This Solicitation opportunity from Department Of Defense was posted on June 8, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Small Marine Craft Maintenance and Repair

Closed

W912EP26QA010Federal

Submission Closed06/12/2026, 01:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 336611

New

SLED

F&W, 2018 Munson Packman Boat Repower project

Solicitation # 2018 Munson Packman Boat Repower

The Confederated Tribes of the Colville Reservation Fish and Wildlife Department is seeking a factory-certified marine contractor to perform a complete propulsion repower and helm system integration for a 30 foot Munson Packman landing craft. The project involves a six-phase process including the decommissioning and removal of two existing Honda BF250A outboard engines, a structural assessment of the transom, and the installation of two new Honda BF250D Drive-by-Wire outboards. Key technical requirements include the installation of new-generation Honda iST electronic control heads at primary and secondary helm stations, integration with the existing NMEA 2000 backbone and SeaStar PA1315-2 Power Assist Steering system, and a comprehensive fuel system upgrade using USCG Type A1-15 lines. The project concludes with static diagnostics and a minimum two-hour sea trial to validate performance and safety protocols. The Tribe will deliver the vessel to the contractor's facility, which must provide a secure, fenced yard or indoor shop. Proposals are due by November 13, 2026, and must be submitted in PDF format. Evaluation is based on a 100-point scale with significant preference given to Colville Business Enterprises and other Indian-owned businesses. Award criteria prioritize reliability and effectiveness over the lowest cost. Selected contractors must provide proof of Honda Marine Authorized Dealer status, maintain appropriate liability insurance, and agree to either a 25 percent retainage or a performance bond, with a bond being mandatory for contracts exceeding 100,000 dollars. All payments are subject to the Tribes appropriation process and availability of funds.

Confederated Tribes of the Colville Reservation

POSTED

DEADLINE

PANEL, VEHICULAR OPERAT

Solicitation # SPE7M4-27-T-1904

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Solicitation # SPE7M4-27-T-1931

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Solicitation # SPE7M4-27-T-1892

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

WINDSHIELD WIPER ASSEM

Solicitation # SPE7M4-27-T-1887

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Solicitation # SPE4A6-27-T-4939

Solicitation SPE4A6-27-T-4939 is a total small business set-aside issued by the DLA Weapons Support ASC Commodities Division for the procurement of three rudder angle indicators, identified by NSN 6320007316134. The requirement is for a critical application item, specifically referencing Dynalec Corporation part number 4N7N. Delivery is required by December 18, 2027, with a need ship date of April 13, 2027, shipped FOB Origin to DLA Distribution San Joaquin in Tracy, California. The contract mandates strict adherence to quality and technical standards, including CMMC Level 2 Self-Assessment and compliance with SAE AS9003 or ISO 9001. Inspection and acceptance will occur at the origin, utilizing zero-based sampling plans per MIL-STD-1916 or ASQ H1331. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, with a strict prohibition on the use of mercury or mercury compounds in preservation and packaging. Offerors not listed as acceptable sources must obtain source approval from the design control activity. Payment and invoicing are to be processed electronically through the Wide Area Workflow system.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Solicitation # SPE7MC-27-T-0664

Solicitation SPE7MC-27-T-0664 is a total small business set-aside issued by the DLA Distribution San Joaquin for the procurement of two ball valves, identified by NSN 4820015426625 and Hunt Valve Company part number D2355(ASSY2). This critical application item requires Item Unique Identification in accordance with MIL-STD-130 and DFARS 252.211-7003. The required delivery date is April 9, 2027, with a need ship date of April 6, 2027. Delivery is FOB Origin under the First Destination Transportation program, with the final destination being the DLA Distribution San Joaquin facility in Tracy, California. Inspection and acceptance will occur at the destination. The contract mandates strict adherence to DLA packaging and marking standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. All payment requests and receiving reports must be processed electronically through the Wide Area Workflow system. The procurement is subject to various federal regulations, including the Buy American Act, the Berry Amendment, and specific DFARS clauses regarding cybersecurity and the prohibition of certain telecommunications equipment. All quotes must be submitted via the DLA Internet Bid Board System, and the use of additive manufacturing processes for the supplied parts is prohibited unless specifically authorized.

POSTED

DEADLINE

Hull and Structural Steel RepairThis subcontract for Hull and Structural Steel Repair involves providing specialized steel fabrication and welding services for prime contractors supporting Puget Sound Naval Shipyard IMF projects. The scope of work includes the removal of chevron retaining hardware, the modification of rubber fender retention according to drawing SK10901, and the repair of rubber fender straps located at the bow and stern. All welding activities must strictly adhere to ANSI/AWS D1.1/D1.2 standards to ensure the structural integrity of the delivered hull components. Managed under the Department of Defense with a NAICS code of 336611, the project focuses on the delivery of modified and repaired hull structures. The solicitation was posted on October 27, 2026, with a response deadline set for November 3, 2026.

Puget Sound Naval Shipyard IMF

POSTED

DEADLINE

USNS SALVOR (T-ARS 52) VOYAGE REPAIR AVAILABILITY (VRA)

Solicitation # N6264927QL003

Navsup Flt Logistics Ctr Yokosuka

POSTED

DEADLINE

TSV4 NARR MESSING AND MODERNIZATION

Solicitation # N0018927QL008

NAVSUP FLT LOG CTR Norfolk is soliciting a firm-fixed-price contract for the development of a drawing package and Bill of Materials (BOM) to support habitability upgrades for the TSV4 Narragansett. The scope of work focuses on the vessel's messing, berthing, stateroom, and sanitary spaces at Joint Expeditionary Base Little Creek-Fort Story in Virginia Beach, Virginia. This effort is strictly limited to assessment and documentation; it specifically excludes any procurement, fabrication, removal, or installation of shipboard components. The project is a total set-aside for small businesses, including service-disabled veteran-owned small businesses, under NAICS code 336611. Key deliverables include a draft drawing package and BOM due 40 calendar days after award, with the final delivery of two electronic files and two full-size paper copies in NAVSEA format due within 61 calendar days. Contractors must adhere to several technical standards, including MIL-STD-2003 for electric plants, MIL-STD-777 for piping, and General Specifications for Overhaul of Surface Ships. A mandatory ship check at Colonna's Shipyard in Norfolk is required for eligibility, and failure to attend will result in disqualification. Award will be based on the best value, evaluating the mandatory ship check on a pass/fail basis and the technical approach on an acceptable/unacceptable basis, with the final selection going to the lowest total evaluated price.

Navsup Flt Logistics Ctr Norfolk

POSTED

DEADLINE

BIG BLUE 3 MAC - N64498-26-Q-5284

Solicitation # N6449826Q5284

The BIG BLUE 3 MAC solicitation, identified by number N6449826Q5284, is issued by the Department of Defense through the Naval Surface Warfare Center Philadelphia Division. This procurement falls under NAICS code 336611, indicating a focus on the manufacture of boat and marine vessel engines. The opportunity was posted on October 27, 2026, with a response deadline set for November 2, 2026. The contracting office is located in Philadelphia, Pennsylvania. Interested parties may coordinate with the primary point of contact, Anthony Ricciardi, for further inquiries. Detailed specifications and submission requirements can be accessed via the provided government portals.

Nswc Philadelphia Division

POSTED

DEADLINE

63--SWITCHBOARD,ALARM,SHIP

Solicitation # SPE4A627T7280

DLA Aviation

POSTED

about 20 hours ago

DEADLINE

in 7 days

AI Contract Overview

Solicitation W912EP26QA010 is a Request for Quote for Small Marine Craft Maintenance and Repair issued by the Department of Defense, specifically the W074 Endist Jacksonville. This requirement is a Total Small Business Set-Aside under NAICS 336611, with performance located in Jacksonville, Florida. The contract is structured as a Firm Fixed Price BPA Call Order with a period of performance of 365 calendar days, specifically spanning from June 15, 2026, to June 14, 2027. The scope of work involves comprehensive electrical and mechanical installation, diagnostics, and repairs for multiple vessels, including specific tasks such as haul outs, bilge cleaning, HVAC maintenance, and hull and aluminum repairs. All work must adhere to USCG standards and utilize marine-grade alloys. The award will be based on the Lowest Priced Technically Acceptable (LPTA) quote, evaluated through Simplified Acquisition Procedures. To be considered, offerors must pass responsiveness, responsibility, and technical acceptability gates. Key deliverables include detailed repair recommendations, photographic documentation, and written Critical Inspection Reports for specific items witnessed by the Contracting Officer's Representative. The contract incorporates various FAR and DFARS clauses covering cybersecurity, government property management, and service contract labor standards. Final acceptance of the work is contingent upon the successful completion of sea trials and government approval.

General Info

DoD small business contract for marine craft maintenance and repair in Jacksonville, Florida.

Agency

Department Of Defense → W074 Endist Jacksnvlle

NAICS

336611 - Ship Building and Repairing

Place of Performance

Jacksonville, FL, USA

Set-Aside

SBA

Documents

Solicitation W912EP26QA010 for Small Craft Maintenance and Repairs

rfq

High

USACE Small Craft Maintenance and Repairs Scope of Work FY-2026

sow

High

USACE Small Craft Maintenance and Repairs Scope of Work FY-2026

sow

High

Price Sheet FY26 Small Craft Call

price-sheet

Low

SB-34 Vessel Work Items Checklist FY26

checklist

Low

SB-Amelia Aluminum Hull Catamaran Work Item Checklist FY26

checklist

Low

SB-El Morro Aluminum Hull Catamaran Work Item Checklist FY26

checklist

Low

USACE Jacksonville District SB-48 FY26 Work Item Checklist

checklist

Low

US Army Corps of Engineers Jacksonville District SB54 Checklist FY26

checklist

Low

US Army Corps of Engineers Vessel Work Items Checklist FY26

checklist

Low

AI Contract Breakdown

Uniform Contract Format

Timeline

2 updates

PhaseClosed

PostedMay 26

Solicitation

Notice updatedJun 2

The notice description changed.

Notice updatedJun 8

Response deadline changed from Jun 9, 2026 to Jun 12, 2026. The notice description changed.

Response DeadlineJun 12

Deadline has passed

Submission Closed

06/12/2026, 01:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → W074 Endist Jacksnvlle

Contacts2 people available

OfficeJACKSONVILLE, FL, 32207-0019, USA

Organization / AgencyDepartment Of Defense → W074 Endist Jacksnvlle

Office AddressJACKSONVILLE, FL, 32207-0019, USA

Contacts

Kelly Koger

contact@example.gov

Dustin L. Furrey

contact@example.gov

Full Description

This requirement is for Small Marine Craft Maintenance and Repair. Refer to the attached Scope of Work.

2 June 2026 - This amendment is issued to attach the checklists for each vessel. Refer to attachments.

8 June 2026 - This amendment is issued to update the Scope of Work (SOW) and extend the RFQ due date.

More opportunities from Department Of Defense → W074 Endist Jacksnvlle

Same awarding agency

NAICS: 541620

New

Federal

Notice of Intent to solicit a single source – Fish and Macroinvertebrate (Nekton) Monitoring (St. Johns River)

Solicitation # W912EP-27-Q-1CTH

Environmental Consulting Services

POSTED

DEADLINE

Marine Civil Works (Specialty Trades)This subcontract opportunity, titled Marine Civil Works (Specialty Trades), involves providing essential harbor infrastructure supplies and installation services for prime contractors working on USACE Jacksonville District harbor deepening projects. The scope of work focuses on critical marine improvements, including seawall repair, riprap installation, armor stone placement, and the upgrading of fender systems to support enhanced harbor operations. Managed by the Department of Defense under the W074 Endist Jacksnvlle agency, the project will be performed in Tampa. Interested parties should note that the solicitation was posted on October 23, 2026, with a response deadline of November 18, 2026. The work falls under NAICS code 237990, specializing in marine civil engineering and infrastructure delivery.

Other Heavy and Civil Engineering Construction

POSTED

DEADLINE

Environmental Monitoring & ComplianceThis subcontract opportunity, titled Environmental Monitoring and Compliance, involves providing specialized environmental testing and monitoring services for prime contractors working on USACE Jacksonville District harbor projects. The primary objective is to ensure that dredging activities remain in full compliance with established permits. Key responsibilities include conducting water quality turbidity monitoring and performing wildlife monitoring specifically for manatees and sea turtles, with the final delivery of comprehensive environmental compliance reports and monitoring data. The project is managed under the Department of Defense through the W074 Endist Jacksnvlle agency and will be performed in Tampa. Classified under NAICS code 541620, the solicitation was posted on October 23, 2026, with a response deadline set for November 18, 2026.

Environmental Consulting Services

POSTED

DEADLINE

Hydrographic & Bathymetric SurveyingThis subcontract for Hydrographic and Bathymetric Surveying supports prime contractors on USACE Jacksonville District harbor projects located in Tampa. The scope of work involves performing critical pre- and post-dredge surveys to map the harbor floor and ensure all depth requirements are met. Technical execution requires the use of multibeam sonar mapping, depth sounding, and geospatial data analysis to produce bathymetric maps and depth verification reports that adhere to USACE survey standards. The opportunity is categorized under NAICS code 541370 and is associated with the Department of Defense. Interested parties should note the response deadline of November 18, 2026, for this specialized maritime surveying project.

Surveying and Mapping (except Geophysical) Services

POSTED

DEADLINE

Dredged Material Management & DisposalThis subcontract opportunity, titled Dredged Material Management and Disposal, involves supporting prime contractors on USACE Jacksonville District harbor projects located in Tampa. The selected provider will be responsible for transporting and placing dredged materials at approved open water or upland disposal sites. Key operational requirements include barge hauling, the installation of slurry transport pipelines, the construction of containment areas, and the overall management of material placement. The contractor must ensure all disposal activities are fully documented and conducted at approved sites. This project falls under NAICS code 484220 and is associated with the Department of Defense. Interested parties should note the response deadline of November 18, 2026.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Marine Dredging ServicesThis subcontract for Marine Dredging Services supports the USACE Jacksonville District harbor deepening projects in Tampa. The selected contractor will work under prime contractors to perform the removal of sediment and rock from the harbor floor using both hydraulic and mechanical dredging techniques. The primary objective is to increase the depth of navigation channels to meet specific project requirements. The scope of work includes the mobilization of necessary dredging equipment and the comprehensive management of sediment transport. The final deliverable is a deepened navigation channel that adheres strictly to the project depth specifications. This opportunity is categorized under NAICS code 237990 and is associated with the Department of Defense.

Other Heavy and Civil Engineering Construction

POSTED

DEADLINE

Tampa Harbor Improvements Industry Day

Solicitation # W912EP27Z1CUA

The U.S. Army Corps of Engineers, Jacksonville District, has issued a special notice for an Industry Day event scheduled for November 18, 2026, regarding the Tampa Harbor Improvements project. This notice is for preliminary planning purposes and is not a solicitation for proposals. The event aims to gauge the capabilities and interest of the construction community, including small businesses, for a requirement slated for a fiscal year 2028 award. The overall project is expected to span six contracts over an eight to ten-year period, with a construction magnitude estimated between 100 million and 500 million dollars under NAICS code 237990. The specific focus of this Industry Day is Contract 1, which involves construction dredging to deepen and widen various sections of the Tampa Harbor federal navigation channel. Key deliverables include deepening Cut-C (HB), Port Sutton Channel, Port Sutton Turning Basin, East Bay Channel, and Cut-D (HB) to 49 feet MLLW, the Port Sutton Terminal Channel to 44 feet MLLW, and East Bay Channel Extensions 1 and 2 to 41 feet MLLW. The scope includes widening the Port Sutton Channel, Port Sutton Turning Basin, and East Bay Channel, with an estimated dredging volume of 4.4 million cubic yards. All work will incorporate one foot of allowable overdepth, and dredged materials will be disposed of in the East Bay Placement Area, DMMA 2-D, and DMMA 3-D. Interested parties must be registered in the System for Award Management to be eligible for future awards.

Other Heavy and Civil Engineering Construction

POSTED

DEADLINE

PASS-A-GRILLE-PASS, MAINTENANCE DREDGING, PINELLAS COUNTY, FLORIDA

Solicitation # GROUP1-27-R-J001

Solicitation GROUP1-27-R-J001 is a total small business set-aside for maintenance dredging at Pass-a-Grille Pass in Pinellas County, Florida, issued by the U.S. Army Corps of Engineers, Jacksonville District. This firm fixed price task order is limited to contractors previously awarded under solicitation W912EP25R0010. The scope of work involves excavating material from the pass and transporting it to the Pass-a-Grille Beach Placement Area located north of the channel. Hopper dredging is strictly prohibited. Incidental requirements include environmental and water quality monitoring, beach fill quality control, tilling, vibration monitoring, and Munitions and Explosives of Concern construction support. The project has a price target range between $5,000,000 and $10,000,000, with a performance period of 120 calendar days following the Notice to Proceed, and work must commence within 60 calendar days of that notice. The government will utilize the Lowest Price Technically Acceptable process for award, evaluating offerors based on the technical acceptability and availability of their identified dredge and their past performance under the associated MATOC. Proposals must be submitted in PDF format via the PIEE Solicitation Module by 2:00 PM EST on November 20, 2026. Key compliance requirements include adherence to the Davis-Bacon Act, the provision of performance and payment bonds within 10 days of award, and the submission of qualified bird monitor credentials. Technical specifications require beach fill to be clean sand free of debris or toxic materials, with strict monitoring at both the borrow and placement areas to ensure quality standards are met.

Other Heavy and Civil Engineering Construction

POSTED

DEADLINE

Vibration Control and MonitoringThis small business set-aside subcontract, issued by the Department of Defense under the US Army Corps of Engineers District Jacksonville, focuses on vibration control and monitoring for dredging projects. The selected contractor will be responsible for monitoring and controlling vibrations to protect nearby structures from damage, utilizing specialized equipment such as seismographs and vibration monitoring sensors. Key requirements include providing engineering certification for all vibration analysis and delivering detailed monitoring logs and compliance reports. The opportunity is categorized under NAICS code 541330, with a response deadline set for November 20, 2026.

POSTED

DEADLINE

Beach Fill Quality Control and TillingThis subcontract opportunity, titled Beach Fill Quality Control and Tilling, is issued by the Department of Defense under the US Army Corps of Engineers District Jacksonville. The project involves providing specialized quality control and beach tilling services for prime contractors on beach placement projects. Key responsibilities include executing material screening, beach fill quality control, and the use of tilling equipment to restore and stabilize placement areas. The selected contractor must hold the necessary quality control certifications and is responsible for delivering a tilled beach surface along with detailed quality control reports. The contract is designated as a total Small Business Set Aside under NAICS code 238990. It was posted on October 5, 2026, with a response deadline of November 20, 2026. This engagement focuses on ensuring the structural integrity and quality of beach restoration efforts through rigorous screening and stabilization processes.

All Other Specialty Trade Contractors

POSTED

DEADLINE

Environmental and Water Quality Monitoring ServicesThis subcontract opportunity is for Environmental and Water Quality Monitoring Services supporting prime contractors on US Army Corps of Engineers dredging projects under the Department of Defense. The selected provider will be responsible for monitoring environmental conditions and water quality through the use of sensors, turbidity meters, and sampling equipment to ensure full compliance during dredging and placement activities. Key deliverables include the submission of detailed water quality and environmental monitoring reports, and the contractor must possess the necessary environmental consulting licenses to perform the work. This is a total Small Business Set Aside opportunity categorized under NAICS code 541620. The solicitation was posted on October 5, 2026, with a response deadline of November 20, 2026. The project is associated with the W074 Endist Jacksnvlle office.

Environmental Consulting Services

POSTED

DEADLINE

Munitions Explosive Components (MEC) SupportThis subcontract opportunity, issued by the Department of Defense under the W074 Endist Jacksonville, provides specialized Munitions and Explosive Components support for prime contractors working on US Army Corps of Engineers dredging projects. The scope of work involves the identification, handling, and management of MEC using professional detection equipment and strict safety protocols. The selected provider must possess specialized MEC/UXO certifications to deliver essential safety support and detailed clearance reports. This is a total Small Business Set Aside opportunity under NAICS code 325920. The solicitation was posted on October 5, 2026, with a response deadline of November 20, 2026.

Explosives Manufacturing

POSTED

23 days ago

DEADLINE

in 23 days

View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

NAICS: 336611

Closed

Federal

3577 NASA Pegasus Drydock

Solicitation # W912BU26BA016

W2SD Endist Philadelphia

POSTED

CLOSED

Solicitation # 70Z08027PBPLCOHO

Sflc Procurement Branch 1(00080)

POSTED

CLOSED

Dock-Side (DS): CGC RELIANCE DS

Solicitation # 70Z08026SCGCRELIANCEAA

Sflc Procurement Branch 1(00080)

POSTED

CLOSED

Solicitation # SPMYM426Q3461

DLA Maritime - Pearl Harbor

POSTED

CLOSED

Dock-side (DS): USCGC WAESCHE FY27 Repair

Solicitation # DOCKSIDE-REPAIRS-CGC-WAESCHE

Sflc Procurement Branch 2(00085)

POSTED

CLOSED

Solicitation # SPMYM326Q4055

DLA Maritime - Portsmouth

POSTED

CLOSED

6A1 Corrective Maintenance for Puget Sound Naval Shipyard (PSNS) Barge YR-85 and YR-95

Solicitation # N6264926RA041

Navsup Flt Logistics Ctr Yokosuka

POSTED

CLOSED

REPAIR - ROLLS-ROYCE COOLER, FLUID UNDUSTRIAL

Solicitation # 2126406B27DSDZ003

Sflc Procurement Branch 3(00040)

POSTED

CLOSED

Solicitation # N4523A60977033

Department Of Defense

POSTED

CLOSED

52000RFQ260025632-CGC Bear Water Deionization System Renewal

Solicitation # 52000RFQ260025632

Sflc Procurement Branch 1(00080)

POSTED

CLOSED

LA Class Submarine Tank Pumping

Solicitation # N32253-26-Q-0053

Pearl Harbor Naval Shipyard IMF

POSTED

CLOSED

Marine Propulsion Hub Manufacturing

Navsup Weapon Systems Support Mech

POSTED

5 months ago

DEADLINE

N/A

View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS