Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

This Government Contract opportunity from Department Of Defense was posted on February 14, 2018. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

REFUSE AND RECYCLING BRIDGE SOLE SOURCE

Awarded
W911SD-18-P-0029Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 562111
New
SLED
2027 FAYETTE COUNTY TRANSFER STATION WASTE HAULING AND DISPOSAL CONTRACT
Solicitation # 49500
The 2027 Fayette County Transfer Station Waste Hauling and Disposal Contract, issued by the Fayette County Engineer in Ohio, requires a contractor to provide all labor, materials, and equipment for the removal, transportation, and disposal of waste from the transfer station located at 1580 Robinson Road, Washington C.H., Ohio. The contract period begins on December 21, 2026, and concludes on December 19, 2027, with provisions for successive automatic one-year extensions. The engineer's estimate for the project is $650,000 per year, and the contract will be awarded to the lowest qualified, responsible, and responsive bidder. Bidders may provide a standard one-year proposal or an alternate three-year proposal based on 16,000 tons per year. Technical requirements mandate that the contractor dedicate four trailers with a minimum capacity of 100 cubic yards and 45 to 48 feet in length, ensuring three trailers remain on site at all times. A shuttle vehicle must be provided, and the contractor must deliver an additional empty trailer within 1.5 hours of notification, or face liquidated damages of $300 per hour. Required securities include a bid guaranty of $65,000 and a 100 percent payment and performance bond of $650,000. Comprehensive insurance is required, including automobile liability with $2.5 million per person/occurrence and $2.25 million for property damage, alongside workers compensation and general liability coverage. Compliance documentation must include a W-9, non-collusion affidavit, and a delinquent personal property tax affidavit.
Fayette County Engineer

POSTED

about 14 hours ago

DEADLINE

in 4 days
NAICS: 562111
New
SLED
Bid 8863 Refuse Services-Various Locations
Solicitation # BID-2026-0007
The Board of Public Education of the School District of Pittsburgh is soliciting bids under solicitation number BID-2026-0007 for the removal of rubbish at various locations across the district. The contract spans a three-year period from January 1, 2027, to December 31, 2029, with the possibility of a six-month extension to prevent coverage lapses. The scope of work includes scheduled pickups for various container sizes, including 2, 4, and 6-yard containers, bushel hampers, and 96-gallon totes, as well as on-demand services for specific sites like Cupples Stadium. All services must comply with City Ordinance 601.04, which restricts collection in residential zones between 10:00 P.M. and 6:00 A.M. during daylight saving time. Bids will be evaluated based on the total annual cost, calculated by multiplying the weekly pickup frequency per container size by the individual pickup cost over 52 weeks. The award will be granted as a group for items 1 through 5 to a single company. Contractors must maintain specific insurance coverage, including 300,000 dollars for personal liability and 250,000 dollars per occurrence for property damage. Additionally, the selected vendor must adhere to the district's substance abuse policy, provide regulatory documentation for landfill and recycling sites, and certify that they are not debarred or suspended from federal transactions. Invoicing requires each pickup location to be assigned a unique location number with only one location per invoice.
Pittsburgh Public School District

POSTED

about 16 hours ago

DEADLINE

in 26 days
NAICS: 562111
New
SLED
LVCC-Refuse Disposal Services to include Compactor Dumpster with Integrated Hydraulic Cart Tipper (Lifter)
Solicitation # BPM095854
Solicitation BPM095854 is a request for refuse disposal services for the Lawrenceville Correctional Center in Lawrenceville, Virginia. The contractor is required to provide a 34 cubic yard metal compactor dumpster with an integrated hydraulic cart tipper on a rental basis, including all necessary installation of electrical and hydraulic hardware. Services include hauling and disposing of refuse at a Commonwealth of Virginia approved sanitary landfill, with containers to be emptied on an on-call basis within 24 hours of notice. The contract is awarded on a grand total basis to the lowest responsive and responsible bidder, with tiered award priority given to DSBSD-certified micro businesses for bids up to 10,000 dollars and small businesses for bids up to 100,000 dollars. Key requirements include mandatory registration in the eVA portal and adherence to strict delivery timelines, with a desired delivery of 10 calendar days after receipt of award. Contractors must maintain valid insurance authorized by the Virginia State Corporation Commission and ensure all personnel undergo background checks and fingerprinting. Payment is processed 30 days after the receipt of goods or a valid invoice. The contractor is responsible for removing all installation debris and repairing any site damages at their own expense. Bids must be submitted as firm unit prices, and the final acceptance of work is contingent upon a demonstration that the equipment is fully operational and compliant with all specifications and codes.
Lawrenceville Correctional Center

POSTED

about 19 hours ago

DEADLINE

in 8 days

General Info

NAICS

562111 - Solid Waste Collection

Place of Performance

USAG WEST POINT, WEST POINT, NY, 10996, USA

Set-Aside

NONE

Documents

1

J&A for Refuse and Recycling Collection Services - USAG West Point

PDF, Low priorityjustification-and-authorization
Low

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

2 updates
PhaseAwarded
Posted

Sources Sought

Notice updated

The notice description changed.

Justification (J&A)

Justification & Approval published

Awarded

Contract was awarded

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → W6QM Micc-West Point
Contacts1 person available
OfficeWEST POINT, NY, 10996-1514, USA
Office AddressWEST POINT, NY, 10996-1514, USA
Contacts
David L. AriostoCONTRACT SPECIALIST

Full Description

Show more
SOURCES SOUGHT SYNOPSIS W911SD-18-P-0029 REFUSE AND RECYCLING AT WEST POINT THIS IS A Sources Sought Notice ONLY. The U.S. Government currently intends to award a BRIDGE contract for REFUSE AND RECYCLING SERVICES on an SOLE SOURCE basis, but is seeking vendors that may be able to perform this requirement in order to support a competitive procurement. Accordingly, the U.S. Government highly encourages all interested businesses (large and small) to respond to this sources sought synopsis. In addition, small businesses, in all socioeconomic categories (including, 8(a) Business Development Program, Small Disadvantage Business, Historically Underutilized Business Zone, Service-Disabled Veteran-Owned, Women-Owned Small Business concerns), must describe their identifying capabilities in meeting the requirements at a fair market price, i.e., information which may help support a set-aside. The proposed sole source Firm Fixed Price contract to Donato Marangi Inc. is for refuse and recycling collection at the United States Army Garrison, West Point. This will be for a period of time up to 60 days from the date of award. This will only be issued if the current solicitation W911SD-17-R-0008 is not awarded in sufficient time to continue the refuse and recycling operations at West Point on 1 February 2018. A solicitation #W911SD-17-R-0008 for a Base Plus 4 Option Year period contract for refuse and recycling has been issued for this requirement and will close on 12 January 2018 and an award is expected to be made with an effective start date of 1 February 2018. If a resultant award will be issued from W911SD-17-R-0008 and it will be in effect on 1 February, then no further Sole Source Awards will be required. The statutory authority for the sole source procurement is e.g., 10 United States Code 2304(c)(1) as implemented in Federal Acquisition Regulation 6.302-1(a)(2)(iii), Only One Responsible Source and No Other Supplies or Services Will Satisfy Agency Requirements. Attached are the draft Performance Work Statement (PWS), Performance Requirements Summary (PRS) and Technical Exhibits with workload data (for services). This notice does not constitute a Request for Quote (RFQ)/Invitation for Bid (IFB)/Request for Proposal (RFP) or a promise to issue an RFQ, IFB or RFP in the future. This notice does not commit the U.S. Government to contract for any supply or service. Further, the U.S. Government is not seeking quotes, bids or proposals at this time and will not accept unsolicited proposals in response to this sources sought notice. The U.S. Government will not pay for any information or administrative costs incurred in response to this notice. Submittals will not be returned to the responder. A determination not to compete this requirement, based upon responses to this notice, is solely within the discretion of the Government. However, if a competitive solicitation is released, it will be synopsized on the Governmentwide Point of Entry. It is the responsibility of potential offerors to monitor the Governmentwide Point of Entry for additional information pertaining to this requirement. The NAICS code(s) is/are: 562111 Solid Waste Collection, $38.5 Million size standard. In response to this sources sought, please provide: 1. Identify any condition or action that may be having the effect of unnecessarily restricting competition with respect to this acquisition and identify alternatives or solution solutions. Also contact the MICC Advocate for Competition, Scott Kukes, at contact@example.gov or +1 (555) 000-0000, if you believe that this action is unreasonably restricting competition. Include the subject of the acquisition, this announcement, and the MICC POC information from the Sources Sought Synopsis. Provide the specific aspects that unreasonably restrict competition and the rationale for such conclusion. 2. Name of the firm, point of contact, phone number, email address, DUNS number, CAGE code, identify business size (large business or a small business), and if applicable, a statement regarding small business status (including small business type(s)/certifications(s) such as SDB, 8(a), HUBZone, SDVOSB, WOSB, etc.) and the corresponding NAICS code. 3. Identify whether your firm is interested in competing for this requirement as a prime contractor or not. Identify subcontracting, joint ventures or teaming arrangement that will be pursued, if any. 4. Information in sufficient detail regarding previous experience (indicate whether as a prime contractor or subcontractor) on similar requirements (include size, scope, complexity, timeframe, government or commercial), pertinent certifications, etc., that will facilitate making a capability determination. [Tailor the information requested to the requirement, e.g. lead time for implementation, proposed solution, alternative solution, security clearances, bonding requirements, etc., as applicable.] 5. Information to help determine if the requirement (item or service) is commercially available, including pricing information, basis for the pricing information (e.g., market pricing, catalog pricing), delivery schedules, customary terms and conditions, warranties, etc. 6. Identify how the Army can best structure these contract requirements to facilitate competition, including competition among small business concerns. 7. Recommendations to improve the Army's approach/specifications/draft PWS/PRS to acquiring the identified items/services. 8. Please include the number W911SD-18-P-0029 in your email response to preclude your reply being treated as JUNK or SPAM.

More opportunities from Department Of Defense → W6QM Micc-West Point

Same awarding agency

NAICS: 315210
New
Federal
SOLICITATION - U.S. Army West Point India White Coats, Trousers, Dresses
Solicitation # W911SD-26-Q-A114
The Mission and Installation Contracting Command West Point is soliciting quotes for a multi-year, firm-fixed-price contract to manufacture India White coats, trousers, and skirts for male and female cadets at the United States Military Academy. This procurement is a 100 percent set-aside for total small business concerns under NAICS code 315210. The contract features an ordering period from November 1, 2026, through October 31, 2033, with an initial delivery estimated for May 2027. A unique material sourcing arrangement is in place where the government provides all fabric and associated materials as government furnished items during the base year, while the contractor becomes solely responsible for sourcing all materials during the option years. The award will be based on the lowest price source selection, provided the offeror passes a technical evaluation of required samples for each garment type. All quotes must be submitted electronically via email to the designated point of contact by November 16, 2026, at 2:00 PM EST, which is also the strict deadline for the receipt of physical samples. Technical requirements are governed by specific product descriptions and military standards, including mandatory first article testing for the base year's first delivery order. Invoicing and payment will be processed electronically through the Wide Area WorkFlow system.
Cut and Sew Apparel Contractors

POSTED

3 days ago

DEADLINE

in 18 days
View Details
NAICS: 332215
New
Federal
SOLICITATION Cadet Swords USMA West Point
Solicitation # W911SD-27-Q-A002
The Mission and Installation Contracting Command Installation Contracting Office at West Point, NY, is soliciting quotes for the manufacture and delivery of Cadet Sabers, including scabbards and covers, for graduating cadets of the United States Military Academy. This requirement is a 100 percent set aside for total small business concerns under NAICS code 332215. The procurement is structured as a firm fixed price contract consisting of a base year for approximately 1,700 sabers and two subsequent option periods. The base period delivery date is firmly set for April 12, 2027, with subsequent years ending on December 4. Technical requirements are governed by Purchase Description WP-PD-26-02 and specific design diagrams, requiring materials such as stainless steel and gold plating per MIL-DTL-45204, with covers in West Point Gray (Pantone Cool Gray 5 C). Award will be based on a lowest price source selection process where technical compliance is evaluated on a pass/fail basis. To be considered, offerors must submit one complete sample sword assembly and a two-yard fabric sample by the firm closing date of October 30, 2026. Final acceptance is subject to first article inspection and conformance sampling per ASQ/ANSI Z1.4 at West Point, NY. All items must include unique item identification in accordance with MIL-STD-130 and MIL-STD-129.
Metal Kitchen Cookware, Utensil, Cutlery, and Flatware (except Precious) Manufacturing

POSTED

3 days ago

DEADLINE

in 1 day
View Details
NAICS: 315990
New
Federal
SOURCES SOUGHT-U.S. Army United States Military Academy (USMA), Cadet Issued Breast and Waist Plates
Solicitation # W911SD-27-Q-A009
The U.S. Army is issuing a Sources Sought notice for the procurement of Cadet Issued Breast and Waist Plates for the United States Military Academy at West Point. This is an information and planning effort to determine if there are at least two qualified small businesses capable of fulfilling the requirement to support a small business set-aside. The anticipated contract structure consists of a base year plus four one-year option periods under NAICS code 315990 for Apparel Accessories and Other Apparel Manufacturing. The technical requirements specify that both the breastplates and waistplates must be manufactured from Yellow Brass 65/35 (UNS Alloy C-268) with mirror-like polished fronts and matte finish backs and edges. These items must adhere to MIL-B-1563, MIL-DTL-1563/12B for waistplates, and MIL-DTL-1563/13B for breastplates. Specific dimensions and thicknesses are required, and identification markings must be placed on the back of each buckle. Packaging must follow standard commercial guidelines, with each item wrapped and packed 50 units per box. Interested firms must provide their company details, small business status, and evidence of previous experience with similar requirements to facilitate a capability determination.
Apparel Accessories and Other Apparel Manufacturing

POSTED

3 days ago

DEADLINE

in about 6 hours
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS