Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Siemens BAS Controls Specialist

Active

State & Local

Response Deadline11/23/2026, 08:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for the Parkland Health and Hospital System involves the supply, installation, and integration of specialized exhaust valves for pharmacy projects. The scope of work specifically requires the installation of two Siemens-controlled laboratory exhaust valves and their full integration into the existing Siemens Building Automation System. This process includes all necessary programming and functional performance testing to ensure the valves are fully operational and BAS-controlled. To ensure technical compliance, the project mandates the use of a Siemens certified technician. The contract is categorized under NAICS code 238290, with a response deadline set for November 23, 2026. The primary objective is the delivery of a fully integrated and functional exhaust system that meets the specialized requirements of the hospital's pharmacy facilities.

General Info

Install and integrate two Siemens exhaust valves for Parkland Health pharmacy by 2026.

Agency

Texas → Parkland Health and Hospital System

NAICS

238290 - Other Building Equipment Contractors

Place of Performance

Not specified

Set-Aside

NONE

Documents

This scope was carved out of 2043995.

The full solicitation package (11 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

IFB# 2043995 Moody Clinic Compound Pharmacy Exhaust Duct Mod

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 21

subcontract

Response DeadlineNov 23

Submission deadline

Response Deadline

11/23/2026, 08:00:00 PM UTCin about 1 month

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyTexas → Parkland Health and Hospital System

ContactsNo contacts available

OfficeN/A

Organization / AgencyTexas → Parkland Health and Hospital System

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies, installs, and integrates specialized exhaust valves for prime contractors on Parkland Health and Hospital System pharmacy projects. Installs two Siemens-controlled laboratory exhaust valves and integrates them with the existing Siemens Building Automation System (BAS), including programming and functional performance testing. Requires Siemens certified technician. Delivers operational BAS-controlled exhaust valves.

Similar Contracts

Same NAICS industry code

Centennial JCC Panic Hardware Services (Electrical Room Egress Doors)

Solicitation # Panic Hardware (Electrical Room Egress Doors)

Management & Training Corporation (MTC) is soliciting bids for the installation of commercial-grade panic hardware on electrical room egress doors at the Centennial Job Corps Center in Nampa, Idaho. The project encompasses five specific locations: the Cafeteria, Men's Dorm, Women's Dorm, Recreation area, and Vocational building. The selected contractor must supply and install Grade I heavy-duty panic bars, exterior trim, rim cylinders, strikes, and door closers. All work must adhere to NEC 2023 Article 110.26(C)(3), NFPA 101 Life Safety Code, and ADA standards. Performance verification requires a minimum of 10 consecutive cycle tests to ensure fail-safe operation and smooth functionality. This is a fee-for-service subcontracting opportunity set aside for small businesses, including VOSB, SDVOSB, WOSB, and HUBZone certifications. Bidders must be licensed in the State of Idaho and provide three references for similar projects. Required submission documents include a bid sheet with lump sum and per-deficiency pricing, a W-9, a supplier self-certification form, and an acceptance of terms and conditions. All bids must be emailed to Sandra Clore by December 1, 2026, at 3:00pm MST. The contract is subject to various federal regulations, including Davis-Bacon Act prevailing wage rates, FAR safety and overtime standards, and strict information security and privacy breach notification requirements.

Management & Training Corporation/Centennial Job Corps Center

POSTED

about 7 hours ago

DEADLINE

in about 1 month

041-26 ¿ Commercial Laundry Equipment and Installation - Forum River Center

Solicitation # PE-65750-NONST-2026-000000051

The City of Rome, Georgia, is soliciting bids for the procurement and installation of commercial laundry equipment at the Forum River Center. This solicitation, identified by number PE-65750-NONST-2026-000000051, was posted on October 21, 2026, and requires all responses to be submitted by the deadline of November 12, 2026, at 7:00 PM. The project is managed by the City of Rome as a SLED organization, with Jackson Abercrombie serving as the primary point of contact. Performance of the contract will take place within the state of Georgia. Interested parties can find further details and submission guidelines through the provided Georgia procurement portal link.

POSTED

about 15 hours ago

DEADLINE

Vehicle Lift Gate InstallationThis subcontract involves the supply and installation of a lift gate system for prime contractors working on City of Cheyenne Sanitation Division projects. The scope of work requires the installation of a hydraulic or electric lift gate assembly and power unit on the rear of a 14-foot bed, ensuring the system is compatible with a 15,000 GVWR chassis. The final deliverable must be a fully operational installed lift gate that includes a manufacturer's warranty. The opportunity is managed by the Wyoming Purchasing agency under NAICS code 238290. Interested parties must submit their responses by the deadline of November 16, 2026.

POSTED

about 16 hours ago

DEADLINE

Conveying SystemsThis subcontract opportunity is for the installation, modernization, or repair of elevators, lifts, and other conveying systems for the Town of Winchendon School Department facility projects. The selected contractor will work under prime contractors to deliver fully certified and operational systems. A mandatory requirement for this engagement is DCAMM Certification in Conveying Systems. The project is located in Winchendon, Massachusetts, under NAICS code 238290. Interested parties must submit their responses by the deadline of November 24, 2026.

TOWSD21 - School Department

POSTED

about 23 hours ago

DEADLINE

in about 1 month

Kitchen Elevator Upgrade and Repair Service - NHSP-M

Solicitation # RFP NHDOC 2027-07

The New Hampshire Department of Corrections is soliciting proposals for a firm fixed price or not-to-exceed contract to provide comprehensive upgrades and repairs for a 1985 Dover Corporation passenger elevator at the New Hampshire State Prison for Men. The elevator, which serves two floors of the kitchen and has a 4,000-pound capacity, requires a new power unit including the motor, hydraulic valve, pump, oil reservoir, and muffler, as well as the installation of four security key switches and eight keys. All work must be performed by New Hampshire licensed professionals and comply with all local, state, and federal elevator codes, with final safety test results submitted to the New Hampshire Department of Labor. The project is expected to start in January, with a final completion deadline of June 30, 2027. Proposals are due by 2:00 PM EST on November 13, 2026, and must be submitted as separate sealed technical and cost proposals. Evaluation is based on a combined score of the technical proposal, which focuses on organizational experience, correctional facility expertise, and approach, and the cost proposal. Award selection may involve a Best and Final Offer process. Selected vendors must maintain significant insurance coverages, including commercial general liability of at least 1 million dollars per occurrence, and adhere to strict correctional facility security protocols, including tool inventories and compliance with PPD 371. Payment will be issued within 30 days of receiving approved monthly itemized invoices.

Department Of Corrections

POSTED

about 24 hours ago

DEADLINE

Mechanical Installation & RiggingThis subcontract for Mechanical Installation and Rigging involves the removal and installation of centrifuge conveyors for prime contractors working on City of Haverhill wastewater treatment projects. The scope of work includes the disassembly and hauling of old conveyors, as well as the rigging and hoisting of new systems using precision alignment tools to ensure a fully installed and mechanically aligned final product. The project is located on Summer Street in Haverhill, Massachusetts, and is managed through the Purchasing Department. Interested parties must note the response deadline of November 6, 2026, for this opportunity which falls under NAICS code 238290.

1279COH01 - Purchasing Dept.

POSTED

DEADLINE

Comprehensive Elevator Maintenance and RepairThis subcontract for Comprehensive Elevator Maintenance and Repair supports prime contractors on Caltrans facility projects located in San Bernardino, California. The scope of work includes performing preventive maintenance, routine and non-routine repairs, and safety inspections for both low-rise and high-rise geared and hydraulic passenger elevators. Key technical requirements involve monthly lubrication, adjustments, and five-year full load tests witnessed by DOSH to ensure the delivery of safety-certified systems and detailed maintenance records. Qualified providers must employ journey-level elevator service mechanics who are fully compliant with CCR Title 8. The opportunity is associated with NAICS code 238290 and is managed under the California Department of Transportation. Interested parties must submit their responses by the deadline of November 17, 2026.

California Department of Transportation

POSTED

DEADLINE

Request for Prequalification of Bidders and Prequalification Instructions for ADA Lift Replacement Projects at Various City Facilities

Solicitation # 27-350-11

The City of Beverly Hills Department of Public Works is seeking to prequalify elevator and lift contractors for the installation, modernization, and replacement of wheelchair lifts at various city facilities. This prequalification process, identified as RFQ 27-350-11, is intended to establish a list of qualified bidders for upcoming projects over the next five years. The scope of work includes full installation and modernization of vertical transportation equipment, as well as all necessary work performed by other trades. To be eligible, contractors must demonstrate experience with elevator modernization or replacement projects valued at $500,000 or more, or wheelchair lift projects valued between $250,000 and $500,000 or more. Applicants must submit a comprehensive prequalification questionnaire via PlanetBids by 5:00 PM on October 26, 2026. Required supporting documentation includes reviewed or audited financial statements, a notarized surety statement from an admitted insurer, evidence of California Apprenticeship Council approval, and documentation regarding any prevailing wage or apprenticeship violations. Evaluation is based on objective criteria across three categories: business history and organizational performance, compliance with occupational safety and health laws, and project completion and capability. Contractors must achieve minimum passing scores in the first two categories to qualify. Strict compliance and insurance requirements are in place, including a minimum liability insurance policy of $2,000,000 per occurrence. Successful bidders will eventually be required to provide a 10% bidder's security and 100% performance and payment bonds. Certain disclosures regarding criminal history, fraud, or license revocations within the last five years may lead to immediate disqualification. All submissions must be certified under penalty of perjury under the laws of the State of California.

Public Works Department of City of Beverly Hills

POSTED

DEADLINE

IFB No. 133713 FMS 25 Multiple Roll-up Door Repairs and Preventative Maintenance, Hammer Field Armory

Solicitation # 133713

The California Military Department is soliciting bids for IFB No. 133713 to provide comprehensive repairs and five-year preventative maintenance for multiple roll-up doors at the Hammer Field Armory in Fresno, California. The scope of work includes targeted component replacement, safety and control system upgrades, and one full door replacement to ensure operational reliability. The selected contractor must complete all work within 120 calendar days and is required to possess a CSLB D-28 Doors, Gates and Activating Devices license. Award will be granted to the lowest responsive and responsible bidder, with a 25 percent Small Business participation goal and a 5 percent Disabled Veteran Business Enterprise goal. Prospective bidders must attend a mandatory pre-bid job walk on October 26, 2026, at 10:00 AM at the Hammer Field Armory. All questions must be submitted by November 2, 2026, and final electronic bid submissions are due as a single PDF by November 16, 2026, at 2:00 PM. Required documentation includes a completed rate sheet and various certifications, including the Iran Contracting Act Verification and a Non-Collusion Affidavit. For projects exceeding 24,999.99 dollars, bid bonds of 10 percent and payment bonds of 100 percent are required. The contract is subject to State General Prevailing Wage Rates and the Buy American Act.

California Military Department

POSTED

DEADLINE

Window Installation ServicesThis subcontract for Window Installation Services involves performing specialized work for prime contractors at the Texas Department of Criminal Justice Hilltop Unit in Gatesville, Texas. The scope of work includes the removal of existing window units, preparation of openings, installation of new units, and the completion of all necessary sealing and final adjustments to deliver fully operational window systems. Due to the nature of the worksite, the contractor must strictly adhere to all correctional facility security protocols. The project is categorized under NAICS code 238290, with a response deadline set for November 11, 2026.

Texas Department of Criminal Justice

POSTED

DEADLINE

Custom Modular Equine Stall FabricatorThis subcontract agreement involves the fabrication and delivery of custom modular equine stall systems for prime contractors working on projects for the Commonwealth of Kentucky Department for Facilities and Support Services. The scope of work requires the production of stall frames using 14-gauge 2-inch square galvanized tubes with a powder-coated finish, paired with 1-inch diameter grillwork tubes spaced 3 inches on center and light gray HDPE panels. The selected fabricator is responsible for the complete manufacturing process and the delivery of all modular components directly to the designated project sites. This opportunity is categorized under NAICS code 238290 and is associated with the state of Kentucky, with a response deadline set for November 6, 2026.

Dept- Environmental Protection

POSTED

DEADLINE

DDC Control System UpdatesThis subcontract opportunity involves updating Direct Digital Control systems for prime contractors working on facility projects at SUNY Binghamton University. The scope of work includes programming control logic, installing sensors and actuators, and integrating new boilers and chillers into the existing building automation system to ensure a fully operational DDC control system. The project is categorized under NAICS code 238290 and is managed by the State University of New York. Interested parties must submit their responses by the deadline of November 12, 2026.

State University of New York (SUNY)

POSTED

DEADLINE

More opportunities from Texas → Parkland Health and Hospital System

Same awarding agency

Siemens Valve SupplierThis subcontract agreement establishes the procurement and delivery of Siemens-controlled laboratory exhaust valves for pharmacy projects within the Parkland Health and Hospital System in Texas. The supplier is responsible for providing two specific hardware valves that must adhere strictly to original equipment manufacturer specifications and delivering them directly to the designated project site. The procurement process is categorized under NAICS code 423810. The solicitation was posted on October 21, 2026, with a response deadline set for November 23, 2026. This arrangement ensures that prime contractors have the necessary specialized components to complete the laboratory exhaust systems for the healthcare facility.

Construction and Mining (except Oil Well) Machinery and Equipment Merchant Wholesalers

POSTED

about 18 hours ago

DEADLINE

in about 1 month

HVAC TAB ServicesThis subcontract for HVAC TAB Services involves performing air balancing and system verification for prime contractors on pharmacy projects within the Parkland Health and Hospital System in Texas. The selected provider will be responsible for the testing, adjusting, and balancing of HVAC systems, which includes conducting field surveys and establishing baseline measurements to ensure proper room airflow relationships. To qualify for this engagement, the contractor must hold NEBB or AABC certification. Key deliverables include the submission of a written Evaluation Summary and comprehensive final TAB reports. The solicitation was posted on October 21, 2026, with a response deadline of November 23, 2026.

Engineering Services

POSTED

about 18 hours ago

DEADLINE

in about 1 month

HVAC Exhaust Ductwork ContractorThis subcontract opportunity is for an HVAC Exhaust Ductwork Contractor to support prime contractors on pharmacy projects for the Parkland Health and Hospital System in Texas. The scope of work involves the installation of two new exhaust duct runs specifically for the Ante Buffer Room and the Non-Hazardous Mixing Room, ensuring both are properly connected to the existing exhaust plenum. All installations must strictly adhere to code requirements for an ISO 7 Compounding Pharmacy environment. The project is categorized under NAICS code 238220, with a response deadline set for November 23, 2026. The final deliverable is the successful installation and connection of the specified exhaust duct runs.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

about 18 hours ago

DEADLINE

in about 1 month

IFB# 2043995 Moody Clinic Compound Pharmacy Exhaust Duct Mod

Solicitation # 2043995

Solicitation IFB 2043995 is a single-award, fixed-price contract issued by the Dallas County Hospital District dba Parkland Health. The project requires a contractor to provide all labor, materials, and equipment to modify the existing HVAC exhaust system serving the ISO 7 Moody Outpatient Center Compounding Pharmacy located at 5151 Maple Ave., Dallas, Texas. Key responsibilities include performing a field survey of the existing exhaust system and Siemens BAS controls, executing the duct modifications, and performing testing, adjusting, and balancing (TAB) to ensure approved airflow and environmental conditions. Deliverables include a written evaluation summary of baseline measurements, a fully operational modified system, and final closeout documentation consisting of TAB reports, controls test results, and as-built drawings. The contract will be awarded to the lowest priced, responsible bidder based on an evaluation of acceptability, pricing, and the bidder's financial stability, past performance, and legal qualifications. Bidders must submit a comprehensive package including a signed cover sheet, acceptance of non-negotiable contract terms, a completed bid form, and M/WBE proposition documents. For contracts exceeding 25,000 dollars, 100 percent performance and payment bonds are required. Compliance requirements include certifications against the boycott of Israel and energy companies, adherence to the Texas Public Information Act, and compliance with the Contractor Construction Safety Program. Payment is processed within 30 days of receiving an accurate invoice, which must be submitted within 60 days of the service date.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

about 18 hours ago

DEADLINE

in about 1 month

Medical Inventory and Consignment Management ServicesThis subcontract for Medical Inventory and Consignment Management Services supports prime contractors on projects for the Parkland Health and Hospital System in Texas. The selected provider is responsible for the comprehensive management of onsite consignment inventory, specifically focusing on the regular stocking, replenishment, and product rotation of durable medical equipment. The contractor must ensure a compliant inventory by adhering to OSHA warehouse safety standards and manufacturer storage requirements. Critical operational duties include managing product recalls and the removal of expired or defective items within three business days of notification. The solicitation was posted on October 14, 2026, with a response deadline of November 11, 2026.

General Warehousing and Storage

POSTED

DEADLINE

DME Clinical Fitting and Education SpecialistThe DME Clinical Fitting and Education Specialist subcontract involves providing specialized clinical fitting and sizing of durable medical equipment for prime contractors working on Parkland Health and Hospital System projects. The scope of work includes performing professional adjustments of boots, splints, and braces to ensure medical efficacy, utilizing orthopedic sizing tools, and providing essential patient education on the correct use of the equipment. All services must be delivered in strict adherence to HIPAA standards to ensure patient privacy and regulatory compliance. This opportunity is categorized under NAICS code 621512 and is associated with the Parkland Health and Hospital System in Texas. The solicitation was posted on October 14, 2026, with a response deadline set for November 11, 2026. The primary objective of the contract is to ensure that patients receive properly fitted medical equipment and the necessary knowledge for safe and effective usage.

Diagnostic Imaging Centers

POSTED

DEADLINE

Durable Medical Equipment (DME) Product SupplierThis subcontract agreement establishes a partnership for the supply of FDA-approved durable medical equipment and consumables to support prime contractors working on Parkland Health and Hospital System projects. The scope of work includes the provision of essential medical items such as elastic bandages, underarm aluminum push-button crutches, post-op semi-rigid shoes, braces, splints, and slings. All delivered products must be new, clean, and strictly adhere to the manufacturer's documentation. Logistically, the supplier is responsible for delivering all medical equipment and supplies directly to the Parkland Employee Health Center. This procurement opportunity falls under NAICS code 423450 and is managed by the Parkland Health and Hospital System in Texas, with a response deadline set for November 11, 2026.

Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

DEADLINE

RFP-2010569 Workers Compensation Durable Medical Equipment

Solicitation # RFP-2010569

Parkland Health and Hospital System is soliciting proposals under RFP-2010569 for a qualified Durable Medical Equipment (DME) supplier to support the Parkland Employee Health Center. The selected contractor will be responsible for providing, maintaining, and replenishing an inventory of medical equipment, such as braces, splints, and crutches, used to manage occupational injuries and illnesses for employees. Key deliverables include clinical support for fitting and sizing, providing product documentation, and adhering to strict performance KPIs, including a 95 percent replenishment rate for standard and urgent items within three business days. The contract consists of a three-year base term with a two-year option period. The award will be based on a best-value selection process, weighing general requirements and the statement of work at 45 percent, pricing at 25 percent, and organizational overview and key personnel at 20 percent. Offerors must meet pass/fail qualifications and provide M/WBE certifications through recognized agencies. Compliance requirements include adherence to HIPAA, FDA, and OSHA standards, as well as warranties against contracts with foreign terrorist organizations. Invoicing occurs monthly with a 30-day payment term. Proposals must be submitted in a specific five-volume format, with pricing provided separately in Excel, and must not exceed 50 pages.

Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

DEADLINE

Urgent Medical Equipment Delivery ServicesThe Urgent Medical Equipment Delivery Services subcontract involves the rapid transport of durable medical equipment for prime contractors operating on Parkland Health and Hospital System projects. The service provider is responsible for delivering equipment to hospital extensions within a strict three-hour window, ensuring that all deliveries are documented with 100% patient signature verification to facilitate accurate invoicing. To qualify, the provider must utilize HIPAA-compliant personnel and employ mobile signature technology for real-time verification. Additionally, the contractor must maintain vehicles capable of transporting oversized bariatric items. The primary deliverables for this engagement include the successful delivery of medical equipment and the submission of verified signature logs.

Couriers and Express Delivery Services

POSTED

DEADLINE

Patient Hygiene and Commode SupplyThis subcontract for the Parkland Health and Hospital System involves the supply of specialized bathroom safety and hygiene equipment to prime contractors. The scope of work focuses on providing 3-in-1 Commodes with a 300 lbs capacity and Drop-Arm Commodes, both of which must be constructed from medical-grade plastics and corrosion-resistant metals. All equipment is required to meet strict DME safety and weight-bearing certifications to ensure patient safety. The contractor is responsible for the delivery of completed commode units directly to the prime contractor. This opportunity is categorized under NAICS code 339113, with a response deadline set for November 10, 2026.

Surgical Appliance and Supplies Manufacturing

POSTED

DEADLINE

Respiratory Therapy Equipment SupplyThe Respiratory Therapy Equipment Supply subcontract involves the provision of electronic medical devices for respiratory support to prime contractors working on Parkland Health and Hospital System projects in Texas. The scope of work includes the delivery of CPAP machines, BIPAP machines, suction machines, and nebulizers, along with their associated starter kits. To ensure patient safety and regulatory adherence, all supplied devices must be FDA-approved and fully compliant with Class II medical device regulations. This opportunity is categorized under NAICS code 423450. The solicitation was posted on October 13, 2026, with a response deadline set for November 10, 2026. Interested parties can find further details and submission guidelines through the Parkland Health and Hospital System supplier portal.

Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

DEADLINE

Mobility Aids and Wheelchair SupplyThis subcontract for Mobility Aids and Wheelchair Supply supports prime contractors working on projects for the Parkland Health and Hospital System in Texas. The scope of work involves the wholesale supply of manual and bariatric wheelchairs with widths ranging from 16 to 30 inches, including specialized recliner models and units with elevated leg rests. Additionally, the contract covers the provision of mobility accessories such as walkers, rollators, canes, and quad canes. All provided equipment must adhere to medical device safety standards for durable medical equipment. The selected supplier is responsible for delivering the physical hardware directly to the prime contractor's designated warehouse or hub. The solicitation was posted on October 13, 2026, with a response deadline of November 10, 2026.

Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS