This Government Contract opportunity from Department Of Agriculture was posted on September 1, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Sewer Lift Station Pumps and Controls Supplier

Closed

Federal

Submission Closed09/15/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 333911

New

International

Supply of Heavy-Duty Copper Radiator for 500 kVA GeneratorThis subcontract agreement involves the procurement of a heavy-duty copper radiator designed for a 500 kVA capacity generator engine. The selected provider is responsible for either manufacturing or sourcing a unit that meets these specific technical requirements and ensuring its delivery to the Pakistan State Oil Company Ltd depot located in Tarujabba. The project is managed by Pakistan State Oil Company Ltd and falls under the NAICS code 333911. Interested parties must submit their responses by the deadline of November 6, 2026, to support facility projects managed by prime contractors in Pakistan.

Pakistan State Oil Company Ltd

POSTED

DEADLINE

HVAC Pump Equipment Supplier

College of Coastal Georgia

POSTED

DEADLINE

Lime Slaking System Equipment SupplyThis subcontract for the Lime Slaking System Equipment Supply involves providing specialized mechanical equipment for water treatment plant projects managed by Hollywood Public Utilities in Florida. The scope of work requires the manufacture and delivery of lime slakers, slurry tanks, and associated pumps, all of which must be constructed using Type 316 stainless steel. In addition to the physical hardware, the supplier is responsible for delivering critical technical documentation, including dimensional drawings, shop drawings, and technical data sheets. The contractor must also provide factory test reports and anchor bolt calculations specifically designed to withstand seismic and wind loads. The response deadline for this opportunity is December 3, 2026.

POSTED

DEADLINE

EMI Waveguide Ventilation SystemsThis subcontract involves the supply and integration of specialized EMI waveguide ventilation systems for prime contractors supporting Army Headquarters Department of Army G-3/5/7 projects. The scope of work includes providing low-noise intake and exhaust ventilation blowers and fabricating honeycomb waveguide vents specifically designed to block RF and electromagnetic wave propagation. The contractor is responsible for installing secure mounting flanges and power cabling, as well as ensuring RF attenuation verification for all ventilation ports. The project requires the delivery of two complete sets of exhaust ventilation assemblies. Managed under the Department of Defense through agency W6QK Acc-Apg, the contract falls under NAICS code 333911. Performance is centered in the 77416 area, with a brief response window ending on October 29, 2026.

POSTED

DEADLINE

Supply and Configuration of Legacy Roby 1 CNC MachinesThis subcontract involves the supply and configuration of three Legacy Roby 1 CNC Machines for prime contractors working on facility projects at Red Rocks Community College. The scope of work requires the provision of units equipped with integrated computers, the installation of Mach3 Motion Control and CAM Pro Turning Software, and full machine calibration. Additionally, the contractor must provide 208V Single Phase Power Supply components and ensure all equipment meets manufacturer-issued specifications for educational standards. The project is categorized under NAICS code 333911 and was posted on October 26, 2026, with a response deadline of November 5, 2026. The final deliverable consists of three fully calibrated and software-loaded CNC machines ready for use within the college's facilities.

Red Rocks Community College

POSTED

DEADLINE

Valve Supply (NSN 2915-01-182-9935)This subcontract involves the manufacture or procurement of five units of a specific valve, identified by NSN 2915-01-182-9935, to support prime contractors delivering on DLA supply contracts. The work is managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, with the place of performance located at Tinker AFB. The contractor must ensure full traceability to approved sources and conduct quality inspections in accordance with MIL-STD-1916 or ASQ H1331. Mandatory qualifications include SAE AS9003 or ISO 9001 certification and a completed CMMC Level 2 self-assessment. The response deadline for this requirement is November 2, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Globe Valve Supply (NSN 4820014473220)This subcontract involves the manufacture and supply of Globe Valves matching NSN 4820014473220 for prime contractors under Department of Defense DLA supply contracts. The technical specifications require the use of NEOFLON M400H material as a substitute for KEL-F and the application of KRYTOX 240AC for lubrication. It is explicitly stated that these components must not be designed for use with steam, hydraulic fluid, or seawater. The project is managed through the DDSP New Cumberland Facility and requires strict adherence to MIL-STD-2073-1E, MIL-STD-129, and RP001 packaging standards. All valves must be delivered completed, marked, and packaged on an FOB Origin basis. The response deadline for this opportunity is November 5, 2026.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Supply of Fluid Pressure Regulating Valve (NSN 4820016993722)This subcontract involves the procurement of one Fluid Pressure Regulating Valve meeting the exact specifications of NSN 4820016993722 for prime contractors on DLA/Navy projects. The Department of Defense, specifically DLA DIST SAN JOAQUIN, requires the part to be delivered to Tracy, California, by March 20, 2027. A critical restriction of this contract is that the valve must not be produced using additive manufacturing processes. Eligible providers must maintain an active CAGE code and registration in SAM.gov. The opportunity falls under NAICS code 333911, with a response deadline set for November 5, 2026.

POSTED

DEADLINE

Fuel Metering and Distributing Pump SupplyThis subcontract involves the supply of 14 fuel metering and distributing pumps, identified by NSN 015537551, to support prime contractors delivering on DLA supply contracts. The scope of work requires the manufacturer or source to ensure all units comply with MIL-STD-129 marking standards and are palletized according to RP001 DLA Packaging Requirements. Additionally, the provider must supply Material Safety Data Sheets and hazard warning labels in accordance with 29 CFR 1910.1200. The contract is issued by the Department of Defense under the DLA Weapons Support Land Supplier Operations Vehicle Support agency, with performance taking place in New Cumberland, Pennsylvania. Operating under NAICS code 333911, the agreement focuses on the delivery of 14 fully palletized pumps. The solicitation was posted on October 25, 2026, with a response deadline of November 5, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

3000GPM Diesel Fire Pump and Controller SupplierThis subcontract agreement involves the supply and delivery of a 3000GPM diesel fire pump and a matching controller for prime contractors working on City of Chattanooga facility projects. To ensure full system compatibility, the supplier must provide a replacement unit that matches the manufacturer and size of the existing equipment. The contract is managed by the City of Chattanooga Business Unit in Tennessee under NAICS code 333911. Interested parties must submit their responses by the deadline of November 12, 2026, for this procurement which was posted on October 25, 2026.

City of Chattanooga Business Unit

POSTED

DEADLINE

Well Pump Installation ContractorThis subcontract opportunity is for a Well Pump Installation Contractor to support prime contractors on an Ontario Clean Water Agency project located at Mississippi Mills Well 7. The selected contractor will be responsible for the physical removal of existing pump assemblies and piping, conducting inspections of the well casing, and the subsequent installation and connection of new pump assemblies and discharge piping to ensure a fully operational system. The scope of work requires the use of specialized well-pulling equipment, including cranes and pump hoisting rigs. To qualify, contractors must hold a licensed well contractor designation and possess valid confined space certifications. Interested parties must submit their responses by November 9, 2026.

Ontario Clean Water Agency

POSTED

DEADLINE

Well Pump and Motor Equipment SupplierThis subcontract agreement involves the supply of heavy-duty submersible pump and motor assemblies for the Mississippi Mills Well 7 replacement project under the Ontario Clean Water Agency. The selected supplier is responsible for the manufacture and delivery of the equipment directly to the project site in Canada, ensuring all components meet CSA or equivalent electrical safety standards. As part of the deliverables, the supplier must provide comprehensive technical documentation, including manufacturer certifications, performance curves, and warranty information. Interested parties must submit their responses by November 9, 2026, to support the prime contractors overseeing this Government of Ontario infrastructure initiative.

Ontario Clean Water Agency

POSTED

4 days ago

DEADLINE

in 13 days

AI Contract Overview

This subcontract opportunity involves the supply of direct replacement sewer lift station pumps and control systems for USDA-ARS facility projects located in Stoneville, MS. The selected provider is responsible for supplying all necessary pumps, control panels, and electronics, while also providing detailed shop drawings and technical specifications for government approval. The scope of work includes the delivery of all specified equipment and systems directly to the project site to support prime contractors. This is a small business set-aside contract under the Department of Agriculture. The procurement is categorized under NAICS code 333911 and requires a response by September 15, 2026. Interested parties must meet the technical requirements for providing specialized mechanical and electronic components necessary for sewer lift station operations within federal agricultural research facilities.

General Info

Supply sewer lift station pumps and control systems for USDA-ARS projects in Mississippi.

Agency

Department Of Agriculture → USDA Ars Afm Apd

NAICS

333911 - Pump and Pumping Equipment Manufacturing

Place of Performance

Stoneville, MS, 38776, USA

Set-Aside

SBA

Documents

This scope was carved out of 1232SA26Q1006.

The full solicitation package (5 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Install Sewer Lift Station Pumps and Controls, Stoneville, Mississippi

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedSep 1

subcontract

Response DeadlineSep 15

Deadline has passed

Submission Closed

09/15/2026, 07:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Agriculture → USDA Ars Afm Apd

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Agriculture → USDA Ars Afm Apd

Office AddressN/A

ContactsNo contact information available

Full Description

Supplies direct replacement sewer lift station pumps and control systems for prime contractors on USDA-ARS facility projects in Stoneville, MS. Provides detailed shop drawings and technical specifications for all materials for government approval. Supplies sewer lift station pumps and control panels/electronics. Delivers the pumps and control systems to the project site.