inches in height, weighing 1.9000 pounds. Delivery is staggered: seven units must be delivered on or before August 23, 2027, and one unit by February 28, 2029, all destined for the DLA Distribution Depot in Oklahoma. The solicitation is not set aside for small business and is open only to pre-qualified sources who must have been formally approved prior to the proposal closing date; pending source approval requests will not delay award. First Article Testing is mandatory for newly approved sources, and each unit exceeds the $5,000 threshold, triggering Item Unique Identification (IUID) requirements. The acquisition is part of a Foreign Military Sales (FMS) program and does not involve export control restrictions. Funding is not yet available, and the government retains the right to cancel the solicitation without obligation to reimburse any offeror costs. Electronic submission via www.beta.sam.gov is required, and hardcopies will not be provided. All inquiries must follow specified procedures, including submission of Source Approval Requests through DoD SAFE and communication with designated government contacts. An Ombudsman is available for confidential feedback during the proposal phase but does not influence evaluation. The Contracting Officer for this effort is Savannah Mincey.

Aircraft Engine and Engine Parts Manufacturing

POSTED

DEADLINE

F100 - Control Exhaust Nozzle, NSN 2995014502816NZ, P/N 4083931The contract solicitation pertains to the procurement of a Control Exhaust Nozzle identified by NSN 2995014502816NZ and part number 4083931, intended as a spare component for F100 systems. The solicitation, issued under reference number FA812126R0018, was posted on June 25, 2026, with a final response deadline of July 27, 2026, at 8:00 PM Eastern Time. This is a presolicitation notice, indicating an early stage of the acquisition process designed to gather market interest and feedback prior to issuing a formal request for proposal. The contract is being managed by the U.S. Air Force, specifically the AFSC PZAAA office located at Tinker Air Force Base in Oklahoma, under the Department of Defense. There is no designated set-aside classification specified, and the North American Industry Classification System code has not been assigned. All inquiries and communications should be directed to Treva Billinger, the primary point of contact,可通过电话 405-734-0260 or email TREVA.BILLINGER@US.AF.MIL. The performance location details have not been specified, and the full solicitation details are accessible through the SAM.gov platform.

POSTED

DEADLINE

F100 Module Kit, Servo VA, NSN 2915012240747NZ, P/N 351009-ISSAThe contract solicitation FA8121-26-R-0017 is for the procurement of F100 Module Kits, Servo VA, identified by NSN 2915012240747NZ and part number 351009-ISSA, under a Firm Fixed Price contract type. The solicitation is set aside with no socioeconomic set-aside and falls under NAICS code 336412, administered by the Department of the Air Force through AFSC PZAAA at Tinker AFB, Oklahoma. Delivery is required F.O.B. origin, with shipment destined to locations including Tinker AFB and DLA Distribution Depot Oklahoma, and the estimated quantities per CLIN range from a minimum of 19 to a maximum of 57 units for the primary line item, with additional fixed quantities for spare units and data deliverables. All items must comply with military packaging standards MIL-STD-2073-1E and marking requirements per MIL-STD-129R, including barcoding using Data Matrix ECC200 per MIL-STD-130 and ISO/IEC 15434, and wood packaging must meet ISPM No. 15. Inspection and acceptance occur at origin, with the contractor responsible for quality control until formal government acceptance, guided by clauses 52.246-2, 52.246-11, and company-specific standards such as Pratt & Whitney VIS and LPR-QPR-018 for nondestructive testing. Technical deliverables include a First Article Test Plan and Report, supported by metallurgical and mechanical test results, calibration records, and retained remnants from destructive testing. Invoicing must be submitted exclusively through WAWF, with no use of IPP permitted. Payment terms include a discount for prompt payment, and compliance with cybersecurity and supply chain security regulations is mandated through clauses including DFARS 252.204-7012, 7008, and 7003, along with FAR 52.204-29 regarding covered telecommunications equipment disclosures. The solicitation requires offers to be submitted by 12:00 PM local time on August 11, 2026, via electronic submission to WAWF or hand delivery to the designated address, with no pricing data provided in Section B, rendering the total contract

Aircraft Engine and Engine Parts Manufacturing

POSTED

DEADLINE

Logistics and F.O.B. Origin Delivery CoordinationThe contract requires the management of packaging, labeling, and shipment of finished servo valve modules from the contractor’s facility to Tinker Air Force Base or Department of Defense depots, with strict adherence to WAWF compatibility standards to ensure seamless transactional and tracking processes. Timely delivery is critical, as the success of the contract hinges on meeting scheduled timelines without delay, supporting the operational readiness of military systems. All logistics activities must align with DoD requirements, including proper documentation and compliance with federal supply chain protocols. The contract is classified as a subcontract under NAICS code 484220, which pertains to truck transportation for specialized freight, indicating the reliance on specialized logistics services for handling sensitive and precision-engineered components. The solicitation was posted on June 24, 2026, with a response deadline of July 24, 2026, at 8:00 PM, and is managed by the Department of Defense through the FA8121 Afsc Pzaaa office. While no specific place of performance or point of contact is provided, all shipments must originate from the contractor’s facility and terminate at designated DoD locations, requiring robust coordination across multiple logistical endpoints to maintain mission-critical readiness.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Cybersecurity and CUI Compliance SupportThis contract provides comprehensive cybersecurity support to ensure full compliance with DFARS clauses 252.204-7008 and 252.204-7003, focusing on the protection of Controlled Unclassified Information and adherence to NIST SP 800-171 requirements. The scope includes conducting detailed assessments of current cybersecurity controls, implementing necessary safeguards for CUI, and establishing robust incident reporting procedures to meet federal standards. All activities must align with Department of Defense mandates and are intended to support subcontractors operating under Federal Acquisition Regulation frameworks. The contract is classified as a subcontract under NAICS code 541512, indicating specialized information technology services, and is issued by the Air Force Life Cycle Management Center under the Department of Defense. The solicitation was posted on June 24, 2026, with a firm deadline for responses on July 24, 2026, at 8:00 PM EDT. Performance location and point of contact details are not provided, but work is expected to support DoD systems and supply chain partners requiring CUI handling capabilities. The effort is critical for maintaining eligibility to work on defense-related projects and necessitates documentation, training, and continuous monitoring to satisfy audit and compliance obligations.

Computer Systems Design Services

POSTED

DEADLINE