Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

SHACKLE

Active
SPE4A5-26-T-338AFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract solicitation titled SHACKLE with solicitation number SPE4A5-26-T-338A seeks the procurement of 24 units of a commercial off the shelf item identified by NSN 4030-01-495-8547 under purchase request 7017761250. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R or I numbers, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless an amendment updates the requirements. The delivered items must conform to DLA packaging requirements and government identification must be removed from any non-accepted supplies. The delivery deadline is set at 20 days after delivery order issuance, with the place of performance located at Fort Eustis, Virginia, zip code 23604-5577. The solicitation was posted on August 10, 2026, with responses due by August 18, 2026, and is classified under NAICS code 332999. Primary point of contact for inquiries is Hien-Van Trinh, reachable via email or phone provided by the ASC Supplier OEM Division within the Department of Defense.

General Info

Procure 24 units of NSN 4030-01-495-8547 for Fort Eustis, VA, due in 20 days, DLA standards apply.

Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISIONView Agency

NAICS

332999 - All Other Miscellaneous Fabricated Metal Product ManufacturingView NAICS

Place of Performance

BLDG 1610 PATCH RD AWCF SSF, FORT EUSTIS, VA, 23604-5577, US

Set-Aside

NONE

Documents

(1)

Request for Quotations SPE4A5-26-T-338A

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER OEM DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER OEM DIVISION
View Agency Profile
Office AddressUS
Contacts
Hien-Van Trinh
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
SHACKLE
SHACKLE
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
COMMERCIAL OFF THE SHELF ITEM. THE PROCUREMENT
AGENCY HAS COMMERCIAL CATALOG DATA ADEQUATE FOR
THE NSN/Part Number: 4030-01-495-8547 Quantity: 24 EA Purchase Request: 7017761250QTY: 24 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332999
New
Federal
The Savannah River Field Office (SRFO) desires to procure virgin palladium sponge meeting the requirements of specification ASTM B 589-94, less than 5 ppm sulfur.The Savannah River Field Office is seeking to procure virgin palladium sponge that complies with ASTM B 589-94 specifications and contains less than 5 parts per million of sulfur. This procurement is part of an acquisition forecast issued by the National Nuclear Security Administration under the Department of Energy, targeting small businesses as the preferred set aside category. The North American Industry Classification System code for this requirement is 332999, indicating it falls under miscellaneous manufacturing industries. The place of performance is designated as Maryland, though no specific city or zip code is provided. Chelsea Murphy, the Small Business Program Manager, serves as the point of contact and can be reached via email for further inquiries. The forecast was posted on August 10, 2026, and potential vendors are advised to monitor the official energy.gov portal for updates or the release of a formal solicitation.
National Nuclear Security Administration

POSTED

about 1 hour ago

DEADLINE

N/A
View Details
NAICS: 332999
New
Federal
WNMO UTV REPLACEMENTS (GERING AND CASPER OFFICES)The Western Area Power Administration, under the Department of Energy, is forecasting a procurement for UTV replacements to support operations at its Gering and Casper offices, with a focus on small business participation. The opportunity is classified under NAICS code 332999, indicating it relates to other miscellaneous fabricated metal product manufacturing, suggesting the vehicles may involve customization or specialized modifications. While the solicitation number and exact contract value are not yet available, the posting date indicates this is a pre-solicitation forecast, giving potential vendors advance notice to prepare proposals. The place of performance is listed as Virginia, though the offices served are in Gering and Casper, which may imply logistical coordination or central administration responsibilities. Two Small Business Program Managers are designated as points of contact, emphasizing the agency’s intent to engage qualified small businesses, and their emails are provided for inquiries and further details. This forecast signals an upcoming opportunity aligned with federal small business procurement goals.
Western Area Power Administration

POSTED

about 1 hour ago

DEADLINE

N/A
View Details
NAICS: 332999
New
DIBBS
AIR SPRING, VEHICULA
Solicitation # SPE7L1-26-T-948X
The contract specifies the procurement of one air spring for vehicle use with NSN 2510-01-732-1241 and part number 1R12-607 manufactured by Goodyear Tire & Rubber Company, under solicitation SPE7L1-26-T-948X. Delivery is required within 20 days from the contract award, FOB origin, with zero variance allowed in quantity and inspection and acceptance occurring at the destination. All supplies must comply with DLA's Master List of Technical and Quality Requirements, which take precedence over other standards such as ASTM D3951, and packaging must follow MIL-STD-129 and RP001 DLA Packaging Requirements. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute chemicals require prior approval unless explicitly authorized by specification. Packaging shall be palletized per DLA guidelines and labeled appropriately with the correct Unit of Issue and Quantity per Unit Pack. The shipment is to be delivered via the fastest traceable freight method, not parcel post, to the specified Navy Expeditionary Logistics Support Group address in Williamsburg, VA, with an original required delivery date of August 7, 2026. Government use codes and shipping identifiers are provided for internal tracking and logistics coordination.
LAND SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332999
New
DIBBS
HOSE ASSEMBLY, NONME
Solicitation # SPE7M4-26-T-328Z
This contract pertains to the procurement of a nonmetallic hose assembly identified by NSN 4720013890335 and part numbers 1B5689 and A3340-1 from RTX Corporation and Parker Hannifin Corp, respectively, with a total quantity of seven units. The requirement is issued under solicitation SPE7M4-26-T-328Z and is subject to all technical and quality standards enumerated in the DLA Master List of Technical and Quality Requirements, which supersede any other standards such as ASTM D3951. Packaging must comply with MIL-STD-129 and the DLA Packaging Requirements for Procurement RP001, with palletization and labeling strictly adhering to these specifications. The unit of issue is each, with a fixed quantity of seven units and no variance permitted. Delivery is ordered FOB origin with inspection and acceptance occurring at the destination, and delivery must occur within 136 days from the award date, with an original required delivery date of January 26, 2027, and a need ship date of January 5, 2027. All supplies must be prepared for delivery in accordance with the referenced packaging standards and shipped to the designated DLA distribution warehouse in Tracy, California. Transportation logistics are governed by DLA procedural notes C19 and C20, and the point of contact for inquiries is Glenda Gustafson of the Department of Defense’s Fluid Handling Division.
FLUID HANDLING DIVISION

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332999
New
DIBBS
HOSE ASSEMBLY, NONMETAL
Solicitation # SPE7M4-26-T-328J
The contract specifies the procurement of a nonmetallic hose assembly with a 5/16 inch inner diameter and 72 inch length, governed by military specifications MS28741K and MIL-DTL-8795G, and identified by NSN 4720-00-080-0117. The product must meet stringent technical and quality requirements as defined in the DLA Master List of Technical and Quality Requirements, which supersede all other specifications. Components of the assembly are subject to Qualified Products List (QPL) or Qualified Manufacturers List (QML) requirements, meaning only qualified sources may be used, and the offeror must supply components exclusively from approved QPL/QML sources. The hose must be resistant to hydraulic fluid, fuel, and oil, and the use of Class I ozone-depleting chemicals is strictly prohibited, with any substitutes requiring prior approval. The contract requires full and open competition, with deliveries due within 20 days of order, FOB origin, and inspection and acceptance to occur at the destination. Sampling and inspection must follow MIL-STD-1916, ASQ H1331, or a comparable zero-defect sampling plan, with all specified attributes held to stringent verification levels and acceptance criteria. Packaging must comply with ASTM D3951 and MIL-STD-129, adhering to DLA’s RP001 packaging requirements, and palletization must follow specified guidelines. Parcel post is prohibited; shipments must be sent via traceable freight to the designated Charleston, West Virginia delivery point. The contract is for four units at a unit price of $4, totaling $16, with a required delivery date of August 6, 2026, and all documentation and labeling must reflect exact contractual specifications.
FLUID HANDLING DIVISION

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332999
New
DIBBS
SPRING ASSEMBLY, LEA
Solicitation # SPE7L1-26-T-948D
This contract, issued under solicitation SPE7L1-26-T-948D by the Department of Defense’s Land Supply Chain, requires the delivery of one unit of Spring Assembly with NSN 2510-01-558-3040 and part number 22KP168, to be delivered within five days of award at the origin point FOB. The item must comply with all DLA Master List of Technical and Quality Requirements, which supersede any conflicting specifications including ASTM D3951, and packaging must adhere to MIL-STD-129 labeling and RP001 packaging standards. Use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute materials require prior approval unless explicitly permitted by the specification. The contract enforces a zero percent quantity variance and mandates inspection and acceptance at the destination. The delivery is targeted for the W6KH PFC Reynolds USAR Center in Parkersburg, WV, with shipment required via a traceable method excluding parcel post, and must be marked with the designated government identifiers including TCN W50XCU62160008. The unit of issue is EA, and pricing is set at $1.00 per unit. The required delivery date is August 7, 2026, with the solicitation open for response through August 21, 2026. All technical and quality obligations are governed by the active revision of the DLA Master List as of the solicitation issue date, and the contract is classified under NAICS code 332999 for other miscellaneous manufacturing. Government-specific codes and project identifiers such as TP 1 and IPD 03 are included for internal tracking, with Kristina Derry designated as the primary point of contact.
LAND SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332999
New
DIBBS
SHOCK ABSORBER, DIRE
Solicitation # SPE7L1-26-T-948T
The contract specifies the procurement of one shock absorber, direct acting, with NSN 2510-01-731-1456 and part number P/N 85045 from MAREMONT CORP GABRIEL DIV, under solicitation SPE7L1-26-T-948T. The item must be delivered FOB origin within 20 days of contract award with no variance allowed in quantity, and inspection and acceptance occur at the destination. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersedes other standards including ASTM D3951. Packaging must comply with MIL-STD-129 and RP001 DLA Packaging Requirements, with palletization conforming to specified DLA standards. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute chemicals require prior approval unless explicitly authorized. The item is designated for delivery to the Navy Expeditionary Logistics Support Group in Williamsburg, VA, with shipment required via the fastest traceable means—parcel post is forbidden. The original required delivery date is August 7, 2026, and the contract includes specific government-use codes for tracking, distribution, and funding. Unit of issue is each, and all labeling, marking, and packaging must align with the contract’s detailed packaging and identification protocols.
LAND SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332999
New
DIBBS
PARTS KIT, LEAF SPRI
Solicitation # SPE7L1-26-T-947S
The contract pertains to a Parts Kit designated as LEAF SPRI, identified by NSN 2510015587316 and purchase request 7017800042, with a requirement for one unit to be delivered within five days FOB origin. All packaging and preservation must strictly comply with the latest revision of MIL-STD-2073-1E, specifically Appendix D, which governs kit packaging. The preservation method must adequately protect the most critical item within the kit, and all loose hardware must be sealed in individual containers using the highest applicable preservation technique to prevent corrosion or damage. Bulk shipment of hardware is prohibited; each item must be pre-packaged and clearly identified to eliminate the need for any re-sorting or repackaging by the recipient. The kit must include a detailed parts list showing part names, part numbers, and quantities. Packaging and marking adhere to MIL-STD-129, with special labeling requiring an upward arrow and “OPEN THIS SIDE” instruction. Unit containers and intermediate packaging must follow specified codes, and palletization must meet DLA packaging standards. The kit is subject to inspection and acceptance at the destination, with zero quantity variance allowed. This solicitation, issued under contract number SPE7L1-26-T-947S by the Department of Defense’s Land Supply Chain, was posted on August 10, 2026, with a response deadline of August 21, 2026. Technical and quality requirements referenced in the document are drawn from the DLA Master List of Technical and Quality Requirements, accessible via the official DLA portal, and the applicable version is determined based on the solicitation issue or award date depending on acquisition size. The unit of issue is each (EA), and delivery is to be made to Parkersburg, West Virginia, with a zip code of 26101-0000. The primary point of contact is Kristina Derry, reachable via email and phone provided. All materials must arrive fully serviceable and fully compliant with contractual packaging, marking, and segregation standards as defined in MIL-STD-2073-1E, ensuring immediate readiness for use upon receipt.
LAND SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332999
New
DIBBS
CAB SIDE ASSEMBLY
Solicitation # SPE7L3-26-T-170W
The contract pertains to the procurement of one CAB SIDE ASSEMBLY with NSN 2510-01-524-4947 under solicitation SPE7L3-26-T-170W, requiring delivery within ten days to Camp Lejeune, North Carolina, FOB origin. The unit of issue is AY and the quantity is fixed at one unit with zero variance allowed. All packaging must comply with MIL-STD-2073-1E, including specific preparation methods, protective materials, and wrap and cushioning standards, while marking must adhere to MIL-STD-129 with the special marking code ZZ indicating “OPEN THIS SIDE” and mandatory serial number labeling on all containers. The shipment is not to be sent via parcel post but must use traceable freight methods, with the delivery addressed to the Distribution Management Office at Building 1012, Camp Lejeune. The required delivery date is March 23, 2026, and the contract incorporates all technical and quality requirements from the DLA Master List of Technical and Quality Requirements, with compliance determined by the revision in effect at the solicitation issue date. Government-specific identifiers such as RDD E, PROJ TP 2, and DIC A3A apply for internal tracking and use only, and point of contact for inquiries is Lee Miller at DLA.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332999
New
DIBBS
Nonmetallic Bushing Supply and Delivery
ASC SUPPLIER OPER AE AND AF DIV

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 332999
New
DIBBS
Packaging & Preservation of Technical EquipmentThe contract requires the packaging and preservation of diving cylinders and technical equipment in strict compliance with TQ Requirement IP025 and ASTM D3951 standards, utilizing vapor corrosion inhibitor materials, desiccants, and sealed enclosures as mandated by the Defense Logistics Agency. All procedures must ensure long-term protection against corrosion, moisture, and environmental degradation during storage and transport, with specific attention to the integrity of sensitive technical components. The work is to be performed at the designated place of performance in Tracy, California, with a response deadline of August 20, 2026, and was posted on August 9, 2026, under a subcontract classification for industrial maintenance and repair services supporting the Department of Defense.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 332999
New
DIBBS
Precision Manufacturing of Cartridge Magazines
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

1 day ago

DEADLINE

in 10 days
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

Same awarding agency

New
DIBBS
PARTS KIT, CONTROL SURF
Solicitation # SPE4A5-26-Q-0574
The contract requires the supply of 18 units of a Parts Kit, Control Surface, Aircraft with NSN 1560-01-560-9901 and part number CA64527-001, manufactured by ONTIC ENGINEERING & MANUFACTURING, INC. Delivery is mandated within 552 days after award, with FOB origin, inspection and acceptance occurring at the destination. The item is designated as a Critical Application Item and must comply with stringent packaging standards per MIL-STD-2073-1E, including preservation, cushioning, and marking in accordance with MIL-STD-129. Each kit must be contained in a single box with a detailed contents list, barcoded per specifications, and palletized per DLA Packaging Requirements. The U.S. government’s unit of issue is specified, and Item Unique Identification is not required per customer request, though DFARS 252.211-7003(c)(1)(i) remains applicable. Sampling and quality assurance follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and critical, major, and minor attributes must be verified at levels VII, IV, and II respectively. Cybersecurity compliance at CMMC Level 2 is self-assessed, and Covered Defense Information provisions apply. The contract enforces removal of government identification from non-accepted items and incorporates technical requirements from the DLA Master List. All materials must be shipped to DLA Distribution Depot Hill, Hill AFB, UT, with transportation governed by DLAD procedural notes C19 and C20. The procurement number is SPE4A5-26-Q-0574, with a purchase request ID of 7016227462 and a required ship date of November 25, 2028.

POSTED

about 2 hours ago

DEADLINE

in 14 days
View Details
NAICS: 333995
New
DIBBS
ROD AND PISTON, ACTU
Solicitation # SPE4A5-26-R-0270
The contract pertains to the procurement of 266 Rod & Piston, ACTU units with NSN 2915-012187655 and part number 2665806, classified as a Critical Safety item requiring a higher-level quality system. Delivery is mandated 167 days after receipt of order to a designated location, with FOB at origin and inspection and acceptance occurring at the destination. The solicitation is issued under an unrestricted solicitation using other than full and open competition and is anticipated to be awarded against the OEM’s Basic Ordering Agreement, with the RFP scheduled for release on or about August 12, 2026, and responses due by September 12, 2026. Offers exceeding $900,000 require a subcontracting plan, while those over $10,000,000 must include certified cost and pricing data in addition to a subcontracting plan. All offerors must be registered in the System for Award Management (SAM) to be eligible for award. Alternate offerors must submit a Source Approval Request package along with a completed solicitation copy to be considered; failure to submit sufficient documentation in time will result in exclusion from this procurement, though approval may qualify them for future opportunities. Award decisions will be based on price, past performance, and other factors assessed through the Supplier Performance Risk System. The procuring activity is DLA Aviation, with primary point of contact Jason Balsiger, and performance will occur in Richmond, Virginia.
Fluid Power Cylinder and Actuator Manufacturing

POSTED

about 2 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 334514
New
DIBBS
INDICATOR, SIGHT, LIQ
Solicitation # SPE4A5-26-T-337Z
The contract pertains to the procurement of one unit of an Indicator, Sight, Liquid, identified by NSN 6680-01-170-0724, with a delivery requirement of 20 days from contract award. Delivery is FOB destination, with inspection and acceptance also occurring at the destination. The item must be packaged in strict compliance with MIL-STD-2073-1E, including specific preservation methods, wrapping materials, and container codes, and marked according to MIL-STD-129 with the special marking code 05 indicating it is a delicate instrument. Palletization must adhere to DLA packaging requirements, and mercury or mercury-containing compounds are strictly prohibited in preservation, packaging, and marking unless explicitly exempted for functional components such as batteries or sensors specified by NAVSEA, with those exempted items requiring shock-proof construction and a secondary containment layer. Sampling and quality assurance follow MIL-STD-1916 or an equivalent zero-based plan, with acceptance criteria mandating zero non-conformances unless otherwise stated. The contract incorporates technical and quality requirements from the DLA Master List, and the applicable revision is controlled by the solicitation issue date. The item is to be delivered to USS ASHLAND LSD 48, FPO AP 96660, with shipping required via the fastest traceable means, explicitly excluding parcel post. The original required delivery date is August 4, 2026, and the contract is issued under solicitation SPE4A5-26-T-337Z by the Department of Defense, with Hien-Van Trinh as the point of contact.
Totalizing Fluid Meter and Counting Device Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 333611
New
DIBBS
SEAL, AIR, AIRCRAFT G
Solicitation # SPE4A5-26-T-338E
This contract pertains to the procurement of a SEAL, AIR, AIRCRAFT G component identified by NSN 2840017297710 and part number 315T4100-11, with a quantity of seven units required for delivery within 124 days. The item is classified as a Critical Application Item and must comply with stringent technical and quality requirements referenced from the DLA Master List, including adherence to MIL-STD-1916 or ASQ H1331 sampling standards with zero non-conformances allowed in the sample lot. The component is subject to FAA airworthiness approval requirements, though unique identification is waived per customer request, and must meet FAA Bare Item Marking Requirements and preservation, packaging, and marking standards outlined in MIL-STD-2073-1E and MIL-STD-129 without special marking. Supply chain traceability documentation must be retained by the contractor per DLA Directive Procurement Note C03, and cybersecurity maturity must be assessed at CMMC Level 2 via self-certification. The product must be delivered FOB origin to the DLA Distribution facility in New Cumberland, Pennsylvania, with packaging and palletization conforming to DLA-specific requirements. Delivery is scheduled for May 3, 2026, with a contractual deadline of November 28, 2026, and inspection and acceptance occur at the destination. All technical and quality specifications are controlled by the version of the DLA Master List in effect on the contract award date.
Turbine and Turbine Generator Set Units Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332996
New
DIBBS
TUBE ASSEMBLY, METAL
Solicitation # SPE4A5-26-T-338B
The contract is for a single unit of a metal tube assembly, part number 68A691949-1001, with NSN 4710014480994, supplied to the U.S. Department of Defense under solicitation SPE4A5-26-T-338B. Delivery is required within five days to Robins Air Force Base, Georgia, with FOB origin terms and no quantity variance allowed. Inspection and acceptance occur at the destination. The item is designated as a critical application, and all technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersede other standards. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization adhering to DLA-specific packaging guidelines, and the use of parcel post is strictly prohibited. All shipments must be sent via the fastest traceable means. The manufacturer must meet non-tailored ISO 9001:2015 quality requirements and follow configuration change management and variance request protocols. Sampling adheres to MIL-STD-1916 or approved zero-based plans, with acceptance criteria requiring zero non-conformances unless otherwise specified. Unit identification is not required per the service customer's request. The contract includes specific documentation, packaging, labeling, and shipping instructions, with the point of contact being Annette Pruett. The original delivery date is August 3, 2026.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334512
New
DIBBS
GAGE, PRESSURE, DIAL IND
Solicitation # SPE4A5-26-T-338C
The contract is for the procurement of 20 pressure dial indicating gages with NSN 6685-01-463-2970 under solicitation SPE4A5-26-T-338C, with delivery required within 86 days of award. The item is subject to stringent quality and technical requirements referenced from the DLA Master List, including tailored higher-level quality provisions applicable to both manufacturers and non-manufacturers, and mandates sampling in accordance with MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance criteria unless otherwise specified. Attributes are classified with verification levels or AQLs of VII, IV, and II for critical, major, and minor characteristics respectively, with unspecified attributes treated as major. Inspection and acceptance must occur at the origin, and all technical data associated with the item is controlled under export regulations, either ITAR or EAR, restricting disclosure to foreign persons regardless of location. Compliance with DFARS 252.225-7048 is required, and only contractors with approved US/Canada Joint Certification Program status, completion of DOD export control training, and DLA authorization may access the controlled technical data. Cybersecurity requirements mandate CMMC Level 2 certification for third-party assessors, and physical identification and marking of the item must conform to RQ017 standards. Government identification must be removed from non-accepted supplies per RQ011, and covered defense information is governed by RD002. The place of performance is Tracy, California, and the primary point of contact is Jalon Lynch with the Department of Defense.
Automatic Environmental Control Manufacturing for Residential, Commercial, and Appliance Use

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334519
New
DIBBS
SHAFT ASSEMBLY, FLEX
Solicitation # SPE4A5-26-T-338D
The contract is for the procurement of 17 units of a flexible shaft assembly, identified by NSN 6680-00-798-3059 and part number M10215-1F112, manufactured in compliance with MIL-DTL-10215P Revision P dated June 3, 2025. The item must adhere to all technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with components subject to Qualified Products List or Qualified Manufacturers List qualifications. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331 Table 1, or a comparable zero-based sampling plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II respectively, or AQLs of 0.1, 1.0, and 4.0. Zero non-conformances are required in sample lots unless otherwise specified. Packaging must conform to MIL-STD-2073-1E with preservative method 10, and marking must align with MIL-STD-129, without special markings. Palletization follows DLA packaging requirements. Delivery is FOB origin, with inspection and acceptance occurring at destination. The required delivery date is February 26, 2027, with a 191-day lead time from contract award. The unit of issue is each, with no quantity variance permitted. The shipping destination is the DLA Distribution facility in New Cumberland, Pennsylvania. The contract solicitation number is SPE4A5-26-T-338D, issued on August 10, 2026, with proposals due by August 18, 2026, under NAICS code 334519, and is managed by the Department of Defense’s ASC Supplier Oper OEM Division.
Other Measuring and Controlling Device Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332996
New
DIBBS
RETAINER, COUPLING
Solicitation # SPE4A5-26-T-338G
The contract pertains to the procurement of a Retainer, Coupling, identified by part number 555-3115-501 and NSN 4730-01-559-0320, with a total quantity of 216 units to be delivered FOB origin within 405 days. The item is classified as a Commercial Off the Shelf (COTS) product, and while Item Unique Identification is not required, the supplier must comply with all applicable DLA Master List of Technical and Quality Requirements, which supersede other standards such as ASTM D3951. Packaging must adhere to MIL-STD-129 for marking and labeling, and palletization must meet DLA’s RP001 packaging requirements. The delivery destination is DLA Distribution Warner Robins at Robins Air Force Base, Georgia, with inspection and acceptance occurring at the destination. The supplier must also complete a Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment and comply with requirements for Covered Defense Information under RD002. The purchase request number is 7014383879, the unit price is $216.00 totaling $46,656, and the original required delivery date is October 26, 2027, with a needed ship date of May 3, 2026. The solicitation number is SPE4A5-26-T-338G, issued by the Department of Defense, with Cynthia Duval as the primary point of contact.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334519
New
DIBBS
TRANSMITTER, LIQUID
Solicitation # SPE4A5-26-T-338F
The item is a liquid transmitter identified as a commercial item, sourced under solicitation SPE4A5-26-T-338F with a quantity of four units, and a delivery deadline of 165 days after award. Technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date depending on acquisition size. The contractor must comply with DLA packaging specifications, cybersecurity maturity model certification level 2 requirements through a certified third-party assessment organization, and configuration change management protocols requiring formal engineering change proposals for any deviations. Export control restrictions apply due to the presence of technical data subject to ITAR or EAR, mandating prior government authorization for any export or disclosure to foreign nationals, even within the United States, and limiting access only to DLA-approved contractors holding JCP certification, who have completed required training and questionnaire approvals. Physical marking of the item is required per RQ017, though unique identification is waived per customer request under DFARS 252.211-7003. Covered defense information protocols and removal of government identification from non-accepted supplies are also mandated. The point of contact is Francis Polakiewicz, with performance located at Robins AFB, Georgia, and responses due by August 18, 2026.
Other Measuring and Controlling Device Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
AXLE, LANDING GEAR
Solicitation # SPE4A5-26-T-338H
Offerors bidding on this solicitation must comply with strict domestic sourcing requirements, including the Berry Amendment and Buy American Act, with a lowered threshold of $150,000, and must disclose any non-domestic materials used in their proposal. The use of covered telecommunications equipment or services is prohibited under FAR and DFARS clauses, and all offers must affirm they will not supply such items. Small business joint ventures must submit specific representations for eligibility categories including small business, service-disabled veteran-owned, women-owned, economically disadvantaged women-owned, and HUBZone status. Vendors must provide quantity ranges in their quotes due to fluctuating demand, as manual evaluation allows for flexible adjustments without resolicitation, though this does not apply to Auto IDC. Submission of a “No Bid” on DIBBS is strongly encouraged for those anticipating delayed or non-participation to avoid assumptions of non-responsiveness. All contractors must register through DLA’s new AMPS system within two months to maintain access to the Vendor Shipment Module and continue shipping to DLA; VSM WebServices users must also update their internal schema to avoid disruption. Additive manufacturing is prohibited unless specifically approved, and any proposal including AM-produced items will be disqualified. The solicitation pertains to an AXLE, LANDING GEAR with NSN 1620-01-158-5930, quantity of 40 units, delivery required within 202 days ADO, and response is due by August 18, 2026. Fast Pay is not applicable, and APEX Accelerators are available at no cost to assist businesses with government contracting support.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332911
New
DIBBS
VALVE, SAFETY RELIEF
Solicitation # SPE4A5-26-Q-0677
The contract is for the procurement of 77 units of a safety relief valve identified by NSN 4820-01-313-1011 and part number 39E14-1 from Honeywell International Inc. This is a commercial item designated as a Navy-critical safety item, requiring strict compliance with technical and quality specifications referenced from the DLA Master List, including mandatory adherence to MIL-STD-1916 or ASQ H1331 for sampling, with zero non-conformances expected unless otherwise specified. The item must be manufactured and tested using limited rights data accessible only to approved vendors, and source approval documentation is required for any new supplier. All units must meet critical characteristics including material compatibility with MIL-L-7808, passage of rated flow and proof pressure tests per drawing notes, and be marked in accordance with MIL-STD-129 including lot and serial numbers, manufacturer’s CAGE code, and part number. Packaging must conform to MIL-STD-2073-1E and DLA packaging requirements, with no special marking beyond standard requirements. The contract specifies a firm fixed price with no variance allowed in quantity, inspection and acceptance at origin, and delivery within 141 days after award. The item is subject to cybersecurity maturity model certification level 2 self-assessment and controlled under provisions for covered defense information. Measuring and test equipment must comply with RT001 standards, and non-conforming items must have government identification removed. The valve is source-controlled and requires traceability to approved sources; vendors without access to the technical data package or without existing approval must submit a source approval request. Delivery is FOB origin to the specified DLA warehouse in Tracy, California, with transportation handled per DLA procedural notes. The purchase request is 7015248083, and delivery is scheduled for November 21, 2026. The solicitation was posted August 10, 2026, with responses due by August 14, 2026.
Industrial Valve Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332510
New
DIBBS
HINGE, BUTT
Solicitation # SPE4A5-26-Q-0678
The contract is for the procurement of 29 units of a hinge, butt component identified by NSN 5340-01-483-4203, with a delivery requirement of 167 days after award. The solicitation number is SPE4A5-26-Q-0678, with a response deadline of August 21, 2026, and was posted on August 10, 2026. Technical and quality requirements referenced in this contract are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the acquisition type and timing of amendments. Packaging must comply with DLA standards, and tailored higher-level quality requirements apply to both manufacturers and non-manufacturers. Government identification must be removed from rejected supplies, and bare items must be physically marked per specification. Item Unique Identification is not required per the Service customer’s request. Technical data associated with this item is subject to export control under ITAR or EAR, with disclosure to foreign persons—whether in the U.S. or abroad—requiring prior authorization. Access to this controlled data is restricted to contractors who hold a valid US/Canada Joint Certification Program certification, have completed mandatory DOD export control training and the DLA questionnaire, and have been formally approved by DLA. The contract is managed by the ASC SUPPLIER OPER OEM DIVISION under the Department of Defense, with Sarah Cave as the primary point of contact.
Hardware Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details