Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

This Sources Sought opportunity from Department Of Defense was posted on August 15, 2025. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Rail Inspection Support Services

Closed
N4523A26Q0901Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 811310
New
Kubota M8200 Clutch Replacement
Solicitation # kubota-m8200-clutch-replacement
Management & Training Corporation is soliciting lump sum bids for the clutch replacement of a Kubota M8200 tractor with front wheel assist, located at the Earle C. Clements Job Corps Center in Morganfield, Kentucky. The scope of work requires the contractor to provide all labor, transportation, tools, and materials to diagnose and repair the clutch assembly and power take-off system. Key technical requirements include replacing friction discs, bearings, oil seals, and O-rings, as well as resurfacing the flywheel and replacing hydraulic pipes and filters as necessary. All work must be performed according to manufacturer specifications and verified through operational testing under load before final acceptance by the Facility Maintenance Department. This solicitation is set aside for small businesses, including VOSB, SDVOSB, WOSB, and HUBZone certified firms, under NAICS code 811310. Interested bidders must submit a bid sheet, completed supplier packet (including W-9 and self-certification), and proof of insurance to Angie Mahoney by November 3, 2026, at 3:00 PM CST. Award will be based on best value. The contract incorporates various Federal Acquisition Regulation clauses, including requirements for combating trafficking in persons, Buy American compliance, and adherence to Service Contract Act wage determinations for Kentucky. Final deliverables must include a summary of diagnostic findings, an itemized list of parts and services, and applicable warranty documentation.
Earle C. Clements Job Corps Center

POSTED

about 3 hours ago

DEADLINE

in 7 days
NAICS: 811310
New
SLED
Elevators and Chairs Lifts Inspection Maintenance & Repair
Solicitation # 2027-IFB-059
The Charleston County School District is soliciting bids under solicitation 2027-IFB-059 for the inspection, maintenance, and repair of 78 elevators and chair lifts. The contract establishes a base term of one year with options to renew for up to four additional one-year periods, for a maximum total of five years. The scope of work requires a comprehensive preventative maintenance program including quarterly service, lubrication, testing, and cleaning, as well as emergency repair capabilities to ensure a safe operational environment. All work must adhere to ANSI standards and the South Carolina Elevator Code and Regulations. Deliverables include detailed safety inspection reports with photographs and a formal preventative maintenance plan. The contract will be awarded based on Best Value, evaluating cost, bidder responsibility, and qualifications, including a mandatory evaluation committee review and vendor presentation. Bids must be submitted via the CCSD Procurement Portal by 2:00 pm on October 22, 2026. Key requirements for offerors include providing a history of similar experience, certifying no organizational conflicts of interest, and maintaining Commercial General Liability insurance. Pricing is based on firm rates for normal and non-normal business hours, as well as specific test charges, while markups on parts are not considered an evaluation factor. The agreement is governed by South Carolina law and includes compliance with the Davis-Bacon Act and Equal Employment Opportunity regulations.
Facilities Management

POSTED

about 13 hours ago

DEADLINE

in about 9 hours
NAICS: 811310
New
SLED
ANNUAL ROTATING EQUIPMENT INSPECTION, TESTING, REPAIR, RECONDITIONING AND STORAGE SERVICES
Solicitation # 2026-RFP-130
Lakeland Electric is soliciting proposals under RFP 2026-RFP-130 to establish a pool of qualified contractors for the annual inspection, testing, repair, reconditioning, and storage of critical rotating equipment at the McIntosh and Larsen Power Plants. The scope of work covers a wide range of assets, including low- and medium-voltage AC/DC electric motors and circulating water and condensate pumps. Required services include clean inspection tests, troubleshooting, motor rewinding, dynamic field balancing, laser alignment, and vibration analysis. Additionally, the selected contractors must provide logistics support, including pickup, delivery, and secure indoor storage with ongoing preservation activities such as shaft rotation and lubrication. Proposals are due by 3:00 pm on October 30, 2026, via the OpenGov portal. Award decisions will be based on a 100-point scoring system evaluating pricing (30%), qualifications and experience (25%), technical and facility capabilities (25%), service approach and response (15%), and past performance (5%). Mandatory submittals include a signed W-9, Florida Sunbiz registration, a notarized Hold Harmless Indemnification Agreement, and a Human Trafficking Affidavit. Contractors must adhere to strict safety standards, including OSHA regulations for crane operations and powered industrial trucks, and must certify compliance with drug-free workplace and suspension and debarment regulations.
LE - Production - MPP

POSTED

about 17 hours ago

DEADLINE

in 2 days

General Info

NAICS

811310 - Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

Place of Performance

Silverdale, WA, 98315, USA

Set-Aside

NONE

Documents

1

Rail Alignment Survey Performance Work Statement

PDF, High priority: read this firstsow
High

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseClosed
Posted

Sources Sought

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Puget Sound Naval Shipyard IMF
Contacts2 people available
OfficeBREMERTON, WA, 98314-5001, USA
Office AddressBREMERTON, WA, 98314-5001, USA
Contacts
Christopher Cooper
Andrew Skelley

Full Description

Show more
THIS IS A SOURCES SOUGHT NOTICE. THIS NOTICE IS ISSUED FOR MARKET RESEARCH PURPOSES ONLY. THIS IS NOT A SOLICITATION OR INVITATION FOR OFFERORS TO SUBMIT PROPOSALS. A SYNOPSIS OF PROPOSED CONTRACT ACTION WILL BE POSTED AT A LATER DATE WHICH WILL PROVIDE INSTRUCTIONS FOR OFFERORS TO RESPOND TO THIS OPPORTUNITY. The Puget Sound Naval Shipyard & Intermediate Maintenance Facility (PSNS&IMF), Contracting Department (Code 400), is issuing this sources sought notice. The sources sought is being issued as a means of conducting market research to determine the interest and capability of Industry to provide labor to construct new storage rack system and anchor to concrete pads (racks provided by customer) as defined in this Performance Work Statement except for those items specified as government furnished property and services. The contractor shall perform to the standards in this contract.The contractor shall provide all personnel, equipment, supplies, facilities, transportation, tools, materials, supervision, and other items and non-personal services necessary. The tentative North American Industry Classification System (NAICS) code selected for this acquisition 811310, Commerical and Industrial Machinery and Equipment. To be considered an interested vendor, you must possess this NAICS code in your System for Award Management (SAM) registration. Interested offerors must be registered in SAM at www.sam.gov. Based on the responses to this sources sought notice, this requirement may be set-aside for small business (in full or in part) procured through full and open competition (unrestricted), or procured on a sole source basis. All small business set-aside categories will be considered. Telephonic inquiries will not be accepted or acknowledged, the government will not be providing evaluations or comments to companies providing sources sought responses but the responses will be used to inform the government as to the best means of procuring this requirement. FURTHER SPECIFICATIONS AND DETAILS WILL BE PROVIDED IN THE REQUEST FOR PROPOSAL (RFP) SUBMISSION REQUIREMENTS: Interested parties are requested to respond with a capabilities statement indicating compitence to complete the work specified in the attached Performance Work Statement (PWS). The email subject line should be - Sources Sought Response for N4523A26Q0901. If your organization has the potential capacity and capabilities to perform these contract requirements, please provide the following information: Organization Name and CAGE code. The response to the sources sought may be in either Microsoft Word, Portable Document Format (PDF), or in the body of the email and shall be addressed to Christopher Cooper at contact@example.gov and Andrew Skelley at contact@example.gov. Submissions must be received via email no later than 12:00 PM Pacific Standard Time on 20 August, 2025. Questions or comments regarding this notice may be forwarded to Christopher Cooper at contact@example.gov and Andrew Skelley at contact@example.gov. Responses, questions, or comments should be provided via EMAIL ONLY. No information regarding this posting will be disseminated via phone.

More opportunities from Department Of Defense → Puget Sound Naval Shipyard IMF

Same awarding agency

NAICS: 336611
New
Federal
Maintenance, Repair, and Preservation of YT-812
Solicitation # N4523A27Q1003
The Puget Sound Naval Shipyard and Intermediate Maintenance Facility is conducting market research to identify capable industry sources for the maintenance, repair, and preservation of the YT-812, a 90-foot steel-hulled medium yard tug. The anticipated period of performance is from July 2027 through September 2027. To ensure proper government oversight, the work must be performed at a contractor facility located within the Puget Sound, Washington region, specifically between Olympia and Bellingham. The comprehensive scope of work includes docking and undocking the vessel, performing ultrasonic and visual inspections of the hull and decks, and executing extensive blasting and preservation of the underwater hull, freeboard, and non-skid surfaces. Technical requirements involve repairing hull and winch valves, modifying winch control and air piping, installing an automatic voltage regulator, and performing interval inspections and repairs on Schottel Z-drive units and twin disc transmission coolers. The contractor must adhere to strict quality standards, including ANSI/AWS D1.1/D1.2 welding standards and MIL-PRF specifications for coatings. Interested respondents must submit a notice of interest by November 3, 2026, detailing their business size under NAICS code 336611, past performance, and technical capabilities. The government is specifically looking for firms with a satisfactory performance record and a current Agreement for Boat Repair or Master Ship Repair Agreement issued by NAVSEA. This sources sought notice is for planning purposes only and does not constitute a formal request for quotations.
Ship Building and Repairing

POSTED

about 21 hours ago

DEADLINE

in 6 days
View Details
NAICS: 333912
New
Federal
Portable Special-Purpose High-Purity Nitrogen Generation Systems
Solicitation # N4523A27RFI0801
The Puget Sound Naval Shipyard and Intermediate Maintenance Facility is conducting market research via Request for Information N4523A27RFI0801 to acquire portable, special-purpose high-purity nitrogen generation systems. The government is seeking a ruggedized, turn-key solution housed within a single ISO 668 Type 1C 20-foot heavy-duty intermodal shipping container that is weather-sealed and salt-air corrosion resistant. Technical requirements specify the system must produce nitrogen with oxygen purity levels below 50 ppm, deliver pressures up to 4,500 psig, and feature a dual-mode feed air architecture, a high-pack booster compressor, and an automated supply manifold. The system must be capable of 180 days of continuous operation without scheduled servicing and 7-day autonomous operation in an unmanned outdoor shipyard environment. The contemplated acquisition strategy is an Indefinite Delivery/Indefinite Quantity (IDIQ) contract utilizing streamlined commercial procedures under FAR Part 12 and FAR Part 15. The government intends to procure two initial First Article Test units for qualification and NRTL inspection, followed by up to ten production units ordered via firm-fixed-price delivery orders. The scope includes on-site turnkey delivery, commissioning, operational verification at the Bremerton, Washington facility, 24 months of spare consumable parts, and optional multi-year maintenance agreements. Source selection is expected to be based on Best Value with Tradeoffs or Lowest Price Technically Acceptable, evaluating technical capability, reliability, delivery schedules, and past performance.
Air and Gas Compressor Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 3 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS