Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Resident Beds for Sitter and Barfoot Veterans Care Center

Active

QQ-123954State & Local

Response Deadline07/14/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the provision of resident beds specifically designated for the Sitter and Barfoot Veterans Care Center in Richmond, Virginia, with strict adherence to the exact brand and model specified in the solicitation. The solicitation, numbered QQ-123954, was posted on July 8, 2026, and responses must be submitted by July 14, 2026, at 7:00 PM Eastern Time. This procurement is managed by the Virginia Department of Veterans Services under the Sitter-Barfoot Veterans Care Center and is categorized as a SLED government acquisition. All beds must meet the mandated specifications to ensure compatibility with facility standards and veteran care requirements. The place of performance is clearly identified as 1601 Broad Rock Boulevard, Richmond, Virginia, where the beds will be installed and put into service. For inquiries, Cheri Lankford can be contacted via phone at 540-982-2860 or email at cheri.lankford@dvs.virginia.gov, and additional details are available through the provided vendor portal link.

General Info

Procure exact brand model beds for Sitter-Barfoot Veterans Care Center in Richmond, VA, by July 14, 2026.

Agency

Virginia → Sitter-Barfoot Veterans Care CenterView Agency

NAICS

337127 - Institutional Furniture ManufacturingView NAICS

Place of Performance

1601 Broad Rock Boulevard, Richmond, Virginia, VA, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseSolicitation

PostedJul 8

Solicitation

Response DeadlineJul 14

Submission deadline

Response Deadline

07/14/2026, 07:00:00 PM UTCin 4 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyVirginia → Sitter-Barfoot Veterans Care Center

Contacts1 person available

OfficeN/A

Organization / Agency

Virginia → Sitter-Barfoot Veterans Care Center

View Agency Profile

Office AddressN/A

Contacts

Cheri Lankford

contact@example.gov

+1 (555) 000-0000

Full Description

Show more

Patient beds for Sitter and Barfoot Veterans Care Center - must be brand and type specified

Similar Contracts

SKID, SEAT BACKThe contract pertains to the procurement of 21 units of SKID, SEAT BACK with NSN/Part Number 2540-01-270-6460 under Purchase Request 7017438547. The solicitation, identified by number SPE7L4-26-T-5528, was posted on July 9, 2026, with a response deadline of July 20, 2026. This is a federal solicitation issued by the Defense Logistics Agency under the Department of Defense, targeting a commercial or industrial supplier capable of fulfilling the specified military component requirement. The procurement operates under a federal acquisition framework with no set-aside classification specified, and performance is expected to occur within the United States. Interested parties must respond through the official DIBBS portal prior to the deadline to be considered for award.

Defense Logistics Agency

POSTED

DEADLINE

Office FurnitureThe contract titled Office Furniture under solicitation number W911S26U3546 is a total small business set-aside for items including conference tables, storage drawers, and standing desks, with updates to include dual monitor arms and revised NAICS code 337127. The solicitation has been extended to a seven-day window, with responses due by July 14, 2026, at 2:55 p.m. Eastern Time, following a posting date of July 9, 2026. Delivery is targeted to Fort Bragg with a designated representative meeting the truck upon arrival, and partial deliveries are permitted with flexible scheduling. The vendor must install all new furniture and remove fifteen existing pieces as part of the obligation. The contracting office is part of the Department of Defense under W6QM Micc-Ft Drum, located in Fort Drum, New York, with primary point of contact Andrew Farmer reachable by phone or email. The place of performance is specified as 28310, corresponding to Fort Bragg, North Carolina.

W6QM Micc-Ft Drum

POSTED

DEADLINE

345 TRS Dormitory Furniture RefreshThe U.S. Air Force is soliciting quotes under solicitation number FA301626Q0165 for a complete refresh of dormitory furniture for the 345th Training Squadron, including delivery and installation, with the acquisition set aside exclusively for small business concerns under NAICS code 337127. The requirement is issued as a combined synopsis and solicitation under FAR Part 12, meaning no separate written solicitation will be issued, and all offerors must respond using the attached SF 1449 form which contains the detailed list of items, quantities, delivery locations, acceptance criteria, and applicable provisions and clause language. The statement of work and salient characteristics for the furnishings are provided in the attachments, and all responses must be submitted via email to Peter Agwata and 2d Lt Joshua Lewis no later than 1:00 PM CDT on July 20, 2026, to be considered timely. Performance is required at Fort Lee, Virginia. The contracting activity is located at JBSA Lackland, Texas, and the Department of Defense is the procuring agency under a total small business set-aside as defined by FAR 19.5.

FA3016 502 Cons Cl

POSTED

DEADLINE

Conference Room Chairs (AMENDMENT)The Canadian Grain Commission is seeking bids for the purchase, delivery, and installation of conference room chairs under Amendment 1 to the Notice of Proposed Procurement, solicited through Supply Arrangement E60PQ-120001/H for rotary chairs and rotary stools. The requirement must be fulfilled by September 1, 2026, with a hard deadline of September 30, 2026, and the deliverables are to be delivered to Winnipeg, Manitoba. Only suppliers holding an active supply arrangement are eligible to bid; non-arrangement holders may submit bids but cannot be awarded a contract unless they first obtain a supply arrangement from the Supply Arrangement Authority, a process that does not delay contract award decisions. No security is required for this procurement. The solicitation is open to pre-qualified PSIB suppliers and closes on July 17, 2026, at 3:00 PM. Interested parties must direct inquiries to Sheila Kvern, the designated point of contact, and those seeking to become pre-qualified suppliers should reach out to the designated government email for guidance on obtaining a supply arrangement.

Canadian Grain Commission

POSTED

DEADLINE

Workstations with Storage and Electrical OutletsThe Department of National Defence is soliciting bids for the supply and on-site installation of 100 industrial-grade height-adjustable workstations equipped with integrated storage towers and electrical power centers for use in a warehouse environment in Nova Scotia. Each workstation must feature a hardwood butcher block top measuring 72 inches wide by 36 inches deep with a thickness of 1-3/4 to 2 inches, an industrial steel frame capable of supporting 450 to 1,000 pounds, and electrically adjustable legs that range from 28 to 30 inches at minimum height to 45 to 48 inches at maximum height. The storage unit must include two to three drawers—one of which must be a file drawer—with maximum dimensions of 25 inches high by 16 inches wide by 18 inches deep, and both the workstation and storage components must have a matching black or grey finish. Each unit must include an integrated 110-volt outlet bar with between six and eight plugs, and all units must be assembled on-site by the contractor, who is required to remove all packaging and waste material while leaving existing assets undisturbed. A minimum one-year warranty covering both manufacturer parts and on-site labor is mandatory. Deliveries must be completed by March 31, 2027, with all items shipped FOB destination outside comprehensive land claims settlement areas, accompanied by detailed packing slips and shipping documentation. All bidders must hold a valid Designated Organization Screening (DOS) from the Contract Security Program of Public Works and Government Services Canada, and all personnel accessing sensitive sites must possess a valid Reliability Status clearance. Subcontracts involving security requirements cannot be awarded without prior written approval from the Contract Security Program. Contractors must comply fully with the Contract Security Manual and the Security Requirements Checklist, and are subject to continuous compliance with all certifications provided during the bidding process. Proposals must be submitted as two separate sections—Technical and Financial—via email to PDIV.BidReceivingUnit@forces.gc.ca, and must include the Offer Submission Form and Offeror Declaration Form with all required certifications. Offers must satisfy all mandatory technical criteria identified with the word “must,” or they will be deemed non-responsive. The contract will be awarded to the lowest-priced compliant offer, with prices quoted in Canadian dollars excluding taxes, which will be billed separately. The contractor is responsible for environmentally preferable packaging that is reusable, returnable, or recyclable, with exceptions for packaging tape and specialized materials. In

Department of National Defence

POSTED

DEADLINE