Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

RIVET, BLIND

Active
SPE4A6-26-T-10AHFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of one blind rivet, identified by NSN 5320-00-451-9167, under solicitation SPE4A6-26-T-10AH, issued by the ASC Commodities Division of the Department of Defense. The item is classified as a commercial item and must comply with applicable military or consensus non-government part standards, with hardware manufactured after the solicitation date required to adhere to the current revision of the governing standard. Past production to prior revisions remains acceptable. Technical and quality requirements referenced by R or I numbers are incorporated via the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation issue or award date depending on acquisition size. Packaging must meet DLA requirements, and any non-accepted supplies must have government identification removed. Mercury or mercury-containing compounds are prohibited from intentional addition or direct contact with the hardware, except for functional uses in batteries, fluorescent lights, specified instruments, sensors, controls, weapon systems, and NAVSEA-approved chemical reagents. Portable fluorescent lamps and instruments containing mercury must be shockproof and feature a secondary containment boundary per NAVSEA 5100-003D. The delivery timeline is 224 days after order, with performance designated at Hill AFB, Utah, and responses due by August 5, 2026. The solicitation is fully competitive under federal specification and is open to all eligible suppliers through the DIBBS procurement portal.

General Info

One blind rivet procured under DOD solicitation, must meet military standards, no mercury except exemptions, delivery in 224 days.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332510 - Hardware ManufacturingView NAICS

Place of Performance

7537 WARDLEIGH RD, HILL AFB, UT, 84056-5734, US

Set-Aside

NONE

Documents

(1)

SPE4A6-26-T-10AH.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
Christina Pyle
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
RIVET,BLIND
RIVET, BLIND
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
THIS ITEM IS IDENTIFIED AS A COMMERCIAL ITEM (TO INCLUDE 'COMMERCIAL
OF A TYPE')
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
THIS ITEM IS DEFINED BY EITHER BY A MILITARY PART STANDARD, OR A PART
STANDARD PUBLISHED BY A CONSENSUS NON-GOVERNMENT STANDARDS ORGANIZATION.
HARDWARE MANUFACTURED TO THE CURRENT REVISION OF THE PART STANDARD
DEFINING THIS ITEM IS ACCEPTABLE.
HARDWARE MANUFACTURED IN THE PAST TO A PREVIOUS, BUT THEN CURRENT,
REVISION OF THE STANDARD IS ACCEPTABLE.
ANY HARDWARE MANUFACTURED FROM THE DATE OF THIS SOLICITATION FORWARD,
SHALL BE MANUFACTURED IN ACCORDANCE WITH THE CURRENT REVISION OF THE
PART STANDARD IN QUESTION.
THIS NSN IS PROCURED AS FULLY COMPETITIVE IN
ACCORDANCE WITH A MILITARY / FEDERAL
SPECIFICATION/STANDARD. SEE NSN/Part Number: 5320-00-451-9167 Quantity: 1 HD Purchase Request: 7016677739QTY: 1 Delivery: 224 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332510
New
DIBBS
PIN, STRAIGHT, HEADEDThe item specified is a PIN, STRAIGHT, HEADED with NSN 5315-00-734-1175, quantity of 67 units, under purchase request 7015605086, with delivery required within 12 days ADO. This item is subject to strict export control regulations under either ITAR or EAR, meaning technical data associated with it cannot be disclosed to foreign persons regardless of location, including foreign national employees or subsidiaries of U.S. companies. Access to this technical data is restricted solely to DLA contractors who hold valid US/Canada Joint Certification Program certification, have completed mandatory training on handling DOD export-controlled data, and have been formally approved by the DLA controlling authority. The solicitation number is SPE4A6-26-T-10AJ, posted on July 28, 2026, with responses due by August 5, 2026. The procurement falls under NAICS code 332510 and is managed by the ASC Commodities Division of the Department of Defense, with performance taking place in Cherry Point, North Carolina, 28533-5040. Primary point of contact is Debra Fowler, reachable via email and phone listed in the contract data.
ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
DISK, SOLID, PLAINThe contract pertains to the procurement of two solid plain disks with NSN 5340-01-005-1903 under solicitation SPE7L1-26-T-882P, issued by the Department of Defense’s Land Supply Chain. Delivery is required within 20 days of award, and responses are due by August 10, 2026. The item falls under NAICS code 332510, and the solicitation is governed by DLA packaging and technical quality requirements as outlined in the DLA Master List of Technical and Quality Requirements, accessible via the provided web link. All technical and quality specifications referenced by R or I numbers are incorporated by reference and must be strictly adhered to. Sampling and inspection protocols must comply with MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based sampling plan, with the manufacturer allowed to choose attribute or variable inspection methods unless otherwise directed. Critical, major, and minor attributes must be verified at levels VII, IV, and II respectively, or with AQLs of 0.1, 1.0, and 4.0; any unspecified attributes are deemed major. Acceptance criteria require zero non-conformances in the sample lot under MIL-STD-105/ASQ Z1.4 unless the contract specifies otherwise. Government identification must be removed from non-accepted supplies, and all provisions are subject to the revision of the DLA Master List in effect at the relevant solicitation or award date. Contact for inquiries is Michael Nordahl at dla.flbc2prs@dla.mil or 445-737-0596.
LAND SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332510
New
DIBBS
HANDLE, EXTENSIONThe contract involves the procurement of a HANDLE, EXTENSION with part number B300-264-19/2 and NSN 5340-01-352-9560, for a quantity of six units, to be delivered within ten days to a military installation in Illgesheim, Germany. All items must be shipped FOB origin with zero variance in quantity and inspected and accepted at the destination. Packaging and marking must comply with commercial standards as specified for medical acquisitions, superseding MIL-STD-129 in favor of Medical Marking Standard No. 1, which dictates unique labeling requirements to ensure traceability and compliance. Each unit must be sealed in protective packaging and enclosed in durable commercial shipping containers suitable for carrier transport at the lowest cost. Wood packaging materials are required to be heat-treated or kiln-dried in accordance with DoD regulations, and all shipments must adhere to DLA’s packaging guidelines as referenced on their official site. The contract is issued under solicitation SPE7L1-26-T-882X, with a response deadline of August 10, 2026, and a required delivery date of July 24, 2026. The primary point of contact for the acquisition is Kristina Derry, and the unit of issue is each, priced at $6.00 per unit. The end recipient is the Air DSSA AWCF SSF at Storck Barracks, Building 6503, with additional shipment instructions governed by DLA procedural notes C19 and C20.
LAND SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332510
New
DIBBS
HOUSING, GALILEAN EYEPIThe contract is for one unit of a Galilean eyepiece housing, identified by NSN 2040-01-317-1452 and part number 685B012544, supplied by Kollmorgen Corp. and L3 Technologies, Inc. with CAGE code 34228. Delivery is required within 20 days to the Trident Refit Facility at Kings Bay, Georgia, with shipment FOB origin and inspection and acceptance occurring at the destination. The item is classified as a critical application, and the use of mercury or mercury-containing compounds is strictly prohibited unless explicitly exempted for functional components like batteries or specialized instruments, with additional containment requirements for portable devices. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, using approved methods and materials, while avoiding plastics where possible. The contract prohibits parcel post and requires traceable freight shipping. The purchase request number is 7017643672, and the contract number is SPE7M4-26-T-289D, with an original required delivery date of July 24, 2026. All technical and quality requirements are governed by the DLA Master List, with specific provisions for environmental compliance and marking. The point of contact is Rory O'Reilly, and the solicitation closed on August 10, 2026.
FLUID HANDLING DIVISION

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332510
New
DIBBS
BRACKET, VEHICULAR CThe contract is for the procurement of five units of BRACKET, VEHICULAR C with NSN 2590-01-583-1193 and part number 3801940 from OSHKOSH DEFENSE LLC, under solicitation SPE7L0-26-T-0386. Delivery is required within five days FOB origin at a unit price of $5.00, totaling $25.00, with no variance allowed in quantity. All items must comply with the DLA Master List of Technical and Quality Requirements, which override any conflicting specifications, including ASTM D3951, and packaging must adhere strictly to MIL-STD-129 and RP001 packaging standards. Ozone-depleting chemicals are strictly prohibited, and any substitute materials require prior approval unless explicitly authorized by the specification. Packaging must be marked and labeled in compliance with DLA requirements, with palletization following RP001 guidelines. The product must be shipped by the fastest traceable means, excluding parcel post, to the designated delivery point at DLA LMP Zone 1, Building 552, Texarkana, TX. The required delivery date is July 29, 2026, and the item is to be inspected and accepted at the destination. Government-use identifiers and tracking codes such as W45G18, TCN W45G18620500XF, RDD 244, and PROJ TP 1 are encoded for logistics and accountability purposes.
LAND SUPPLY CHAIN ESOC BUYS

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332510
New
DIBBS
CLAMP, BLOCK, SECTIONThis contract pertains to the procurement of two units of CLAMP, BLOCK, SECTION with NSN 5340-01-356-7179, under solicitation SPE7L1-26-T-884D, with a response deadline of August 10, 2026, and a delivery requirement within five days after delivery order issuance. Full and open competition applies, and the work falls under NAICS code 332510 with the Department of Defense’s Land Supply Chain as the contracting agency. Compliance with cybersecurity requirements mandates that the vendor be a CMMC Level 2 certified Third-Party Assessment Organization, ensuring adherence to specified security controls. The contract incorporates technical and quality standards from the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation or award date depending on acquisition size. Packaging, handling, and disposal of supplies must align with DLA directives, and government identification markings must be removed from non-accepted items. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute materials must be pre-approved unless explicitly authorized by the specification. Technical data associated with this item is subject to export controls under ITAR or EAR, requiring prior government authorization for any transfer to foreign persons or entities, whether inside or outside the U.S., and DFARS 252.225-7048 governs its handling. Contractors must hold a valid US/Canada Joint Certification Program certification, complete mandatory DOD export control training, and obtain DLA approval prior to accessing controlled technical data. The point of contact for inquiries is Kristina Derry, reachable via email and phone provided in the contract data.
LAND SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332510
New
DIBBS
RIVET, BLINDThe contract is for the procurement of 2 units of RIVET, BLIND with NSN 5320-01-006-2154 under solicitation SPE4A7-26-T-598E, issued on July 28, 2026, with responses due by August 5, 2026. The item is classified as a commercial item and conforms to a military or consensus non-government part standard, allowing hardware manufactured to any prior current revision of the standard to remain acceptable, though all future production must meet the latest revision. No shelf life applies, and item unique identification is not required per DFARS 252.211-7003(c)(1)(i). Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with a zero-defect acceptance criterion unless otherwise stated; attributes are assigned verification levels VII, IV, and II for critical, major, and minor characteristics respectively. Packaging and marking must comply with DLA requirements including removal of government identification from non-accepted supplies and physical identification of bare items. Technical and quality standards referenced by R or I numbers are governed by the DLA Master List, with revisions controlled by the solicitation issue date for simplified acquisitions or the RFP issue date for larger ones. Delivery is required within 10 days after award to Clackamas, Oregon, and inquiries should be directed to Brad Ingram at the Defense Logistics Agency. The solicitation is fully competitive under a federal specification, and covered defense information may apply.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
PLUG, MACHINE THREADThe contract is for one machine thread plug with NSN 5365-01-180-6745, identified by purchase request 7017607599, under solicitation SPE4A0-26-T-4073, with a required delivery in five days by July 23, 2026. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation or award date depending on acquisition type. The product must comply with DLA packaging standards per RP001, including MIL-STD-2073-1E for preparation, MIL-STD-129 for marking, and specific packaging codes indicating preservation method 33, dry storage, and use of unit packaging with no intermediate containers. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and unspecifed attributes are treated as major. The item must be marked per MIL-STD-129 with no special markings, palletized according to DLA guidelines, and shipped FOB origin with no quantity variance allowed. Delivery is to Prince Sultan Air Base, Saudi Arabia, with transportation governed by DLA procedural notes C19 and C20. The point of contact is Danita Davis, and the unit of issue is each, with government use codes indicating procurement and distribution routing.
AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
COVER, ACCESSThe contract specifies the procurement of one unit of a cover and access item identified by NSN 5340-12-359-4324 and part number 868201001 under solicitation SPE7L1-26-T-884H. The delivery must occur within five days of award, FOB origin, with no tolerance for quantity variance. Inspection and acceptance both occur at the destination, and the item must be packaged in strict compliance with DLA’s Master List of Technical and Quality Requirements, which override general industry standards like ASTM D3951. If the item is hazardous per Fed-Std-313, it must meet TQ requirement IP025; if non-hazardous, it must be commercially packaged under ASTM D3951 while still adhering to DLA’s higher-priority specifications. All packaging must be labeled per MIL-STD-129, and palletization must follow RP001 guidelines. The item must be shipped traceably via freight to Fort Hood, Texas, using the specified destination address and must not be sent via parcel post. The required delivery date is July 27, 2026, and the contract is administered by the Department of Defense’s Land Supply Chain through the DLA, with Michael Nordahl listed as the primary point of contact. Government-use codes and shipment identifiers are included for internal tracking and logistics.
LAND SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332510
New
DIBBS
COLLAR, PIN-RIVETThe contract is for 328 units of a threaded pin-rivet collar, identified by NSN 5320-00-631-3429, under solicitation SPE4A6-26-T-10AF issued by the Defense Logistics Agency’s ASC Commodities Division. Delivery is due 256 days after contract award, with responses due by August 5, 2026. The item falls under NAICS code 332510 and is procured for performance at New Cumberland, Pennsylvania. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. The item is subject to export control under ITAR or EAR, prohibiting unauthorized disclosure of associated technical data to foreign persons, including employees and subsidiaries, with access limited to contractors certified under the US/Canada Joint Certification Program, who have completed required DLA training and obtained approval. CMMC Level 2 certification is mandatory for third-party assessors, and DLA packaging standards apply. Inspection and acceptance occur at the manufacturer’s origin, and government identification must be removed from non-accepted items. Item Unique Identification is not required per customer request, and DFARS 252.211-7003(c)(1)(i) governs marking. Bare item marking and physical identification requirements are enforced. The sole point of contact is Susan Barlow, with email and phone provided for inquiries.
ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
HANDLE, MANUAL CONTROL
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 4 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332510
New
DIBBS
RETAINER, NUT AND BOLT
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 4 hours ago

DEADLINE

in 15 days
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 332722
New
DIBBS
BOLT, SHEARThe contract is for the procurement of 33 shear bolts identified by NSN 5306-01-058-0729 and part number MS21296-07011 under solicitation SPE4A6-26-T-09YW. All items must comply with stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, including specific standards for inspection, packaging, marking, and dimensional control such as MIL-STD-130 for identification, ASME Y14.5 for tolerancing, ASME B46.1 for surface texture, and AS8879 for screw threads. The item is classified as a critical application and must meet zero non-conformance acceptance levels under sampling plans aligned with MIL-STD-1916 or ASQ H1331, with attributes assigned verification levels VII, IV, and II for critical, major, and minor characteristics respectively. Packaging must conform to ASTM D3951 and MIL-STD-129, with palletization adhering to DLA’s RP001 guidelines. Item Unique Identification is not required per customer request, and government markings must be removed from non-accepted items. Inspection and acceptance occur at origin, with no variance allowed in quantity. Delivery is FOB origin with a required delivery date of October 4, 2026, and a need ship date of November 15, 2026. All items must be delivered to DLA Distribution San Diego at the specified address, and transportation logistics follow DLAD procedural notes. The unit price is $33 per piece, totaling $1,089.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, MACHINEThe contract is for the procurement of 95 machine screws identified by NSN 5305-00-061-8243 and part number MS24693C288, classified as a commercial item. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation issue date or amendment, and compliance with MIL-STD-1916 or ASQ H1331 sampling protocols is mandated unless otherwise directed, requiring zero non-conformances in the sample lot unless specified otherwise. All items must adhere to MIL-STD-130N for marking, with additional requirements for physical identification and removal of government identification from non-accepted supplies. Packaging must follow ASTM D3951 and MIL-STD-129, with palletization compliant with DLA packaging standards, overriding any conflicting specifications. Delivery is due within 20 days from the contract award, with FOB origin terms, inspection and acceptance occurring at the destination, and no quantity variance allowed. The shipment must be sent via traceable means, explicitly prohibiting parcel post, and delivered to Edwards Air Force Base, California, with specified freight and parcel addresses provided. The solicitation number is SPE4A6-26-T-09ZJ, with a response deadline of August 5, 2026, and the original required delivery date set for July 21, 2026. The Contract Line Item Number (CLIN) and purchase request are 7017589192 and 0001 respectively, with a unit price of $95.00 totaling $9,025.00. The unit of issue is each, and all documentation must align with DoD standardized formats. Identification and tracking are further governed by government-specific codes, and compliance with covered defense information protocols may apply. The point of contact for inquiries is Bernice Adams at DLA, and the contracting office is the ASC Commodities Division under the Department of Defense.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
New
DIBBS
CABLE ASSEMBLY, SPECIAL PURPOSE, ELECTRICAThe contract is for the procurement of 35 units of a special-purpose electrical cable assembly identified by NSN 6150-01-622-0955 and Thales part number A13089-R-042, with a firm fixed price structure and a delivery deadline of 280 days after award. The item is designated as a critical application component subject to stringent quality and security requirements, including compliance with DLA packaging standards MIL-STD-2073-1E and MIL-STD-129 for marking, with no special marking required beyond standard government specifications. Packaging must adhere to DLA’s procurement guidelines, including specific methods for preservation, wrapping, and containment using designated materials and unit containers. Inspection and acceptance occur at origin, and the supply is delivered FOB origin without variance in quantity permitted. The contract mandates adherence to technical and quality requirements referenced in the DLA Master List, with sampling procedures governed by MIL-STD-1916 or ASQ H1331, requiring zero non-conformances unless otherwise specified, and assigning verification levels of VII, IV, and II to critical, major, and minor attributes respectively. Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment is required, and physical identification of the item must be marked in accordance with RQ017. Covered Defense Information applies, and government identification must be removed from non-accepted supplies. Item Unique Identification is not required per the service customer’s direction, with DFARS 252.211-7003(c)(1)(i) governing this exception. The contract is issued under solicitation SPE4A6-26-R-XB63, and all performance and compliance obligations are bound to the version of referenced standards in effect at the time of award.

POSTED

about 4 hours ago

DEADLINE

in 15 days
View Details
New
DIBBS
TUBE, TORQUE, ACTUATIThe contract pertains to the procurement of two torque tubes for flap actuation with NSN 1680-00-438-9161, under solicitation SPE4A6-26-Q-1205, with a delivery requirement of 252 days after award. The item is subject to strict export control due to the presence of technical data regulated under either ITAR or EAR, prohibiting any unauthorized disclosure or transfer to foreign persons, including foreign nationals employed by U.S. companies or subsidiaries. Compliance with DFARS 252.225-7048 is mandatory, and only DLA contractors with an approved US/Canada Joint Certification Program certification, completion of required DOD export-controlled data training, and successful submission of the DLA Export-Controlled Technical Data Questionnaire are permitted to access this data. Additional requirements include CMMC Level 2 certification for third-party assessors and adherence to physical identification and bare item marking standards. The contract is managed by the Department of Defense’s ASC Commodities Division, with Bryan Distin as the primary point of contact, and responses must be submitted by August 10, 2026.

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332722
New
DIBBS
WASHER, FLATThe contract is for the procurement of 21,707 flat washers with NSN 5310-00-866-4418 under solicitation SPE4A6-26-T-09YV, issued by the Defense Logistics Agency’s ASC Commodities Division. The requirement is a total small business set-aside under NAICS code 332722, with responses due by August 5, 2026, and delivery expected within 127 days after order. The item is subject to stringent quality and technical requirements, including CMMC Level 2 certification for any third-party assessment, tailored higher-level quality standards for both manufacturers and non-manufacturers, inspection and acceptance at origin, and specific markings for bare items. Technical data associated with this item is governed by export controls under ITAR or EAR, restricting access and disclosure to authorized entities only, requiring compliance with DFARS 252.225-7048. Access to controlled technical data is limited to contractors approved by DLA, holding valid US/Canada Joint Certification Program credentials, and having completed mandatory DLA training and questionnaires. Packaging must meet DLA standards, and government identification must be removed from non-accepted supplies. The place of performance is New Cumberland, Pennsylvania, with Xavier Keyes designated as the primary point of contact.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335931
New
DIBBS
CABLE ASSEMBLY, SPECIALThis contract is for a special-purpose electrical cable assembly, identified by NSN 5995-01-697-5115 and part number 79356, with a quantity of 21 units, issued under solicitation SPE4A6-26-T-09ZA by the Department of Defense’s ASC Commodities Division. The item is classified as a critical application item, subject to stringent quality and technical requirements referenced from the DLA Master List of Technical and Quality Requirements, including specific provisions for packaging, inspection, and marking in accordance with MIL-STD-2073-1E and MIL-STD-129. The contract mandates zero non-conformances in sampling inspections under MIL-STD-1916 or comparable zero-based plans, with attributes assigned verification levels or AQLs based on criticality, and requires all measuring and test equipment to be properly calibrated. Deliveries must be made FOB origin within 164 days, with no quantity variance allowed and inspection and acceptance occurring at the manufacturer’s site. Packaging must comply with DLA procurement standards, including palletization and unit containment codes, and shipment must be addressed to the designated receiving warehouse in Tracy, California. The contract includes requirements for source approval documentation, removal of government identification from non-accepted items, and handling of covered defense information, along with special marking instructions indicating no additional unique identifiers are required. The original required delivery date is June 28, 2027, with a need ship date of January 17, 2027, and the unit price is $21.00 per unit, totaling a contract value of $441.00.
Current-Carrying Wiring Device Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, RADIO FThis contract specifies the procurement of three radio frequency cable assemblies identified by NSN 5995015086552 and part number 4600355, supplied by Northrop Grumman Systems Corporation. The items must be delivered within 20 days to Fort Riley, Kansas, under FOB origin terms with zero variance in quantity, and are subject to destination inspection and acceptance. Packaging and preservation must strictly comply with MIL-STD-2073-1E and MIL-STD-129, prohibiting any use of mercury or mercury-containing compounds in preservation, packaging, or marking, except for limited functional applications already defined. All packaging and unit identification must align with DLA packaging requirements and authorized unit of issue standards, with no item unique identification required per customer request. The cable assemblies are to be ship via traceable means only, excluding parcel post, and marked according to specified codes without special identifiers. The contract is issued under solicitation SPE4A6-26-T-09ZP by the Department of Defense’s ASC Commodities Division, with technical and quality requirements incorporated by reference from the DLA Master List. The delivery is for a military logistics unit at Fort Riley, and the requirement is linked to project TP 3 with a required delivery date of July 22, 2026. The contractor must adhere to all applicable defense regulations, including restrictions on hazardous materials and standardized marking, and all documentation must follow government-specific controls outlined in the contract data. The point of contact for inquiries is Katherine Zacharias, and the solicitation was posted with a response deadline in August 2026, reflecting its status as a federal procurement under NAICS code 334419.
Other Electronic Component Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332721
New
DIBBS
BOL T, MACHINEThis solicitation, SPE4A6-26-T-10AT, is a total small business set-aside for the procurement of 337 machine bolts with NSN 5306-00-180-2748, under a NAICS code of 332721, for delivery to Robins Air Force Base with a 175-day acceptable delivery order window. Offerors must not provide covered telecommunications equipment or services as defined by FAR 52.204-24 and DFARS 252.204-7016, and must comply with domestic sourcing requirements including the Berry Amendment and Buy American Act, with a reduced threshold of $150,000; non-domestic materials require explicit disclosure. Small business joint ventures must submit specific representations for eligibility under designated categories including small business, service-disabled veteran-owned, women-owned, economically disadvantaged women-owned, or historically underutilized business zone small business. Vendors must submit quantity ranges in their quotes due to fluctuating demand, as manual evaluation allows for combined or adjusted quantities without re-solicitation, though this does not apply to Auto IDC. A “No Bid” submission on DIBBS is encouraged for offerors planning to quote after the closing date to avoid assumptions of non-responsiveness. All contractors must register via DLA’s AMPS system within two months to access the Vendor Shipment Module and maintain shipping capability, with WebServices users required to update their schema per DIBBS notices. Additive manufacturing is prohibited unless explicitly approved by the contracting officer. Fast Pay is not applicable, and APEX Accelerators are available to assist businesses in navigating federal contracting at no cost. The solicitation closes on August 5, 2026, with Marchello Fields as the sole point of contact.
Precision Turned Product Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 488190
New
DIBBS
INDICATOR, LIGHTThe contract is for the procurement of three indicator, light units with NSN 6210-01-623-5179 and part number 1852-1-10-20320 from Sorensen Lighted Controls Inc, under solicitation SPE4A6-26-T-09ZS. The total quantity ordered is three units, each priced at $3.00, with delivery required within 20 days of contract award, FOB origin, and inspection and acceptance occurring at the destination. Packaging must comply with ASTM D3951, but all technical and quality requirements from the DLA Master List of Technical and Quality Requirements take precedence, and all packaging and labeling must follow MIL-STD-129. Palletization is required per DLA’s RP001 packaging standards, and the Unit of Issue and Quantity per Unit Pack must strictly adhere to contract specifications. Shipment must be made via vessel using the fastest traceable means, prohibiting parcel post, and must use the designated freight shipping address in Norfolk, Virginia. The RDD code is 777, the tracking number is V466076196GF45, and the project identifier is 478 TP 2. The origin address for delivery is also in Norfolk, referenced as V46607. The original required delivery date is July 22, 2026, and the solicitation was posted on July 28, 2026, with responses due by August 5, 2026. The contract falls under NAICS code 488190 and is managed by the Department of Defense’s ASC Commodities Division, with Lakisha Atkinson as the primary point of contact. The item is subject to Covered Defense Information protocols and requires removal of government identification from non-accepted supplies. Government-use-only fields contain classification codes for inventory, distribution, and freight control.
Other Support Activities for Air Transportation

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334417
New
DIBBS
CABLE ASSEMBLY, RADIThe item is a radio frequency cable assembly with NSN 5995-01-283-3311, with a quantity of 100 units requiring delivery within 163 days after order. This procurement is a total small business set-aside under FAR 19.5, issued by the ASC Commodities Division under the U.S. Department of Defense. The solicitation remains open until August 7, 2026, and is publicly accessible through the DIBBS system. The contract incorporates all technical and quality requirements listed in the DLA Master List, with the applicable revision determined by the solicitation issuance date. Cybersecurity compliance requires CMMC Level 2 certification by a certified third-party assessment organization, and the item is subject to covered defense information protocols. Packaging must adhere to DLA standards, and manufacturers and non-manufacturers must meet tailored higher-level quality requirements. Configuration changes require formal engineering change proposals for any deviation or waiver. All supplies must be marked per physical identification requirements, and any non-accepted items must have government identification removed. Technical data associated with this item is subject to export controls under ITAR or EAR; disclosure to foreign persons, including foreign nationals within the U.S., is prohibited without prior authorization. Access to this data is restricted to contractors with approved US/Canada Joint Certification Program status, completion of mandatory DOD export training, and formal approval by DLA.
Electronic Connector Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332991
New
DIBBS
SHOE ASSY, PLAIN CHROMEThis contract is for the procurement of four units of a Shoe Assembly, Plain Chrome Copper, identified by NSA 3110-01-224-9738, under solicitation SPE4A6-26-T-10AG. Delivery is required within 125 days of contract award to the DLA Distribution Depot in Bremerton, Washington, with shipment FOB origin and inspection and acceptance occurring at the destination. All packaging must comply with MIL-STD-2073-1E and MIL-STD-129 marking standards, and palletization must adhere to DLA packaging requirements. The item must be mercury-free, prohibiting intentional addition or direct contact with mercury or mercury-containing compounds, except for specific functional uses like batteries or instruments as defined by NAVSEA; portable fluorescent lamps and instruments containing mercury must be shockproof with a secondary containment barrier. Bearing components must originate from the United States, its outlying areas, or Canada, with domestic content exceeding 50% of total bearing component costs, and contractors must submit a declaration of domestic sourcing compliance or risk disqualification. Packaging, preservation, and marking are strictly prohibited from containing mercury or mercury compounds. The contract incorporates technical and quality requirements referenced from the DLA Master List, including tailored higher-level quality standards and measuring and test equipment specifications. Failure to provide the required bearing sourcing declaration may result in rejection of the quote. The original required delivery date is July 11, 2027, but the needed ship date is December 9, 2026, indicating urgency in the logistical timeline.
Ball and Roller Bearing Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details