This Award Notice opportunity from Department Of Commerce was posted on August 27, 2013. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

REMOVE & REPLACE HATCHES ABOARD NOAA SHIP OPKEANOS EXPLORER

Awarded

EA133M-13-RQ-0692Federal

Submission Closed08/27/2013, 08:00:00 AM EDT

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 336611

New

SLED

F&W, 2018 Munson Packman Boat Repower project

Solicitation # 2018 Munson Packman Boat Repower

The Confederated Tribes of the Colville Reservation Fish and Wildlife Department is seeking a factory-certified marine contractor to perform a complete propulsion repower and helm system integration on a 30 foot Munson Packman landing craft. The project involves a six-phase process including the decommissioning and removal of two existing Honda BF250A outboard engines, a structural assessment of the transom, and the installation of two new Honda BF250D Drive-by-Wire outboards. Key technical requirements include the installation of Honda iST electronic control heads at primary and secondary helm stations, integration with the existing NMEA 2000 backbone and SeaStar PA1315-2 Power Assist Steering system, and a full fuel system upgrade using USCG Type A1-15 lines. The project concludes with static diagnostics and a minimum two hour sea trial to validate performance and safety protocols. The selected contractor must be a Honda Marine Authorized Dealer or Service Center and provide a secure facility for vessel storage. Proposals are due by November 13, 2026, and will be evaluated based on a 100 point scale with significant preference given to Colville and other Indian Business Enterprises. Award criteria prioritize reliability and effectiveness over the lowest cost. Contractual requirements include a performance bond for awards exceeding 100,000 dollars or a 25 percent retainage, comprehensive liability and workers compensation insurance, and consent to the jurisdiction of the Colville Tribal Court. Payments are subject to the tribal appropriation process and the availability of funds in the tribal treasury.

Confederated Tribes of the Colville Reservation

POSTED

DEADLINE

Solicitation # SPE7M4-27-T-2573

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Solicitation # SPE7L4-27-T-0875

This solicitation, issued by the DLA Weapons Support LSO Combat Vehicles and Armament, is a Small Business Set-Aside for the procurement of 12 roller chains (NSN 3020-01-455-5635). The contract is a fixed-price request for quotations with a required delivery date of August 9, 2027, and a need ship date of July 9, 2027. Delivery is FOB Origin, with both inspection and acceptance occurring at the origin. The items must be produced according to reference drawing 19200 12524407 Revision A and must adhere to strict packaging and marking standards, including MIL-STD-2073-1E, MIL-STD-129, and Special Packaging Instruction AM12524407. The contract mandates rigorous quality control, requiring the manufacturer to comply with ISO 9001:2015 and utilize specific sampling methods such as MIL-STD-1916. Government Source Inspection is required, and first article approval authority is delegated to the DCMA, with a first article test report due within 60 days of the contract date. Security and compliance requirements are significant, including adherence to CMMC Level 2, NIST SP 800-171, and strict export controls under ITAR and EAR. Additionally, the contractor must comply with the Berry Amendment and Buy American Act, and utilize the Wide Area WorkFlow system for electronic invoicing and payment.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

Angler Surveying Vessel SupplyThis subcontract involves the manufacture and delivery of one angler surveying vessel to support prime contractors working on Ministry of Natural Resources projects within the Lake Ontario Management Unit. The vessel must feature a marine-grade hull and a deck configuration specifically designed for offshore surveying activities, ensuring full compliance with Occupational Health and Safety Act standards for equipment safety. Managed by the Government of Ontario, the project falls under NAICS code 336611 and will be performed in Canada. Interested parties must submit their responses by November 24, 2026, to fulfill the requirement for the delivery of the completed surveying vessel.

POSTED

DEADLINE

Port STL Interlock Evaluation and RepairThis subcontract involves the evaluation and corrective maintenance of the Port STL Interlock system for prime contractors supporting Navsup Fleet Logistics Center Yokosuka projects. The scope of work requires assessing the current state of the system and performing necessary repairs to restore it to full operational standards. All work must be executed using propulsion machinery tools and components specifically designed for the T-AO 206 class and must strictly adhere to MSC Corrective Maintenance Engineering standards. The primary objective of the contract is the delivery of a fully operational Port STL Interlock. This opportunity is categorized under NAICS code 336611 and is managed by the Department of Defense. Interested parties should note the response deadline of November 12, 2026.

Navsup Flt Logistics Ctr Yokosuka

POSTED

DEADLINE

Supply of Brand-Name Marine Seat Bottoms (P/N SW-01309)This subcontract, issued by the Department of Homeland Security agency CG-SEA-C23, requires the procurement of forty brand-name seat bottom components, part number SW-01309, for US Coast Guard 26-foot TANB asset projects. The selected provider must supply the specific brand-name product designated under FAR 13.106-1(b) and ensure all items are delivered to Curtis Bay, Maryland, in compliance with FAR 52.211-8 and 52.211-9 delivery schedules. The opportunity is designated as a total Small Business Set Aside under NAICS code 336611. Interested parties must submit their responses by November 18, 2026, to fulfill the requirement for these specialized marine components.

POSTED

DEADLINE

5-year, Long Term, Multiple Award, Indefinite-Delivery, Indefinite-Quantity Procurement Contract

Solicitation # N0010427RY051

NAVSUP Weapon Systems Support is preparing to solicit a five-year, long-term, multiple-award, indefinite-delivery, indefinite-quantity procurement contract. The contract structure consists of one base year and four option years, requiring offerors to provide firm-fixed prices for each year and each contract line item. The scope of work involves the provision of specific parts and materials identified by National Item Identification Numbers, including items such as 24x36 DURA X Tiles. While the government has provided best estimated quantities for evaluation purposes, these do not constitute a guaranteed purchase quantity. Competition is strictly limited to pre-qualified approved sources who possess the necessary engineering skills, manufacturing knowledge, and data rights essential to maintaining part quality. Award eligibility is contingent upon meeting qualification requirements at the time of award in accordance with FAR clause 52.209-1. This procurement does not utilize FAR Part 12 policies for commercial items, although interested parties may notify the contracting officer of available commercial alternatives. This notice serves as a presolicitation and does not constitute a formal request for proposal or a commitment by the government to award a contract.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Propulsor Device Machining

Solicitation # N0016727Q1004

The Naval Surface Warfare Center Carderock Division (NSWCCD) is soliciting quotes for solicitation N0016727Q1004 to perform propulsor component machining for VIRGINIA Class propulsor devices. This firm-fixed-price contract is a total small business set-aside under NAICS 336611. The scope of work involves the fabrication of various piece parts, including body tubes, top caps, bottom caps, center masses, and shim rings. While the government provides raw materials for most components, the contractor is responsible for procuring mild steel ASTM A106 for the R4 shim rings. The period of performance extends from the date of award through July 18, 2027, with specific delivery dates for various line items requested by July 30, 2027. Award will be granted to the responsible quoter who provides a technically acceptable quote representing the best value, specifically the lowest evaluated price. Technical acceptability is determined on a pass/fail basis, and the government may consider past performance via the Supplier Performance Risk System (SPRS). Contractors must maintain a Quality Management System compliant with ANSI/ASQ/ISO 9001:2015 and meet CMMC Level 2 cybersecurity requirements. Deliverables include lot acceptance inspection results, certificates of conformance, and monthly progress reports. All parts must be cleaned with acetone and marked with unique item identifiers per MIL-STD-130 before being shipped to destinations in Bethesda, Maryland, or Kittery, Maine. Questions are due by November 4, 2026, and final quote packages must be submitted by November 12, 2026.

POSTED

DEADLINE

Solicitation # 52000PR270000250

The U.S. Coast Guard Surface Forces Logistics Center is soliciting quotes for a firm-fixed-price purchase order to provide commercial shipyard services for the haul-out, blocking, and relaunch of a 64-foot Aids to Navigation Boat assigned to ANT Colfax. The primary objective of this effort is to facilitate the replacement of an inoperable fathometer system. While the government will provide the new fathometer system and handle vessel delivery and sea trials, the contractor is responsible for providing all personnel, equipment, and facilities necessary to safely lift the vessel using a travel lift, marine railway, or drydock and supporting it according to USCG specifications. This procurement is a 100% Small Business Set-Aside, with a proposed start date of February 1, 2027. All work must be completed within three days of the vessel's arrival at a contractor facility located within a reasonable navigable distance from ANT Colfax. Award evaluation will be based on technical capability, past performance, and fair and reasonable pricing. Final acceptance is contingent upon a successful watertight integrity test to verify zero water ingress at the hull penetration and an operational sea trial to ensure the new system functions without electrical interference. All invoicing must be processed through the Invoice Processing Platform.

POSTED

DEADLINE

USS BLUE RIDGE (LCC-19) TGI 3819P24302-A01, Yokosuka Japan

Solicitation # N6264926RA037

NAVSUP Fleet Logistics Center Yokosuka has issued solicitation N6264926RA037 for the repair and maintenance of the USS BLUE RIDGE (LCC-19). The primary scope of work involves the installation of a new sleeve for the propeller and stern tube shaft, as detailed in Task Group Instruction 3819P24302-A01. This is a firm-fixed-price contract intended exclusively for sources authorized to operate and do business in Japan. The period of performance is scheduled from February 23, 2027, through June 8, 2027, with work to be performed at the contractor's facility or the Commander, Fleet Activities Yokosuka Naval Base. Award will be granted to the responsible, technically acceptable offeror with the lowest evaluated price, with no technical tradeoffs permitted. To be eligible, offerors must be registered in the System for Award Management and hold an active U.S. Navy MSRA/ABR Agreement by the proposal submission deadline of November 20, 2026. Proposals must be submitted in English via email or DoD SAFE and include the required Proposal Breakdown Form. Performance will be monitored by the government through a Quality Assurance Surveillance Plan to ensure compliance with NAVSEA Standard Items and other specified technical requirements.

Navsup Flt Logistics Ctr Yokosuka

POSTED

DEADLINE

20--DOOR,METAL,MARINE STRU

Solicitation # SPE7M4-27-T-2415

Solicitation SPE7M4-27-T-2415, issued by the DLA Weapons Support Fluid Handling Division, is a request for the procurement of five metal marine structural doors. These doors must adhere to drawing 1648659-3211, featuring dimensions of 30W x 66H, right-hand configuration, a latch set, and a fixed light. The delivery is required 168 days after order, with a need ship date of May 4, 2027, and a final delivery date of July 8, 2027, to DLA Distribution San Diego. The contract is designated as FOB Destination Other, and payment must be processed electronically through the Wide Area WorkFlow system. The procurement is subject to strict regulatory and security requirements. Technical data is controlled under ITAR or EAR, requiring contractors to have approved US/Canada Joint Certification Program certification and specific DLA export-control authorizations. Cybersecurity compliance is mandatory, specifically CMMC Level 2 certification via a Third-Party Assessment Organization. Quality standards require the manufacturer's inspection system to comply with SAE AS9003 or ISO 9001. Packaging and marking must follow MIL-STD-2073-1E and MIL-STD-129, respectively. Additionally, the contract incorporates the Buy American Act and Berry Amendment restrictions, and requires adherence to DFARS 252.204-7012 for safeguarding covered defense information.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

20--CONTROL SYSTEM,CPR

Solicitation # SPE7M4-27-T-2365

Solicitation SPE7M4-27-T-2365 is a fixed-price procurement issued by the DLA Weapons Support Fluid Handling Division for one unit of a Control System, CPR, identified by NSN 2010012637030 and part number SV117 from The Oilgear Company. The requirement is designated as a critical application item. The need ship date is May 4, 2027, with an original required delivery date of October 21, 2027. Delivery is set as FOB Origin, with inspection and acceptance occurring at the destination, specifically the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The contract mandates strict adherence to DLA packaging requirements (RP001), MIL-STD-2073-1E for packaging data, and MIL-STD-129 for marking. It includes significant regulatory requirements, including CMMC Level 2 self-assessment, safeguarding of covered defense information, and compliance with the Buy American Act and Berry Amendment. Additionally, the contractor must ensure that mercury or mercury-containing compounds are not intentionally added to the hardware, except where functionally required. Invoicing must be processed electronically through the Wide Area WorkFlow system. While the solicitation is listed as a Service-Disabled Veteran-Owned Small Business set-aside in some metadata, the contract text explicitly states it is not a small business set-aside.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 15 hours ago

DEADLINE

in 10 days

AI Contract Overview

The Department of Commerce, National Oceanic and Atmospheric Administration (NOAA) issued solicitation EA-133M-13-RQ-0692 for the removal of two existing watertight hatches from the aft mission deck and the installation of a new flush-mounted manhole aboard the NOAA Ship Okeanos Explorer in North Kingstown, Rhode Island. This project requires the contractor to provide all necessary labor, materials, and equipment, including the fabrication of containment in the void, cropping out existing hatches, and installing under-deck supports using ABS certified steel. The work is guided by technical specifications and structural drawings including OE-601-101, OE-150-101D, and OE-611-101D. This requirement was designated as a 100 percent small business set-aside under NAICS code 336611 for shipbuilding and repairing. The contract was structured as a firm fixed price purchase order with a performance period scheduled from September 9, 2013, through September 20, 2013. Managed by the Eastern Regional Acquisition office in Norfolk, Virginia, the procurement process included a pre-bid inspection on August 19, 2013, with an anticipated award date around August 26, 2013.

General Info

Agency

Department Of Commerce Noaa

Contract Value

$15,900

NAICS

336611 - Ship Building and Repairing

Place of Performance

Set-Aside

Total Small Business Set-Aside

Awardee

LIGHTSHIP GROUP LLC

Award Issued Date

08/27/2013, 12:00:00 AM UTC

Documents

rfp

High

sow

High

specifications

High

specifications

High

specifications

High

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

1 update

PhaseAwarded

PostedAug 6

Presolicitation

Notice updatedAug 6

The notice description changed.

Type ChangedAug 14

Presolicitation → Solicitation

AwardedAug 27

Contract was awarded

Submission Closed

08/27/2013, 08:00:00 AM EDT

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Commerce Noaa

Contacts2 people available

OfficeNORFOLK, VA, 23510, USA

Organization / AgencyDepartment Of Commerce Noaa

Office AddressNORFOLK, VA, 23510, USA

Contacts

Carrie L. Perry

Kolby Harold

Full Description

J- REMOVE THE TWO EXISTING HATCHES FROM AFT DECK AND PROVIDE AND INSTALL NEW HATCH ABOARD NOAA SHIP OKEANOS EXPLORER NOTICE DATE: AUGUST 6, 2013 Notice Type: Pre-solicitation NAICS: 336611 - SHIP BUILDING AND REPAIRING Contracting Office: Department of Commerce, National Oceanic and Atmospheric Administration (NOAA), Eastern Regional Acquisition, 200 Granby Street, Suite 815, Norfolk, VA 23510 The National Oceanic Atmospheric Administration (NOAA), Eastern Regional Acquisition, Norfolk, VA on behalf of Office of Marine and Aviation Operations (OMAO) is soliciting a requirement to remove the two existing hatches from Aft deck and provide and install a new hatch aboard NOAA ship Okeanos Explorer, North Kingstown, RI. Provide all labor, material and equipment in accordance with the attached Statement of Work, "Mission Deck Watertight Hatch Removal & Manhole Installation". This RFQ is 100 percent set-aside for small business concerns. The associated North American Industry Classification System (NAICS) code is 336611, which has a corresponding size standard of 1,000 employees. Solicitation number EA-133M-13-RQ-0692 will be issued August 6, 2013 and will close August 22, 2013. The total period of performance for all work specified in the Statement of Work is September 9, 2013 through September 20, 2013. A pre-bid inspection will be held on August 19, 2013 at 10:00 am ET. All interested parties are strongly encouraged to attend. The port engineer, Ken Marston, will be hosting the pre-bid inspection and can be reached at +1 (555) 000-0000. The Government anticipates awarding a firm fixed price purchase order to the responsible bidder whose bid, conforming to the solicitation, will be most advantageous to the Government, considering only price and the price-related factors specified in the solicitation. All responsible sources may submit a quotation which shall be considered by the agency. The anticipated award date is on or about August 26, 2013. Contractors are encouraged to register with the FedBizOpps Vendor Notification Service as well as the Interested Vendors List for this acquisition (see applicable tab within FedBizOpps where this synopsis/solicitation is posted). Potential offerors may direct all inquiries pertaining to the solicitation in writing to contact@example.gov . Telephonic requests will not be honored.