Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Roof Deck Inspection and Damage Documentation

Active
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires a detailed inspection of an exposed roof deck to identify any structural damage, corrosion, or deterioration, with the sole purpose of preparing for a subsequent re-roofing project. All findings must be thoroughly documented and compiled into a formal report that is submitted to the government before any new roofing work begins. The scope is strictly focused on assessment and documentation, with no implied repair or replacement responsibilities included in this phase. This effort is classified as a subcontract under a Small Business Set Aside, ensuring eligibility restrictions apply to qualify bidders, and is governed under NAICS code 541330, indicating it falls within the professional, scientific, and technical services category. The solicitation was posted on August 5, 2026, with a firm deadline for responses on September 4, 2026, at 7:00 PM, and the contracting office is part of the Upper Colorado Regional Office under the Department of the Interior, though no specific location or point of contact is provided.

General Info

Inspect roof deck for damage, document findings, submit report before re-roofing, Small Business Set Aside, NAICS 541330.

Agency

Department Of The Interior → Upper Colorado Regional OfficeView Agency

NAICS

541330 - Engineering ServicesView NAICS

Place of Performance

UT

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

Posted

subcontract

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of The Interior → Upper Colorado Regional Office
ContactsNo contacts available
OfficeN/A
Organization / Agency
Department Of The Interior → Upper Colorado Regional Office
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Inspect exposed roof deck for structural damage, document all corrosion or deterioration, and submit formal report to government prior to re-roofing.

Similar Contracts

Same NAICS industry code

NAICS: 541330
New
SEEKING QUALIFIED SUBCONSULTANTS IN RIVERSIDE COUNTY/SOCAL TO SUPPORT WELL REPLACEMENT PROJECT WITH WATER DISTRICT
Solicitation # seeking-qualified-subconsultants-riverside-countysocal-support-well-replacement-project-water
GHD Inc. is soliciting qualified subcontractors to support the Corydon Well Replacement Design Project for Elsinore Valley Municipal Water District in Riverside County, California, with a focus on engaging Disadvantaged Business Enterprises, Small Business Enterprises, Women-Owned Business Enterprises, Minority-Owned Business Enterprises, and other eligible firms under SBA set-aside programs. The scope of work encompasses a broad range of professional services including engineering, environmental consulting, surveying, geotechnical analysis, permitting, public outreach, and utility location, aligned with NAICS codes such as 541330 and others related to architectural and engineering services, construction, and regulatory support. Interested firms must submit a qualifications package by August 7, 2026, and request solicitation documents by 5 p.m. PST on August 14, 2026, to receive full project details, with the formal response deadline for proposals set for September 15, 2026. All interactions and submissions should be directed to Charlie Brown at charles.brown@ghd.com, and performance is expected to occur within the service area of the Elsinore Valley Municipal Water District in Southern California.
GHD Inc.

POSTED

about 4 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 541330
New
Corydon Well Replacement (C2305)
Solicitation # C2305
Ardurra Group, Inc. is soliciting proposals from Disadvantaged Business Enterprise (DBE) firms to provide comprehensive design, bidding support, and engineering services during construction for the Corydon Well Replacement Project in California, under solicitation number corydon-well-replacement-c2305-1. The project entails designing a new municipal groundwater production well to replace and abandon the existing Corydon well, with work divided into two phases: Phase 1 includes technical specifications, civil site design, line-bid items for drilling and abandonment, bidding assistance, and full-time on-site construction management oversight in compliance with Riverside County and California State Water Resources Control Board requirements; Phase 2 involves detailed architectural, civil, mechanical, structural, electrical, and instrumentation and controls design drawings along with a line-item bid schedule for equipping, testing, and commissioning. The new well must meet AWWA standards, utilize a 24-inch diameter stainless steel Ful-Flo louvered screen, match existing vertical turbine equipment, tie into the Corydon Blend station and Malaga blending location, and comply with SWRCB-DDW, DWR, and EVMWD requirements. Key deliverables include a Preliminary Design Report at up to 30% design completion, review of approximately 200 submittals, assistance with a Domestic Water Supply Permit Amendment, and development of Record Drawings reflecting field changes alongside start-up and operator training support. The contract is governed by the Federal Acquisition Regulation with incorporated clauses including 2 CFR Subtitle A, Part 200, 2 CFR 1400 and 1401, DOI Standard Award Terms, and 48 CFR 52.203-17 for subawards over the simplified acquisition threshold. Respondents must complete mandatory certifications in Attachment “2,” including American Iron and Steel Certification, Debarment and Suspension Certification, SAM Information, Executive Order N-6-22 Certification, Conflict of Interest Disclaimer, Insurance Acknowledgment, Public Works Contractor Registration, and DBE Subconsultant Information. The RFP requires strict adherence to Build America Buy America Act compliance, including domestic-content documentation and waiver procedures for non-compliant materials, and prohibits procurement of equipment from Huawei or ZTE. The award will be based on demonstrated competence and professional qualifications, with evaluation factors weighted as follows: Relevant Qualifications/Experience (25%), Understanding of Project and Project Approach (25%), Scope of Work and Schedule (20%),
Ardurra Group, Inc.

POSTED

about 4 hours ago

DEADLINE

in 24 days
View Details
NAICS: 541330
New
Corydon Well Replacement Project – Professional Design, Bidding Support and Engineering Services During Construction
Solicitation # WO# C2305
The Corydon Well Replacement Project entails the design of a new municipal groundwater production well to replace and formally abandon the existing Corydon Well on Elsinore Valley Municipal Water District (EVMWD) property, with all work conducted in compliance with California State Water Resources Control Board and Riverside County regulations. The project is divided into two phases: Phase 1 focuses on hydrogeological evaluation, aquifer analysis, well design matching the existing casing depth and sanitary seal standards per AWWA guidelines, civil and site engineering for wellhead facilities, bidding assistance, and full-time on-site construction management and hydrogeological oversight during drilling. Phase 2 involves engineering design for well equipping—including architectural, structural, mechanical, electrical, instrumentation, and controls systems—alongside support during bidding and ongoing engineering oversight during construction. Technical specifications require a 24-inch diameter stainless steel Ful-Flo louvered screen compatible with local geology, and all materials must comply with the Build America, Buy America Act and domestic content requirements under 2 CFR Part 184, with documented efforts to source U.S.-produced iron, steel, and manufactured products. The project spans from initiation in November 2026 through completion in May 2028, with a contract value not exceeding $1,000,000, partially funded by a $400,000 Bureau of Reclamation grant requiring adherence to federal administrative, audit, and procurement rules under 2 CFR Part 200. Proposals must include detailed qualifications, resumes of key personnel, relevant municipal water and groundwater project experience, current California professional licensure, DBE subconsultant participation details, and a comprehensive cost proposal broken down by task with hourly rates and incidental costs. Submissions must be made through EVMWD’s PlanetBids portal by the September 1, 2026 deadline and include mandatory certifications for debarment and suspension, lobbying compliance, American Iron and Steel compliance, executive order N-6-22 sanctions screening, insurance acknowledgment, and non-collusion declarations. Evaluation prioritizes demonstrated technical competence and experience (25%), followed by understanding of project objectives (25%), schedule and risk management (20%), innovation (10%), cost value (10%), and overall proposal quality (10%), with the award based on qualifications rather than lowest cost. The consultant must provide monthly progress reports, detailed invoices, and maintain full records for four years post-final payment subject to audit. All
GEI Consultants, Inc.

POSTED

about 4 hours ago

DEADLINE

in 24 days
View Details
NAICS: 541330
New
SLED
A/E RFQ - Ballistic Aero-Optics and Materials Range Phase 2 - Bryan, Texas
Solicitation # TAMUS-RFQ-01-3489
The Texas A&M University System Office of Facilities Planning & Construction is seeking qualified Architect/Engineer firms to provide professional services for the Ballistic Aero-Optics and Materials Range Phase 2 project at the RELLIS Campus in Bryan, Texas. This solicitation, identified as TAMUS-RFQ-01-3489, is issued on behalf of the Board of Regents and seeks statements of qualifications to select a firm capable of delivering comprehensive design and engineering services tailored to the unique technical and operational demands of the ballistic range facility. Proposals must demonstrate relevant experience, technical capability, and understanding of specialized infrastructure requirements associated with high-speed testing and materials research environments. The deadline for submissions is September 1, 2026, at 8:00 PM Central Time, with the solicitation posted on August 7, 2026. Interested firms should direct all inquiries to Jeff Herring, the primary point of contact, via email at jeffery.herring@tamus.edu or by phone at 979-458-7006. The project is classified under a state and local government (SLED) procurement and will be conducted in accordance with the terms outlined in the attached A/E RFQ Information Sheet. Although no specific NAICS code or set-aside designation is provided, eligibility is open to firms meeting the qualifications outlined in the solicitation, with all work to be performed at the RELLIS Campus in Bryan, Texas.
Texas A&M University System

POSTED

about 9 hours ago

DEADLINE

in 24 days
View Details
NAICS: 541330
New
SLED
Architectural Engineering Services for Texas Department of State Health Services (DSHS) Public Health Laboratory (DPHL2)
Solicitation # 0006457
The Texas Facilities Commission (TFC) is soliciting qualified architectural and engineering firms to provide prime professional services for the design of the new Department of State Health Services Public Health Laboratory 2 (DPHL2) in Austin, Texas. The project, funded by the Texas 89th Legislature, involves the design and construction of a 220,000-square-foot state-of-the-art laboratory facility adjacent to the existing campus, comprising 200,000 GSF of BSL-1 and BSL-2 spaces for newborn screening and a separate 20,000 GSF BSL-3 facility. The estimated construction cost is $200 million, and the total project duration is anticipated to be 1,460 calendar days. Services must begin within ten calendar days of a Notice to Proceed and include full lifecycle A/E services from program development through construction administration, with deliverables such as schematic and construction documents, BIM models, energy compliance statements, and as-built records. The work requires close coordination with DSHS, TFC’s Project Management Firm (Kitchell CEM), the Construction Manager at Risk, and multiple stakeholders to deliver a technically complex, flexible, and future-ready facility supporting the state’s public health infrastructure. Proposals must be submitted electronically via the OpenGov portal by 3:00 PM on September 4, 2026, with mandatory pre-submittal teleconferences scheduled for August 18 and 19, 2026, attendance at which is required for eligibility. Submissions must include three packaged components: required documentation, VetHUB subcontracting plan materials, and scored documentation covering company information, experience, methodology, and quality assurance. Evaluation is based on a best-value approach with 70 points allocated to relevant experience and qualifications, 20 to methodology, and 10 to quality assurance, while mandatory pass/fail criteria include company information, litigation history, and a TFC-approved HUB subcontracting plan. Additional special requirements include pre-approval of key personnel, criminal background checks for all personnel, prohibition of boycotts of energy companies and firearm entities, affirmation of non-affiliation with foreign adversaries, and compliance with Texas-specific codes including CLIA, ADA, and energy conservation standards. Contract execution is planned for November 1, 2026, with award anticipated by October 15, 2026, following a potential interview process for shortlisted firms,
Texas Facilities Commission

POSTED

about 15 hours ago

DEADLINE

in 28 days
View Details

More opportunities from Department Of The Interior → Upper Colorado Regional Office

Same awarding agency

NAICS: 238210
New
Federal
J--GC26 FIRE ALARM SYSTEM REPLACEMENT
Solicitation # 140R4026R0010
The solicitation for the GC26 Fire Alarm System Replacement, identified as 140R4026R0010, is a firm-fixed-price request for proposal issued by the Bureau of Reclamation’s Upper Colorado Regional Office under the Department of the Interior, with a total small business set-aside as defined by FAR 19.5. The project involves the complete modernization and replacement of fire alarm systems at multiple locations including a powerplant, administration building, workshop, and warehouse, requiring the installation of a new Fire Alarm Control Panel, Notification Appliance Circuits, Signaling Line Circuits, an annunciation panel, and integration with existing duct detectors and elevators, all in strict compliance with NFPA 72 and independent of non-life-safety systems except where necessary for monitoring. The contract mandates adherence to a detailed specifications package spanning 282 pages, supported by 74-page drawing sets in two formats, and includes requirements for performance and payment bonds, asbestos-free materials, liability insurance, and compliance with Davis-Bacon wage determinations. All work must be conducted under an approved work sequence plan that ensures continuous fire alarm coverage during transition, with final acceptance contingent upon successful operational testing witnessed by the Government’s representative and certification by the equipment manufacturer. Proposals must be submitted in three separately packaged electronic volumes—Business, Technical, and Pricing—with each volume required to stand alone, be clearly organized, and conform to solicitation provisions including FAR and Department of the Interior supplemental clauses such as 52.203-07 Anti-Kickback Procedures, 52.225-09 Buy American Act, 52.246-21 Warranty of Construction, and WBR 1452.223-81 Safety and Health. Offerors must demonstrate at least two comparable projects within the past three years to pass a mandatory technical experience gate, after which evaluation will prioritize technical capability, schedule realism, and price reasonableness, with non-price factors significantly outweighing cost in the award decision. The Government retains strict control over site access, requiring contractor personnel to possess federal identification credentials and comply with all facility security protocols. Submission deadlines and delivery locations are governed by the extended closing date, with performance to begin within 14 days of notice to proceed and complete within 365 calendar days. Invoicing must follow the DOI-AAAP-0028 electronic payment protocol through the Invoice Processing Platform, and contractor performance will be
Electrical Contractors and Other Wiring Installation Contractors

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 811310
New
Federal
49--28007 EBFD PP AUTOMATIC GREASING SYSTEM
Solicitation # 140R4026Q0086
The contract solicitation 140R4026Q0086/0001, issued by the Bureau of Reclamation’s Upper Colorado Regional Office for an automatic greasing system at Elephant Butte Dam in New Mexico, seeks a firm fixed price solution for the installation of three systems servicing 330 lubrication points across turbine units during the restricted maintenance season from October 15 to February 15. Each system must be fully integrated with existing infrastructure, compatible with VSG Green grease, and equipped with automated controls capable of weekly and monthly lubrication cycles with manual override, alarm outputs, and shutoff valves. The contractor must demonstrate a minimum of five prior installations of wicket gate greasing systems, providing verifiable customer references, and must designate a certified safety representative trained in lockout/tagout procedures who will be present for all hazardous operations. All work must comply with OSHA, NEC70E, NFPA, and Reclamation Safety and Health Standards, with electrical power infrastructure—including 230VAC cabling, breakers, and disconnects—provided entirely by the contractor, as only 120VAC is available on-site. The solicitation mandates extensive documentation including as-built drawings in .dwg format, a commissioning plan, parts lists, warranty information, and previous experience records. Delivery is FOB destination at Elephant Butte Dam, with performance beginning September 1, 2026, and ending February 15, 2027. Payment must be submitted via the Treasury’s Invoice Processing Platform, requiring electronic submission with a signed copy emailed to Samantha Colt prior to IPP submission; reimbursement is tied to successful commissioning and acceptance at the worksite. Contractors must obtain all required permits through EBFD operations, manage waste disposal at their own expense, and adhere to strict aesthetic and safety labeling standards, including MIL-STD-129 for any radioactive components. Offerors must maintain active SAM registration with valid UEI and CAGE codes, self-certify small business status under NAICS 811310 with a $12.5 million size standard, and disclose any adverse legal or contractual history per FAR 52.209-7. Special requirements include prohibitions on contractor access to EBFD equipment, no on-site housing, and compliance with EPA BioPreferred guidelines. The evaluation prioritizes technical acceptability over price, with the lowest technically acceptable offer likely to be selected, though no formal LPTA
Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

about 20 hours ago

DEADLINE

in 6 days
View Details
NAICS: 334513
New
Federal
66--35303 EBFD OIL LEVEL SENSOR THRUST BEARING
Solicitation # 140R4026Q0095
The contract solicitation 140R4026Q0095, issued by the Upper Colorado Regional Office of the Department of the Interior’s Bureau of Reclamation, seeks four units of an Eclipse® Guided Wave Radar oil level sensor assembly for deployment at the Elephant Butte Field Division in Truth or Consequences, New Mexico. The device must meet stringent technical specifications including ±3mm measurement accuracy, operation in extreme temperatures from -100°C to +200°C under pressures up to 1,000 psi, and compliance with IP-67 enclosure ratings, intrinsic safety, explosion-proof, and non-incendive certifications. The product must match or equate to the specified model X5EB-BL1A-NCBM-NN31-ANNN2NN-014 with mandatory component part numbers and must include factory test certificates and nameplates for traceability. Delivery is required 60 days after award, with F.O.B. Destination terms placing responsibility for transport and risk on the contractor until receipt at the designated site. This is a small business set-aside procurement under NAICS code 334513, with deviations applied to several FAR clauses including 52.219-6, 52.219-28, and 52.219-33, and requires offerors to have an active UEI and CAGE code in SAM.gov while certifying small business status. Proposals must be submitted via email to Timothy Ott no later than August 7, 2026, and must include cut sheets, technical drawings, and a comparison table demonstrating compliance with all salient characteristics outlined in Sections 3.2–3.8. The evaluation will follow a trade-off approach balancing technical merit, past performance, delivery schedule, warranty, and cost, with no preference for lowest price. The contract imposes strict security requirements aligned with Bureau of Reclamation policy, mandating PIV credentials, U.S. citizenship or lawful residency for personnel, immediate reporting of access incidents, and full flow-down of security clauses to subcontractors. All invoicing must be transmitted electronically through the Treasury’s IPP platform, and no standard military packaging or marking specifications are required beyond general protective packaging guidelines. The procurement excludes the use of WAWF and does not provide a contract value due to missing pricing data in the CLIN table.
Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

about 20 hours ago

DEADLINE

in 4 days
View Details