Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

This Government Contract opportunity from Virginia was posted on August 7, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Sanitary Waste and Vent Piping

Closed
State & Local

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 238220
New
CBP#9772 HVAC Air Handling Unit (AHU) and Ductwork Cleaning Services
Solicitation # CBP#9772
Management & Training Corporation (MTC) is soliciting bids for a fixed-price, single lump sum subcontracting opportunity, CBP#9772, to provide HVAC Air Handling Unit (AHU) and ductwork cleaning services at the Edison Job Corps Center in Edison, New Jersey. The scope of work involves the thorough cleaning of twelve AHUs and twenty-eight coils across the Kilmer and Edison Dormitories, including all associated supply, return, and outside-air ductwork. Key requirements include performing pre-cleaning inspections with photographic documentation, installing at least twelve permanent hallway ceiling access panels and larger access panels at all AHUs, and providing a final project completion report. The estimated contract value ranges from $100,000 to $250,000, with a performance period of 90 consecutive business days following a written Notice to Proceed. Bids are due by November 17, 2026, and will be awarded based on overall best value. To be considered, bidders must complete a mandatory physical site visit, submit a detailed cost breakout on MTC forms, and provide a bid bond guarantee of 20% for bids exceeding $25,000. Awarded contractors with bids over $25,000 must also provide performance and payment bonds from a surety with at least an A- rating. Compliance with Davis-Bacon prevailing wage determinations for Middlesex County and various FAR clauses is required, including business size self-certification under FAR 52.219-8 and debarment disclosure under FAR 52.209-6 for first-tier subcontracts exceeding $45,000. All work must be performed between 8:00 a.m. and 3:30 p.m. and must adhere to applicable building codes and manufacturer recommendations.
Edison Job Corps

POSTED

about 5 hours ago

DEADLINE

in 19 days
NAICS: 238220
New
Centennial Dry Sprinkler System & Compressor Replacement Services
Solicitation # centennial-dry-sprinkler-system-compressor-replacement-services
Management & Training Corporation (MTC) is soliciting bids for a fixed-price, single lump sum subcontract to provide dry-type sprinkler system and compressor replacement services at the Centennial Job Corps Center in Nampa, Idaho. The project scope involves the demolition and removal of existing failing air compressors and distribution piping networks in Building CM (Men's Dormitory), Building CW (Women's Dormitory), and Building D (Recreation). The contractor must supply and install a new, code-approved piping network and properly sized air compressor in accordance with NFPA 25 (2023 Edition) standards. All work must be completed within 30 consecutive business days following a written Notice to Proceed. Bids are due by December 1, 2026, and must be submitted via email to Sandra Clore. To be considered, bidders must be certified to provide services in the State of Idaho and must have completed a mandatory physical site visit. Required submission documents include a bid sheet with a detailed cost breakout and proof of insurance. For bids equal to or greater than $25,000, a bid bond of 20% of the base bid is required at submission, with performance and payment bonds of 100% required upon award. Award decisions will be based on overall best value and bidder responsiveness. The contract is subject to various federal regulations, including the Davis-Bacon Act, requiring adherence to prevailing wage rates for building construction in Canyon and Gem Counties. Contractors must comply with FAR clauses regarding whistleblower rights, security requirements, and the Buy American Act. Additionally, first-tier subcontractors with awards exceeding $45,000 must disclose their debarment and suspension status per FAR 52.209-6. The solicitation is set aside for HUBZone, Woman-owned, and Service-Disabled Veteran-owned small businesses.
Management & Training Corporation/Centennial Job Corps Center

POSTED

about 5 hours ago

DEADLINE

in about 1 month
NAICS: 238220
New
Dorm Hot Water Tank Replacement – Glenmont Job Corps Center – S26-006
Solicitation # S26-006
Adams and Associates, Inc. is seeking qualified mechanical and plumbing contractors for solicitation S26-006 to replace domestic hot water storage tanks and associated equipment at the Glenmont Job Corps Center in Glenmont, New York. This subcontracting opportunity involves the removal and disposal of four 505-gallon tanks and the installation of four new 500-gallon insulated storage tanks, four heat exchangers, and one bronze Bell and Gossett circulator pump in the North Dormitory. The scope of work includes all necessary piping modifications, electrical disconnections and reconnections, insulation, rigging, and the provision of temporary hot water arrangements to ensure the facility remains operational. The estimated on-site construction duration is between two and a half to three weeks. Proposals are due by November 9, 2026, at 4:00 PM ET, following a pre-proposal site walkthrough on October 29, 2026. Award decisions will be based on a weighted evaluation of price (60 percent), quality (20 percent), past performance (10 percent), and schedule (10 percent), meaning the lowest price does not guarantee selection. Contractors must comply with New York State statutory insurance requirements, including a minimum of 1 million dollars for Commercial General Liability and Automobile Liability, and must adhere to Davis-Bacon prevailing wage requirements. Required submission documents include a completed vendor questionnaire with UEI and NAICS codes, a current W-9, and applicable New York State licenses and certifications. Payment terms are Net 30 days upon completion and receipt of invoice.
Adams and Associates, Inc.

POSTED

about 5 hours ago

DEADLINE

in 11 days
NAICS: 238220
New
Roswell JCC – Male Dormitory Bldg. Water Source Heat Pump Replacement (20 units)
Solicitation # roswell-jcc-male-dormitory-bldg-water-source-heat-pump-replacement-20-units
The Career Systems Development Corporation is soliciting proposals for the total replacement of twenty ceiling-mounted water source heat pumps at the Roswell Job Corps Center Male Dormitory Building 558 in New Mexico. The scope of work involves the removal and off-site disposal of failed units and the installation of new Bosch 1-ton units or an equivalent model. The installation must include all necessary ducting, electrical work, thermostat wiring, flexible hoses, and pressure valves. Additionally, the contractor must perform plenum safety upgrades by installing smoke dampers with fusible links in all vents leading into the plenum and ensuring all materials used in the plenum are plenum-rated. All work must comply with NFPA 101, NFPA 70, and all applicable plumbing, mechanical, and building codes. This solicitation is set aside for small businesses, including VOSB, SDVOSB, WOSB, and HUBZone certified firms. The project is subject to the Davis Bacon Act Wage Determination NM20260014, requiring the submission and approval of weekly certified payroll reports prior to invoice payment. Proposals exceeding $100,000.00 require payment and performance bonding for 100% of the contract value. Submissions must include a safe work process, a detailed cost breakdown for labor and materials, equipment cut sheets, warranty information, and a proposed payment schedule. Final project deliverables include the delivery of operation manuals to the Facility Manager.
Career Systems Development Corporation

POSTED

about 5 hours ago

DEADLINE

in 8 days
NAICS: 238220
New
WOJC – Buried Domestic Hot Water (DHW) Pipe Repair
Solicitation # wojc-buried-domestic-hot-water-dhw-pipe-repair-0
Education & Training Resources is seeking quotes for a subcontracting opportunity to repair buried domestic hot water piping at the Westover Job Corps Center in Chicopee, Massachusetts. The scope of work requires the contractor to provide all labor, materials, and equipment to excavate, locate, remove, and repair compromised piping at two specific locations: behind Singletary Hall and on the east side of Harris Hall. The project involves digging trenches approximately 15 linear feet long and 8 feet deep, followed by pipe repair for lines up to 4 inches in diameter and subsequent backfilling. Deliverables include a one-year equipment and workmanship warranty, weekly certified payroll reports, and a signed punch list for project closeout. Interested bidders must submit their proposals by November 6, 2026, to Garrett Owens. A complete submission must include a detailed bid sheet with a cost breakdown, a proposed service schedule, Massachusetts licensing and credentials, certificates of insurance, and a completed vendor packet including a W-9 and SAM.gov UEI number. This is an SBA set-aside opportunity open to various small business designations. Award selection is at the sole discretion of ETR and is not based solely on the lowest bid. The contract mandates compliance with the Davis-Bacon Act, the Service Contract Act, and OSHA regulations. Additionally, bonding requirements apply based on project value, with a 100 percent payment bond required for projects exceeding 35,000 dollars.
Westover Job Corps Center

POSTED

about 5 hours ago

DEADLINE

in 7 days

AI Contract Overview

Show more

This subcontract for the City of Richmond Department of Public Utilities involves the installation of sanitary waste piping, vent piping, and related specialties. The selected contractor will be responsible for delivering a completed sanitary plumbing system, which includes the installation of sleeves and sleeve seals. The project falls under NAICS code 238220 and is managed by the Virginia Public Utilities agency. Interested parties must submit their responses by the deadline of September 8, 2026.

General Info

Richmond Department of Public Utilities subcontract for sanitary plumbing installation due September 8, 2026.

Documents

This scope was carved out of 270002193.

The full solicitation package (33 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

WTP Sanitary Sewer System Improvements

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyVirginia → Public Utilities
ContactsNo contacts available
OfficeN/A
Organization / AgencyVirginia → Public Utilities
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Installs sanitary waste piping, vent piping, and specialties for prime contractors on City of Richmond Department of Public Utilities projects. Performs installation of sleeves and sleeve seals along with sanitary waste and vent piping systems. Delivers a completed sanitary plumbing system.

More opportunities from Virginia → Public Utilities

Same awarding agency

NAICS: 332710
SLED
Welding, Fabrication, and Machine Shop Services
Solicitation # IFB 270004283
The City of Richmond Department of Procurement Services is soliciting bids under IFB 270004283 for welding, fabrication, and machine shop services to maintain and repair equipment essential to City operations. The scope of work includes machine shop services such as milling, cutting, and polishing; welding and brazing for various metals; AutoCAD services for reverse engineering and drawing creation; and mechanical services for the repair and testing of pumps, centrifuges, conveyors, valves, and compressors. Additionally, the contractor is responsible for the onsite pickup and delivery of equipment across several locations, including Water and Wastewater Treatment Plants, Pumping Stations, and CSO facilities. The contract is structured around estimated hourly quantities, including 4,500 hours for machine shop services, 4,500 hours for welding, 1,000 hours for AutoCAD, and 500 hours for logistics. The contract will be awarded to the lowest responsive and responsible bidder. Strict technical qualifications are required, including NIMS certification for machinists and AWS, ASME, or API certifications for welders. Performance standards include a regular delivery window of seven to ten calendar days and adherence to specific military specifications for paint and coating materials. Contractors must maintain comprehensive insurance coverage, including at least 1,000,000 dollars per occurrence for general and automobile liability, and 1,000,000 dollars per claim for professional liability. Bids must be submitted via the OpenGov portal by November 4, 2026, and must include all required certifications, including compliance with the Civil Rights Act of 1964 and non-discrimination policies.
Machine Shops

POSTED

27 days ago

DEADLINE

in 6 days
View Details
NAICS: 541330
SLED
Wastewater Annual Engineering Services
Solicitation # 270005936
The City of Richmond, Virginia, is soliciting proposals for on-call professional engineering services to support the Department of Public Utilities Wastewater Utility. This contract is designed to provide the City with flexible engineering support for its Capital Improvement Plan, covering the full project lifecycle including surveying, planning, design, permitting, and construction management. The scope focuses on the City's complex wastewater infrastructure, which includes a wastewater treatment plant with a wet weather capacity of 140 MGD, sanitary and combined sewer collection systems, pumping stations, and retention facilities. The selected contractors will represent the City's interests in dealings with subcontractors and suppliers while ensuring compliance with the Integrated Permit and the Chesapeake Bay Preservation Act. The contract is structured as an IDIQ-style arrangement with a maximum total value of 10 million dollars per contract term, and individual task orders capped at 2.5 million dollars each. Fees are negotiated on an hourly basis for each specific task. The agreement features a one-year base period with the option for three one-year renewals. Award selection is based on a qualification-based evaluation process, and the City places a heavy emphasis on Minority Business Enterprise and Emerging Small Business participation. Contractors must maintain comprehensive insurance coverage, including general liability, automobile liability, and professional liability of at least 1 million dollars per claim.
Engineering Services

POSTED

28 days ago

DEADLINE

in about 16 hours
View Details
NAICS: 541330
SLED
Water Annual Engineering Services
Solicitation # 270005805
The City of Richmond Department of Public Utilities is soliciting proposals for on-call professional engineering services to support its Water Utility Capital Improvement Plan. The scope of work covers the entire project lifecycle, including planning, surveying, design, and construction management for water treatment plants, distribution piping, pumping stations, storage tanks, and supporting SCADA and electrical infrastructure. The City intends to make multiple awards to firms capable of providing these services via task orders, with individual task orders capped at 2.5 million dollars and a total contract term limit of 10 million dollars. The contract consists of a one-year base term with the option for three one-year renewals. Proposals are evaluated on a points-based system focusing on staffing qualifications, team experience, project approach, knowledge of local conditions, and a commitment to Minority Business Enterprise and Emerging Small Business participation. Award selection is based on a ranking of the most meritorious qualifications, followed by sequential negotiations starting with the highest-ranked offeror. Contractors must adhere to strict insurance requirements, including general, auto, and umbrella liability, and must comply with prevailing wage laws for projects exceeding 250,000 dollars. All submissions must be uploaded as a single searchable PDF via the OpenGov portal by October 30, 2026.
Engineering Services

POSTED

28 days ago

DEADLINE

in about 15 hours
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS