Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Quality Control and Compliance Documentation

Active

Federal

Response Deadline07/31/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract titled Quality Control and Compliance Documentation requires the preparation and submission of detailed compliance documentation for products, including product data sheets, certificates of compliance, and seismic qualification reports, all aligned with FAA, MIL-STD, and ASTM standards to ensure adherence to federal technical and safety requirements. The work is tied to a subcontract under a Total Small Business Set-Aside, designated under NAICS code 541620 for engineering services, and is issued by the Department of Transportation through its 697DCK Regional Acquisitions Svcs office, with performance expected in Farmington, MN, zip code 55024. The opportunity was posted on July 8, 2026, and responses must be submitted no later than 7:00 PM EDT on July 31, 2026, indicating a focused window for qualified small businesses to respond. The contract emphasizes precision and regulatory alignment, placing strong demand on technical accuracy and timely delivery of documentation to support procurement and deployment of compliant components.

General Info

Small business to submit FAA, MIL-STD, ASTM-compliant documentation in Farmington, MN by July 31, 2026.

Agency

Department Of Transportation → 697DCK Regional Acquisitions SvcsView Agency

NAICS

541620 - Environmental Consulting ServicesView NAICS

Place of Performance

Farmington, MN, 55024, USA

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 8

subcontract

Response DeadlineJul 31

Submission deadline

Response Deadline

07/31/2026, 07:00:00 PM UTCin 13 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Transportation → 697DCK Regional Acquisitions Svcs

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Transportation → 697DCK Regional Acquisitions Svcs

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Preparation and submittal of compliance documentation including product data, certificates of compliance, and seismic qualification reports per FAA, MIL-STD, and ASTM standards.

Similar Contracts

Same NAICS industry code

CT 12356 - Noise Insulation Program Consulting ServicesThe contract titled CT 12356 - Noise Insulation Program Consulting Services is a solicitation issued by the California Procurement Services agency under the SLED organization type, aimed at securing consulting services to support a noise insulation program. The solicitation was posted on July 17, 2026, with a response deadline of August 13, 2026, and is managed from the agency’s office in San Francisco, California. The primary point of contact is Anna Severt, Project Manager, reachable via email and phone, with Rochelle Laxamana, Principal Administrative Analyst, serving as the secondary contact for additional inquiries. The place of performance is within the state of California, though the specific city is not designated. This solicitation seeks expert consulting services related to noise insulation, likely involving assessment, planning, and implementation support for mitigating noise impacts, though the full scope of work is not detailed in the provided data. There is no indicated set-aside classification or NAICS code, suggesting the contract is open to general competitive bidding. The procurement is administered through the California government’s open procurement portal, and interested vendors must submit responses by the stated deadline to be considered. All communications and submissions are expected to be directed to the provided contact information, with the understanding that services will be performed throughout the state of California.

Procurement Services

POSTED

about 13 hours ago

DEADLINE

Food Manufacturing Systems Implementation & Regulatory ComplianceThe contract requires the implementation of comprehensive food safety and regulatory compliance systems including HACCP, GMP, and SSOP, alongside full OSHA adherence, to support the activation of an assembly line within the PDC. The goal is to establish a fully compliant manufacturing environment that ensures product safety, worker protection, and alignment with federal standards, with all systems designed for seamless integration and operational readiness. The work must be completed under a subcontract arrangement, with strict deadlines requiring proposal submission by August 10, 2026, and the primary oversight is managed by Alcorn State University in Mississippi, under NAICS code 541620 for management consulting services.

ALCORN STATE UNIVERSITY

POSTED

about 16 hours ago

DEADLINE

Technical Reporting & Data ManagementThe contract under the title Technical Reporting & Data Management involves the provision of formal test reports, comprehensive data analysis, and quality assurance reviews aligned with military or ASTM standards, ensuring all deliverables meet stringent governmental technical requirements. All results must be securely transmitted to government authorities using authorized systems such as WAWF, guaranteeing compliance with defense data handling protocols and confidentiality standards. The work is performed under a subcontract and falls under NAICS code 541620, classifying it within scientific and technical consulting services, with the Defense Logistics Agency acting as the contracting entity under the Department of Defense. The performance location and specific office details are not specified, but the deliverables are intended for federal defense use and must adhere to official military documentation formats.

Defense Logistics Agency

POSTED

about 17 hours ago

DEADLINE

Sustainable Product Compliance & Certification SupportThe contract entails providing specialized consulting services to ensure full alignment with federal sustainable procurement initiatives, focusing on compliance with key programs managed by the EPA, ENERGY STAR®, USDA BioPreferred®, and SNAP. The work supports adherence to environmental and sustainability standards across federal supply chains, requiring expertise in product certification, regulatory interpretation, and documentation processes to meet mandated requirements. Services will involve evaluating products, verifying claims, and assisting stakeholders in navigating complex certification pathways to maintain eligibility under these federal green procurement guidelines. This subcontract is issued under the Defense Logistics Agency, part of the Department of Defense, with the NAICS code 541620 indicating management, scientific, and technical consulting services as the primary classification. The contract was posted on July 17, 2026, and is intended to facilitate federal compliance through expert guidance rather than direct product supply. While the exact location of performance is unspecified, the engagement is tied to nationwide DLA operations and requires adherence to federal sustainability mandates. The contractual obligations center on delivering accurate, timely, and auditable support to ensure products and procurement activities consistently meet evolving environmental standards.

Defense Logistics Agency

POSTED

about 17 hours ago

DEADLINE

Radioactive Materials Handling & Notification ServicesThe contract requires the assessment of components for radioactive content, with strict protocols to identify and report any instances where regulatory thresholds are exceeded directly to the Contracting Officer. All materials must be evaluated against defined safety and compliance standards to ensure no radiological hazards are inadvertently distributed. The contractor is obligated to maintain rigorous documentation and verification processes throughout the assessment phase to guarantee accuracy and accountability. Additionally, the contract mandates that all components be marked in full compliance with MIL-STD-129 standards for military labeling and shipment documentation. This includes proper identification, formatting, and placement of barcodes and other required markings to support traceability and handling across the defense logistics chain. The work falls under NAICS code 541620 and is administered by the Defense Logistics Agency under the Department of Defense, with performance expected to align with federal defense supply chain requirements without formal set-aside designation.

Defense Logistics Agency

POSTED

about 17 hours ago

DEADLINE

Hazardous Materials Compliance & SDS ManagementThe contract requires the identification of hazardous components within materials and systems, ensuring full compliance with OSHA’s Hazard Communication Standard 29 CFR 1910.1200 and Federal Standard No. 313. Primary responsibilities include the accurate preparation, maintenance, and distribution of Safety Data Sheets that meet federal regulatory requirements for chemical safety and hazard communication. All labeling associated with hazardous materials must be reviewed and updated to reflect current standards, ensuring clarity, completeness, and compliance across all stages of handling and distribution. This work supports the Defense Logistics Agency’s broader mission to maintain safety and regulatory integrity within Department of Defense supply chains. The subcontract is classified under NAICS code 541620, indicating it involves scientific and technical consulting services focused on environmental and safety compliance.

Defense Logistics Agency

POSTED

about 17 hours ago

DEADLINE

Hazardous Materials Labeling and ComplianceThe contract pertains to the application of hazard warning labels and the preparation of safety data sheets for hazardous components, ensuring full compliance with federal and Department of Defense regulations. This subcontract is specifically focused on the accurate labeling and documentation of hazardous materials to meet stringent safety and regulatory standards required for military and defense applications. The work is to be performed at Tracy, California with a zip code of 95304-5000, and the NAICS code 541620 indicates it falls under scientific and technical consulting services, suggesting a technical and compliance-driven scope. The solicitation was posted on July 17, 2026, with responses due by July 22, 2026, indicating a narrow timeframe for submission. The contracting organization is the Department of Defense under the Construction & Equipment T & IFO EQ office, and all activities must adhere to federal and DoD mandates governing hazardous material handling, transportation, and communication of associated risks.

CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

about 17 hours ago

DEADLINE

Sustainable & Regulated Product Sourcing ConsultantThe contract engages a consultant to provide advisory support for ensuring a water testing kit aligns with key federal sustainability mandates, including the EPA’s Safer Choice program under SNAP, the USDA BioPreferred Program, and the Federal Acquisition Regulation clause FAR 52.223-23 concerning environmentally preferable procurement. The work focuses on guiding product development and sourcing to meet federal environmental standards, ensuring compliance with requirements for biobased content, reduced environmental impact, and sustainable materials selection. The consultant will serve as a subject matter expert to navigate regulatory frameworks and support the contractor in adhering to mandatory green procurement policies. This subcontract is issued under the Department of Defense through the Defense Logistics Agency, categorized under the NAICS code 541620 for Management Consulting Services. The contract was posted on July 17, 2026, and is positioned as a subcontract within the broader defense acquisition structure, with no specified set-aside status. The place of performance and official contact details are not provided, but the work is expected to be conducted remotely or as needed to coordinate with the contracting team, leveraging expertise in federal sustainability compliance to validate the product’s alignment with environmental and procurement regulations.

Defense Logistics Agency

POSTED

about 17 hours ago

DEADLINE

Hazardous Materials Compliance and LabelingThe contract requires full compliance with OSHA HazCom standards and DFARS 252.223-7001 for all hazardous materials managed under the agreement, with a focus on producing accurate safety data sheets, applying compliant labeling, and maintaining rigorous regulatory tracking systems. The contractor must ensure that all hazardous substances are properly documented, labeled, and reported in accordance with federal occupational safety and defense procurement regulations, supporting safe handling and transportation across Department of Defense supply chains. This is a subcontract under the Defense Logistics Agency’s procurement, classified under NAICS code 541620 for environmental consulting services, and was posted on July 17, 2026. Performance is expected to support Defense Department operations without specified geographic limitations, and the contract is tracked under award number SPE7M326P1314. Success requires continuous monitoring of regulatory updates and implementation of standardized processes to meet both safety and contractual obligations for hazardous material management.

Defense Logistics Agency

POSTED

about 17 hours ago

DEADLINE

Supply of Hazardous Waste Management Plans (HWMP) and DocumentationThe contract entails the development and submission of site-specific Hazardous Waste Management Plans and Waste Management Plans in strict alignment with environmental regulations and military standards. The work requires careful assessment of facility operations, proper identification and classification of hazardous materials, and formulation of protocols for safe handling, storage, transportation, and disposal of waste. All documentation must meet the rigorous compliance requirements of federal and Department of Defense environmental policies, ensuring that each plan is tailored to the unique operational and geographic conditions of the assigned sites. This subcontract, issued under NAICS code 541620 by the Defense Logistics Agency within the Department of Defense, supports critical environmental management functions across military installations. The contractual obligations involve not only the creation of comprehensive, actionable plans but also the accuracy and timeliness of all related submissions, with an emphasis on audit readiness and regulatory adherence. The performance location and specific site details are not specified in the available data, but deliverables are expected to be coordinated with military personnel and environmental oversight entities to guarantee full operational and regulatory compliance. The award is accessible through the DIBBS platform, reflecting its formal standing within DoD procurement systems.

Defense Logistics Agency

POSTED

about 17 hours ago

DEADLINE

Regulatory Compliance and Documentation ServicesThe contract entails the preparation and management of regulatory documentation critical to environmental and transportation compliance, specifically focusing on EPA manifests, HIN codes, PG/LINE codes, and DLA Form 2505 invoicing. These activities are essential to maintaining adherence to RCRA, DOT, and Department of Defense regulations, ensuring proper handling, tracking, and reporting of hazardous materials and waste throughout the supply chain. The work requires specialized knowledge of federal compliance frameworks and meticulous attention to detail to avoid regulatory violations and support operational continuity for defense logistics. This is a subcontract under the Defense Logistics Agency, part of the Department of Defense, with a NAICS code of 541620 indicating it falls under environmental consulting and related services. The contract was posted on July 17, 2026, and its place of performance and specific office details are not provided, suggesting the scope may be flexible or nationwide. The UI link directs to a DIBBS portal record, indicating the award is managed through DoD’s defense procurement system, and the responsibilities are tied directly to supporting defense logistics operations through accurate and timely regulatory documentation.

Defense Logistics Agency

POSTED

about 17 hours ago

DEADLINE

Hazardous Materials Sampling & AnalysisThe contract requires on-site sampling and laboratory analysis to identify hazardous materials and hazardous waste at Aviano Air Base, with a specific focus on completing a Hazardous Waste Profile Sheet to document findings. Work must be performed in compliance with applicable environmental and safety regulations, ensuring accurate characterization of substances that pose potential risks to health or the environment. The scope involves field collection, proper chain-of-custody procedures, and analytical testing to determine the nature and extent of hazardous constituents present at the site. This is a subcontract under the Defense Logistics Agency, part of the Department of Defense, classified under NAICS code 541620 for environmental consulting services. The contract was posted on July 17, 2026, and performance is expected at Aviano Air Base, though exact location details are not specified. All activities must align with federal and military standards for hazardous waste management, and the contractor is responsible for delivering detailed, defensible data to support regulatory compliance and remediation planning. No set-aside provisions are indicated, and the work is governed by the terms of the underlying prime contract referenced in the provided link.

Defense Logistics Agency

POSTED

about 17 hours ago

DEADLINE

More opportunities from Department Of Transportation → 697DCK Regional Acquisitions Svcs

Same awarding agency

Materials Compatibility Test and Evaluation Services in support of Piston Aviation Fuels Initiative (PAFI) and Eliminate Aviation Gasoline Lead Emissions (EAGLE) programsThe Federal Aviation Administration is seeking qualified contractors to provide materials compatibility laboratory testing and evaluation services in support of the Piston Aviation Fuels Initiative and Eliminate Aviation Gasoline Lead Emissions programs, with the work to be performed at locations within the Continental United States under a 36-month period of performance extending from July 1, 2026, to June 30, 2028. The solicitation, designated 697DCK-26-R-00186, is open to the full and open market under NAICS code 541380 with a size standard of $19.0 million, and anticipates awarding a hybrid contract combining Firm Fixed Price for non-severable testing services and Labor Hours for severable research services. Proposals must include a Technical Proposal and a Business Proposal, addressing mandatory pass/fail gates: at least three relevant projects completed in the past five years, two independently submitted Customer Satisfaction Surveys rated Satisfactory or higher, and complete pricing for all Contract Line Item Numbers as outlined in the Pricing Template. The solicitation incorporates by reference numerous AMS clauses governing organizational conflicts of interest, illegal activity recovery, order of precedence, subcontractor responsibilities, payment procedures, and termination rights, with all terms subject to the Acquisition Management System rather than the FAR. The Materials Test Matrix, defined in the Statement of Work, dictates required testing protocols for fuel-wetted metallic and non-metallic materials, distribution hoses, linings, filters, and specific test rigs such as RTP-004 and RTP-005, with samples subject to hazardous materials regulations and fuel stored only in FAA-approved sealed containers. All deliverables, including draft and final reports, must be submitted electronically in specified formats within strict timelines—drafts within 30 days of testing completion and final versions within 20 days of FAA comments—and must be properly marked with contract number, contractor details, and delivery status. The Government will award a single contract based on the Lowest Priced, Technically Acceptable method, and failure to submit any required documentation, including SAM registration with a valid UEI, past performance surveys, or properly completed pricing sheets, will result in rejection. Proposals must be submitted by the final deadline of July 31, 2026, at 1500 hrs ET, with all amendments posted publicly and offerors responsible for monitoring updates. The Contracting Officer, Richard Palsgrove, holds sole

Testing Laboratories and Services

POSTED

about 22 hours ago

DEADLINE

Fire Alarm System, Sprinkler System and Fire Pump Testing and Inspection services at Mineta San Jose International Airport, Air Traffic Control Tower (ATCT)The Federal Aviation Administration is soliciting proposals for annual testing and inspection services of the Fire Alarm System, Sprinkler System, and Fire Pump at the San Jose Air Traffic Control Tower located at 275 Martin Ave., Santa Clara, CA 95050. This procurement, identified as Solicitation Number 697DCK-26-R-00147, is a Firm-Fixed-Price contract under NAICS code 561621 and will be awarded using a lowest priced, technically acceptable (LPTA) methodology. The requirement is detailed in the Statement of Work, which mandates compliance with NFPA 13, NFPA 20, and NFPA 25 standards for system inspections, including valve tests, drain testing, alarm signal verification, and visual evaluations of components. Deliverables include advance notification letters, posted signage, cause and effect matrices, device address lists, and final reports stamped by a NICET Level III technician. The base performance period runs from August 1, 2026, to July 31, 2027, with up to three option years extending through July 31, 2031, for a maximum contract duration of 66 months, subject to government discretion and written notice. All proposals must be submitted electronically by 5:00 p.m. Eastern Time on July 20, 2026, and must include one complete electronic copy adhering to the structure outlined in Section L, including a signed offer form, business proposal, and completed representations and certifications. Offerors must be registered in the System for Award Management with a valid Unique Entity Identifier and must certify compliance with numerous federal requirements including the Buy American Act, prohibition against inverted domestic corporations, and disclosure of AI usage in proposal preparation. Pricing must be submitted for each Contract Line Item with no material imbalances, or the offer will be rejected. Site visits are optional and scheduled for July 8, 2026, with attendance limited to two representatives per company and requires registration by July 7, 2026. All communications during solicitation must be conducted via email to Anna F. Glover at anna.f.glover@faa.gov; phone calls are prohibited. Upon award, contractors must comply with FAA facility security protocols, including export control reviews for foreign nationals, use of the VAP system for quarterly roster updates, adherence to photography restrictions per FAA Order 1600.

Security Systems Services (except Locksmiths)

POSTED

about 22 hours ago

DEADLINE

Refurbish/Repaint Antenna TowersThe solicitation 697DCK-26-R-00351 seeks a small business contractor to refurbish and repaint three 75-foot steel antenna towers located in Shelton, Connecticut, under a Firm-Fixed Price contract with a total performance period of 90 calendar days. The work involves surface preparation to SSPC-SP 2, SSPC-SP 3, and SSPC-SP 11 standards, removal of hazardous materials including lead-based paint, chromium, cadmium, and assumed PCBs, and application of a specified coating system using Tnemec products in defined thicknesses and colors. Extensive environmental and safety compliance is mandated, requiring a site-specific Health and Safety Plan, OSHA and EPA compliance, Class 3P containment, hazardous waste manifests, and disposal at approved facilities in accordance with Connecticut DEEP and federal regulations. All debris must be removed daily and the site left clean upon completion. Additional scope includes recoating the ladder-mounting areas of an existing MSA Dynaglide system, sealing concrete foundations, replacing ground connections with hot-dip galvanized ASTM A325 bolts, and installing a new 2.5’x2.5’ steel plate on each tower platform with re-drilled bolt holes. The contractor must protect underground communication cables and review as-built drawings to avoid impacts on existing equipment. A contract option exists to coat a separate 200-foot lattice tower, requiring separate line-item pricing in the base bid. Performance bonding is mandatory for proposals exceeding $150,000, and the solicitation has clarified that this threshold supersedes prior conflicting information; both performance and payment bonds at 100% of the contract value are required. All proposals must include a signed offer form, cover letter affirming no exceptions to contract terms, complete price proposal aligned with the Statements of Work and Davis-Bacon wage rates, Section K representations, and a certificate of liability insurance. The technical proposal must demonstrate a thorough understanding of the scope with a detailed approach and schedule, while past performance must prove at least five years of experience in hazardous material abatement and two similar projects completed in the last five years. Proposals are evaluated on a Lowest Price Technically Acceptable basis, requiring all factors to be rated acceptable. Submission is exclusively via email to the Contracting Officer by noon Eastern Time on July 20, 2026. Contractors must comply with strict security protocols, including background checks for all personnel accessing FAA

Painting and Wall Covering Contractors

POSTED

DEADLINE

The Federal Aviation Administration (FAA) intends to establish a Qualified Vendors List (QVL) for Cab Glass repair and/or replacement in various US locations.The Federal Aviation Administration (FAA) is establishing a Qualified Vendors List (QVL) for the repair and replacement of glass window units in Airport Traffic Control Tower (ATCT) cabs and base buildings across the contiguous United States, under solicitation 697DCK-26-R-00219. This initiative, originally issued as a small business set-aside on June 15, 2026, has been amended to open full and open competition with a new proposal deadline of July 29, 2026, at 12:00 p.m. Eastern Time. The QVL is divided into three geographic service areas—Western, Central, and Eastern—and vendors may apply to one or all areas. While the estimated total value over five years is $10 million, this figure is only an estimate with no dollar cap per individual order, which will be issued as Firm-Fixed Price (FFP) task orders negotiated on a project-by-project basis. The FAA retains the right to make direct awards if deemed in its best interest, and vendors on the QVL will be evaluated annually for performance and responsiveness. Proposals must strictly adhere to a 20-page limit, excluding supporting documents such as Past Performance Questionnaires, bank letters, and bonding company letters, with elaborate submissions discouraged to avoid perceptions of non-cost-consciousness. Evaluation is based on four non-weighted factors: Corporate Experience, Past Performance, Plan of Execution, and Key Personnel. For Corporate Experience, applicants must submit five relevant projects involving glass or glazing installations valued over $40,000 with at least 120 square feet of glass, completed or nearly complete within the past five years, performed on ATCTs or commercial high-rises above 60 feet AGL. Past Performance requires signed Evaluation Data Forms from clients addressing quality, schedule, cost control, and technical compliance, with the FAA permitted to verify information through CPARS or direct contact. The Plan of Execution demands detailed descriptions of order management, quality control processes (including applicable certifications), safety management (including EMR, DART, and TCR rates over five years), risk mitigation strategies, and capacity to handle multiple simultaneous orders. Key Personnel requirements include a Project Manager with ten years of experience and a Project Foreman certified under AGMT or able to obtain certification prior to award, along with resumes and written acknowledgment of on-site supervision. Offerors must be registered in SAM with a UEI, comply with

Glass and Glazing Contractors

POSTED

DEADLINE

Market Survey: Consolidated Elevator Maintenance at Kona & Honolulu ATCT

All Other Specialty Trade Contractors

POSTED

DEADLINE

CDC ARSR HVAC ReplacementThe Federal Aviation Administration is soliciting proposals for the replacement of two existing HVAC units at the CDC ARSR facility in Brian Head, Utah, under solicitation number 697DCK-26-R-00330. The contract requires the removal and proper disposal of the current HVAC systems, including ducting and controls, and the installation of two new 15-ton York air-cooled self-contained packaged air conditioning units or FAA-approved equivalents, along with all necessary associated components. The acquisition is set aside exclusively for small businesses under NAICS code 238220, with a projected budget between $250,000 and $500,000 and a performance period of approximately 60 calendar days. The FAA plans to award a Firm Fixed Price contract, and all submissions must include both a technical and cost proposal in accordance with the specified requirements. All proposals must be submitted electronically via email to Marc Lemay and Suzanne Huggins no later than 3:00 PM EDT on August 13, 2026, with file sizes not exceeding 10 MB per message and no zipped formats permitted. An optional site visit is scheduled for July 30, 2026, at 10:00 AM at FR 277, Brian Head, UT, but attendance requires advance notice by July 27, 2026, and failure to register will result in cancellation without notice. Questions and requests for information must be submitted in writing via email no later than August 4, 2026, and no telephone inquiries will be accepted. Offerors must be currently registered in SAM.gov and respond to all requirements in full; late or incomplete submissions will not be considered. The FAA will not issue individual notifications of amendments, and offerors are responsible for monitoring the procurement website for updates. This solicitation does not constitute a contractual obligation, and the government will not reimburse any costs incurred in preparing responses.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

Landscaping and Snow Removal in Windsor Locks, CTThe Federal Aviation Administration is seeking a small business contractor to provide landscaping and snow removal services at the Bradley Air Traffic Control Tower in Windsor Locks, Connecticut, under solicitation 697DCK-26-R-00287. The requirement is set aside entirely for small businesses, with the NAICS code 561730 and a size standard of $9.5 million in annual receipts. The contract is expected to be awarded on a firm-fixed-price basis with a base year running from November 1, 2026, through October 31, 2027, and four optional one-year extensions, making the total potential contract duration five years. Landscaping services cover approximately 120,000 square feet, including grass and paved areas, and require spring cleanup, weed control, mulching, and reseeding from April through September each year. Snow removal services demand response within two hours of three inches of accumulation, with mandatory clearing of six-foot radii around fire hydrants and three-foot radii around sign floodlights, using equipment with a minimum five-ton capacity and seven-foot blade width. All work must adhere to the detailed Statements of Work attached to the solicitation, including specific performance standards and minimum equipment requirements. Offers must be submitted electronically via email to Stephanie Pfeiff at stephanie.pfeiff@faa.gov no later than July 24, 2026, at 3:00 PM EST, with all questions submitted by July 10, 2026, at the same time. Bidders must be registered in the System for Award Management (SAM) with a valid Unique Entity Identifier prior to submission and maintain registration throughout the contract lifecycle. Proposals are evaluated using a lowest-priced, technically acceptable method, with past experience and past performance serving as pass/fail gates: offerors must submit at least three similar contracts completed within the last five years and at least three customer satisfaction surveys from third parties, all received by the deadline with an average rating of “Good” or higher. Contractors must demonstrate key personnel, carry liability insurance meeting FAA standards, and ensure personnel comply with FAA security orders including background checks and export control reviews. Electronic invoicing via the Delphi portal and authentication through www.login.gov is mandatory, and payment will be processed by electronic funds transfer using SAM data. The contractor must also submit a Continuity of Contract Performance Plan within ten days of award, detailing procedures for maintaining operations

Landscaping Services

POSTED

DEADLINE

Surface Preparation and Contamination ControlThe contract involves the cleaning and preparation of HVAC piping and equipment surfaces to eliminate oil, grease, and other contaminants before adhesive and insulation are applied, ensuring optimal bonding and performance. This work is critical for maintaining system efficiency and longevity, and must be performed to precise standards to meet technical and safety requirements. The activity is set aside exclusively for small businesses under the SBA's Total Small Business Set-Aside provisions, with the NAICS code 561790 identifying it as other support activities for building operations. The performance location is specified as Farmington, Minnesota, with a zip code of 55024, and the contracting office is the Department of Transportation’s 697DCK Regional Acquisitions Services. The solicitation was posted on July 8, 2026, and responses are due by July 31, 2026, at 7:00 PM Eastern Time. This is a subcontract opportunity, meaning the winning bidder will be engaged by a prime contractor to fulfill the specified surface preparation work. While there is no designated point of contact listed in the provided data, interested parties must submit their proposals through the official SAM.gov portal linked in the posting. Compliance with contamination control protocols and adherence to small business certification requirements are essential for eligibility and award consideration.

Other Services to Buildings and Dwellings

POSTED

DEADLINE

Fire-Resistant and Seismic-Compliant Material InstallationThe contract entails the installation of fire-resistant and seismic-qualified adhesives and mastics specifically for HVAC insulation systems, with strict adherence to the International Building Code 2009, ASCE-7 standards for seismic design, and AHRI 640 performance specifications. The work is scoped to ensure material integrity under both high-temperature and earthquake-induced dynamic loads, requiring certified installation techniques and qualified personnel to meet federal safety and resilience benchmarks. The project will be performed in Farmington, Minnesota, with a zip code of 55024, and is structured as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the Small Business Administration are eligible to bid. The solicitation was posted on July 8, 2026, with a firm response deadline of July 31, 2026, at 7:00 PM Eastern Time. The North American Industry Classification System code is 238290, categorizing this as other building equipment contractors, which aligns with specialized mechanical system installations. The contracting agency is the Department of Transportation through its 697DCK Regional Acquisitions Services office, indicating this work supports federal infrastructure projects requiring compliance with rigorous environmental and structural safety codes. All materials and methods must be fully documented and verifiable to meet the technical and regulatory requirements outlined, with performance tied directly to code compliance and long-term system durability.

Other Building Equipment Contractors

POSTED

DEADLINE

Adhesives, Sealants, and Insulation SupplyThe contract is for the supply of MIL-spec adhesives including CP-10, CP-52, and CP-76, along with sealants and low-VOC insulation materials designed for indoor applications, all of which must comply with military specifications, environmental regulations, and HVAC standards. These materials are intended for use in facilities governed by stringent performance and safety requirements, ensuring durability, safety, and compliance with federal and industry benchmarks. The procurement is issued as a subcontract under a Total Small Business Set-Aside, restricting participation exclusively to small businesses as defined by the SBA, and is classified under NAICS code 325510 for chemical manufacturing. The solicitation was posted on July 8, 2026, with a response deadline of July 31, 2026, at 7:00 PM. Performance of the contract is to be carried out at a designated location in Farmington, Minnesota, with a ZIP code of 55024. The contracting activity is managed by the 697DCK Regional Acquisitions Services under the Department of Transportation, though no specific point of contact or office address details are provided. All proposals must meet the technical specifications for compliance with military and environmental standards and be submitted through the designated federal procurement portal.

Paint and Coating Manufacturing

POSTED

DEADLINE

Humidifier Supply and InstallationThe contract entails the supply, delivery, and installation of humidification units at the FAA Minneapolis ARTCC facility located in Farmington, Minnesota, with a zip code of 55024. The scope includes full mechanical and electrical integration of the new systems, as well as the removal and disposal of existing units, ensuring seamless transition and operational continuity. All work must culminate in thorough system commissioning to confirm that the humidification units meet specified performance criteria and are fully functional within the facility’s infrastructure. This is a total small business set-aside subcontract under NAICS code 238220, reserved exclusively for small businesses as defined by the SBA. The solicitation was posted on July 8, 2026, with proposals due by July 31, 2026, at 7:00 p.m. The contracting organization is the Department of Transportation through its 697DCK Regional Acquisitions Services office, and all performance activities are centered at the specified location in Farmington. The subcontract is intended to support critical environmental control systems at the air traffic control facility, ensuring optimal operational conditions for sensitive equipment and personnel.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

Humidifier Replacement - Minneapolis ARTCCThe Department of Transportation’s Federal Aviation Administration En Route Construction Branch is seeking qualified small businesses to replace humidifiers at the Minneapolis Air Route Traffic Control Center in Farmington, Minnesota, with an estimated project value between $250,000 and $500,000. This solicitation is a Total Small Business Set-Aside under NAICS code 236220, and all offers must be submitted electronically to mark.salum@faa.gov by noon Pacific Time on Friday, July 31, 2026. Submissions are limited to a total file size of less than 10MB per email, with offerors permitted to send multiple emails if necessary to comply with this restriction. A mandatory site visit is scheduled for Wednesday, July 22, 2026, at 9:00 AM local time at the Minneapolis ARTCC Guard Station, where attendees must present REAL-ID compliant identification and have pre-registered by noon Pacific Time on Monday, July 20, 2026, by emailing attendee names to both mark.salum@faa.gov and alexander.l.meyer@faa.gov. Any Requests for Information stemming from the site visit must be submitted by noon Pacific Time on Friday, July 24, 2026, and will only be addressed through formal solicitation amendments, not during the visit. The primary point of contact for the solicitation is Mark Salum, reachable at 206-231-3016 or mark.salum@faa.gov.

Commercial and Institutional Building Construction

POSTED

DEADLINE