Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Slurry Seal Application

Active

State & Local

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Caltrans, District 7 - Los Angeles, has issued a subcontract for the application of a slurry seal to State Route 138 in Palmdale, aimed at extending the lifespan of the pavement surface. The work involves spreading a thin layer of emulsified asphalt blended with sand and fine aggregate to restore and protect the road surface, enhancing its durability and resistance to weathering and traffic wear. The contract was posted on July 17, 2026, and falls under NAICS code 237310, which classifies it as highway and street construction. The performance location is specifically identified as Palmdale, with no additional details provided on the contracting office or point of contact. The project is part of broader infrastructure maintenance efforts under California’s state transportation program and can be referenced through the provided link to the Caltrans CEQA network.

General Info

Slurry seal applied to SR-138 in Palmdale to extend pavement life under Caltrans District 7.

Agency

California → Caltrans, District 7 - Los Angeles

NAICS

237310 - Highway, Street, and Bridge ConstructionView NAICS

Place of Performance

Palmdale, CA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 17

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyCalifornia → Caltrans, District 7 - Los Angeles

ContactsNo contacts available

OfficeN/A

Organization / Agency

California → Caltrans, District 7 - Los Angeles

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Application of a thin layer of slurry seal using emulsified asphalt, sand, and fine aggregate to extend pavement life on State Route 138.

Similar Contracts

Same NAICS industry code

Fleet Fast EV Charging - ConstructionThe Port of Seattle's Aviation Project Management Group is forecasting a construction contract for fleet fast electric vehicle charging infrastructure, targeting contractors with expertise in electrical and transportation-related construction under NAICS code 237310. The project is expected to involve the design and installation of high-capacity EV charging systems to support fleet operations, though specific scope details such as the number of charging stations, power requirements, or site locations are not yet provided. The anticipated posting date is July 21, 2026, with no set-aside provisions indicated, suggesting the opportunity is open to all qualified bidders. Primary point of contact is Angela Peterson, reachable via email and phone, with Katie Techa serving as the project manager for technical inquiries. All formal solicitation details will be published through the Port of Seattle’s official procurement portal, and interested parties should monitor the provided UI link for further updates.

Aviation Project Management Group

POSTED

about 8 hours ago

DEADLINE

Fisherman’s Terminal (FT) Entry and Exit Paving RedevelopmentThe Fishermen’s Terminal Entry Redevelopment Project will transform the entry and exit drives along 19th Avenue West, along with the remaining footprint of the Downie Building (C-14), by replacing deteriorated pavement, upgrading stormwater infrastructure, and integrating sustainable design elements. Existing combined sewer lines will be separated from stormwater flows through expanded and upgraded drainage systems, with qualifying pavement surfaces receiving water quality treatment components. The demolition of the residual C-14 slab will make way for a blend of new parking spaces and green infrastructure, including pollinator habitats and a potential stormwater treatment facility, all supported by a new irrigation system and enhanced landscaping in the entry median. Electric vehicle charging stations will be installed within the newly configured parking areas. The project also prioritizes multimodal connectivity by adding a protected two-way bike lane linking the terminal to the West Wall bike path, improving pedestrian access to the intersection at 21st Avenue West and W Emerson Place, and enhancing access to the King County Metro bus stop. Lighting will be upgraded along the new parking zones and pedestrian pathways, while new wayfinding signage will guide foot and bicycle traffic through the reconfigured space. These improvements aim to create a safer, more accessible, and environmentally responsible entry corridor to the terminal, aligning with broader goals for sustainable transportation and ecosystem resilience. The project is managed by the Port of Seattle through its Waterfront Project Management division, with Mike Van Cleve as the primary point of contact and Terrence Moody serving as Project Manager.

Waterfront Project Management

POSTED

about 8 hours ago

DEADLINE

Emerson St. Sinkhole RepairThe project involves repairing a sinkhole caused by a disconnected segment of stormwater drain line that once fed into the main King County line beneath Emerson Street. Work will require extensive excavation to remove the damaged portion of the pipe, install a new replacement line, and construct a secure connection point back to the main drainage system. The scope also includes backfilling the excavated area and repaving the affected asphalt surface to restore the roadway. Given the location on a busy arterial road, the contract demands comprehensive traffic control measures that will impact multiple lanes, necessitating careful coordination to maintain safety and minimize disruption to commuters and local traffic flow. The project is managed by the Port of Seattle through its Waterfront Project Management division, with primary contact provided by Marilynn Montenegro and project oversight from Brandon Klett.

Waterfront Project Management

POSTED

about 8 hours ago

DEADLINE

Asphalt Paving & Striping Portwide Unit Price 2026The contract covers a broad range of asphalt paving, striping, and related infrastructure work to be performed across multiple locations within the Seattle-Tacoma International Airport, maritime properties, and surrounding areas. Scope of work includes new asphalt paving and patching, overlays with fabric, crack sealing, seal coating, profile grinding, hauling and disposal of grinding spoils, removal of existing markings, surface preparation for new striping, various paint striping, saw cutting and coring of non-hazardous concrete and asphalt, installation of concrete wheel stops, repair and replacement of curbs, lifting and leveling of concrete sidewalks, and upgrades to road water drainage systems, which may require permitting. All work is to be executed under a unit price structure for the year 2026, with performance spanning numerous Port-wide sites. The contract is issued by the Port of Seattle through its Port Construction Services division, with Heather Bowden designated as the primary point of contact and Lesley Miles serving as the project manager. Solicitations are managed through the Port’s online portal, and while no solicitation number has been assigned yet, the forecast was posted on July 21, 2026, indicating preparatory planning for future bidding. The NAICS code 237310 confirms the work falls under highway, street, and bridge construction. No set-aside provisions are specified, and performance locations are not further detailed beyond the general geographic scope of the Port’s facilities and adjacent areas.

Port Construction Services

POSTED

about 8 hours ago

DEADLINE

Asphalt Repairs Bldg 905, 916, PP201, LCH4930, AS211, & AS214Only civil and paving MACC contractors listed on the General Requirements cover page are eligible to submit proposals for this project, which focuses on asphalt repairs at buildings 905, 916, PP201, LCH4930, AS211, and AS214 located at Camp Lejeune, North Carolina. The solicitation, numbered N4008526R9071, was posted on July 20, 2026, with proposals due by August 20, 2026, and is structured as a total small business set-aside under FAR 19.5, with the NAICS code 237310. Offers must be submitted electronically through the eCMS system, and final deliverables including record drawings and complete submittal packages must be provided on CD/DVD in a bound volume with a table of contents. All work requires a comprehensive Quality Control plan detailing definable work features, personnel qualifications, testing procedures, and documentation formats, all subject to Contracting Officer approval prior to commencement. The contractor must comply with FAR 52.236-9 and FAR 52.236-21, adhere to ASTM standards for materials testing including C 1077, D 3666, and D 3740, and use only NVLAP, AASHTO, or A2LA accredited laboratories. Personnel requirements are stringent: the superintendent must have a minimum of 10 years of experience including five in similar projects, the QC manager must be fluent in English, and a certified Site Safety and Health Officer must be on-site at all times, supported by trained first aid and CPR personnel. Key safety mandates include EM 385-1-1 compliance, identification of competent persons for high-risk tasks, and certification of industrial hygienists and occupational medicine physicians. Hazardous waste management must follow 40 CFR 261, 262, and 263, with 55-gallon drums requiring secondary containment and proper labeling via DD Form 1354. Invoices must be submitted electronically through WAWF with no attachment exceeding two megabytes. The use of eCMS is restricted to unclassified and CUI-marked information, with strict prohibition of PII. All equipment deliveries must be made to designated on-base locations near Verona Loop Road, and any non-compliance may

Navfacsyscom Mid-Atlantic

POSTED

about 17 hours ago

DEADLINE

Monongahela NF FR78 Dogway Bridge Replacement

Csa East 13 Usda-Fs

POSTED

about 17 hours ago

DEADLINE

in about 1 month

ITB No. 26-2963-5JL - Three Chopt Road ImprovementsThe contract involves the construction of a realigned section of Three Chopt Road spanning 2.174 miles, encompassing significant roadway improvements including widening, reconstruction, and new road construction with associated infrastructure such as curb and gutter, sidewalks, enclosed and open storm drainage systems, box culverts, and updates to water and sewer utilities. The project requires comprehensive earthwork and pavement installation to meet current standards while integrating stormwater management and pedestrian accessibility features throughout the corridor. All work is to be performed within the County of Henrico, Virginia, with strict adherence to specified engineering and construction protocols. The solicitation, identified as IFB-123202 under title ITB No. 26-2963-5JL, was posted on June 26, 2026, with a response deadline of August 6, 2026. Issued by the Henrico County Government in Virginia, the procurement is open to qualified contractors without a specified set-aside classification. Proposals must be submitted through the designated vendor portal, and inquiries should be directed to Jianchong Luo at the provided email and phone number. Performance of the work is confined to the designated corridor in Henrico County, and compliance with all contractual specifications, timelines, and safety standards is mandatory.

Henrico County Government

POSTED

about 24 hours ago

DEADLINE

Roadway Surface Milling ServicesThe contract calls for full-depth asphalt milling on a 0.01-mile segment of Interstate Highway IH0002 located in Hidalgo County, Texas, encompassing all necessary activities from mobilization through cold planing, debris removal, and surface preparation to support subsequent resurfacing. The work must be executed in compliance with industry standards and transportation department specifications to ensure road integrity and safety. All equipment, labor, and logistics required to complete the milling process and clear the site are included within the scope of the subcontract. The solicitation is issued by the Texas Department of Transportation under NAICS code 237310 for roadway construction services, with a response deadline of August 11, 2026, at 3:00 PM. The contract is classified as a subcontract and is openly available through the Texas SmartBuy portal, indicating it is open to qualified contractors seeking to participate in state infrastructure projects. No set-aside provisions or specific eligibility requirements are indicated, allowing any eligible subcontractor to submit a bid. The project is positioned as a targeted maintenance activity critical to maintaining the condition of a high-traffic interstate corridor.

Texas Department of Transportation

POSTED

DEADLINE

LOCAL LET MAINTENANCE CONTRACT, HIDALGO CO, MILLINGThe Texas Department of Transportation is soliciting bids for a milling maintenance contract on Interstate Highway IH0002 in Hidalgo County, Texas, with an estimated contract value of $624,994. The work involves milling a 0.01-mile stretch of roadway and must be completed within 69 working days following contract award. Bids must be submitted electronically through the Electronic State Business Daily (ESBD) and Electronic Bidding System by August 11, 2026, at 3:00 PM CT, with proposals required to be delivered to the Pharr District office at 600 W US 83 Expwy, Pharr, TX. A bid guaranty of $12,000 is required, and no small business participation goal has been set. The project is classified under NAICS code 237310 for highway, street, and bridge construction, and there is no set-aside designation. The sole point of contact for bidding inquiries is Jesus Noriega at the Pharr District, reachable at 956-702-6264. Technical specifications, inspection criteria, packaging requirements, and evaluation factors are not detailed in the available solicitation materials, with bidders directed to the official ESBD platform for full contract terms. The contract type is described as a local let maintenance contract, and no line-item financial breakdown, clause details, or government point of contact for contract administration are provided beyond the bid submission address. All essential provisions, including delivery timelines, acceptance standards, and invoicing procedures, are expected to be contained in the complete solicitation documents accessible through the electronic bidding portal.

Texas Department of Transportation

POSTED

DEADLINE

Construction of a Surfacing StructureThe Rural Municipality of Montrose No. 315 is soliciting bids for the construction of a surfacing structure along Range Road 3065, covering a 3.22-kilometer stretch from 6.47 kilometers north of its intersection with Township Road No. 330 to 9.69 kilometers north. The scope of work involves loading and hauling traffic gravel, surface mixing and compaction, installing a contractor-supplied granular base course, applying a prime coat, and all associated activities necessary to complete the surfacing project. Tenders must be submitted in sealed envelopes labeled “RM315-2026-02 Tender” and delivered to Prairie Road Solutions Inc. in Saskatoon, or sent electronically via email to the designated address with the exact subject line specified. Electronic submissions are accepted but carry no guarantee of confidentiality, and the bidder assumes all risks related to digital transmission. An email confirmation will be sent upon receipt, and bidders are responsible for verifying delivery if no confirmation is received before the deadline. The closing time for submissions is 2:00 p.m. C.S.T. on Thursday, July 30, 2026, and there will be no public opening of tenders. Award notifications will be sent directly to bidders, and final results will be disclosed only after contract award. All submission requirements and detailed specifications are outlined in the attached tender documents.

Rural Municipality of Montrose No. 315

POSTED

DEADLINE

Asphalt Paving and Surface TreatmentThe contract involves grading, base preparation, and asphalt paving services for roads, parking lots, and accessways under the California Department of Transportation, specifically for work to be performed in San Luis Obispo. It is classified as a subcontract with a NAICS code of 237310, indicating it falls under highway and street construction. The solicitation was posted on July 20, 2026, with a mandatory response deadline of August 6, 2026, requiring interested parties to submit proposals before the specified time. Work must comply with Caltrans standards and specifications, and performance is limited to the designated location without provisions for alternative sites. There is no set-aside designation identified, and the contracting office has not provided a specific point of contact for inquiries, though details can be accessed via the provided online portal.

California Department of Transportation

POSTED

DEADLINE

Drainage System Cleaning and Culvert MaintenanceThe contract for Drainage System Cleaning and Culvert Maintenance requires the performance of inspection, cleaning, and minor repair services on bridge drainage systems and culverts across Texas to prevent water accumulation and prevent scour damage that could compromise structural integrity. The work involves regular maintenance activities to ensure proper water flow, remove debris and sediment buildup, and address minor structural issues before they escalate, with the goal of extending the lifespan of transportation infrastructure and maintaining public safety. All tasks must be carried out in accordance with state standards and best practices for hydraulic system maintenance. This is a subcontract awarded by the Texas Department of Transportation under NAICS code 237310, which pertains to Highway, Street, and Bridge Construction. The solicitation was posted on July 20, 2026, with a mandatory response deadline of August 11, 2026. Work is expected to occur throughout the state, and although the specific locations are not detailed, performance will be tied to the Texas transportation network. Contractors must be prepared to operate in varied environmental conditions and adhere to all applicable safety and regulatory protocols. Further details and submission requirements can be accessed via the provided Texas SmartBuy portal link.

Texas Department of Transportation

POSTED

DEADLINE