This Pre-Solicitation opportunity from Department Of Health And Human Services was posted on January 14, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Service and Maintenance Agreement for Agilent Technologies Inc. Instruments

Awarded

75D301-26-Q-78801Federal

Submission Closed01/23/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 811210

New

SLED

G15-703408 - Vsign Annual Service

Solicitation # SRC0000037275

This solicitation, identified as G15-703408, is issued by the Alabama Department of Transportation, G15 Transportation Planning, for annual Vsign service and hardware maintenance for CCS sites. The contract is governed by the State of Alabama Office of the Chief Procurement Officer's Standard Terms and Conditions for Quick Quotes. The total contract value is capped at 25,000 dollars, covering the original agreement and any subsequent renewals. The period of performance allows for annual renewals by written agreement of both parties for a maximum total duration of five years from the effective date. Suppliers must submit responses electronically through the Alabama Buys portal by the deadline of October 26, 2026. Key requirements for bidders include certifications of tax compliance pursuant to Section 41-4-142 of the Code of Alabama 1975 and certification that the entity and its principals are not debarred or suspended from government participation. The contract stipulates that the supplier acts as an independent contractor and agrees to the jurisdiction of the City of Montgomery for any legal disputes. Additionally, the state reserves the right to request professional licenses, insurance certificates, or manufacturer authorizations following the bid opening.

Alabama Department of Transportation, G15 Transportation Planning

POSTED

DEADLINE

SKID Truck and Pavement Sensor CalibrationThis subcontract involves the calibration of Force Plate SKID trucks and pavement sensors to support prime contractors on Texas Department of Transportation pavement testing projects. The primary objective is to ensure the measurement accuracy of data collection equipment and sensors used for evaluating road conditions, with the final deliverables consisting of calibrated equipment and formal certification reports. The opportunity is categorized under NAICS code 811210 and is associated with the Texas Department of Transportation. Interested parties should note that the response deadline is November 4, 2026, following a posting date of October 21, 2026.

Texas Department of Transportation

POSTED

DEADLINE

MFP Maintenance and Repair ServicesThis subcontract for MFP Maintenance and Repair Services supports prime contractors managing print projects for the City of Dothan in Alabama. The scope of work involves performing both preventive and corrective maintenance on multi-function printers, including on-site repairs and the provision of loaner or replacement units within 24 hours if a device cannot be fixed immediately. The service provider is required to use diagnostic tools to maintain a strict hardware fleet standard, ensuring a minimum uptime of 98% per device each quarter. This contract emphasizes strict adherence to service level agreement uptime guarantees to ensure continuous operational efficiency for the agency.

POSTED

DEADLINE

Flap Skew Detection Unit Overhaul ServicesThis subcontract for Flap Skew Detection Unit Overhaul Services involves performing comprehensive teardown, evaluation, repair, and reassembly of specialized units for prime contractors supporting NAVSUP Weapon System Support projects. The scope of work includes disassembling units, cleaning and inspecting components according to approved repair manuals, and replacing any parts that exceed established limits. To ensure quality and functionality, the contractor must utilize provided fixtures, jigs, and test equipment to verify that each unit reaches Ready for Issue status. All work must be performed in strict compliance with IPC/EIAJ-STD-001C and MIL-STD-454 standards. The project is based in Philadelphia and falls under NAICS code 811210. The final deliverable for this Department of Defense effort is a certified Ready for Issue unit.

Navsup Weapon Systems Support

POSTED

DEADLINE

Repair and Modification of Thrust Shoe w/InstrThis subcontract involves the teardown, evaluation, repair, and modification of Thrust Shoe w/Instr (NSN 016233028) for prime contractors supporting Navsup Weapon Systems Support Mech projects under the Department of Defense. The selected provider must be an authorized distributor of the original manufacturer and is required to disassemble and assess assets using precision tooling and technical orders in accordance with CAGE 75333 and Ref No. 482480-008. The primary objective is the delivery of a fully repaired and modified asset that meets all specified functional requirements. This opportunity falls under NAICS code 811210, with a response deadline set for November 4, 2026.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Precision Cleaning and Testing (MIL-STD-1330)This subcontract involves providing precision cleaning and testing services for prime contractors supporting Navsup Weapon Systems Support Mech projects under the Department of Defense. The scope of work focuses on executing Oxygen Clean processes for various shipboard components, including those used in oxygen, helium, helium-oxygen, nitrogen, and hydrogen systems. The contractor must utilize certified precision cleaning facilities to ensure the total absence of contaminants in accordance with MIL-STD-1330 standards. The final deliverables include certified Oxygen Clean filter components accompanied by formal certification of cleanliness. This opportunity falls under NAICS code 811210.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Digital Computer Depot-Level RepairThis subcontract for Digital Computer Depot-Level Repair involves the physical repair and testing of C-5 Digital Computer units to support prime contractors on US Air Force projects. The scope of work includes executing depot-level hardware and software repairs utilizing specialized test benches and diagnostic software to ensure all units meet strict interface requirements. Additionally, the contractor is responsible for configuration management to track the status of all repairs and must deliver fully functional, tested computer units. The project is managed under the Department of Defense through agency FA8538 Afsc Pzaab, with performance taking place in Warner Robins, Georgia. Interested parties must ensure compliance with DFARS 252.204-7012 regulations. The opportunity was posted on October 21, 2026, with a response deadline of November 20, 2026, falling under NAICS code 811210.

POSTED

DEADLINE

F-15 DMS Processor and Cartridge RepairThis subcontract, titled F-15 DMS Processor and Cartridge Repair, involves the testing and repair of specialized avionics processing units and data cartridges for prime contractors supporting Air Force Sustainment Center F-15 Digital Mapping System projects. The scope of work specifically includes the maintenance of Advanced Display Core Processors, Digital Map Processors, Mission Cartridges, and Theatre Cartridges. To successfully deliver these fully repaired and tested components, the contractor must utilize specialized test equipment and maintain access to production-level technical data. Managed by the Department of Defense under agency FA8538 Afsc Pzaab, the work is designated under NAICS code 811210 and will be performed in Warner Robins. The opportunity was posted on October 21, 2026, with a response deadline of November 5, 2026.

POSTED

DEADLINE

Belimed Sterilizer and Washer Preventive Maintenance & Repair (PM&R)This subcontract involves providing planned maintenance inspections and corrective repair services for SteelcoBelimed sterilizers and washers at the VA Southern Arizona Health Care System. The selected vendor must be a certified Belimed provider capable of using OEM-specific diagnostic tools to ensure all equipment meets manufacturer specifications. Key deliverables include the restoration of fully operational equipment, detailed maintenance logs, and comprehensive service reports. Managed under the Department of Veterans Affairs Network Contract Office 22, the project falls under NAICS code 811210. The opportunity was posted on October 21, 2026, with a response deadline of October 28, 2026. The contractor will work as a subcontractor to prime contractors to maintain critical sterilization and washing infrastructure.

262-NETWORK Contract Office 22 (36C262)

POSTED

DEADLINE

UHF DMR Tier III System Maintenance ServicesThis subcontract for the Department of Veterans Affairs involves providing comprehensive maintenance, semiannual preventive services, and unscheduled repairs for UHF DMR Tier III systems within VA healthcare facilities. The scope of work includes the testing, calibration, and troubleshooting of Avtec radio communications systems as well as Tait repeaters and Motorola MOTOTRBO portable and mobile radios. To ensure system integrity, the contractor must provide factory-trained technicians who possess direct access to original equipment manufacturer software and calibration tools. The primary objective is to deliver a fully operational UHF DMR system supported by detailed maintenance logs. This opportunity falls under NAICS code 811210 and is managed by the Network Contract Office 8. Interested parties should note the response deadline of October 28, 2026.

248-NETWORK Contract Office 8 (36C248)

POSTED

DEADLINE

Circuit Card Assembly (CCA) and Electronic Component Repair ServicesThis subcontract for the Department of Defense and NAVSUP Weapon Systems Support involves the technical repair, overhaul, and testing of electronic components and circuit card assemblies for prime contractors. The scope of work includes performing failure analysis, creating corrective action plans, and executing test procedures within ESD-protected environments to ensure all delivered items are in ready-for-issue condition. To qualify, providers must maintain ISO 9001 or SAE AS9100 certifications and adhere to ANSI/NCSL Z540.3 or ISO-10012-1 calibration standards. The opportunity is categorized under NAICS code 811210, with a response deadline set for November 20, 2026.

Navsup Weapon Systems Support

POSTED

DEADLINE

Medrad Provis Injector Preventative Maintenance and Technical SupportThis subcontract involves providing preventative maintenance, calibration, and technical support for Medrad Provis Injectors at Department of Veterans Affairs medical centers. The scope of work includes executing PM cycles, performing device calibrations and safety testing, and installing necessary hardware and software updates. To ensure quality and safety, the contractor must be certified in Medrad Provis equipment maintenance and adhere to all applicable medical device safety standards, providing completed maintenance logs and calibration certificates upon completion. Managed under the Department of Veterans Affairs Network Contract Office 02, the opportunity is categorized under NAICS code 811210. Interested parties should note the response deadline of October 23, 2026. This role is designed for specialists capable of supporting prime contractors to maintain critical medical imaging equipment within the VA healthcare system.

242-NETWORK Contract Office 02 (36C242)

POSTED

about 16 hours ago

DEADLINE

in 1 day

AI Contract Overview

The Centers for Disease Control and Prevention (CDC) intends to award a sole source, firm-fixed price contract to Agilent Technologies, Inc. for a comprehensive service and maintenance agreement supporting over 100 analytical systems used by the Division of Laboratory Sciences. This procurement is conducted under the authority of FAR 13.106-1(b) and 41 U.S.C. 3304(a)(1), citing Agilent's unique position as the original equipment manufacturer (OEM) with the proprietary expertise, certified engineers, and parts necessary to ensure operational readiness for critical public health and emergency responses. The contract period runs from April 1, 2026, to March 31, 2031, consisting of a base year and four option years. The scope of work includes preventative maintenance, telephone support, on-site repairs, and no-cost software and firmware updates to maintain a minimum instrument uptime of 95%. Performance is measured against ten mandatory objectives, including a four-hour response time for urgent requests, repair completion within five calendar days, and a 90% on-schedule preventative maintenance rate. The contractor must adhere to strict CDC security protocols, including Federal Desktop Core Configuration (FDCC) standards and rigorous controls on portable media. Deliverables include monthly performance reports, quarterly conference calls, and an annual review meeting. All services will be performed primarily at the CDC Chamblee Campus in Atlanta, Georgia.

General Info

Agency

Department Of Health And Human Services → CDC Office Of Acquisition Services

Contract Value

$1,947,631.44

NAICS

811210 - Electronic and Precision Equipment Repair and Maintenance

Place of Performance

Atlanta, GA, 30341, USA

Set-Aside

NONE

Awardee

AGILENT TECHNOLOGIES INC

Award Issued Date

04/03/2026, 12:00:00 AM UTC

Documents

Limited-Sources Justification for Agilent Technologies Service and Maintenance Agreement FY 2026

justification-and-authorization

High

Performance Work Statement for Agilent Technologies Instrumentation Maintenance

performance-work-statement

High

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseAwarded

PostedJan 14

Presolicitation

AwardedApr 3

Contract was awarded

Submission Closed

01/23/2026, 05:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Health And Human Services → CDC Office Of Acquisition Services

Contacts1 person available

OfficeATLANTA, GA, 30333, USA

Organization / AgencyDepartment Of Health And Human Services → CDC Office Of Acquisition Services

Office AddressATLANTA, GA, 30333, USA

Contacts

Henrietta Fumbah

contact@example.gov

+1 (555) 000-0000

Full Description

The Centers for Disease Control and Prevention intends to award a sole source purchase order to Agilent Technologies, Inc.. Justification of the capability required is provided on the sole source justification document. This contract action is for supplies or services for which the Government intends to solicit and negotiate with only one source under the authority of FAR 13.106-1(b) (SAP) and 41 U.S.C. 3304(a)(1)..

This notice of intent is not a request for competitive quotations. A determination by the government not to compete this proposed contract based upon responses to this notice is solely within the discretion of the government. Information received will normally be considered solely for the purpose of determining whether to conduct a competitive procurement. Any quotation/response should be emailed to contract specialist at ehu0@cdc.gov.