Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

SCHIRMER TEAR TEST

Active
SPE2DH-26-T-5867Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Schirmer Tear Test with blue dye wicks is a medical supply item designed to measure tear production in animals, with each unit containing a box of fifty tests. The item is subject to strict packaging and marking requirements under the Medical Marking Standard No. 1, which supersedes MIL-STD-129, and all units must be sealed in containers that protect against damage or breakage. Shipping must be accomplished using commercial exterior containers that ensure safe delivery at the lowest possible rate to the designated point of delivery, with export packaging applied when necessary. The item is identified by NSN 6640-01-484-9445 and is being procured under solicitation SPE2DH-26-T-5867, with a delivery requirement of 84 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation or award date depending on the acquisition type. The purchase is for one unit, and all supplies must comply with federal procurement standards including the removal of government identification from non-accepted items. The contracting office is the Medical Supply Chain FSH under the Department of Defense, with Tina Vu as the primary point of contact.

General Info

Procure 50-test Schirmer Tear Test kits under NSN 6640-01-484-9445, delivery in 84 days, DLA compliant.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIIN FSHView Agency

NAICS

333998 - All Other Miscellaneous General Purpose Machinery ManufacturingView NAICS

Place of Performance

ATTN CL VIII MED REQ PROCES ACT, APO, AE, 09227-0000, US

Set-Aside

NONE

Documents

(1)

RFQ SPE2DH-26-T-5867 Medical Supply Chain

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIIN FSH
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MEDICAL SUPPLY CHAIIN FSH
View Agency Profile
Office AddressUS
Contacts
Tina Vu
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
SCHIRMER TEAR TEST
SCHIRMER TEAR TEST, BLUE DYE WICKS<(>,<)>
USED TO MEASURE ANIMAL TEAR PRODUCTION<(>,<)>
TEST CAPABILITY IS 50 TESTS
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS
SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED
IN A SUITABLE SEALED UNIT CONTAINER CAPABLE
OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR
BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL
EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN
NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND
SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
UNIT OF ISSUE EACH (BOX OF 50 COUNT)
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
ADEQUATE DATA FOR THE NSN/Part Number: 6640-01-484-9445 Quantity: 1 EA Purchase Request: 7017800282QTY: 1 Delivery: 84 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 333998
New
DIBBS
CALIBRATOR, AIR SAMP
Solicitation # SPE2DH-26-T-5866
The contract is for the procurement of two air sampling calibrators, identified by NSN 6640-01-583-9093, under solicitation SPE2DH-26-T-5866, with a response deadline of August 17, 2026, and a delivery requirement of 85 days after award. All units must be packaged in commercial-grade, sealed containers that protect against damage and breakage, and shipped in exterior containers suitable for safe transport via common carrier at the lowest cost to the designated delivery point in APO, ZIP 96260-5479. Packaging and marking must comply strictly with Medical Marking Standard No. 1, which supersedes MIL-STD-129, and bidders are required to provide the source and part number of the equipment being offered. Technical and quality requirements referenced in the solicitation are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date. Government identification must be removed from non-accepted supplies, and all documentation must adhere to DLA’s procurement and packaging policies for medical acquisitions. The purchasing agency is the Department of Defense, Medical Supply Chain FSH, and the point of contact is Tina Vu.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 333998
New
DIBBS
RESTRICTOR UNIT, FLU
Solicitation # SPE7M3-26-T-8147
The contract is for a single Restrictor Unit, Fluid Flow, with NSN/Part Number 4730-01-535-6415, under solicitation SPE7M3-26-T-8147, issued as a Total Small Business Set-Aside under NAICS code 333998. The item is subject to strict export control regulations under ITAR or EAR, prohibiting any disclosure or transfer of technical data to foreign persons without prior authorization from the Department of State or Commerce, including foreign nationals employed by U.S. companies or subsidiaries. Compliance with DFARS 252.225-7048 is required, and only DLA contractors with approved U.S./Canada Joint Certification Program status, completed training on handling DOD export-controlled data, and authorized access may receive the technical information. The contract mandates adherence to DLA packaging standards, removal of government identification from non-accepted supplies, and incorporates technical and quality requirements from the DLA Master List, with the applicable revision determined by the solicitation or award date. The supplier must be Cybersecurity Maturity Model Certification (CMMC) Level 2 certified as a third-party assessment organization and must deliver the item within 165 days of award to New Cumberland, Pennsylvania, with William Cain designated as the primary point of contact.
FLUID HANDLING DIVISION

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333998
New
DIBBS
FILTER ELEMENT, FLUI
Solicitation # SPE7M1-26-T-268M
The contract is for the procurement of a filter element identified by part number 45012007 and NSN 4330015446534, with a total quantity of 11 units, each priced at $11.00, under solicitation SPE7M1-26-T-268M. Delivery is required within 165 days from the contract award, with shipment to be made FOB origin and inspection and acceptance occurring at the destination. The item is classified as a critical application item and must comply with all DLA Master List of Technical and Quality Requirements, which supersede any other standards such as ASTM D3951. Packaging must adhere to MIL-STD-129 and RP001 DLA Packaging Requirements, with palletization following specified guidelines and unit packaging defined by the contract. The delivery address is DLA Distribution San Diego at 3581 Cummings Road, Building 3581, San Diego, CA 92136-3581, and transportation must follow DLAD Proc Note C19 for shipping and C20 for first destination transport. The original required delivery date is December 13, 2026, with a need ship date of February 2, 2027. The contract falls under NAICS code 333998 and is managed by the Department of Defense’s Maritime Supply Chain. All technical and quality specifications referenced are governed by the DLA Master List, with applicable revisions determined by the solicitation or award date.
MARITIME SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333998
New
DIBBS
FILTER ELEMENT, FLUID
Solicitation # SPE7M4-26-T-327J
The contract is for the procurement of 100 fluid filter elements with part number 62620-100 and NSN 4330-01-441-9264, supplied by HYDRAULICS INTERNATIONAL, INC. This is a critical application item for hydraulics, subject to stringent technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, which override any conflicting standards such as ASTM D3951. Packaging must comply with MIL-STD-129 and RP001 DLA Packaging Requirements, with all items palletized accordingly and labeled as specified. The contract mandates delivery to DLA Distribution Cherry Point in North Carolina within 148 days of award, with FOB origin terms and zero tolerance for quantity variance. Inspection and acceptance occur at the destination, and removal of government identification from non-accepted supplies is required. The unit of issue is each, with a total price based on a unit price specified in the contract line item. The required ship date is January 16, 2027, and the original delivery deadline is May 3, 2027. Transportation logistics follow DLAD Proc Note C19 for shipment and C20 for first destination, and all correspondence must reference the solicitation number SPE7M4-26-T-327J, issued by the Department of Defense’s Fluid Handling Division. Point of contact for inquiries is Blake Tushar, with email and phone provided.
FLUID HANDLING DIVISION

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333998
New
DIBBS
FILTER ELEMENT, FLUI
Solicitation # SPE7M1-26-T-268L
The contract pertains to the procurement of 828 filter elements for fluid systems under solicitation SPE7M1-26-T-268L, with a unit price of $828.00 and a total contract value of $687,384. Delivery is required within 23 days of the contract award, with FOB origin terms and inspection and acceptance occurring at the destination warehouse in Tracy, California. The NSN and part number are 4330015008628 and 5000-30149 respectively, and the item must comply with the DLA Master List of Technical and Quality Requirements, which supersede any general standards such as ASTM D3951. Packaging must adhere to MIL-STD-129 labeling and RP001 DLA packaging standards, with palletization following strict DLA guidelines. Mercury and mercury-containing compounds are strictly prohibited unless specifically exempted for functional uses in batteries, lighting, instruments, sensors, weapon systems, or specified chemical reagents, with portable devices requiring shockproof construction and a secondary containment. The contract mandates zero tolerance for quantity variance and specifies the delivery address, transportation protocols under DLAD Proc Notes C19 and C20, and a required ship date of September 13, 2026. The primary point of contact is Michael Reese of the Department of Defense’s Maritime Supply Chain, and all technical specifications are governed by the current revision of the DLA Master List as of the solicitation issue date.
MARITIME SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333998
New
DIBBS
PLUG, PIPE
Solicitation # SPE7M0-26-T-034G
The contract pertains to the procurement of a PLUG, PIPE with NSN 4730-01-473-3586 and part number 901212-12, under solicitation SPE7M0-26-T-034G. Nine units are required to be delivered within five days of award, FOB origin, with no tolerance for quantity variance. Inspection and acceptance occur at the destination point, and packaging must comply strictly with MIL-STD-2073-1E and DLA’s packaging requirements, including utilization of prescribed methods for preservation, wrapping, and containerization. Marking must adhere to MIL-STD-129 with no special markings required, and palletization must follow DLA standards. The shipment is to be sent via the fastest traceable method, explicitly excluding parcel post, to the designated government facility in Suffolk, Virginia. Mercury and mercury-containing compounds are prohibited unless specifically exempted for critical applications such as batteries, lighting, or instruments regulated by NAVSEA, and any exempted items must include secondary containment. The delivery must be completed no later than August 6, 2026, and all technical and quality specifications referenced by R or I numbers are incorporated by default from the DLA Master List of Technical and Quality Requirements. The contract is issued under the Department of Defense, with acquisition governed by federal procurement guidelines and unit-of-issue standards as defined by ANSI X12.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333998
New
DIBBS
FILTER ELEMENT, FLUID
Solicitation # SPE4A5-26-T-337A
The contract pertains to the procurement of a fluid filter element with part number 5909812 and NSN 4330016852250, supplied by Hamilton Sundstrand Corporation, classified as a critical application item. The requirement is governed by a suite of technical and quality standards referenced from the DLA Master List, including documentation protocols for source approval, packaging per MIL-STD-2073-1E and DLA packaging requirements, and labeling per MIL-STD-129 with no special marking required. Sampling and inspection follow MIL-STD-1916 or ASQ H1331, permitting either attribute or variable inspection methods, with zero non-conformances mandated unless otherwise stipulated. All units must be delivered FOB origin within 120 days of contract award, with no quantity variance allowed, and inspection and acceptance occur at the destination. Packaging must comply with DLA standards, using unit packaging code U, with intermediate containment E5 and no cushioning or drying agents. The delivery address is DLA Distribution Warner Robins at Robins AFB, Georgia, with a required ship date of March 16, 2026, and an original delivery deadline of February 25, 2027. The contract is issued under solicitation SPE4A5-26-T-337A, with a total quantity of 161 units at $161.00 per unit, and is subject to transportation directives C19 and C20 as outlined in DLA procedures.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 333998
New
DIBBS
FILTER, FLUID
Solicitation # SPE7M0-26-T-035K
This contract is for the procurement of 100 units of a fluid filter identified by NSN 4330-01-549-0853 under solicitation SPE7M0-26-T-035K, with delivery required within five days of award at origin point. The item must comply with all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, and is subject to strict prohibitions against ozone-depleting chemicals and intentional use of mercury or mercury-containing compounds, except for specific approved applications such as functional mercury in batteries, fluorescent lights, sensors, weapons systems, and NAVSEA-specified reagents; any portable equipment containing mercury must include shockproof design and a secondary containment barrier per NAVSEA 5100-003D. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129 standards with no special marking required, and palletization must follow DLA Packaging Requirements, using unit of issue EA with zero variance in quantity. Delivery is directed to the Government of Israel Ministry of Defense, with freight forwarded by InterGlb Fwrd Sv Inc Co G&B pkg Co in Jersey City, NJ, and the point of contact is Forsan Saad. The contract references approved part numbers from Robin America, Inc. and Yamaha Motor Corporation, U.S.A., and all supplies must be furnished in compliance with the approved unit of issue as defined by DoD and ANSI X12 standards. The original required delivery date is September 12, 2025, and the solicitation closed on August 20, 2026, with Grace Beck designated as the primary point of contact.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333998
New
Federal
FIBER,TRANS,4
Solicitation # SPRMM126QMG23
This contract is a Small Business Purchase Set-Aside solicitation issued under Emergency Acquisition Flexibilities for the procurement of FIBER,TRANS,4, identified by drawing number 77A126548 and CAGE code 03538. The award will be made using the Lowest Price Technically Acceptable criteria, with all proposals required to meet exact technical specifications, including compliance with MIL-STD-130 Rev N for marking and MIL-STD-2073 for packaging. Contractors must be authorized distributors of the original equipment manufacturer, providing documented proof of authorization with their offer. The solicitation mandates electronic submission of invoices and receiving reports via PIEE-WAWF, and requires adherence to mandatory workflow systems and procurement protocols, including use of the WFP Mod Assist module. All contractual documents are considered issued upon electronic transmission, and failure to comply with submission protocols or to declare exceptions may result in award based solely on solicitation terms. Manufacturers or suppliers must provide the OEM’s CAGE code and part number if not the original producer, and any design, material, or part number changes require prior written approval from the NAVICP-MECH Contracting Officer with code-specific justifications and a $250 administrative fee unless it is a Code 1 part number change only. Inspection responsibilities rest with the contractor, who must maintain detailed inspection records for 365 days after final delivery. Access to controlled drawings is restricted to authorized Data Custodians listed on DD Form 2345 via SAM.gov, and all technical data is subject to distribution statements as outlined in OPNAVINST 5510.1, with specific handling requirements for NOFORN and controlled documentation. The offer must be submitted by the deadline of July 17, 2026, and vendors are encouraged to register for PIEE EDA and notify NAVSUP WSS for automated contract updates. Performance must occur at the designated facility unless a formal, approved change is granted, and failure to meet all requirements may lead to rejection or cost deductions on post-award modifications.
SPRMM1 DLA Mechanicsburg

POSTED

2 days ago

DEADLINE

in 1 day
View Details
NAICS: 333998
New
Federal
FILTER ELEMENT, FLUID - NSN 4330-01-458-6214 - Project CM26036002
Solicitation # SPE7MX26RX063
The contract is for the procurement of Filter Element, Fluid with NSN 4330-01-458-6214 under a Firm-Fixed Price Indefinite Delivery Contract with a three-year base period and two one-year option periods, utilizing FAR Part 12.201 procedures as the item is classified as commercial. The acquisition is set aside exclusively for Service-Disabled Veteran-Owned Small Businesses with a size standard of 700 employees, and the Buy American Act applies. The estimated annual demand is 884 units, with a requested delivery time of 44 days after issuance of each delivery order, and no deliveries are permitted prior to the submission of a DD Form 1155. The sole approved source is LAWRENCE FACTOR, INC. with part number X53248, and shipments are FOB origin with delivery to destination as specified in individual orders. Responses must be submitted via the DIBBS system using a scanned SF1449 form or by email to kyle.blazek@dla.mil, with no hard copies available. The solicitation was posted on August 7, 2026, with responses due on September 11, 2026, and evaluation will consider price, delivery, and performance, with all offers required in English and U.S. dollars.
DLA Land And Maritime

POSTED

2 days ago

DEADLINE

in about 1 month
View Details
NAICS: 333998
New
Federal
PIN
Solicitation # N0038326QTC28
The contract is a solicitation issued by the Navy Supply Systems Command Weapon Systems Support under solicitation number N0038326QTC28, targeting the NAICS code 333998 for miscellaneous manufacturing. The solicitation was posted on August 7, 2026, with responses due by September 8, 2026, and is administered from Philadelphia, Pennsylvania. The primary point of contact is Destiny N. Wiatr, reachable via email at Destiny.n.wiatr.civ@us.navy.mil and telephone at 771-229-0606. The contract mandates adherence to various federal compliance requirements including Buy American provisions, security exclusions, equal opportunity for workers with disabilities, and the mandatory use of Workflow Pro’s Assist Module. It specifies strict protocols for document issuance, recognizing government issuance upon electronic transmission or mail delivery, and accepts early or incremental deliveries. Contractual obligations are tied to the use of Wide Area Workflow for payment processing, with invoice and receiving report details pending. A notice of priority rating for national defense and emergency preparedness is also affixed, reinforcing the critical nature of the procurement. Additional clauses govern royalty information, annual representations and certifications, and the release of offeror information under Navy use of AbilityOne contractor provisions.
Navsup Weapon Systems Support

POSTED

2 days ago

DEADLINE

in about 1 month
View Details
NAICS: 333998
New
Federal
PLUG
Solicitation # N0038326QTC31
The contract solicitation titled PLUG, identified by solicitation number N0038326QTC31, is issued by the Navy Supply Systems Command Weapon Systems Support under the Department of Defense, with the primary office located in Philadelphia, Pennsylvania. It is classified under NAICS code 333998 and is open for response until September 8, 2026, with proposals required to be submitted before 8:30 PM EDT. The contract emphasizes mandatory compliance with multiple federal regulations including Buy American Act provisions, security prohibitions, equal opportunity requirements for workers with disabilities, and the mandatory use of Workflow Pro’s Assist Module for payment and reporting. Electronic submission and transmission of contractual documents via email or other electronic methods are officially recognized as issuance by the government, and early or incremental deliveries are preferred. The contracted work is tied to national defense and energy programs, with a priority rating in effect. The primary point of contact is Destiny N. Wiatr, reachable via email at DESTINY.N.WIATR.CIV@US.NAVY.MIL and telephone at 215-697-3528, with additional references to Navy-specific workflows and payment instructions under the N00383 billing code. The contract also incorporates long-standing provisions on royalty information, item unique identification, and the release of offeror data under Navy-specific compliance frameworks.
Navsup Weapon Systems Support

POSTED

2 days ago

DEADLINE

in about 1 month
View Details

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIIN FSH

Same awarding agency

NAICS: 339112
New
DIBBS
BEAKER, LABORATORY
Solicitation # SPE2DH-26-T-5884
The contract specifies the procurement of 250 milliliter laboratory beakers made of polypropylene, sold in packages of 50 units per pack, with a total quantity of one package. These beakers are autoclavable up to 250 degrees Fahrenheit or 121 degrees Celsius and feature dual graduations in milliliters and ounces. They are engineered for high resistance to strong acids, organic solvents, and common laboratory reagents, ensuring durability under demanding chemical conditions. The product is identified by NSN 6640-01-020-2755 and is subject to technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation issue date or award date. Packaging must comply with DLA requirements for medical acquisitions, including commercial packaging standards, sealed unit containers to prevent damage, and shipping containers suitable for safe transport at the lowest carrier rate. All items must be marked according to Medical Marking Standard No. 1, replacing prior MIL-STD-129 specifications. The contract also includes provisions for the removal of government identification from non-accepted supplies and applies covered defense information standards. Delivery is required within 20 days after order, with the solicitation issued under SPE2DH-26-T-5884, originating from the Department of Defense’s Medical Supply Chain FSH, and directed for performance in Jacksonville, North Carolina, with Tina Vu serving as the primary point of contact.
Surgical and Medical Instrument Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339113
New
DIBBS
ROBE, DRESSING
Solicitation # SPE2DH-26-T-5875
The contract is for a premium collarless patient examination robe designed for unisex use in size X Large, constructed from poly/cotton fashion poplin fabric with long sleeves, a large hang loop, and a detached belt featuring extra-large loops for enhanced adjustability. The robe includes two large inset pockets and a left breast pocket, with contrasting piping detailing and a navy color scheme. It measures 47.75 inches in length and 64 inches in sweep. The item is packaged in quantities of 12 per package, with a total purchase requirement of two packages. The National Stock Number is 6532-01-706-3685, and delivery is required within 20 days of award. All supplies must comply with DLA packaging requirements and technical/quality specifications referenced in the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date. Government identification must be removed from non-accepted supplies per RQ011. The solicitation, identified as SPE2DH-26-T-5875, was posted on August 9, 2026, with responses due by August 17, 2026, under NAICS code 339113, managed by the Department of Defense’s Medical Supply Chain FSH, with performance to be delivered to APO 09094-3219, and primary point of contact being Tina Vu at DLA.
Surgical Appliance and Supplies Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 333248
New
DIBBS
SAMPLING KIT, WATER
Solicitation # SPE2DH-26-T-5870
The contract is for the procurement of two sampling kits designed for water quality assessment, specifically targeting the collection and analysis of insect larvae and aquatic samples. Each kit includes a comprehensive set of tools: three sized dippers with strainers, a debris separator tray, two 250 mL sample jars, a permanent marker, a 500 mL wash bottle, a flashlight, a notepad, a 50 mL aquatic pipette, three 3 mL pipettes, and gloves. The unit of issue is a single kit, and the items are standardized under NSN 6640-01-699-3719. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with compliance tied to the revision in effect at the time of solicitation or award. Packaging must meet DLA procurement standards, and non-accepted supplies must have government identification removed prior to return. The solicitation, identified as SPE2DH-26-T-5870, was posted on August 9, 2026, with a response deadline of August 17, 2026. The procurement is managed by the Medical Supply Chain FSH under the Department of Defense, with performance required at Williamsburg, Virginia, ZIP 23185-5830. The primary point of contact is Tina Vu, reachable via email and phone. Delivery is required within five days of award, and the acquisition falls under NAICS code 333248, indicating classification within instruments and related equipment manufacturing. There is no set-aside type specified, and the contract is open to federal suppliers.
All Other Industrial Machinery Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339113
New
DIBBS
FLOOR MAT, MEDICAL, A
Solicitation # SPE2DH-26-T-5882
The floor mat is a heavy-duty, medical-grade absorbent pad measuring 31 inches by 40 inches, designed specifically for high-fluid surgical environments to keep operating room floors dry and safe. It is engineered to instantly adhere to flooring surfaces without sliding, shifting, or bunching during procedures, ensuring stability even under foot traffic or movement of equipment like Mayo stands and carts. The mat effectively absorbs saline, blood, vomit, urine, and other bodily fluids while remaining waterproof and leakproof, preventing cross-contamination and enhancing sanitation. Constructed with 3 liters of absorbent material per pad, it is flame resistant and features an adhesive backing that sticks firmly to the floor but does not transfer residue to surgical gloves, enabling easy and safe removal. The gray-colored pads are suitable for use in operating rooms, scrub sinks, lab stations, and veterinary clinics, meeting stringent healthcare cleanliness standards. The product is sold in cases of twenty pads each, with the unit of issue being a case. The NSN is 6530-01-727-2135 and the purchase request number is 7017719769 for a quantity of five cases. Delivery is required within 20 days of award. The solicitation, identified as SPE2DH-26-T-5882, was posted on August 9, 2026, with a response deadline of August 17, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with packaging and supply handling subject to DLA standards. The contract falls under NAICS code 339113 and is managed by the Department of Defense through the Medical Supply Chain FSH office, with performance delivery designated to Houston, Texas, 77090-6916. All inquiries should be directed to Tina Vu, the primary point of contact at Tina.Vu@dla.mil or 445-737-1120.
Surgical Appliance and Supplies Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 423450
New
DIBBS
CAP, OPERATING, SURGICAL
Solicitation # SPE2DH-26-T-5887
This item is a disposable, bouffant-style surgical cap with a 21-inch diameter, made from non-woven, fire-resistant material in blue, sized for regular/medium use. It is packaged in units of 600 caps per package and must have a mandatory 60-month shelf life that cannot be extended, with no more than nine months allowed to have passed from the date of manufacture to the date of delivery to the government. The product must be marked in accordance with the latest edition of the Medical Marking Standard No. 1, and packaging must comply with DLA packaging requirements for procurement. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Government identification must be removed from non-accepted supplies. The item is identified by NSN 6532-01-308-5341, with a single package requested under purchase request 7017790847 and required delivery within five days of award. The solicitation is issued under SPE2DH-26-T-5887, with a response deadline of August 17, 2026, and performance will occur in Williamsburg, Virginia, under the oversight of the Department of Defense’s Medical Supply Chain FSH.
Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 331313
New
DIBBS
HYGIENE KIT, PATIENT
Solicitation # SPE2DH-26-T-5880
The contract is for the procurement of 2 boxes of 12 Hygiene Kits, Patient, each box containing 12 complete units. Each unit must be sealed in a commercially appropriate container designed to protect its contents from damage or breakage, and all boxes must be packed in exterior shipping containers suitable for safe transport via common carrier at the lowest rate to the specified delivery point in Williamsburg, Virginia. Compliance with Medical Marking Standard No. 1 is mandatory, replacing all references to MIL-STD-129, and suppliers must ensure all markings adhere to this standard. The kits are governed by technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. Packaging must meet DLA’s procurement standards, and government identification must be removed from non-accepted supplies. The NSN is 6530-01-621-4282, and bidders must clearly specify the source and part number they are offering. Delivery is required within five days of award, under solicitation SPE2DH-26-T-5880, issued by the Department of Defense’s Medical Supply Chain FSH, with inquiries directed to Tina Vu at Tina.Vu@dla.mil.
Alumina Refining and Primary Aluminum Production

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 423450
New
DIBBS
TEST TUBE, BLOOD COLLEC
Solicitation # SPE2DH-26-T-5890
The contract specifies the procurement of 100 glass blood collecting test tubes with vacuum seal, each measuring 16 by 125 mm and holding 15 ml, with rubber caps and no anticoagulant, supplied in a single package unit. These tubes are nonsterile and must have a minimum shelf life of 24 months, with no more than three months elapsed between the date of manufacture and the date of delivery to the government. Labels on each unit must clearly display the NSN, manufacturer and CAGE code, date of manufacture or expiration, and the contract or lot number. Bidders are required to provide the source and part number being offered in their proposals. Packaging must comply with commercial standards as defined in the procurement document, ensuring each unit is sealed in a container that prevents damage or breakage, and all units must be packed in suitable commercial shipping containers that ensure safe, cost-effective delivery to the specified point of delivery in Williamsburg, VA. All items must adhere to Medical Marking Standard No. 1, replacing all prior references to MIL-STD-129. The NSN is 6640-00-145-1143, the solicitation number is SPE2DH-26-T-5890, and the response deadline is August 17, 2026, with delivery required within five days after award. The contracting office is under the Department of Defense, Medical Supply Chain FSH, with Tina Vu listed as the primary point of contact.
Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339114
New
DIBBS
GUTTA PERCHA POINTS
Solicitation # SPE2DH-26-T-5889
Gutta percha points for root canal therapy are specified as size 30 with a 0.04 taper, designed for use with all ISO rotary systems and hand-rolled for consistent quality. Each package contains 60 points, and the product is cadmium-free and radiopaque to ensure safe and effective use in endodontic procedures. The item is classified as a Type I CODE M item with a non-extendable shelf life of 24 months, and it must comply with DLA packaging, quality, and technical requirements as outlined in the DLA Master List of Technical and Quality Requirements. Government identification must be removed from non-accepted supplies, and bidders are required to clearly state the source and part number being supplied. The product isprocured under NSN 6520-01-533-3727 with a quantity of 10 packages, and delivery is required within 20 days of award. The solicitation, issued by the Department of Defense Medical Supply Chain FSH, has a response deadline of August 17, 2026, with primary point of contact Tina Vu. This item is subject to covered defense information requirements and must meet all applicable DLA procurement standards.
Dental Equipment and Supplies Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339114
New
DIBBS
POINT, ENDODONTIC
Solicitation # SPE2DH-26-T-5864
The contract specifies the procurement of 6 boxes of endodontic gutta-percha points, each box containing 100 units, with a 0.04 taper and color-coded blue no. 30, identified by NSN 6520-01-701-6839. The material is intended for dental use and must meet technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or award date depending on acquisition type. Packaging must comply with commercial standards, ensuring each unit is sealed in a protective container and all units are securely packed in commercial shipping containers suitable for safe delivery by common carriers at the lowest cost to Fort Hood, Texas, with delivery required within 20 days of award. All items must be marked in accordance with Medical Marking Standard No. 1, replacing MIL-STD-129, and copies of this standard are available through DLA Troop Support. The solicitation, issued under contract number SPE2DH-26-T-5864, includes tailored quality requirements for both manufacturers and non-manufacturers and mandates removal of government identification from non-accepted supplies. The procurement is federal, managed by the Department of Defense’s Medical Supply Chain FSH, with Tina Vu as the primary point of contact and a response deadline of August 17, 2026.
Dental Equipment and Supplies Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339113
New
DIBBS
PAD, HEAT TREATMENT
Solicitation # SPE2DH-26-T-5865
The product is a disposable heat treatment pad designed for instant and consistent pain relief through heat therapy, activated by simply squeezing and kneading. It is constructed with food-grade sodium acetate and non-toxic materials free of DEHP and natural rubber latex, ensuring safety for direct skin application. Measuring 6 by 9 inches, each pad is single-use and intended for disposal after one application. The unit of issue is a case of 16 pads, with storage recommended at room temperature. The product is identified by NSN 6530-01-724-0439 and is procured under solicitation SPE2DH-26-T-5865, with a response deadline of August 17, 2026, and a delivery requirement of 20 days after order award. The procurement falls under NAICS code 339113 and is managed by the Department of Defense’s Medical Supply Chain FSH, with performance at Luke Air Force Base, Arizona. Technical and quality requirements are governed by the DLA Master List, and packaging must comply with DLA standards. Removal of government identification from non-accepted supplies is also required. Point of contact for the solicitation is Tina Vu at Tina.Vu@dla.mil or 445-737-1120.
Surgical Appliance and Supplies Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 423450
New
DIBBS
WATER SAMPLING TEST RE
Solicitation # SPE2DH-26-T-5877
The contract is for the procurement of water sampling test reagents for dissolved oxygen colorimetric analysis with a testing range of 0 to 40 ppb and a reaction time of 30 seconds, supplied in unit of issue packages containing 30 items per pack, with a total quantity of 40 packs required. The item is identified by NSN 6630-01-068-5210 and is tied to purchase request 7017786150, with delivery required within 20 days after order. All packaging must comply with commercial standards as specified in the procurement document, ensuring each unit is sealed in a container that protects against damage and breakage, and all shipments must use approved commercial exterior containers suitable for safe delivery by common carrier at the lowest cost to the designated FPO address. Marking must adhere to Medical Marking Standard No. 1, superseding MIL-STD-129, with copies available through DLA Troop Support. The technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, and the applicable revision is determined by the solicitation or award date. This solicitation, identified as SPE2DH-26-T-5877, was posted on August 9, 2026, with responses due by August 17, 2026, under the NAICS code 423450, managed by the Department of Defense’s Medical Supply Chain FSH office, with Tina Vu listed as the point of contact. The requirement also includes compliance with covered defense information provisions and DLA packaging standards, with bidders required to clearly specify the source and part number being offered.
Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details