Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

This Government Contract opportunity from Department Of Commerce was posted on September 3, 2010. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Repair of Elevators #1-4 in Building 101 at NIST Gaithersburg MD

Awarded
SB134110RQ0449Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 238290
New
Centennial JCC Panic Hardware Services (Electrical Room Egress Doors)
Solicitation # Panic Hardware (Electrical Room Egress Doors)
Management & Training Corporation is soliciting bids for the installation of commercial-grade panic hardware on electrical room egress doors at the Centennial Job Corps Center in Nampa, Idaho. The project encompasses five specific locations, including the B-Cafeteria, Men's Dorm, Women's Dorm, Recreation, and Vocational areas. The selected contractor must perform site surveys to verify door dimensions and fire ratings, procure Grade I commercial-grade panic bars and matching hardware, and ensure all installations comply with NEC 2023 Article 110.26(C)(3), NFPA 101 Life Safety Code, and ADA standards. Performance verification requires a minimum of 10 consecutive cycle tests to ensure fail-safe operation. This is a fee-for-service subcontracting opportunity set aside for small businesses, including VOSB, SDVOSB, WOSB, and HUBZone certifications. Bidders must submit a lump sum price via a bid sheet, provide three references for similar projects, and complete a supplier onboarding packet including a W-9 and self-certification form. All submissions are due by December 1, 2026, at 3:00pm MST. The contract is subject to various Federal Acquisition Regulations, including prevailing wage rates under the Davis-Bacon Act, Executive Order 14026, and strict information security and privacy breach notification requirements.
Management & Training Corporation/Centennial Job Corps Center

POSTED

about 3 hours ago

DEADLINE

in about 1 month
NAICS: 238290
New
SLED
NODC Roll-Up Counter Shutter Replacement
Solicitation # SRC0000042163
Solicitation SRC0000042163 is for a turnkey project to replace the roll-up counter shutter in the canteen of building 610 at the Northwest Ohio Developmental Center in Toledo, Ohio. The scope of work includes the removal and disposal of the existing shutter and the installation of one Wayne Dalton Rolling Counter Door, Model CFS-510. This specific model must be nonrated, clear anodized aluminum with flat slats for face of wall mounting, featuring a right-side hand-crank manual operation and pad-lockable slide bolt locking on both ends. The contract is estimated to be effective from October 19, 2026, through June 30, 2027. Bids will be awarded to the lowest responsive and responsible bidder. Interested parties must submit their quotes via OhioBuys by November 9, 2026, including a completed item grid for parts and labor, a formal quote valid for at least 30 days, and required documentation such as the Standard Affirmation and Disclosure Form and the Contractor Information Form. Bidders may also submit a Contractor Certification Statement Form to claim preferences for Buy American, Buy Ohio, or Veteran Friendly Business Enterprise status. Compliance requirements include adherence to Ohio Prevailing Wage Laws, OSHA safety standards, and strict background and conduct certifications for all personnel working on the grounds of the developmental center.
Developmental Centers, Ddd207000 Northwest Ohio Dc Nwdc

POSTED

about 21 hours ago

DEADLINE

in 19 days
NAICS: 238290
New
Federal
Z1DA--537-26-101 Construction of Ogden Elevator Cab Interiors Jesse Brown VA Medical Center
Solicitation # 36C25227B0006
252-NETWORK Contract Office 12 (36C252)

POSTED

about 21 hours ago

DEADLINE

in about 1 month
NAICS: 238290
New
Federal
Johnston Ridge Observatory Backup Generator Repairs Gifford Pinchot National Forest
Solicitation # 1240BD27Q0009
Gifford Pinchot National Forest

POSTED

about 21 hours ago

DEADLINE

in 14 days
NAICS: 238290
New
Federal
Elevator Control System Modernization – FCC Yazoo City (Low II)
Solicitation # 102026
FCC Yazoo City

POSTED

about 21 hours ago

DEADLINE

in 16 days
NAICS: 238290
New
SLED
147039 SHRINK TUBE
Solicitation # 232585
Water & Power

POSTED

1 day ago

DEADLINE

in 6 days
NAICS: 238290
New
SLED
Cold Storage & Food Warehouse InstallationThis subcontract for the Poway Unified School District involves the installation of specialized food storage, receiving, and loading infrastructure. The scope of work includes the implementation of industrial refrigeration, cold storage rooms, warehouse racking systems, and loading dock equipment, utilizing industrial freezers and coolers to deliver a fully operational facility. The project is located in Poway, California, under NAICS code 238290. Interested parties must submit their responses by the deadline of December 15, 2026.
Poway Unified School District

POSTED

1 day ago

DEADLINE

in about 2 months
NAICS: 238290
New
SLED
Hydraulic Systems and Liftgate IntegrationThis subcontract for Hydraulic Systems and Liftgate Integration involves the installation of hydraulic liftgates and cranes for prime contractors working on Idaho Transportation Department vehicle upfitting projects. The scope of work requires the precise routing of high-pressure hydraulic hoses to avoid chassis lines and rub points, utilizing manufacturer-recommended sealants and protective hose wraps for metal contact. The final deliverable is the provision of fully tested and operational hydraulic lift and crane systems. The opportunity is issued by the State of Idaho under NAICS code 238290. Interested parties must submit their responses by the deadline of November 17, 2026, following the posting date of October 20, 2026.
State of Idaho

POSTED

1 day ago

DEADLINE

in 27 days
NAICS: 238290
New
SLED
Building Automation System (BAS) InstallationThis subcontract opportunity with the State of North Carolina Construction Office involves the installation and configuration of a new Building Automation System for Department of Public Safety facility projects. The selected contractor will be responsible for installing BAS hardware and software, utilizing Distech ECY Series equipment to integrate various facility systems into a single centralized automation platform. The final deliverable is a fully operational and commissioned system. Eligible bidders must hold valid state licensure in mechanical, electrical, or controls contracting. This project falls under NAICS code 238290. Interested parties must submit their responses by the deadline of November 17, 2026, at 4:00 PM.
State of NC - Construction Office

POSTED

1 day ago

DEADLINE

in 27 days
NAICS: 238290
New
SLED
Water Treatment & Chemical ManagementThis subcontract for Water Treatment and Chemical Management supports prime contractors on projects for the County of Orange Sheriff-Coroner in Orange, California. The selected provider is responsible for supplying and managing chemical treatments and water quality management, specifically focusing on the treatment of cooling tower water and rigorous testing to prevent scale and biological growth. The contractor must ensure full compliance with CDPH guidelines and California Health and Safety Code Sections 116057 and 116057.5. Key deliverables include the provision of treated water systems and the submission of detailed water quality reports. The solicitation was posted on October 20, 2026, with a response deadline of December 16, 2026.
County of Orange, Sheriff-Coroner

POSTED

1 day ago

DEADLINE

in about 2 months
NAICS: 238290
New
SLED
IFB No. 133713 FMS 25 Multiple Roll-up Door Repairs and Preventative Maintenance, Hammer Field Armory
Solicitation # 133713
The California Military Department is soliciting bids under IFB No. 133713 for comprehensive repairs and five-year preventative maintenance of multiple roll-up doors at the Hammer Field Armory (FMS 25) in Fresno, California. The scope of work includes targeted component replacement, safety and control system upgrades, and the full replacement of one door to ensure operational reliability. The selected contractor must possess a D-28 Doors, Gates and Activating Devices license and is allotted 120 calendar days to complete the project. Award will be granted to the lowest responsive responsible bidder, with a 25 percent Small Business participation goal and a 5 percent Disabled Veteran Business Enterprise (DVBE) goal. Prospective bidders were required to attend a mandatory pre-bid job walk on October 26, 2026. All bids must be submitted electronically as a single PDF by November 16, 2026, at 2:00 PM. Required documentation includes a rate sheet and various certifications, such as the Darfur and Iran Contracting Act forms, Payee Data Record, and Non-Collusion Affidavit. The contract mandates compliance with State General Prevailing Wage Rates, the Buy American Act for construction materials, and ADA standards. Payment will be processed electronically in arrears, with invoices submitted no more frequently than monthly and no less than quarterly. Bonding requirements apply if the bid or public works expenditure exceeds $24,999.99, requiring bid, payment, and performance bonds.
California Military Department

POSTED

1 day ago

DEADLINE

in 27 days
NAICS: 238290
New
SLED
Commercial Sliding Door Technical ServicesThe Commercial Sliding Door Technical Services subcontract involves providing specialized technical labor and maintenance for sliding door systems on Collin County facility projects. The selected provider will work under prime contractors to inspect tracks, rollers, and automated operators, while performing general repairs and parts installation to ensure all systems are fully operational and safety-compliant. This opportunity is categorized under NAICS code 238290 and is managed by the Facilities agency in Texas. Interested parties must submit their responses by the deadline of November 12, 2026, following the posting date of October 19, 2026.
Facilities

POSTED

1 day ago

DEADLINE

in 22 days

General Info

Agency

Department Of Commerce Nist

Contract Value

$969,005

NAICS

238290 - Other Building Equipment Contractors

Place of Performance

MD

Set-Aside

NONE

Awardee

Quality Elevator Co., Inc. 4808 Upshur Street BLADENSBURG MD 20710 USA

Award Issued Date

Documents

15

A001 Amendment to Solicitation SB1341-10-RQ-0449

DOC, High priority: read this first2 pages · amendment
High

A002 Amendment to Solicitation SB1341-10-RQ-0449

DOC, High priority: read this first2 pages · amendment
High

AMD Safety Forms 01-04 - Construction Safety Forms

DOC, High priority: read this first9 pages · sow
High

Attachment 8 – Construction Safety Instructions

DOC, High priority: read this first18 pages · sow
High

Drawing 101-831: Replace Movement Gear and Controllers, Elevators 1-4, Building 101

PDF, High priority: read this firstspecifications
High

Drawing 101-832

PDF, High priority: read this firstspecifications
High

Drawing 101-833

PDF, High priority: read this firstspecifications
High

Drawing 101-882 - Fully-Actived Semiconductors

PDF, High priority: read this firstspecifications
High

Drawing 101-883: DVR Series Diagram - 4 Way Switch

PDF, High priority: read this firstspecifications
High

General RFQ Information - Pre-Proposal Conference Notice

DOC, High priority: read this firstrfq
High

SB1341-10-RQ-0449 RFQ for Elevator Repairs

DOC, High priority: read this first19 pages · rfq
High

WD 78-1183 Rev. 45 Wage Determination

HTML, High priority: read this first2 pages · wage-determination
High

Attachment 10 - Guidelines for Contractors and A/E Firms

DOC, Low priority9 pages · guidelines
Low

Attachment+1+to+A001+-+Site+Visit+Attendees.tif

TIF

Specifications.zip

ZIP

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

2 updates
PhaseAwarded
Posted

Presolicitation

Notice updated

The notice description changed.

Notice updated

The notice description changed.

Type Changed

Presolicitation → Solicitation

Awarded

Contract was awarded

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Commerce Nist
Contacts2 people available
OfficeGAITHERSBURG, MD, 20899, USA
Organization / AgencyDepartment Of Commerce Nist
Office AddressGAITHERSBURG, MD, 20899, USA
Contacts
Joan M SmithContract Specialist
contact@example.gov
+1 (555) 000-0000
Michael R. SzwedSupervisory Contract Specialist
contact@example.gov
+1 (555) 000-0000

More opportunities from Department Of Commerce Nist

Same awarding agency

NAICS: 236210
New
Federal
Building 215 Clean Room HEPA Filter Replacement
Solicitation # RFI-195000-26-00181
The National Institute of Standards and Technology is conducting market research through a Request for Information for the Building 215 Advanced Measurement Laboratory cleanroom repair and HEPA filter replacement project in Gaithersburg, Maryland. This initiative follows a previous solicitation that failed to produce an acceptable offer, prompting NIST to reassess its acquisition strategy and seek industry feedback on constructability, cost, and schedule feasibility. The project scope involves the modernization of an 1,800 square meter facility, including the replacement of approximately 1,200 HEPA filters, 70 VAV terminal units, and 54 airflow monitoring devices, as well as the installation of 32 exhaust air control valves and associated ductwork repairs, testing, and recertification. A critical component of the project is the proposed phasing plan, which aims to minimize research disruptions by utilizing 19 construction phases, including 18 critical cleanroom outage phases. Each critical outage is currently envisioned as a nine-day window starting Friday evening and requiring 24/7 operations to achieve ready-for-re-occupancy by the following Monday morning. NIST is specifically requesting rough-order-of-magnitude cost estimates and industry input on whether this aggressive outage schedule is realistic or if it creates prohibitive risks and costs. Responses, including company experience and recommendations for improving competition and project execution, are due by October 14, 2026.
Industrial Building Construction

POSTED

2 days ago

DEADLINE

in 12 days
View Details
NAICS: 334511
Federal
Optional Leak Check System SupplyThis contract involves the supply of an optional high-sensitivity leak detection system designed to verify the hermetic seal integrity within a microfluidic TEM cell. The primary focus is to provide a reliable solution that ensures the cells remain sealed, which is crucial for maintaining the integrity and performance of these specialized devices. The contract is classified under NAICS code 334511, indicating its association with electromedical and electrotherapeutic apparatus manufacturing. The contract is a subcontract issued by the Department of Commerce's National Institute of Standards and Technology (NIST) and is to be performed in Gaithersburg, Maryland, with the ZIP code 20899. Although specific solicitation details and set-aside statuses are not provided, the project emphasizes precision and quality in leak detection technology to support advanced microfluidic applications. This system will likely enhance the reliability and accuracy of microfluidic experiments or operations conducted using the TEM cell.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

5 months ago

DEADLINE

N/A
View Details
NAICS: 541330
Federal
Installation and Training ServicesThe contract involves the on-site installation of a Transmission Electron Microscope (TEM) holder at the National Institute of Standards and Technology (NIST) facility located in Gaithersburg. Along with the installation, the contractor is responsible for providing comprehensive operator training to ensure proper use and maintenance of the equipment. This subcontract, classified under NAICS code 541330, supports specialized professional services related to the setup and operational readiness of high-precision scientific instruments. Issued by the Department of Commerce, NIST, the contract ensures that the TEM holder is installed at the specified Gaithersburg location, with a focus on delivering both technical installation and in-depth training. This dual service approach is designed to enhance user proficiency and optimize the performance of the equipment, supporting NIST’s mission of advancing measurement science. The contract was posted in May 2026 and is accessible through the System for Award Management (SAM) platform.
Engineering Services

POSTED

5 months ago

DEADLINE

N/A
View Details
NAICS: 541512
Federal
Real-Time Sample Correction Software DevelopmentThe contract involves the development and integration of specialized software designed to provide real-time correction for sample drift during Transmission Electron Microscopy (TEM) imaging, thereby ensuring imaging stability. This work is categorized under the NAICS code 541512, which relates to computer systems design services. The contract is a subcontract issued by the Department of Commerce, specifically through the National Institute of Standards and Technology (NIST). The project is set to be performed in Gaithersburg, with a focus on enhancing the precision and reliability of TEM imaging by addressing sample drift issues in real time. While specific financial or timeline details are not provided, the contract aims to support advanced scientific research through improved imaging software, reflecting the Department of Commerce's commitment to technological innovation in measurement and standards.
Computer Systems Design Services

POSTED

5 months ago

DEADLINE

N/A
View Details
NAICS: 333992
Federal
Integrated Fluid Delivery System SupplyThis contract entails the supply of an integrated fluid delivery system designed for precise fluid management during transmission electron microscopy (TEM) experiments. The system enables in-situ solution exchange and degassing, which are critical for maintaining experimental accuracy and fluid integrity under the microscope. The contract is classified under the NAICS code 333992, indicating its focus on fluid power valve and hose fitting manufacturing, emphasizing the technical specificity required. The subcontract is issued by the Department of Commerce's National Institute of Standards and Technology (NIST) and calls for performance in Gaithersburg, Maryland, ZIP code 20899. Specific details such as the solicitation number or set-aside type were not indicated. This procurement reflects the agency’s commitment to advancing experimental capabilities in scientific research by integrating sophisticated fluid handling systems directly into microscopy workflows.
Welding and Soldering Equipment Manufacturing

POSTED

5 months ago

DEADLINE

N/A
View Details
NAICS: 334516
Federal
Electrochemical Liquid TEM Holder SupplyThe contract entails the supply of a specialized electrochemical liquid transmission electron microscopy (TEM) holder designed to facilitate operando imaging of material dynamics. This advanced TEM holder incorporates integrated heating and cooling functionalities, enabling precise temperature control during imaging processes. The equipment is intended to support detailed analysis of material behaviors under electrochemical conditions in real time. Issued by the Department of Commerce’s National Institute of Standards and Technology (NIST), the subcontract falls under the NAICS code 334516, which pertains to analytical laboratory instrument manufacturing. The performance location is specified as Gaithersburg, with a ZIP code of 20899. The contract was posted on May 20, 2026, and although some logistical details such as solicitation number and point of contact are not provided, the primary goal is the procurement of this customized TEM holder to enhance research capabilities in material science.
Analytical Laboratory Instrument Manufacturing

POSTED

5 months ago

DEADLINE

N/A
View Details
NAICS: 488490
Federal
Precision Handling and Packaging of Micro SpecimensThis contract involves the development of specialized protocols for the safe handling, storage, and shipping of fragile micro specimens. The work focuses on creating custom fixtures designed to securely hold these delicate items, alongside implementing environmental protection measures to ensure their integrity during transportation and storage. The objective is to mitigate risks associated with damage caused by improper handling or adverse conditions. The contract is a subcontract issued by the Department of Commerce's National Institute of Standards and Technology (NIST), with the place of performance located in Gaithersburg. It falls under the NAICS code 488490, which pertains to specialized freight trucking services. The project was posted on May 6, 2026, and aims to enhance precision in the packaging and transportation of micro-scale specimens, ensuring they reach their destinations safely and remain viable for their intended scientific use.
Other Support Activities for Road Transportation

POSTED

6 months ago

DEADLINE

N/A
View Details
NAICS: 541380
Federal
Materials Characterization and Quality Validation ServicesThis contract involves the independent verification of micro specimen properties, focusing on microstructure, composition, and mechanical behavior analysis. The services include comprehensive reporting and ensuring traceability throughout the verification process. It is classified under subcontracting and pertains to materials characterization and quality validation, intended to support high standards in material assessment. The contract falls under the NAICS code 541380, aligning with testing laboratories and related services. It is administered by the Department of Commerce's National Institute of Standards and Technology (NIST) and performed in Gaithersburg, Maryland, ZIP code 20899. The work is designed to enhance the accuracy and reliability of material property data, which is critical for subsequent research and development initiatives or quality assurance in manufacturing processes.
Testing Laboratories and Services

POSTED

6 months ago

DEADLINE

N/A
View Details
NAICS: 334419
Federal
Micro-Sized Lead-Free Solder Specimen FabricationThe contract involves the fabrication of micro-sized lead-free solder specimens specifically designed for fracture testing in advanced packaging applications. The focus is on producing specimens with precisely controlled composition and microstructure to meet the requirements for evaluating the mechanical performance of solder materials in microelectronics. This work is crucial for advancing reliable lead-free solder technologies that comply with environmental regulations and enhance device durability. Issued by the Department of Commerce's National Institute of Standards and Technology (NIST), the subcontract aims to support research and development efforts within the advanced packaging industry. The place of performance is Gaithersburg, Maryland, highlighting a location known for its concentration of scientific research. The contract aligns with NAICS code 334419, which pertains to other electronic component manufacturing, indicating that this effort supports manufacturing-related innovation.
Other Electronic Component Manufacturing

POSTED

6 months ago

DEADLINE

N/A
View Details
NAICS: 334418
Federal
Microfabrication of Electroplated Copper Micro SpecimensThis contract involves the design and fabrication of free-standing micro-scale copper specimens with highly controlled geometry, microstructure, and grain size to closely mimic semiconductor interconnects for mechanical testing purposes. The work requires precision microfabrication techniques, focusing on electroplated copper to replicate the physical and material properties of actual semiconductor components used in reliability assessments. The ultimate goal is to provide accurate test specimens that can aid in advancing the understanding of mechanical behavior in microelectronic materials. The subcontract is issued by the Department of Commerce, specifically the National Institute of Standards and Technology (NIST), with the place of performance located in Gaithersburg. The solicitation aligns with NAICS code 334418, indicating a focus on electronic instrument manufacturing. This effort supports the development of standardized testing methodologies by ensuring that specimens closely replicate real-world interconnect conditions at the micro-scale level.
Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

6 months ago

DEADLINE

N/A
View Details
NAICS: 541330
Federal
Building Automation and Controls EngineeringThis contract involves providing engineering design and integration services focused on building automation, controls, and energy management systems tailored for laboratory and office settings. It is a subcontract opportunity under a Total Small Business Set-Aside program, aligned with NAICS code 541330, which covers engineering services. The contract is associated with the Department of Commerce, specifically the National Institute of Standards and Technology (NIST), and the work will be performed in Gaithersburg, Maryland, ZIP code 20899. The primary objective is to support NIST by delivering expert services that enhance building system efficiency and integration in controlled environments such as labs and offices. This contract emphasizes small business participation and aims to leverage specialized engineering expertise to improve automation and energy management in government facilities.
Engineering Services

POSTED

6 months ago

DEADLINE

N/A
View Details
NAICS: 541330
Federal
Elevator Modernization EngineeringThe contract involves providing engineering services for the modernization and upgrade of elevator systems within NIST facilities, focusing on design, specifications, and ensuring compliance with relevant accessibility and safety standards. It is a subcontract opportunity under a Total Small Business Set-Aside, adhering to FAR 19.5 regulations, specifically falling under NAICS code 541330, which covers engineering services. The Department of Commerce, specifically the National Institute of Standards and Technology (NIST), is the contracting agency, with the work to be performed in Gaithersburg, Maryland (zip code 20899). The contract aims to enhance the reliability, safety, and accessibility of elevator systems at the facilities, aligning with federal standards and requirements.
Engineering Services

POSTED

6 months ago

DEADLINE

N/A
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS