Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Semi-Annual Diesel Generator Preventive Maintenance Services

Active

Federal

Response Deadline09/08/2026, 04:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the performance of biannual preventive maintenance on Caterpillar diesel generators to ensure reliable operation in accordance with original equipment manufacturer guidelines and NFPA 110 standards. Services include comprehensive inspections, replacement of fluids and filters, thorough battery evaluations, and operational testing to verify system readiness and performance under load conditions. All work must be executed by qualified technicians with expertise in diesel generator systems and compliance with applicable safety and operational codes. The contract is designated as a subcontract under NAICS code 811310 and is issued by the US Embassy in Conakry, under the Department of State. Performance is required exclusively at the embassy's location in Conakry, Guinea, with a response deadline of September 8, 2026. The solicitation was posted on July 31, 2026, and no set-aside provisions apply. Contractors must be prepared to meet strict maintenance benchmarks to support critical power infrastructure essential to embassy operations.

General Info

Biannual diesel generator maintenance at US Embassy Conakry per OEM and NFPA 110 standards by qualified techs.

Agency

Department Of State → US Embassy ConakryView Agency

NAICS

811310 - Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and MaintenanceView NAICS

Place of Performance

CONAKRY, GN-C, GIN

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 31

subcontract

Response DeadlineSep 8

Submission deadline

Response Deadline

09/08/2026, 04:00:00 PM UTCin about 1 month

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of State → US Embassy Conakry

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of State → US Embassy Conakry

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Perform biannual preventive maintenance on Caterpillar diesel generators including inspections, fluid/filter changes, battery checks, and operational testing per OEM and NFPA 110 standards.

Similar Contracts

Same NAICS industry code

59--ROTOR POSITIONING U, IN REPAIR/MODIFICATION OF

Solicitation # N0038326RBA39

The contract solicitation for NSN 7R-5990-014606390-V2, titled "59--ROTOR POSITIONING U, IN REPAIR/MODIFICATION OF," requires the procurement of 34 units with delivery terms FOB origin. This item is flight critical and subject to strict Government source approval due to the unique design capabilities, proprietary engineering knowledge, and specialized manufacturing or repair expertise held exclusively by previously approved sources. Technical data and manufacturing processes essential to maintaining the part’s integrity are not economically available to the Government, and acquisition from alternate sources is prohibited unless they successfully qualify through formal procedures approved by the cognizant Government engineering activity. Only sources previously sanctioned by the Government have been solicited, and new sources must submit comprehensive documentation per NAVSUP WSS Source Approval Information Brochures to be considered. Proposals lacking complete required information or evidence of prior submission will be deemed nonresponsive. The Government has determined that commercial item acquisition policies under FAR Part 12 do not apply, and the timeline for new source qualification is insufficient to delay award. Offers must be submitted by the deadline of September 15, 2026, and award may proceed based on critical Fleet support needs if approval cannot be secured in time. All technical specifications and standards referenced can be accessed via ASSIST-Online or the DODSSP, while inquiries are to be directed to the designated point of contact at NAVSUP Weapon Systems Support in Philadelphia, PA.

Navsup Weapon Systems Support

POSTED

about 12 hours ago

DEADLINE

in about 1 month

Water Filtration System Maintenance and Repairs at San Angelo State Supported Living Center

Solicitation # HHS0017602

The Texas Health and Human Services Commission through its Procurement and Contracting Services division is soliciting competitive bids for as-needed maintenance and repairs to water filtration systems at the San Angelo State Supported Living Center. The solicitation, identified as HHS0017602, was posted on July 31, 2026, with responses due by August 14, 2026, at 4:30 PM Central Time. This contract opportunity is open to vendors capable of providing timely and reliable services to ensure the proper functioning of water filtration systems critical to the health and safety of residents at the facility. The place of performance is located in Texas, and all work must be performed at the specified site without exception. The contracting authority is the Health and Human Services Commission, operating under the state of Texas as a state-level government entity. Primary point of contact for inquiries regarding the solicitation is David Martinez, reachable via email at David.Martinez01@hhs.texas.gov or by phone at 512-406-2597. Additional details, including submission guidelines and requirements, can be accessed through the official procurement portal at the provided UI link. There is no set-aside designation specified for this solicitation, meaning it is open to all qualified vendors regardless of business size or ownership characteristics. Vendors are expected to respond with comprehensive proposals detailing their experience, service approach, response times, and pricing structure for both routine maintenance and emergency repairs within the specified timeframe.

Health and Human Services Commission

POSTED

DEADLINE

Warranty and Post-Delivery Service NetworkThe contract establishes a commitment to provide on-site warranty service and repair support for crawler tractors within Texas, ensuring compliance with the terms outlined in the contract warranty provisions. This includes timely deployment of qualified technicians to the location of the equipment to perform diagnostics, repairs, and maintenance as needed, with the goal of minimizing downtime and maintaining operational readiness for the equipment under warranty. The scope is strictly confined to Texas and requires adherence to specific service standards and response protocols defined in the warranty agreement. This subcontract is categorized under NAICS code 811310, which corresponds to industrial and commercial machinery and equipment repair and maintenance services. It was posted on July 31, 2026, with a response deadline of August 17, 2026, and is managed by the Comptroller of Public Accounts under the Texas agency structure. The place of performance and organizational details are unspecified, but the service must be conducted entirely within Texas. Interested parties are directed to the Texas SmartBuy portal for full solicitation details and submission requirements.

Comptroller of Public Accounts

POSTED

DEADLINE

Warranty and Field Service SupportThe contract seeks a contractor to provide warranty-backed repair, maintenance, and field service support for concrete saws used across Iowa DOT operations. This subcontract requires the vendor to deliver timely and reliable technical services to ensure the continued operational readiness of equipment, with all work backed by a warranty to guarantee quality and performance. Services must be performed across the state of Iowa, covering all necessary field locations where concrete saws are deployed for infrastructure projects. The contractor is expected to respond to service requests promptly, perform diagnostics and repairs, replace defective parts under warranty, and maintain detailed service records to meet Iowa DOT’s operational and compliance standards. The solicitation was posted on July 31, 2026, with responses due by August 21, 2026, and falls under NAICS code 811310 for commercial and industrial machinery and equipment repair and maintenance. The contract is structured as a subcontract, and while no set-aside provisions are specified, bidders must be prepared to meet all technical and logistical demands of supporting state-mandated infrastructure maintenance activities. The point of contact and exact performance locations are not listed, but services will be required statewide, and all work must align with Iowa DOT’s operational protocols. Interested parties can access additional details through the provided UI link on the Sciquest platform.

POSTED

DEADLINE

Warranty, Repair, and After-Sales Support ServicesHarris County is seeking a contractor to provide warranty service, repair, and technical support for less-lethal launchers and related equipment under a subcontract arrangement. The contract requires comprehensive after-sales support, including diagnostic evaluations, corrective maintenance, parts replacement, and technical assistance to ensure operational readiness and compliance with safety standards for law enforcement applications. All work must be performed in accordance with manufacturer specifications and industry best practices for non-lethal weaponry systems. The solicitation was posted on July 31, 2026, with responses due by August 17, 2026, and is classified under NAICS code 811310 for industrial and commercial machinery and equipment repair and maintenance. The place of performance and specific location details are not specified, but performance is expected to support Harris County’s operational needs in Texas. The contract is open to qualified subcontractors with demonstrated capability in servicing less-lethal systems and maintaining rigorous service protocols under tight timelines.

POSTED

DEADLINE

Performance Testing & Compliance Certification (Mechanical/Electrical Systems)The contract requires the execution of operational performance testing and inspections on installed mechanical and electrical systems to ensure they meet established functional and safety standards. A critical component of the scope is the generation of comprehensive compliance documentation, which must be formally certified by factory-authorized representatives to validate that all equipment has been tested and verified according to manufacturer specifications and regulatory requirements. This work must be performed on equipment already installed within Huntingdon County, Pennsylvania, with all testing and certification activities tied to the physical presence of the systems at their installed locations. Bidders must respond by August 17, 2026, and the contract is structured as a subcontract under NAICS code 811310, which corresponds to other commercial and industrial machinery and equipment repair and maintenance. The opportunity is posted by Huntingdon County through the Pennsylvania state procurement portal, and while no specific point of contact or set-aside details are provided, the emphasis on formal certification by factory-authorized personnel underscores the need for qualified and accredited service providers with direct ties to equipment manufacturers. Performance must align with industry best practices for documentation and compliance, with no flexibility in the requirement for third-party factory validation.

Huntingdon County

POSTED

DEADLINE

High voltage repair switch gears, high voltage repair for Richmond State Supported Living Center

Solicitation # HHS0017495V2

The contract solicitation, identified as HHS0017495V2, seeks proposals for high voltage repair switch gears and associated high voltage repair services at the Richmond State Supported Living Center in Texas. All activities and deadlines are governed by Central Time, with responses required by 10:30 AM on August 21, 2026, to be received via the Electronic State Bid Directory. An optional on-site visit is scheduled for August 6, 2026, at 10:00 AM to provide bidders with visibility into the worksite. Any questions or clarifications must be submitted by August 10, 2026, and responses to those inquiries will be published as an addendum on August 13, 2026. The anticipated contract start date is September 1, 2026. The solicitation is managed by the Texas Health and Human Services Commission, with Byron Wright serving as the primary point of contact, reachable via email and phone. The contract falls under the SLED category and can be accessed online through the provided TX SmartBuy portal.

Health and Human Services Commission

POSTED

DEADLINE

Truck-Mounted Attenuators (TMA) Supply and ServiceThe contract covers the provision, installation, maintenance, and repair of truck-mounted attenuators designed for work zone impact protection. It is classified as a subcontract under NAICS code 811310, indicating services related to automotive maintenance and repair, and is managed by FAS - Purchasing under the Washington agency office. The solicitation was posted on July 31, 2026, with a submission deadline of September 14, 2026, requiring vendors to deliver comprehensive support services for TMA units used in highway and roadway work zones. The scope demands reliable performance and compliance with safety standards for dynamic impact absorption, ensuring protection for workers and motorists. The place of performance and point of contact details are unspecified, but the work is expected to support federal or state transportation projects within the Washington region. All services must be performed in accordance with industry best practices and contractual obligations for responsive, timely maintenance and emergency repairs.

FAS - Purchasing

POSTED

DEADLINE

in about 1 month

HVAC Maintenance for Commercial Walk-In CoolersThe contract requires semi-annual preventive maintenance and servicing for 33 commercial walk-in coolers located at the USDA-ARS facility in Parlier, California, with services including thorough inspection, cleaning, lubrication, refrigerant level checks, electrical testing, and minor repairs to ensure optimal operation. All work must be performed by a qualified contractor capable of maintaining commercial refrigeration systems to meet federal facility standards, with timely and reliable service critical to sustaining the integrity of stored agricultural research materials. The contract is designated as a Small Business Set Aside under NAICS code 811310, limiting eligibility to certified small businesses, and is structured as a subcontract. The solicitation was posted on July 31, 2026, with a firm deadline for responses on August 14, 2026, at 10:00 PM Eastern Time. Performance will be conducted exclusively at the Parlier, CA location, using the facility’s existing infrastructure and equipment. There are no specified point of contact details available, but all inquiries and submissions must be directed through the SAM.gov portal linked to the opportunity.

USDA Ars Afm Apd

POSTED

DEADLINE

Product Lifecycle & Technical Support ServicesThe contract seeks a subcontractor to deliver comprehensive post-delivery technical support, maintenance, and repair services for wheelchairs, ensuring continued operational reliability and user safety. This includes providing timely troubleshooting, routine servicing, parts replacement, and diagnostic evaluations to address mechanical, electrical, or ergonomic issues that arise after product delivery. The contractor must also supply accurate product lifespan estimates based on usage patterns, environmental conditions, and component wear rates, enabling proactive planning for replacement or upgrade cycles. All services are to be performed in alignment with industry standards and the specific needs of veterans relying on these mobility devices. Performance is required at Loma Linda, California, with a response deadline of August 10, 2026, and the work falls under NAICS code 811310 for miscellaneous repair and maintenance. The contract is issued by the Department of Veterans Affairs through the 262-NETWORK Contract Office 22, indicating a focus on supporting veteran healthcare outcomes. The subcontract nature implies the selected vendor will work under a prime contractor to fulfill broader service obligations. While no set-aside provisions are specified, the emphasis on technical expertise and long-term support underscores the need for qualified, responsive, and reliable service providers with proven experience in durable medical equipment lifecycle management.

262-NETWORK Contract Office 22 (36C262)

POSTED

DEADLINE

Swivel Refurbishment and Component Replacement ServicesThe contract entails the annual servicing of machine swivels used in PlateBright cleaning systems, requiring full disassembly, detailed wear inspection, replacement of all degraded or worn components, and precise reassembly to meet original equipment manufacturer specifications. This work ensures the continued operational integrity and performance of the cleaning systems through systematic maintenance cycles conducted on a yearly basis. The scope is focused exclusively on the mechanical refurbishment of swivel components with no additional system upgrades or modifications beyond OEM standards. The contract is classified as a subcontract under NAICS code 811310 and is issued by the Office of the Chief Procurement Officer within the Department of the Treasury. It was posted on July 31, 2026, with a response deadline of August 14, 2026, at 7:00 PM. Performance of the work is required at a location in Washington, D.C., with a ZIP code of 20228. The solicitation does not specify a set-aside type or point of contact, and details regarding eligibility criteria or submission instructions are not outlined in the provided data.

Office Of The Chief Procurement Officer

POSTED

DEADLINE

Full Preventative Maintenance Services with Calibration and TuningThe contract encompasses comprehensive annual preventative maintenance services for PlateBright machines located at both BEP facilities, covering all standard maintenance tasks alongside critical calibration, performance testing, and system tuning to ensure optimal operational integrity. This includes precision adjustments and verification procedures essential for maintaining equipment accuracy and reliability across high-volume production environments. The scope is designed to minimize downtime, extend equipment lifespan, and uphold consistent output quality through disciplined, scheduled service protocols. Services are to be performed under a subcontract framework classified under NAICS code 811310, with the Department of the Treasury’s Office of the Chief Procurement Officer as the contracting entity. Performance is required at the Washington, D.C. location identified by ZIP code 20228, and responses must be submitted by August 14, 2026, with the solicitation posted on July 31, 2026. While no set-aside type or point of contact details are specified, the urgency of the deadline and technical demands underscore the importance of qualified, experienced vendors capable of delivering certified calibration and system-level tuning to federal precision standards.

Office Of The Chief Procurement Officer

POSTED

DEADLINE

More opportunities from Department Of State → US Embassy Conakry

Same awarding agency

Emergency Response and On-Call Generator SupportThe contract titled Emergency Response and On-Call Generator Support requires the provider to deliver around-the-clock emergency labor services for generator failures or unscheduled maintenance events, with a forecasted volume of 12 emergency response hours per year and a mandatory 24-hour response window to reach the site. This subcontract is issued under NAICS code 811310 and is managed by the U.S. Embassy in Conakry, operating under the Department of State, with performance exclusively required at the embassy’s location in Conakry. The solicitation was posted on July 31, 2026, and responses must be submitted by September 8, 2026, at 4:00 PM, ensuring timely activation of qualified personnel to maintain uninterrupted power operations critical to embassy functions.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

DEADLINE

in about 1 month

Supply of OEM-Specified Consumables and Spare PartsThe contract requires the supply of OEM-approved consumables including engine oil, filters, coolant, and batteries for generator maintenance, all delivered in original sealed containers with full batch traceability to ensure authenticity and quality. These materials must meet strict original equipment manufacturer specifications to maintain system integrity and performance under operational conditions in a remote and demanding environment. The contract is classified as a subcontract under NAICS code 423690 and is issued by the US Embassy in Conakry under the Department of State, with performance requirements centered on the city of Conakry. All deliveries must be completed in strict compliance with traceability protocols to support maintenance records and regulatory compliance. The solicitation was posted on July 31, 2026, with responses due by September 8, 2026, giving potential suppliers a limited window to submit proposals that align with mission-critical operational needs.

Other Electronic Parts and Equipment Merchant Wholesalers

POSTED

DEADLINE

in about 1 month

Laboratory Fuel and Oil Analysis ServicesThe contract requires the performance of annual laboratory analysis on fuel and oil samples to assess microbial contamination, water content, and signs of degradation, with all resulting reports due within thirty days of sample receipt. The work is to be completed in support of the U.S. Embassy in Conakry under a subcontract arrangement, and the services fall under the NAICS code 541380 for other scientific and technical consulting services. The solicitation was posted on July 31, 2026, with a mandatory response deadline of September 8, 2026, and performance is expected to take place in Conakry, Guinea. The U.S. Department of State is the contracting agency, and the analysis is critical for maintaining fuel integrity and operational readiness at the embassy facility.

Testing Laboratories and Services

POSTED

DEADLINE

in about 1 month

Engine Control Module (ECM) Diagnostics and ReportingThe contract involves performing diagnostic services on Engine Control Modules (ECMs) during routine maintenance visits, requiring the use of OEM-specific software and certified technicians to download, analyze, and report operational data. All work must be conducted in Conakry, Guinea, with strict adherence to technical protocols to ensure accurate data collection and interpretation. The services are critical for maintaining vehicle performance and identifying potential mechanical issues before they result in system failures. The contract is classified as a subcontract under NAICS code 541330, and the ordering entity is the U.S. Embassy in Conakry under the Department of State. Proposals must be submitted by September 8, 2026, and the work is expected to support the embassy’s vehicle fleet maintenance program. Technicians must be trained in manufacturer-specific diagnostic tools and capable of delivering comprehensive, actionable reports that inform preventive maintenance strategies. No set-aside provisions are specified, and performance is limited to the designated location in Conakry with no alternative sites permitted.

Engineering Services

POSTED

DEADLINE

in about 1 month

Day Tank and Fuel System MaintenanceThe contract titled Day Tank and Fuel System Maintenance requires comprehensive inspection and maintenance services for generator day tanks at the US Embassy in Conakry. Scope of work includes regular fuel quality assessments, leak detection, alarm system verification, and annual laboratory analysis to evaluate microbial contamination and water content in the fuel. These tasks are critical to ensuring reliable power generation and preventing system failures due to fuel degradation or contamination. The work must be performed in accordance with established protocols to maintain operational readiness of emergency power systems. This subcontract is issued by the Department of State through the US Embassy Conakry with a NAICS code of 541380, indicating it falls under engineering services. The solicitation was posted on July 31, 2026, and responses are due by September 8, 2026. Performance will take place exclusively in Conakry, Guinea, and the contract is aimed at supporting the embassy’s critical infrastructure through rigorous fuel system upkeep. There is no set-aside designation listed, and all interested parties must respond by the deadline to be considered for award.

Testing Laboratories and Services

POSTED

DEADLINE

in about 1 month

Automatic Transfer Switch (ATS) Inspection and MaintenanceThe contract is for the inspection and maintenance of automatic transfer switches at the US Embassy in Conakry, requiring semi-annual and annual servicing that includes both electrical and mechanical work. Performance of these tasks necessitates scheduled power outages and prior approval from the Certificate of Reliability (COR) authority to ensure operational continuity and safety. The work falls under NAICS code 238210, classifying it as electrical contracting, and is structured as a subcontract under the Department of State. All services must be performed at the embassy’s location in Conakry, Guinea, with no other specified performance locations. The opportunity was posted on July 31, 2026, and responses are due by September 8, 2026, at 4:00 PM, with no set-aside provisions or eligibility restrictions indicated. The contract seeks qualified vendors capable of performing high-reliability electrical maintenance in a diplomatic environment where operational uptime is critical.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

in about 1 month

Annual Load Bank Testing ServicesThe contract requires annual load bank testing of diesel generators at the US Embassy in Conakry, with testing conducted at 75 to 80 percent of rated capacity for a duration of two hours per session to mitigate wet stacking and ensure operational reliability. Performance must be closely monitored during each test, and detailed reports documenting results, deviations, and recommendations are mandatory. The work falls under NAICS code 811310, indicating it is a maintenance and repair service, and is structured as a subcontract under the Department of State. The solicitation was posted on July 31, 2026, with proposals due by September 8, 2026, and the performance location is specifically designated as Conakry, Guinea. All testing must be carried out in accordance with established standards to maintain generator integrity and readiness for emergency power needs.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

DEADLINE

in about 1 month

PREVENTIVE MAINTENANCE SERVICE CONTRACT FOR STANDBY DIESEL GENERATORS

Solicitation # 19GV1026Q0015

The United States Embassy in Conakry requires a contractor to provide planned maintenance and inspection services for its low-voltage diesel standby generator systems, including associated equipment such as load banks, automatic transfer switches, and day tanks. The contract mandates two scheduled service visits annually—one semi-annual and one annual—based on calendar intervals, with additional visits triggered by operating hours when they precede the scheduled maintenance. The generator systems, consisting of three Cat 3512 and one Cat 3456 units, must be maintained per OEM specifications to ensure readiness for emergency power, with emphasis on preventing wet stacking through mandatory load testing at 75–80% of rated capacity for a minimum of two hours. All maintenance tasks must align with NFPA 70, NFPA 110, and manufacturer guidelines, covering visual inspections, fluid and filter replacements, battery checks, grounding and bonding verification, ECM diagnostics, and operational tests. The contractor must supply all consumables such as oil, filters, coolant, and batteries but is excluded from repairing or replacing major mechanical components unless authorized by separate purchase order. Contractors must provide OEM-certified technicians with access to proprietary diagnostic tools, maintain inventories of expendable parts, and ensure compliance with safety protocols including lockout/tagout procedures, proper PPE use, and hazardous material disposal certified under local and U.S. regulations. Laboratory analysis of fuel and oil samples is required annually, with reports submitted within 30 days, and all waste must be properly documented. The scope includes semi-annual and annual inspections for load banks and automatic transfer switches, with comprehensive electrical and mechanical servicing for the latter requiring power outages and COR approval. Day tank maintenance focuses on fuel quality, leak detection, alarm functionality, and annual lab testing for microbial contamination and water content. Contractors must submit detailed checklists, service reports, ECM backups, grounding inspection reports, and proof of hazardous waste disposal after each service, along with a strategic plan, certifications, insurance, and personnel documentation prior to work commencement. Priority is given to local vendors with established operations in Conakry, and emergency support must be available within 24 hours. All deliverables are to be submitted to the Contracting Officer’s Representative and electronically to powersupport@state.gov.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

DEADLINE

in about 1 month