Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

This Government Contract opportunity from Department Of Defense was posted on July 16, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Quality Inspection and Source Acceptance Services

Closed
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 541340
New
SLED
Missouri Orthopedic Institute - Room 1059 Replace OR 6 BoomThe University of Missouri - Columbia is seeking design services for the Missouri Orthopedic Institute to replace an existing single point Skytron boom with two point Stryker booms in Room 1059 of OR 6. This project is currently listed as a forecast under NAICS code 541340 for architectural, engineering, and design services. The primary point of contact for this requirement is Megan Haslag. Interested parties can find further information through the University of Missouri System's facilities planning and development construction portal.
University of Missouri - Columbia

POSTED

about 10 hours ago

DEADLINE

N/A
NAICS: 541340
New
SLED
Missouri Orthopaedic Institute - Room 1057 Replace OR 3 BoomThe University of Missouri - Columbia is seeking design services for the Missouri Orthopaedic Institute to modify Room 1057. The project involves replacing an existing single point Skytron boom with two point Stryker booms in Operating Room 3. This opportunity is listed as a forecast under NAICS code 541340. Interested parties can coordinate with the primary point of contact, Megan Haslag, or refer to the university's facilities planning and development portal for further details.
University of Missouri - Columbia

POSTED

about 10 hours ago

DEADLINE

N/A
NAICS: 541340
New
SLED
Missouri Orthopedic Institute - Room 1059 Replace OR 6 BoomThe University of Missouri - Columbia is seeking design services for the Missouri Orthopedic Institute to upgrade the equipment in Room 1059. The project specifically involves replacing an existing single point Skytron boom with two point Stryker booms within Operating Room 6. This opportunity is currently listed as a forecast under NAICS code 541340. Interested parties can coordinate with the primary point of contact, Megan Haslag, regarding the project requirements and procurement process.
University of Missouri - Columbia

POSTED

about 10 hours ago

DEADLINE

N/A
NAICS: 541340
New
SLED
Phase II Modernization of Seattle’s Standard Specifications for Road, Bridge & Municipal Construction
Solicitation # 26-071-S
Seattle Public Utilities is seeking proposals from qualified consultants for the Phase II Modernization of Seattle’s Standard Specifications for Road, Bridge and Municipal Construction. The selected consultant will be responsible for updating content, reorganizing the structure, and ensuring full ADA compliance for the City's Standard Specifications, which serve as the primary contract documents for public works construction within the City's Right of Way. These specifications consist of nine divisions and are typically revised every three years. The contract is estimated to have a total value between 120,000 and 150,000 dollars. Interested parties must submit their responses by September 24, 2026. This solicitation, identified by number 26-071-S, is managed by Seattle Public Utilities in Washington.
Seattle Public Utilities

POSTED

about 23 hours ago

DEADLINE

in 20 days
NAICS: 541340
New
Federal
MACH1_AOI_Military Working Dog Kennels at JBSA-LOE1_Amend 1
Solicitation # FA8903-26-OT002
The 772nd Enterprise Sourcing Squadron, in coordination with the Air Force Civil Engineer Center, is seeking an innovative commercial partner under the Modernized Agile Construction Horizons (MACH1) Umbrella Program to upgrade Military Working Dog (MWD) kennels at Joint Base San Antonio Lackland West and the Chapman Training Annex. The project is divided into two lines of effort: Line of Effort 1 (LOE 1) focuses on design and planning, while Line of Effort 2 (LOE 2) covers physical construction. The primary objective is to create facilities capable of housing and training 850 dogs. While the project originally mandated Engineered Tensile Fabric Structures (ETF) as the baseline, Amendment 1 removed this as a mandatory material to allow for non-traditional construction methods. Any resulting agreement will be executed as an Other Transaction Agreement (OTA) under the authority of 10 U.S.C. section 2808a. The current focus is on LOE 1, which requires the delivery of a mature, site-specific design package, an integrated systems plan featuring HVAC systems with 15 air changes per hour, a firm open-book Guaranteed Maximum Price (GMP), and a detailed construction schedule. All designs must strictly comply with the Animal Welfare Act (9 CFR 3), Department of the Air Force policies (DAFI 31-126 and DAFGM 2024-01), DoD Unified Facilities Criteria, and Anti-Terrorism/Force Protection standards. Interested partners must submit a Phase 1 Solution Brief, limited to five pages, by the response deadline of September 11, 2026. Submissions will be evaluated based on technical merit, the proposed schedule for design completion, and the company's experience with large-scale complex facilities. The government will use these briefs to determine which firms progress to Phase 2 pitch sessions.
FA8903 772 Ess Pk

POSTED

1 day ago

DEADLINE

in 7 days
NAICS: 541340
New
Federal
LIFE SAFETY DRAWINGS BLDG 26
Solicitation # 36C26226Q1038
Solicitation 36C26226Q1038 is a request for market research from the Department of Veterans Affairs to identify qualified Service-Disabled Veteran-Owned Small Businesses (SDVOSB) capable of providing life safety drawings and related services for Building 26 at the VA San Diego Healthcare System. The project involves an onsite evaluation of the 184,396 square foot facility to develop a Statement of Conditions and detailed life safety drawings. These deliverables must comply with the National Fire Protection Association (NFPA) 101 Life Safety Code and The Joint Commission's Physical Environment standards to prepare the facility for accreditation surveys. The contractor will be responsible for performing onsite evaluations, drafting CAD work, and producing a comprehensive set of drawings that include fire and smoke barriers, exit distances, occupancy types, and life safety devices. Required deliverables include digital files in PDF and AutoCAD formats, as well as six physical printed copies in specific sizes. The performance period is scheduled from September 9, 2026, to December 8, 2026, and requires the contractor to participate in daily coordination huddles with the Engineering Program Manager. Interested respondents must submit a capability statement and company qualifications to the Network Contract Office 22 in Gilbert, Arizona, by the deadline of July 10, 2026.
262-NETWORK Contract Office 22 (36C262)

POSTED

1 day ago

DEADLINE

in 3 days
NAICS: 541340
New
SLED
Design services for Trustman roof replacement
Solicitation # BD-27-1133-1133C-1133L-132937
The Brookline Housing Authority is seeking a qualified Architect to provide design and construction administration services for the full replacement of all flat roof assemblies at the three Trustman buildings, located at the Trustman Apartments 705-1 in Brookline, Massachusetts. Identified as Project 046137, the scope requires the selected designer to be qualified under M.G.L. Chapter 7C, Section 44. The project is scheduled for completion within 57 weeks from the date of the contract signing. The contract provides a set fee of 175,000 dollars for the designer, while the estimated construction costs for the roof replacements are 2,000,000 dollars. Proposals must be submitted via the designated portal by September 23, 2026, at 2:00 PM. Primary administration for the solicitation is handled by Sharon Cowan and Chris Devoll.
1133CONVD - Brookline Housing Authority

POSTED

2 days ago

DEADLINE

in 19 days
NAICS: 541340
New
Federal
Supply of Professional Wrestling Mats
DOD Education Activity

POSTED

2 days ago

DEADLINE

in 6 days
NAICS: 541340
New
SLED
PEN22-0215 Plot Plan for the Development of Pigeon Pass Car Wash
Solicitation # PEN22-0215
Project PEN22-0215 involves the development of a plot plan for the Pigeon Pass Carwash, located at APN 292-280-035 on the north side of Hemlock Avenue and the east side of Pigeon Pass Road in Moreno Valley, California. The scope of work includes the construction of the carwash facility along with associated parking, vacuum stalls, and landscaping. The project is managed by the City of Moreno Valley Community Development Department, with Alicia Ley listed as the applicant and Dijen Patel serving as the Associate Planner. The project is classified as a Class 32 In-Fill Development Project, granting it a categorical exemption from the California Environmental Quality Act under CEQA Guidelines Section 15332. To proceed, the development must remain consistent with all applicable General Plan designations, policies, and zoning regulations. Administrative documentation includes a Notice of Exemption filed on September 1, 2026, with associated filing fees paid to the California Department of Fish and Wildlife and Riverside County.
City of Moreno Valley

POSTED

3 days ago

DEADLINE

N/A
NAICS: 541340
New
SLED
Construction Scheduling Support (Critical Path Method (CPM) Scheduling Support) (CSS/CPM) services fThe Texas Department of Transportation is forecasting a procurement for Construction Scheduling Support, specifically Critical Path Method (CPM) Scheduling Support (CSS/CPM) services, to support the El Paso, Houston, and Waco districts. This opportunity is categorized under NAICS code 541340 and is expected to be advertised in September 2026. The procurement is managed by the El Paso District and is anticipated to result in four Indefinite Delivery (ID) contracts with a total estimated maximum value of 2,000,000 dollars. The selection process for this professional services contract is expected to be Non Federal without Interview (HUB). As this is part of the Fiscal Year 2027 projected contracts list for architectural, engineering, and surveying services, the details provided serve as a planning tool and are subject to change. Jaime Perales is listed as the procurement contact for this effort.
El Paso District

POSTED

3 days ago

DEADLINE

N/A
NAICS: 541340
New
SLED
RFQ-Designer Svs-Truro Facilities Evaluations
Solicitation # BD-25-1338-TOT02-TOT02-132945
The Town of Truro, Massachusetts, is soliciting bids under solicitation number BD-25-1338-TOT02-TOT02-132945 for professional designer services to conduct facility evaluations of town-owned properties. The primary objective of this engagement is to assess and determine both short-term and long-term maintenance requirements and space needs. A critical component of the evaluation process is the integration of the Town's decarbonization plan, which must serve as a guide for the designer's assessments. This solicitation was posted on August 31, 2026, with a response deadline of September 23, 2026, at 7:00 PM. The project is categorized under NAICS code 541340. Noelle Scoullar serves as the primary point of contact and purchaser for the contract, with all services to be performed at town facilities located in Truro, MA. While the solicitation specifies a quantity of one for the service, the total contract value and specific payment terms are not provided in the available documentation. Electronic quotes are not permitted for this procurement.
TOT02 - Town of Truro

POSTED

4 days ago

DEADLINE

in 19 days
NAICS: 541340
New
SLED
Lighting and Structural Design EngineeringThis subcontract opportunity with the East Baton Rouge City Parish Purchasing agency in Louisiana requires licensed electrical and structural engineering design services. The selected provider will be responsible for developing lighting systems and support structures for underpasses, ensuring all plans are stamped and signed by professional engineers licensed in the state of Louisiana. The project falls under NAICS code 541340. Interested parties must submit their responses by the deadline of October 13, 2026, at 8:00 PM. Further details and application processes are available through the Louisiana Department of Administration procurement portal.
East Baton Rouge City Parish Purchasing

POSTED

5 days ago

DEADLINE

in about 1 month

AI Contract Overview

Show more

The contract titled Quality Inspection and Source Acceptance Services requires the performance of source inspection at the manufacturer’s facility in accordance with the E06 clause to ensure full compliance with established quality, packaging, and marking standards. This includes a thorough review of all relevant documentation and active coordination with government representatives to validate adherence to regulatory and contractual requirements. The work is subcontracted under NAICS code 541340 and is managed by the Department of Defense through SPRMM1 DLA Mechanicsburg, with inspections to be conducted at the supplier’s premises wherever the goods are produced. The solicitation was posted on July 16, 2026, and proposals must be submitted no later than July 28, 2026, at 8:30 PM. The scope focuses exclusively on verification activities to support acceptance of delivered items, emphasizing technical accuracy, proper labeling, and documentation integrity as critical success factors.

General Info

Source inspection at manufacturer sites to verify quality, packaging, labeling, and documentation per E06 clause for DoD.

Agency

Department Of Defense → SPRMM1 DLA MechanicsburgView Agency

NAICS

541340 - Drafting ServicesView NAICS

Place of Performance

PA

Set-Aside

NONE

Documents

This scope was carved out of SPRMM126RMC71.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

PUMP UNIT,CENTRIFUG

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → SPRMM1 DLA Mechanicsburg
ContactsNo contacts available
OfficeN/A
Organization / Agency
Department Of Defense → SPRMM1 DLA Mechanicsburg
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Perform source inspection at the manufacturer’s facility per E06 clause to verify compliance with quality, packaging, and marking requirements, including documentation review and government coordination.

More opportunities from Department Of Defense → SPRMM1 DLA Mechanicsburg

Same awarding agency

NAICS: 333611
New
Federal
28 - Shroud Tailcone
Solicitation # MAAC-SPRMM1-2026-ZID3-030
This solicitation, numbered MAAC-SPRMM1-2026-ZID3-030, is for the procurement of Shroud Tailcone components under NAICS code 333611. Issued by the Department of Defense through DLA Mechanicsburg, the opportunity was posted on September 3, 2026, with a response deadline of October 9, 2026. Under FAR 16.5, this opportunity is restricted exclusively to Prime Vendor Awardees on the Maritime Acquisition Advancement Contract. Eligible bidders include Atlantic Diving Supply, Inc., ASRC Federal Facilities Logistics, LLC, Culmen International, LLC, S&K Aerospace, LLC, SupplyCore, LLC, and Fairwinds Technologies, LLC. Any access requests from non-Prime Vendors will be denied.
Turbine and Turbine Generator Set Units Manufacturing

POSTED

1 day ago

DEADLINE

in about 1 month
View Details
NAICS: 335931
New
Federal
POWER SUPPLY
Solicitation # SPRMM126QKH12
This solicitation is for the manufacture and procurement of a power supply, specifically identified by Cage Code 60132 and reference number 1001050-002. The contract is a total small business set-aside and will be awarded based on the Lowest Price Technically Acceptable criteria. Requirements include adherence to MIL-STD-130 for marking and MIL-STD 2073 for packaging. All invoices and receiving reports must be submitted electronically via PIEE-WAWF. Contractors must provide proof of authorization if proposing as a distributor, and refurbished materials are strictly prohibited. The agreement mandates a Cybersecurity Maturity Model Certification (CMMC) Level 1 self-assessment. Any changes to production facilities require written approval from the Contracting Officer and a price reduction of 250 dollars to cover administrative costs. Technical drawings are available via SAM.gov, and the government maintains the right to perform inspections to ensure compliance with all quality assurance standards.
Current-Carrying Wiring Device Manufacturing

POSTED

2 days ago

DEADLINE

in 28 days
View Details
NAICS: 332919
New
Federal
VALVE,SAFETY RELIEF
Solicitation # SPRMM126QGF31
This contract pertains to the procurement of a SAFETY RELIEF VALVE under solicitation SPRMM126QGF31, issued by the Defense Logistics Agency (DLA) Mechanicsburg, with a response deadline of August 17, 2026. The requirement is governed by strict technical and quality standards, including compliance with MIL-DTL-901 for shock testing if new casting suppliers are used, and adherence to MIL-STD-130 Rev N for part marking. The contractor must supply the item under specified Cage Codes and Reference Numbers, with any design, material, or part number changes requiring prior written approval from the NAVICP-MECH Contracting Officer and classification under one of six defined change codes. Inspection and acceptance are to occur at the source, with the contractor responsible for all quality assurance processes, including maintaining inspection records for 365 days after final delivery. Packaging must conform to MIL-STD-2073, and the item is subject to the mandatory use of the Wide Area Workflow (WAWF) system for electronic invoice and receiving report submission. Only authorized distributors of the original equipment manufacturer are eligible for award, requiring proof of authorization submitted with the offer. The procurement follows the Lowest Price Technically Acceptable (LPTA) evaluation method and is exempted by military service. The contract mandates compliance with numerous Department of Defense directives, including security prohibitions, small business program representations, and mandatory use of Workflow Pro for assist modules. Technical data is not provided, and all applicable documents must be obtained directly by the contractor from official DOD sources. Contractors must register for the Procurement Integrated Enterprise Environment (PIEE) and Electronic Data Access (EDA) to monitor contract actions and submit orders electronically. Delivery times are unspecified, and offers must include clear contact information, OEM details if not the manufacturer, and notification preferences for procurement updates. No drawings or technical specifications are furnished by the government, placing full responsibility on the contractor to meet all performance and compliance standards as outlined in referenced military specifications. All contractual documents are deemed issued upon electronic transmission, and any post-award changes are subject to administrative cost deductions.
Other Metal Valve and Pipe Fitting Manufacturing

POSTED

2 days ago

DEADLINE

in 27 days
View Details
NAICS: 333415
New
Federal
HEAT INTERCHANGER,R
Solicitation # SPRMM126QMJ14
This solicitation is for the manufacture and procurement of a Heat Interchanger, R, under the authority of DLA Mechanicsburg. The contract is a total small business set-aside and will be awarded based on the Lowest Price Technically Acceptable criteria. Key requirements include adherence to MIL-STD-130 for marking and MIL-STD 2073 for packaging. Contractors must use the Wide Area Workflow (WAWF) for electronic submission of invoices and receiving reports and are required to identify the Original Equipment Manufacturer and CAGE code if they are not the manufacturer. The agreement mandates strict quality assurance, requiring contractors to maintain inspection records for 365 days following final delivery. Any changes to production facilities must be approved in writing by the Contracting Officer and typically require a price reduction of 250 dollars to cover administrative costs. The contract also includes specific provisions for the Buy American Act, Free Trade Agreements, and security prohibitions. Authorized distributors must provide proof of authorization on company letterhead to be considered for the award.
Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

2 days ago

DEADLINE

in 12 days
View Details
NAICS: 333415
New
Federal
HEAT INTERCHANGER,R
Solicitation # SPRMM126QMJ13
This solicitation from the Department of Defense, issued by DLA Mechanicsburg, seeks the manufacture of a Heat Interchanger (Cage 38450, ref. no. CSM-80-5806C007E). The contract is a total small business set-aside and will be awarded based on the Lowest Price Technically Acceptable criteria. Key requirements include adherence to MIL-STD-130 for marking and MIL-STD 2073 for packaging. Contractors must provide the Original Equipment Manufacturer's CAGE code and part number if they are not the manufacturer, and authorized distributors must provide proof of authorization on company letterhead. The agreement mandates the use of the Wide Area Workflow (WAWF) for electronic submission of invoices and receiving reports. Inspection and acceptance are generally conducted at the source, and any changes to production facilities require written approval from the Contracting Officer, potentially involving an administrative fee. The contract also incorporates various federal regulations, including the Buy American Act and specific security prohibitions. All contractual documents are considered issued upon electronic transmission, and the contractor is responsible for maintaining inspection records for 365 days following final delivery.
Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

2 days ago

DEADLINE

in 12 days
View Details
NAICS: 334412
New
Federal
MONOPLUSE COMBINER
Solicitation # SPRMM126QHC71
This solicitation is for the manufacture and procurement of the Monopluse Combiner under a firm-fixed-price contract using Lowest Priced Technically Acceptable evaluation criteria. Issued under FAR Part 18 emergency acquisition flexibilities, the requirement specifies that items must be physically identified according to MIL-STD-130 and meet ISO 9001 quality system standards. The contract mandates the use of the Wide Area Workflow (WAWF) for electronic submission of combined invoice and receiving reports and requires that any non-manufacturer offerors identify the original equipment manufacturer and their CAGE code. Key operational requirements include strict adherence to production facility locations, with any changes requiring written approval and a fee to cover administrative costs. Quality assurance is the primary responsibility of the contractor, who must maintain inspection records for 365 days following final delivery. The solicitation also emphasizes that only authorized distributors of the original manufacturer will be considered for award, requiring proof of authorization on company letterhead. All contractual documents are considered issued upon electronic transmission, and the government reserves the right to perform inspections to ensure compliance with all specified requirements.
Bare Printed Circuit Board Manufacturing

POSTED

2 days ago

DEADLINE

in about 2 months
View Details
NAICS: 332991
New
Federal
31--CB ROTATING ASSY
Solicitation # sprmm126qkg47
The contract is for the sole-source procurement of 16 units of the CB ROTATING ASSY (NSN 1H-3120-014828716, P/N 4D09668-004) from Northrop Grumman Systems Corporation (CAGE 90099), the only approved source of supply, as determined by market research showing it is uneconomical to acquire technical data rights or reverse engineer the part. The acquisition is conducted under FAR 6.302-1, with no competition planned, although responsible sources may submit capability statements within 45 days of the presolicitation notice for the government’s consideration. The item is not being acquired under FAR Part 12 despite commercial item inquiries, indicating non-commercial technical specifications apply. Deliveries are to be split between two DLA distribution centers: W25G1U in New Cumberland, PA, and W62G2T in Tracy, CA. Packaging, preservation, and marking must comply with applicable military standards such as MIL-STD-129 and MIL-STD-2073, though exact details are to be obtained from DODSSP or ASSIST-Online. The government will conduct inspection and acceptance, with FOB Origin and origin-based inspection under consideration, and no formal COR or COTR is identified, with Jennifer Elliott of DLA Mechanicsburg serving as the primary point of contact. The solicitation, SPRMM126QKG47, is a small business set-aside with no specific contract type listed, and vendors are requested to indicate their ability to provide cost or pricing data, commercial warranties, and willingness to accept up to four option years. All responses must be submitted electronically by September 21, 2026, to the specified email, with PDF being the preferred format, and no formal contract clauses or line-item pricing details are provided in the documentation.
Ball and Roller Bearing Manufacturing

POSTED

2 days ago

DEADLINE

in about 2 months
View Details
NAICS: 334412
New
Federal
CIRCUIT CARD ASSEMB
Solicitation # SPRMM126QGE94
This solicitation, issued by DLA Mechanicsburg, seeks the manufacture and supply of a circuit card assembly. The contract requires strict adherence to specific cage codes and reference numbers, and it prohibits the use of refurbished materials. All items must be physically identified according to MIL-STD-130, and packaging must comply with MIL-STD 2073. Contractors are required to use the PIEE-WAWF system for electronic submission of invoices and receiving reports. The agreement mandates that any change in production facilities must be approved in writing by the Contracting Officer and typically requires a price reduction of 250 dollars to cover administrative costs. Quality assurance is the primary responsibility of the contractor, who must maintain inspection records for 365 days following final delivery. Authorized distributors must provide proof of their status on company letterhead to be considered for award. All contractual documents are considered issued when sent via mail, fax, or electronic means.
Bare Printed Circuit Board Manufacturing

POSTED

2 days ago

DEADLINE

in 28 days
View Details
NAICS: 333998
New
Federal
RDCF TOUCHSCREEN 48
Solicitation # SPRMM126QGE83
This solicitation is a total small business set-aside for the manufacture of the RDCF TOUCHSCREEN 48, identified by Cage Code 1SNT7 and part number OIP-19MA3002. The procurement is managed by the Defense Logistics Agency (DLA) Mechanicsburg and requires strict adherence to technical specifications, including physical identification per MIL-STD-130 and packaging in accordance with MIL-STD 2073. Contractors are responsible for all inspection requirements, and any changes to design, material, or part numbers must receive prior written approval from the NAVICP-MECH Contracting Officer. Interested vendors must be authorized distributors if they are not the Original Equipment Manufacturer (OEM), and refurbished material is strictly prohibited. All invoicing and receiving reports must be submitted electronically through the Wide Area Workflow (WAWF) via the Procurement Integrated Enterprise Environment (PIEE). The contract includes specific provisions regarding security prohibitions, Buy American requirements, and priority ratings for national defense and emergency preparedness. Additionally, any changes to production facilities require formal written requests and may be subject to administrative cost deductions.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

2 days ago

DEADLINE

in 28 days
View Details
NAICS: 334416
New
Federal
TRANSFORMER, PSRL
Solicitation # SPRMM126QMJ09
This solicitation from DLA Mechanicsburg is for the manufacture and supply of a PSRL Transformer, specifically referencing Cage Code 3J458 and part number 102869. The contract will be awarded based on the Lowest Price Technically Acceptable criteria. Key requirements include adherence to ISO 9001 quality systems, MIL-STD-129 marking, and MIL-STD-2073 packaging. A critical mandate is the strict prohibition of metallic mercury and mercury contamination, as the item is intended for use on submarines or surface ships. Contractors must submit invoices and receiving reports electronically via PIEE-WAWF. If the bidder is not the original equipment manufacturer, they must identify the OEM's CAGE code and part number. Any changes to production facilities require written approval from the Contracting Officer and a price reduction of 250 dollars to cover administrative costs. The solicitation is managed by the Department of Defense under NAICS code 334416, with specific cybersecurity and supply chain security prohibitions in effect.
Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

2 days ago

DEADLINE

in 28 days
View Details
NAICS: 333998
New
Federal
CABLE ASSEMBLY AB
Solicitation # SPRMM126QKE02
This contract solicits the manufacture of multiple cable assemblies including CABLE ASSEMBLY AB, CABLE TC9007-2, CABLE,TEST TC71, CABLE TEST TC72, CABLE TEST TC62, and related variants, all governed by detailed technical drawings and military standards. The items are designated for use in submarine and surface ship systems and must comply with strict performance, marking, and configuration control requirements outlined in MIL-STD-973 and MIL-STD-129, including physical identification, engineering change procedures, and documentation submission protocols. Contractors must adhere to ISO 9001 quality system requirements and ensure zero metallic mercury content in all materials, with any exception requiring prior written approval and a warning plate indicating mercury use. Inspection responsibilities rest with the contractor, though the government retains the right to conduct inspections, and all items must be delivered with proper packaging per MIL-STD-2073. All quotations must be submitted electronically through PIEE-WAWF, with invoice and receiving report data submitted as a combined file, and contractors are required to register for the Electronic Data Access portal to monitor contract actions. The solicitation is a total small business set-aside, and offerors must submit full small business representations and certify compliance with applicable federal regulations. The primary point of contact is Matthew Cracker at DLA Mechanicsburg, and technical data including controlled drawings must be accessed via SAM.gov by authorized data custodians listed on DD2345 forms. The response deadline has been extended to July 10, 2026, and award will be based on trade-off evaluation where price is the predominant factor over past performance. Contractors must disclose OEM information if acting as a distributor and provide a valid email for communication. Production facility changes are prohibited without written approval and require a $250 administrative cost reduction. All contractual documents are deemed issued upon electronic transmission, and failure to comply with any requirement may result in rejection of the offer or subsequent non-compliance penalties.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

2 days ago

DEADLINE

in 7 days
View Details
NAICS: 334514
New
Federal
INDICATOR,LIQUID QU
Solicitation # SPRMM126QKH49
This solicitation, issued by DLA Mechanicsburg under emergency acquisition authority, seeks the manufacture and supply of specific components, including a module indicator, an electrical control panel, and a liquid quantity indicator. The contract utilizes Lowest Price Technically Acceptable criteria for award evaluations and requires strict adherence to MIL-STD-130 for marking and MIL-STD-2073 for packaging. A critical requirement for all supplied materials is that they must be mercury-free to prevent contamination and corrosion on submarines and surface ships. Contractors must utilize the PIEE-WAWF system for electronic submission of invoices and receiving reports and must maintain CMMC Level 1 cybersecurity certification. If the offeror is not the original equipment manufacturer, they must provide proof of authorized distributorship and identify the OEM. All substitutions in design or part numbers require written approval from the contracting officer, except for simple part number changes. Inspection and acceptance are generally conducted at the source, and all quality assurance records must be maintained for 365 days following final delivery.
Totalizing Fluid Meter and Counting Device Manufacturing

POSTED

2 days ago

DEADLINE

in 28 days
View Details