ROTERY PUMP UNIT

The United States Coast Guard Surface Forces Logistics Center MEDIUM ENDURANCE CUTTER PRODUCT LINE has a requirement and requesting quotations for the following part: ITEM 1: NSN: 4320 01-508-8552 PUMP UNIT, ROTARY VIKING HJ75M PUMP PACKAGE. VIKING HJ PACKED PUMP WITH RELIEF VALVE. COUPLED TO 1.5 HP TEFC 1200 RPM USCG SPECIFIED MOTOR. ASSEMBLED BY VIKING. ROTARY PUMP AND MOTOR UNIT. PUMP EQUIPED WITH LIP SEALS AND RELIEF VALVE, 13 GPM, 1200 RPM, 1-1/2 HP TEFC ELECTRIC MOTOR 120 VAC. PP&M REQUIREMENTS: EACH PUMP OR PUMP UNIT SHALL BE INDIVIDUALLY PACKAGED IN ITS OWN WOODEN CRATE. EACH PUMP OR PUMP UNIT WILL BE WRAPPED IN A CLEAR PLASTIC BAG AND WILL CONTAIN DESSICANT PACKS. EACH PUMP OR PUMP UNIT SHALL BE BOLTED TO THE BOTTOM INSIDE OF THE CRATE. THE CRATE SHALL BE CONSTRUCTED IN SUCH A MANNER AS TO PREVENT THE PUMP FROM SHIFTING WITHIN. THE CRATE SHALL BE CAPABLE OF PROTECTING THE PUMP FROM DAMAGE DURING MULTIPLE SHIPMENTS BY COMMERCIAL CARRIER. MARKINGS SHALL BE CLEARLY VISIBLE, AND THE LARGEST SIZE PRACTICAL FOR THE PACKAGE SIZE. APPLICATION: USED FOR SHIPS SERVICE GENERATOR PRE-LUBE OIL PUMP ON COAST GUARD 270'WMEC CLASS CUTTERS. PLEASE ENSURE ASSETS ARE INDIVIDUALLY PACKAGED IAW ASTM-D-3951 AND MARKED IAW SP-PP&M-001 FOR PHYSICAL AND MECHANICAL HANDLING. MFG NAME: VIKING PUMP INCORPORATED PART_NBR: HJ75M Quantity: TEN (10) PLEASE ENSURE ASSETS ARE INDIVIDUALLY PACKAGED IAW ASTM-D-3951 AND MARKED IAW SP-PP&M-001 FOR PHYSICAL AND MECHANICAL HANDLING. The items are used on various US Coast Guard vessels. All items will be individually packaged and bar-code in accordance with Coast Guard specification IAW SP-PP&M-001. Inspection and acceptance shall take place at Destination after verification of preservation, Individual packaging and marking requirements and confirmation of no damage during transit. Failure to comply with packaging requirements will result in rejection and nonpayment. Delivery shall be F.O.B. Destination to USCG Surface Forces Logistics Center, Baltimore MD. Required Delivery date: SEPTEMBER 10, 2015 or Sooner This is a combined synopsis/solicitation for a commercial item prepared in accordance with the format outlined in FAR Subpart 12.6, FAC 2005-75 (June 2014) and as supplemented with additional information included in this notice. This announcement constitutes the only solicitation. Quotations are being requested and a written solicitation will not be issued. The NAICS code for this solicitation is 333996 this synopsis/solicitation is issued pursuant to FAR 6.302-1. The resultant purchase order will be awarded using simplified acquisition procedures in accordance with FAR 13 All responsible sources may submit a quotation, which if timely received, shall be considered by the Agency. Companies must have valid DUNS numbers and be registered with Central Contractor Registration (CCR) and shall provide the company Tax Information Number (TIN) with their offer. The closing date and time for receipt of quote is October 24, 2014 at _2:30_ p.m. Eastern Standard Time. OFFERORS MUST SUBMIT THE FOLLOWING INFORMATION ON THEIR QUOTE: Disclosure: The offeror under this solicitation represents that [Check one]: __ it is not a foreign incorporated entity that should be treated as an inverted domestic corporation pursuant to the criteria of (HSAR) 48 CFR 3009.104-70 through 3009.104-73; __ it is a foreign incorporated entity that should be treated as an inverted domestic corporation pursuant to the criteria of (HSAR) 48 CFR 3009.104-70 through 3009.104-73, but it has submitted a request for waiver pursuant to 3009.104-74, which has not been denied; or __it is a foreign incorporated entity that should be treated as an inverted domestic corporation pursuant to the criteria of (HSAR) 48 CFR 3009.104-70 through 3009.104-73, but it plans to submit a request for waiver pursuant to 3009.104-74. (g) A copy of the approved waiver, if a waiver has already been granted, or the waiver request, if a waiver has been applied for, shall be attached to the bid or proposal. (End of provision) The following FAR Clauses provisions apply to this solicitation. FAR 52.212-1, Instructions to Offerors-Commercial Items (JUN 2008); FAR 52.212-3, Offeror Representations and Certifications-Commercial Items (11/25/13) with Alternate I. Offeror(s) must include a completed copy of FAR 52.212-3 with their quote. The following FAR Clauses apply to this solicitation. Offerors may obtain full text versions of these clauses electronically at www.arnet.gov.; FAR 52.212-4, Contract Terms and Conditions-Commercial Items (11/25/13); FAR 52.212-5, Contract Terms & Conditions Required to Implement Statutes or Executive Orders-Commercial Items (11/25/13). The following clauses listed within FAR 52.212-5 are applicable: FAR 52.219-6 Notice of Total Small Business Set-Aside (NOV 2011)(15 U.S.C. 644), FAR 52.219-28, Post Award Small Business Program representation (JULY 2013)(15 U.S.C. 632(a)(2); FAR 52.222-3, Convict Labor (Jun 2003)(E.O. 11755); FAR 52.222-19 Child Labor-Cooperation with Authorities and Remedies (MAR 2012) (E.O. 13126); FAR 52.222-21, Prohibition of Segregated Facilities (Feb 1999); FAR 52.222-26, Equal Opportunity (Mar 2007)(E.O. 11246); FAR 52.223-18 Contractor Policy to Ban Text Messaging while Driving (AUG 2011) (E.O. 13513); FAR 52.225.1 Buy American Act-Supplies (SEP 2009); FAR 52.225-3, Buy American Act-Free Trade Agreement (NOV 2012)(41 U.S.C. 10a-10d); FAR 52.225-13, Restrictions on Certain Foreign Purchases (Jun 2008); 52.232-33, Payment by Electronic Funds Transfer-Central Contractor Registration (JUL 2013)(31 U.S.C. 3332). The following items are incorporated as addenda to this solicitation: Copies of HSAR clauses may be obtained electronically at www.dhs.gov. CGAP 3042.302-90 Valuation Requirements for the Acquisition of Spare Parts Purchased for Inventory Control Points from HQ Contracts (OCT 2008). Copies of CGAP clauses may be obtained electronically at: www.uscg.mil/acquisition/procurement/pdf/CIM_4200_19H.pdf