Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Safety Compliance and On-Site Supervision

Active

Federal

Response Deadline08/21/2026, 08:30:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires an on-site supervisor to ensure full compliance with OSHA 29 CFR 1910 and 1926 regulations as well as WAPA safety standards across all operations. Responsibilities include conducting daily safety briefings, identifying and documenting workplace hazards, and maintaining continuous oversight to promote and enforce safe work practices. The position is critical to maintaining regulatory adherence and reducing incidents through proactive safety management and real-time hazard mitigation. This is a subcontract under the SBA set-aside program, classified under NAICS code 541330, and is being managed by the Department of Energy’s Western Upper Great Plains Region. The solicitation was posted on August 6, 2026, with a response deadline of August 21, 2026, at 8:30 PM. The place of performance location has not been specified, and all work is expected to be performed at an unlisted site under the oversight of the Department of Energy. Interested parties must submit proposals before the deadline to be considered for award.

General Info

On-site supervisor required to enforce OSHA and WAPA safety standards under DOE subcontract, response due August 21, 2026.

Agency

Department Of Energy → Western Upper Great Plains RegionView Agency

NAICS

541330 - Engineering ServicesView NAICS

Place of Performance

Not specified

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 6

subcontract

Response DeadlineAug 21

Submission deadline

Response Deadline

08/21/2026, 08:30:00 PM UTCin 14 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Energy → Western Upper Great Plains Region

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Energy → Western Upper Great Plains Region

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Provide an on-site supervisor to ensure compliance with OSHA 29 CFR 1910/1926 and WAPA safety standards, including daily briefings and hazard documentation.

Similar Contracts

Same NAICS industry code

SEEKING QUALIFIED SUBCONSULTANTS IN RIVERSIDE COUNTY/SOCAL TO SUPPORT WELL REPLACEMENT PROJECT WITH WATER DISTRICT

Solicitation # seeking-qualified-subconsultants-riverside-countysocal-support-well-replacement-project-water

GHD Inc. is soliciting qualified subcontractors to support the Corydon Well Replacement Design Project for Elsinore Valley Municipal Water District in Riverside County, California, with a focus on engaging Disadvantaged Business Enterprises, Small Business Enterprises, Women-Owned Business Enterprises, Minority-Owned Business Enterprises, and other certified firms. The project requires a range of professional services including engineering, environmental analysis, surveying, geotechnical work, permitting, public outreach, and utility location, with relevant NAICS codes covering architectural and engineering services, construction, and related specialized activities. The solicitation places particular emphasis on inclusion of SBA-certified small businesses and DBEs under the Department of Transportation program, encouraging firms with these designations to submit qualifications. Interested parties must submit their qualifications package and request solicitation documents by 5 p.m. PST on August 14, 2026, with responses due no later than September 15, 2026. All inquiries and submissions should be directed to Charlie Brown at charles.brown@ghd.com.

POSTED

about 13 hours ago

DEADLINE

in about 1 month

Corydon Well Replacement (C2305)

Solicitation # C2305

Ardurra Group, Inc. is soliciting proposals from Disadvantaged Business Enterprise (DBE) firms to provide comprehensive design, bidding support, and engineering services during construction for the Corydon Well Replacement Project in California. The project involves designing a new municipal groundwater production well to replace and decommission the existing Corydon well, with work divided into two phases: Phase 1 focuses on technical specifications, civil site design, line-bid items for drilling and abandonment, and full-time on-site construction management oversight; Phase 2 covers detailed architectural, civil, mechanical, structural, electrical, and instrumentation and controls design, along with a line-item bid schedule for equipping, testing, and commissioning the new well. The well must comply with AWWA potable water standards, feature a 24-inch stainless steel Ful-Flo louvered screen, match existing vertical turbine pump systems, and tie into the Corydon Blend station and Malaga blending location, meeting all requirements from the State Water Resources Control Board, Department of Water Resources, and Elsinore Valley Municipal Water District. The consultant will prepare a Preliminary Design Report, review up to 200 submittals, assist with domestic water supply permit amendments, and develop record drawings reflecting field changes while supporting start-up, commissioning, and operator training. Proposals must demonstrate relevant qualifications and experience with utilities or government agencies, a clear understanding of the project scope, a feasible schedule with risk mitigation strategies, innovative yet practical solutions, cost transparency, and overall proposal quality. The award will be based on demonstrated competence and professional qualifications, not lowest cost. Submission requires strict adherence to formatting guidelines including a cover letter, detailed staff resumes, representative project lists, three professional references, district contract history, and a fully itemized cost proposal broken down by task. Required certifications and documentation include American Iron and Steel Compliance, Lobbying Certification, Debarment and Suspension Certification, System for Award Management information, Executive Order N-6-22 Certification, Conflict of Interest Disclaimer, Insurance Acknowledgment, and Public Works Contractor Registration—all submitted via Attachment “2.” Additionally, the contractor must comply with Build America Buy America requirements, including domestic-content certifications and waiver memoranda for non-compliant materials, and adhere to federal mandates on telecommunications restrictions, anti-trafficking, environmental recovered materials, civil rights compliance, and sanctions against Iran and Russia. The proposal submission deadline is September 1, 2026, via the PlanetBids portal, with questions due by August 2

Ardurra Group, Inc.

POSTED

about 13 hours ago

DEADLINE

Corydon Well Replacement Project - Professional Design, Bidding Support, Engineering Services During Construction

Solicitation # corydon-well-replacement-project-professional-design-bidding-support-engineering-services-during-0

The Corydon Well Replacement Project, managed by Elsinore Valley Municipal Water District, seeks professional design, bidding support, and engineering services during construction for a critical water infrastructure upgrade in Lake Elsinore, California. The scope of work encompasses full-service engineering support from initial design through construction phase, ensuring technical accuracy, regulatory compliance, and efficient project delivery. The solicitation is open to qualified firms with experience in water system engineering and is specifically set aside for Disadvantaged Business Enterprises under Department of Transportation guidelines, reflecting a commitment to inclusive contracting. The project is identified under bid/contract number C2305 and falls under NAICS code 541330 for architectural and engineering services. The solicitation was posted on August 7, 2026, with a response deadline of September 1, 2026, and is being administered by AKM Consulting Engineers, which serves as both the contracting agency and point of contact. Primary communications regarding the solicitation should be directed to Katie Neubauer via phone or email provided. Although specific address details for the office or performance location are not listed, the project’s physical performance is confirmed to be in Riverside County, California. Interested parties are encouraged to review the full solicitation details through the official SBA opportunity portal to ensure alignment with all submission requirements and eligibility criteria for DBE participation.

AKM Consulting Engineers

POSTED

about 13 hours ago

DEADLINE

Corydon Well Replacement Project – Professional Design, Bidding Support and Engineering Services During Construction

Solicitation # WO# C2305

The Corydon Well Replacement Project involves designing a new municipal groundwater production well to replace and permanently abandon the existing Corydon Well on Elsinore Valley Municipal Water District property, with full engineering and construction support services required throughout both design and implementation phases. The scope encompasses hydrogeological evaluation, aquifer analysis, well design adhering to AWWA standards and matching the existing casing depth with a 24-inch stainless steel Ful-Flo louvered screen, civil and structural site design including grading, drainage, and utility coordination, mechanical and electrical engineering for well equipping, instrumentation and SCADA systems, geotechnical and soil testing, water quality sampling, environmental permitting with SWRCB and NPDES compliance, borehole geophysical logging, and comprehensive construction management with full-time on-site oversight during drilling and equipping. The project is divided into two phases: Phase 1 focuses on technical specifications, site design, bidding support, and construction management for drilling and abandonment, while Phase 2 covers detailed architectural, mechanical, structural, and electrical designs for facility equipping, testing, and commissioning, supported by engineering services during construction. Compliance with the Build America, Buy America Act and 2 CFR Part 184 is mandatory, requiring documented sourcing of domestic iron, steel, and manufactured products, along with certification of non-collusion and adherence to federal procurement rules. The consultant must submit a cost proposal with hourly rates broken down by task, capped at a not-to-exceed amount of $1,000,000, partially funded by a $400,000 BOR Grant, with the remainder covered by non-federal sources. The solicitation requires proposers to demonstrate relevant experience in municipal groundwater projects, provide detailed resumes of proposed key personnel including licensed California professionals, and confirm current certifications including DBE, MBE, WOSB, or small business status, as the set-aside prioritizes small, disadvantaged, and minority-owned businesses. Subcontractors must also meet these certifications and be disclosed in the proposal. Required documentation includes a Conflict of Interest Disclaimer, American Iron and Steel Certification, Certification Regarding Lobbying, Debarment and Suspension Certification, SAM registration, Public Works Contractor Registration, Executive Order N-6-22 Certification confirming no ties to sanctioned Russian entities, and a California Air Resources Board Certificate of Reported Compliance. Proposals must be submitted via the PlanetBids portal by September 1, 2026, and must include a cover letter, three references, insurance

GEI Consultants, Inc.

POSTED

about 13 hours ago

DEADLINE

Engineering Services – Emergency Generator Installation for Municipal Wells (3 Sites)

Solicitation # 26-31

Murray City is seeking qualified engineering firms to provide professional services for the design, bidding, and construction support of emergency backup power systems at three municipal culinary water wells. The project, funded partly by a federal EPA Community Grant, must comply with all applicable requirements under 2 CFR Part 200 (Uniform Guidance) and has a budget of $120,000 for engineering services. The selection process involves a two-phase evaluation: Phase I includes independent scoring of Statements of Qualifications by the Selection Committee, followed by a discussion to identify the top three firms. Phase II consists of interviews with those shortlisted firms, after which scores from both phases are combined to determine the final ranking. If fewer than three qualified firms submit responses, the City will follow its code and federal regulations to determine the next steps. Submissions are due by September 7, 2026, and inquiries should be directed to Amandah Maudsley at amaudsley@murray.utah.gov. The project is located in Murray, Utah.

POSTED

about 19 hours ago

DEADLINE

in about 1 month

Forestry and Parks - Request for Proposal - ENGINEERING, DESIGN AND CONSTRUCTION ADMINISTRATION CONSULTANT SERVICES at Moose Mountain Parking Upgrades at Kananaskis Public Land Use Zone

Solicitation # AB-2026-05557

The Consultant will be responsible for reviewing and validating the Integrated Development Plan for parking area upgrades at three locations within the Kananaskis Public Land Use Zone — the Base of Moose Mountain Road, the 2 Kilometer Parking Area, and the Top of Moose Mountain Road — with total new disturbances of approximately 0.429 hectares across the sites. This includes conducting field validation of proposed improvements, refining designs based on ground conditions, constructability, environmental constraints, regulatory compliance, traffic flow, parking functionality, and operational needs, all while adhering to approved disturbance limits unless additional approval is obtained from Alberta Forestry and Parks. The Consultant must apply proven non-urban park design practices throughout all project phases, from assessment and conceptual design through detailed design, regulatory approvals, tender documentation, construction administration, and final project close-out. The work requires full engineering and design services to deliver safe, efficient, and environmentally responsible parking infrastructure upgrades, including improved traffic circulation, vehicle movement, and site access. The project must be initiated within five business days after contract execution and completed by February 28, 2028, with all design, approvals, and construction oversight delivered on schedule. The locations are precisely defined by geographic coordinates, and the Consultant must work closely with the Province to ensure alignment with all regulatory, environmental, and operational expectations. The project is managed by Alberta Forestry and Parks, with Monica Purewal serving as the primary point of contact, and the solicitation number AB-2026-05557 governs all aspects of engagement.

Forestry and Parks

POSTED

about 19 hours ago

DEADLINE

Design Phase – Bus Wash RehabilitationThe contract seeks the development of comprehensive design documentation for bus wash and steam-cleaning systems as part of a rehabilitation effort, requiring detailed concept designs, construction drawings, and technical specifications to support full implementation. The work is classified under NAICS code 541330, indicating engineering services, and is structured as a subcontract under the Georgia Transportation Efficiency Authority, with responses due by September 24, 2026. The project emphasizes precision in system design to ensure operational efficiency, durability, and compliance with facility requirements for bus maintenance infrastructure. All deliverables must align with industry standards and be tailored for use within Georgia’s transportation maintenance facilities, though specific performance locations and contact details are not provided. The solicitation was posted on August 6, 2026, and interested parties must submit proposals through the designated state portal by the deadline.

Georgia Transportation Efficiency Authority

POSTED

about 20 hours ago

DEADLINE

in about 2 months

26-0088-2 Design Engineering Consultant for Wahlstrom/Forbes Pavement & Drainage Reconstruction

Solicitation # PE-77548-NONST-2027-000000401

Chatham County is soliciting proposals from qualified consulting firms to provide professional engineering services for pavement and drainage improvements along Wahlstrom Road and Forbes Road, aiming to resolve existing drainage issues and enhance the structural integrity of the roadway. The project requires a comprehensive evaluation of the current pavement conditions and the development of targeted recommendations for resurfacing and structural upgrades capable of supporting the high volume of heavy truck traffic alongside regular passenger vehicles. The selected firm must assess existing infrastructure, identify deficiencies, and propose durable solutions that extend the service life of the roads while improving overall performance and safety. The solicitation, titled Design Engineering Consultant for Wahlstrom/Forbes Pavement & Drainage Reconstruction with number PE-77548-NONST-2027-000000401, was posted on August 6, 2026, with a response deadline of September 8, 2026. The work is to be performed within Chatham County, Georgia, and the procurement is conducted under the state’s SLED agency framework. Interested firms should submit their proposals by the stated deadline, with all inquiries directed to Sabrina Tippett at stippet@chathamcounty.org. The opportunity is open to qualified vendors with demonstrated expertise in roadway design, pavement analysis, and drainage system engineering.

POSTED

about 20 hours ago

DEADLINE

in about 1 month

Engineering and Regulatory ComplianceThe contract entails the preparation of PE-stamped engineering drawings and the full spectrum of permitting and regulatory compliance activities required for projects in Maui County, adhering strictly to the Uniform Development Code, NFPA standards, API specifications, and all applicable local ordinances. This subcontract requires expert knowledge of regional regulatory frameworks and the ability to navigate the permitting process efficiently to ensure projects meet all technical, safety, and legal requirements. The work must be executed by qualified professionals capable of producing stamped documentation that satisfies both state and county authorities. All deliverables must be completed by the response deadline of August 27, 2026, and the contract is classified under NAICS code 541330 for architectural, engineering, and related services. The contracting entity is the County of Maui in Hawaii, with no specific set-aside provisions indicated. Performance of the work is expected to occur within Maui County, and while no point of contact is listed, bidders must submit responses through the official public procurement portal prior to the deadline to be considered.

POSTED

about 21 hours ago

DEADLINE

HVAC System Design and EngineeringThe contract titled HVAC System Design and Engineering solicits comprehensive mechanical and electrical engineering services to support a major HVAC upgrade, including mechanical layout development, precise electrical load calculations, integration of building control systems, and the creation of site-specific engineering plans tailored to the facility’s needs. The scope requires expert-level technical delivery to ensure system efficiency, compatibility, and compliance with operational and safety standards. Work must be performed under a subcontract arrangement with a response deadline of September 11, 2026, and is classified under NAICS code 541330 for architectural and engineering services. The procuring entity is the California Department of Technology, representing the state of California, with no specific location details provided for performance or contact information, signaling that the project may span multiple sites or require offsite planning prior to on-site implementation.

California Department of Technology

POSTED

about 22 hours ago

DEADLINE

in about 1 month

Mechanical Design and Engineering SupportThe contract seeks mechanical design and engineering support for the replacement of HVAC systems, requiring detailed review and coordination of mechanical plans and specifications. The selected contractor will work closely with the design firm Allen & Hoshall to ensure technical accuracy, compliance, and seamless integration of new system components. This subcontract focuses on delivering expert engineering services throughout the design phase to support a large-scale facility upgrade under the oversight of the Mississippi Department of Military. The opportunity is posted under NAICS code 541330 for architectural and engineering services, with a response deadline of September 10, 2026. While the solicitation number and specific location details are not provided, the work is tied to a state military facility in Mississippi. The contract type is classified as a subcontract, indicating it is part of a broader project managed by a prime contractor or agency. There is no set-aside designation specified, and all interested parties should submit proposals by the stated deadline to be considered for participation.

MS DEPT of MILITARY

POSTED

about 23 hours ago

DEADLINE

in about 1 month

SCADA System Design and IntegrationThe contract entails the engineering and integration of a cellular SCADA system for the City of Booneville’s water system, focusing on the design of system architecture, network infrastructure, and interoperability frameworks to ensure seamless communication and operational control across water distribution components. The work requires thorough planning to align cellular communication protocols with existing water infrastructure, enabling real-time monitoring, remote control, and data acquisition without compromising reliability or cybersecurity standards. The solicitation is open as a subcontract under NAICS code 541330, administered by MPTAP through the Mississippi Department of Finance and Administration, with proposals due by September 8, 2026. The project demands technical expertise in industrial automation, wireless network deployment, and utility systems integration, with performance expected to support long-term operational efficiency and regulatory compliance for the city’s water services. While detailed location and point of contact information are unspecified, the scope is clearly defined around enabling a modern, secure, and scalable SCADA solution tailored to Booneville’s unique water system requirements.

POSTED

about 23 hours ago

DEADLINE

in about 1 month

More opportunities from Department Of Energy → Western Upper Great Plains Region

Same awarding agency

Crane and Rigging ServicesThe contract seeks qualified subcontractors to provide crane and rigging services dedicated to lifting materials to roof level, encompassing all necessary site preparation, load testing, and the deployment of certified crane operators and riggers. The scope requires full compliance with safety standards and industry best practices to ensure secure and efficient material handling during construction or maintenance operations. All personnel must be properly certified and capable of executing the work in accordance with established protocols for high-risk lifting operations. This is a subcontract under the Small Business Administration set-aside program, with a NAICS code of 238990, indicating it falls under other specialty trade contractors. The solicitation was posted on August 6, 2026, and responses are due by August 21, 2026. The contract is issued by the Department of Energy through its Western Upper Great Plains Region, with performance expected at an unspecified location within that region. Interested parties must submit their proposals through FedConnect by the stated deadline to be considered for award.

All Other Specialty Trade Contractors

POSTED

DEADLINE

Supply of 24-Gauge Galvanized Metal FlashingThe contract is for the supply of 24-gauge galvanized steel flashing material designed specifically for use with rubber roofing pavers and to withstand outdoor exposure under South Dakota’s extreme climate conditions. The material must meet stringent durability and corrosion resistance standards to ensure long-term performance in harsh weather, including freeze-thaw cycles, high winds, and heavy snow loads. The solicitation is issued as a subcontract under the SBA set-aside program, indicating preference for small business concerns, and is classified under NAICS code 423510, which pertains to building material and supplies merchant wholesalers. The posting date is August 6, 2026, with a firm response deadline of August 21, 2026, at 8:30 PM Eastern Time. The contracting entity is the Department of Energy, operating through the Western Upper Great Plains Region, although specific location details for performance or delivery are not provided. Bidders must ensure full compatibility with existing rubber roofing paver systems and adherence to material specifications for galvanization thickness, surface treatment, and dimensional accuracy. All proposals must be submitted electronically via the FedConnect portal prior to the deadline, and compliance with federal procurement standards for small business participation is mandatory.

Metal Service Centers and Other Metal Merchant Wholesalers

POSTED

DEADLINE

Roof Flashing Installation – Galvanized MetalThe contract requires the installation of 24-gauge galvanized metal perimeter roof flashing on a prefabricated Thermobond building, ensuring the flashing overlaps the existing rubber roofing pavers by 1.5 inches and is securely fastened six inches up the wall to mitigate wind uplift risks. The work must adhere to precise material and installation standards to maintain structural integrity and weather resistance at the building’s perimeter. This is a subcontract under the North American Industry Classification System code 238160, designated for roofing contractors, and is set aside for Small Business Administration participation. The solicitation was posted on August 6, 2026, with a response deadline of August 21, 2026, at 8:30 PM. The contracting agency is the Department of Energy through its Western Upper Great Plains Region, though specific location details for performance or address information are not provided. Interested parties must submit proposals through the FedConnect portal using the provided link before the deadline.

Roofing Contractors

POSTED

DEADLINE

Project Management and Prime Contractor CoordinationThe contract titled Project Management and Prime Contractor Coordination requires the successful offeror to oversee all subcontractors, ensure full compliance with federal regulations and project specifications, coordinate complex scheduling across multiple teams, and serve as the primary liaison between the government and contractors. As the prime contractor, the responsibility includes maintaining rigorous oversight of performance, timelines, and quality standards while facilitating seamless communication and resolution of issues across the project lifecycle. The role demands strong organizational leadership and a deep understanding of federal contracting protocols to ensure all obligations are met effectively and efficiently. This is a subcontract opportunity under the SBA set-aside program, classified under NAICS code 236220 for commercial and institutional building construction. The solicitation was posted on August 6, 2026, with a response deadline of August 21, 2026, and is administered by the Department of Energy through its Western Upper Great Plains Region office. The place of performance and specific location details are not provided, but the work is expected to be conducted within the region under the oversight of the Department of Energy. All responses must align with SBA eligibility requirements, and candidates must be prepared to assume full accountability for managing subcontractor activities and upholding government compliance standards throughout the contract term.

Commercial and Institutional Building Construction

POSTED

DEADLINE

Interlocking Rubber Paver SupplyThe contract involves the supply of interlocking rubber pavers measuring 2 inches by 24 inches by 24 inches in either black or brown color for installation on a new roof system. These pavers are intended for use as a protective and functional surface layer, likely to provide durability, weather resistance, and foot traffic tolerance on the rooftop. The solicitation is classified as a subcontract under the Small Business Administration set-aside program, ensuring priority consideration for small business concerns. The North American Industry Classification System code 326299 indicates the procurement falls under other rubber product manufacturing, specifically pointing to products made from rubber not elsewhere classified. The opportunity was posted on August 6 2026 with a response deadline of August 21 2026 at 8:30 PM, allowing interested vendors a two-week window to submit proposals. The contracting agency is the Department of Energy through its Western Upper Great Plains Region, though specific location details for performance or contact information are not provided. Bidders are directed to the FedConnect platform for official documentation and submission procedures.

All Other Rubber Product Manufacturing

POSTED

DEADLINE

Galvanized Metal Flashing Supply and InstallationThe contract calls for the supply and installation of 24-gauge galvanized metal flashing along the roof perimeter to mitigate wind uplift of pavers, ensuring structural integrity and weather resistance. The work is classified as a subcontract under the SBA set-aside program, with the NAICS code 238210 indicating roofing contractor services. The solicitation was posted on August 6, 2026, and responses are due by August 21, 2026, at 8:30 PM. The contracting agency is the Department of Energy operating under the Western Upper Great Plains Region, though specific location details for performance or contact are not provided. The work must be performed in alignment with federal procurement standards for small business participation, and interested parties can access full solicitation details via the FedConnect portal.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

EPDM Roofing System Installation with Interlocking PaversThe contract calls for the installation of a new roofing system using an EPDM-based membrane paired with interlocking rubber pavers to create a durable, weather-resistant surface. The system will be secured with galvanized metal flashing specifically designed to enhance wind resistance, ensuring long-term structural integrity under harsh environmental conditions. Work must be performed in compliance with industry standards for EPDM application and flashing integration, with attention to proper sealing, alignment, and adhesion to prevent leaks and premature wear. This subcontract is issued under the SBA set-aside program, targeting small business participation in federal contracting, and falls under NAICS code 238160 for roofing contractors. The solicitation was posted on August 6, 2026, with a response deadline of August 21, 2026, and is managed by the Department of Energy’s Western Upper Great Plains Region. Work is expected to occur within the region served by the agency, though precise location details are not specified. Interested parties must submit proposals through the FedConnect portal prior to the deadline to be considered for award.

Roofing Contractors

POSTED

DEADLINE

Roofing System Removal and Debris HaulingThe contract involves the complete removal of all existing roofing materials down to the underlying decking, including the transport and disposal of all resulting demolition debris offsite. This work is scoped as a subcontract under the SBA set-aside program and is classified under NAICS code 562111, which pertains to waste collection and remediation services. The solicitation was posted on August 6, 2026, with a response deadline of August 21, 2026, at 8:30 PM. The contracting office is the Department of Energy, Western Upper Great Plains Region, though specific location details for the place of performance and point of contact are not provided. All work must be conducted in compliance with federal contracting standards and debris management regulations, with the contractor responsible for ensuring safe and lawful disposal practices.

Solid Waste Collection

POSTED

DEADLINE

Roof Decking Inspection and RepairThe contract titled Roof Decking Inspection and Repair requires the inspection and repair of existing plywood decking at repeater sites to ensure a structurally sound substrate prior to the installation of new roofing. The work is critical to maintaining the integrity and longevity of future roofing systems and must be performed at multiple locations within the Western Upper Great Plains Region under the jurisdiction of the Department of Energy. All tasks must comply with industry standards for roofing substrate preparation, including identifying damaged or deteriorated decking, replacing compromised sections, and ensuring proper fastening and alignment to support the upcoming roofing materials. This is a subcontract opportunity categorized under NAICS code 236220 for Commercial and Institutional Building Construction, and it is set aside for Small Business Administration (SBA) certified concerns. The solicitation was posted on August 6, 2026, with a response deadline of August 21, 2026, at 8:30 PM Eastern Time. Interested parties must submit proposals through the FedConnect platform using the provided link, and performance will occur at unspecified repeater sites across the region. While no specific location details are listed, successful bidders will be expected to mobilize as needed to access scattered field locations and complete work in accordance with technical and safety requirements.

Commercial and Institutional Building Construction

POSTED

DEADLINE

VH STAGE 04 FITTINGS AND BUS

Solicitation # 89503426QWA001303

The contract solicitation titled VH STAGE 04 FITTINGS AND BUS seeks suppliers for Travis pattern or equal fittings to support a federal project under the Western Upper Great Plains Region of the Department of Energy. The solicitation, identified by number 89503426QWA001303, was posted on August 6, 2026, with responses due by August 20, 2026, and is designated as a Small Business Administration set-aside, encouraging participation from small businesses. The North American Industry Classification System code 332999 applies, indicating it covers other fabricated metal product manufacturing. The contracting officer, Mary Pfeifle, can be reached at pfeifle@wapa.gov for inquiries, and the office is located in Billings, Montana, with a zip code of 59107-5800. Although the specific place of performance is not detailed, the contract is linked to federal operations in the Western Upper Great Plains Region. Interested parties may access the full solicitation through the FedConnect portal.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

Elkton Repeater Spalding Repeater Roof Replacement

Solicitation # 89503426QWA001312

The contract requires the replacement of existing roofing systems at two repeater sites in Nebraska: Elkton Repeater and Spalding Repeater. It is a federal solicitation issued by the Department of Energy under the Western Upper Great Plains Region, identified by solicitation number 89503426QWA001312 and classified under NAICS code 238160 for roofing contractors. The opportunity is set aside for Small Business Administration participation. Proposals must be submitted by August 21, 2026, at 8:30 PM Eastern Time, with the solicitation posted on August 6, 2026. Performance locations are in Nebraska, though specific addresses are not listed. All inquiries and communications should be directed to Contracting Officer Curtis Richter at richter@wapa.gov. The work must be performed in compliance with federal standards, and bidders are expected to meet all technical and regulatory requirements for commercial roofing installation on federally owned infrastructure.

Roofing Contractors

POSTED

DEADLINE

Highmore Repeater Perimeter Roof Flashing

Solicitation # 89503426QWA001313

The solicitation for Highmore Repeater Perimeter Roof Flashing is issued under solicitation number 89503426QWA001313 by the Department of Energy through its Western Upper Great Plains Region office located in Billings, Montana. The contract is categorized under NAICS code 238160, indicating it pertains to roofing contractors, and is set aside for small business administration eligible entities. Interested parties must submit responses by the deadline of August 21, 2026, at 8:30 PM Eastern Time, with the solicitation posted on August 6, 2026. The place of performance is not specifically defined beyond the agency’s location, and the contract is managed by Contracting Officer Curtis Richter, reachable at richter@wapa.gov. The work involves supplying perimeter roof flashing for the Highmore Repeater facility, though exact technical specifications are not detailed in the provided data. The solicitation is accessible via the FedConnect portal for further submission guidelines and documentation.

Roofing Contractors

POSTED

DEADLINE