Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

This Sources Sought opportunity from Department Of Homeland Security was posted on October 4, 2012. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

SOURCES SOUGHT NOTICE: DRY DOCK REPAIRS USCGC KEY BISCAYNE

Closed
USCGC1339FY13DDFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 336611
New
Federal
Voyage Repair (VR)
Solicitation # N6817127QN006
Solicitation N6817127QN006 is a Request for Quote issued by the Navsup Flc Sigonella Naples Office for firm fixed price non-commercial voyage repair services for the USS RAFAEL PERALTA (DDG 115). The work is to be performed in Mombasa, Kenya, with a period of performance from 12 November 2026 to 18 November 2026. The scope of work includes hull maintenance such as high-pressure fresh water washing, rust and corrosion removal, replacement of lagging and insulation, cleaning and inspection of air conditioning and refrigeration plant condensers, furniture upholstery replacement, and the provision of rigging and scaffolding services. All work must adhere to NAVSEA Standard Items and specification package NAPL-009-27. Award will be made to the lowest priced technically acceptable offeror, with technical capability evaluated on an acceptable or unacceptable basis. Offerors must submit a completed J-1 price breakdown in US dollars, a draft Test and Inspection Plan, and a signed Use and Non-Disclosure Agreement to access restricted technical data. Quality assurance requirements include providing a quality management system supporting documents and certifications for welding and coatings. Contract administration requires electronic invoicing via Wide Area WorkFlow, and the contractor must comply with specific overseas insurance requirements, including the Defense Base Act and war-hazard insurance.
Navsup Flc Sigonella Naples Office

POSTED

about 5 hours ago

DEADLINE

in 3 days
NAICS: 336611
New
Federal
Misty Barge Dry Dock Services
Solicitation # 1240BF27Q0002
Solicitation 1240BF27Q0002 is a total small business set-aside issued by the USDA-FS CSA Northwest 4 for dry dock services for the Misty Barge, currently located at Shelter Cove on Revillagigedo Island, Alaska. The scope of work includes hauling out the vessel, performing exterior hull sandblasting and painting, repairing the exterior deck and appurtenances, painting the interior hull, and cleaning bilge tanks. All painting must adhere to Preparation and Painting Specification 00300 and manufacturer recommendations, specifically utilizing PPG products. The period of performance extends from the date of award through April 1, 2027, with specific deliverables including a work schedule, coating products list, and interior bilge painting plan due shortly after the start date. Offers are due by November 6, 2026, following an extension granted by Amendment 0001. Proposals must be submitted via email as three separate attachments covering technical capability, past performance, and price. Award will be based on the most advantageous quote, with price serving as the primary evaluation factor. Technical evaluations will focus on the provided draft work schedule and proposed haul-out dates, while past performance will be assessed based on recency and relevancy within the last three years. The contractor is responsible for implementing a Quality Control Plan managed by a designated Quality Control Representative, while the government will maintain Quality Assurance through performance requirements measures.
Csa Northwest 4 Usda-Fs

POSTED

1 day ago

DEADLINE

in 7 days
NAICS: 336611
New
Federal
USCGC DOLPHIN FUEL TANK CLEANING
Solicitation # 52000QR270000488
The U.S. Coast Guard Surface Force Logistics Center is soliciting quotations for the cleaning and inspection of two diesel fuel service tanks (3-9-1-F and 3-9-2-F), each with a 1,450-gallon capacity, aboard the USCGC Dolphin (WPB-87354) in Mobile, Alabama. This total small business set-aside is being processed as a firm-fixed price contract using simplified acquisition procedures under FAR Part 13 and FAR Subpart 12.6. The scope of work includes the removal and legal disposal of 1,400 gallons of contaminated diesel fuel, comprehensive interior cleaning of tank surfaces, atmospheric testing by a competent person, and detailed visual inspections of structural conditions and coating systems. The contractor is also responsible for maintaining a plug log, providing a chain of custody for waste, and implementing a Quality Control Program to ensure compliance with SFLC Standard Specifications 0000 and 0740. The period of performance is not to exceed five days, with a requested work window between November 15, 2026, and December 15, 2026. Key deliverables include the successful execution of initial and post-service operational tests on tank level indicators and vent check valves, witnessed by the Engineer Petty Officer. The government will provide new gaskets and stainless steel hardware for tank closure. Interested vendors must be registered in SAM.gov and submit a detailed cost breakdown, including unit and total pricing, by November 9, 2026, at 0900 A.M. EST. Award will be based on the best value to the government, considering price, specifications, quality, and past performance.
CG-SEA-C21

POSTED

1 day ago

DEADLINE

in 10 days

AI Contract Overview

Show more

The U.S. Coast Guard is issuing a Sources Sought Notice to conduct market research for dry-dock repairs on the USCGC KEY BISCAYNE (WPB-1339), a 110-foot C Class Patrol Boat. The government seeks to identify capable sources and determine if commercial items or practices are suitable for the project. The required work must be performed at the contractor's facility, which must be located within 576 nautical miles one way from the vessel's homeport in Key West, Florida. The extensive scope of work includes hull plating and structural repairs for aluminum and steel, tank cleaning and preservation, propulsion system overhauls, and the renewal of various valves, piping, and interior insulation. The anticipated period of performance is 66 calendar days, scheduled from April 17, 2013, to June 21, 2013. Interested companies under NAICS code 336611 are invited to submit their company information, business size certifications, and past performance evidence by October 12, 2012.

General Info

Market research for dry-dock repairs on USCGC KEY BISCAYNE near Key West, Florida.

NAICS

336611 - Ship Building and Repairing

Place of Performance

The contractor's facility, which must be within 576 nautical miles one way or 1152 nautical miles round trip from the cutter's , KEY WEST, FL, 33040, USA

Set-Aside

NONE

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed
Posted

Sources Sought

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Homeland Security → Sflc Procurement Branch 1(00080)
Contacts2 people available
OfficeNORFOLK, VA, 23510, USA
Office AddressNORFOLK, VA, 23510, USA
Contacts
Shavonda A. JamisonContract Specialist
Susan A. KreiderContracting Officer

Full Description

Show more
SOURCES SOUGHT NOTICE: DRY DOCK REPAIRS USCGC KEY BISCAYNE (WPB-1339) This is a SOURCES SOUGHT NOTICE / REQUEST FOR INFORMATION; not a pre-solicitation notice or solicitation for proposals/quotations. Pursuant to FAR Part 10 (Market Research), the purpose of this notice is to: (1) determine if sources capable of satisfying the agency's requirements exists, (2) determine if commercial items suitable to meet the agency's needs are available or could be modified to meet the agency's requirements, and (3) determine the commercial practices of company's engaged in providing the needed service or supply. Pursuant to FAR Part 6 and FAR Part 19, competition and set-aside decisions may be based on the results of this market research. This notice in no way obligates the Government to any further action. REQUIREMENT: This notice is issued by the U.S. Coast Guard, Surface Force Logistics Center, Norfolk, VA to identify sources capable of providing the following: DRY-DOCK REPAIRS SPECIFICATION (Subject to change at the discretion of the Government):Contractor shall provide all necessary facilities, materials, equipment, and personnel to perform DRY-DOCK repairs to the U.S. Coast Guard Cutter (USCGC) KEY BISCAYNE (WPB-1339), a 110 Foot "C CLASS" Patrol Boat. The vessel is home ported at 100 Trumbo Point Key West, FL 33040. All work will be performed at the contractor facility. This vessel is geographically restricted to 576 Nautical Miles one way, or 1152 Nautical Miles round trip from the cutter's homeport located at 100 Trumbo Point Key West, FL 33040. SCOPE OF WORK (Subject to change at the discretion of the Government):The scope of the acquisition is for the DRYDOCK repairs of the USCGC KEY BISCAYNE (WPB-1339). This work may include, but is not limited to the following items: Hull Plating, U/W Body, Inspect Hull Plating (U/W Body), Ultrasonic Testing Aluminum Hull and Structural Repairs - 1/4" Plate Aluminum Hull and Structural Repairs - 3/16" Plate Aluminum Hull and Structural Repairs - 5/16" Plate Hull and Structural Plating Repairs -Crack (Aluminum) Hull and Structural Plating Repairs - Crack (Steel) Hull and Structural Plating Repairs - Eroded Weld (Aluminum) Steel Hull and Structural Plating Repairs (5-Pound) Steel Hull and Structural Plating Repairs ( 7.0 Pound, 7.5-Pound or 7.65-Pound) Steel Hull and Structural Plating Repairs , Corrugated Plate (4.0-Pound) Hull and Structural Plating Repairs (6.0-Pound or 5.63-Pound) Tanks ( Fuel Service), Clean and Inspect Voids (Non-Accessible), Leak Test Tanks ( Fuel Stowage and Overflow), Clean and Inspect Voids (Non-Accessible), Preserve Internal Surfaces Tanks, Air Test Tanks (Potable Water), Clean and Inspect Tanks (Dirty Oil and Waste), Clean and Inspect Propulsion System , Alignment Check Propulsion Shafting, Remove, Inspect, and Reinstall Mechanical Shaft Seal Assemblies, Overhaul Propulsion Shafting Bearings (External), Renew Propulsion Shaft Stern Tube Bearings , Renew Propellers ; Remove, Inspect, and Reinstall Exhaust System , MDE , Inspect SW Heat Exchangers, Clean, Inspect and Hydro Fathometer Transducer, Renew Speed Doppler, Renew, Doppler Valve, Overhaul Sea Valves and Waster Pieces, Overhaul or Renew Sea Strainers - Duplex (All Sizes), Overhaul Steering Gear (General) , Overhaul Rudder Assembly, Remove, Inspect and Reinstall Fin Stabilizers (General), Overhaul Tanks , (Grey Water) Clean and Inspect Tanks, ( Sewage Holding ) Clean and Inspect Grey Water Piping , Clean and Flush Sewage Piping , Clean and Flush (D) Forward Peak Compartment, Preserve Forward Head, Preserve Tanks ( Sewage Holding ) , Preserve " Partial " (O) Tanks ( Aft Grey Water ) , Preserve " 100% " Tanks ( Aft Grey Water ) , Preserve"Partial" Tanks (Dirty Oil ), Preserve " 100% " Tanks (Dirty Oil ), Preserve " Partial" Tanks (Oily Water), Preserve "100%" Tanks (Oily Water), Preserve "Partial" Tanks (Potable Water), Preserve "100%" Tanks (Potable Water), Preserve "Partial" U/W Body, Preserve "100%" U/W Body, Preserve "Partial - Condition A " U/W Body, Preserve "Partial - Condition B" U/W Body, Preserve "Partial - Condition C " Cathodic Protection System (Bilge and Sea Chest), Renew Cathodic Protection System Inspect and Maintain Renew Floating Deck System in AFT Berthing Drydocking Temporary Services, Provide Data Service , Provide Sea Trial Performance, Provide Support Firemain Valves, Overhaul Or Renew Bilge and Ballast Valves, Overhaul or Renew Ship Service Diesel Generators Isolation Mounts, Install New Deck Covering (Interior), Renew Fin Stabilizers, Lower Bearing Housings, Renew Insulation, Aft Berthing, Renew Insulation, Overhead, CO's and XO's Stateroom, Renew Joiner Bulkhead Panels, CPO Passageway, Renew Joiner Bulkhead Panels, Passageway and Galley, Renew Piping, Potable Water Brominator, Renew Racks and Lockers, Renew Stern Tubes, Renew Structural Closures, Renew Superstructure, F/O Transfer Station, Repairs Ventilation Ducting, CO and XO Staterooms, EM Locker, Renew Sewage Holding Tank Renew Vent Pipe Appendages (U/W), Leak Test Appendages (U/W) - Internal, Preserve Decks - Exterior, Preserve ("Non-Skid Broadcast Grit" System) All welding and brazing shall be accomplished by trained welders who have been certified by the applicable regulatory code performance qualification procedures. Anticipated Period of Performance(Subject to change at the discretion of the Government): The period of performance is anticipated to be for sixty-six (66) calendar days with a start date of April 17, 2013 and end date of June 21, 2013. Anticipated NAICS Code/Size Standard: The applicable NAICS Code is 336611, Ship Building and Repairing and the size standard is 1,000 employees. Submission of Information:Companies having capabilities necessary to meet or exceed the stated requirements are invited to provide information to contribute to this market survey/sources sought notice including commercial market information and company information. Companies may respond to this Sources Sought Notice via e-mail to contact@example.gov or via fax to +1 (555) 000-0000 (Attn: SHAVONDA JAMISON/C&P1-PBPL) no later than FRIDAY, OCTOBER 12, 2012 12:00PM, Eastern Time with the following information/documentation: 1. Name of Company, Address and DUNS Number. 2. Point of Contact and Phone Number. 3. Business Size applicable to the NAICS Code: Please state all that apply to your company. ____ a. 8(a) Small Business Concern; ____ b. HubZone Small Business Concern; ____ c. Service-Disabled Veteran Owned Small Business Concern (SDVOSBC); ____ d. Veteran Owned Small Business Concern (VOSBC); ____ e. ED Woman Owned Small Business Concern (EDWOSB); ____ f. Woman Owned Small Business Concern (WOSBC); ____ g. Small Business Concern; ____ h. Large Business Concern 4. Documentation Verifying Small Business Size: a. If claiming 8(a) status, provide a copy of your 8(a) Certificate from SBA. b. If claiming HuBZone status, provide a copy of your HuBZone Certificate from SBA. c. If claiming SDVOSBC status, provide documentation that shows the Service Disable Veteran (SDV) unconditionally owns 51 % of the business, controls the management and daily operations, and holds the highest officer position in the company. Documentation should also be provided to show that the SDV has a service-connected disability that has been determined by the Department of Defense or Department of Veteran Affairs. Finally, provide documentation that shows the business is small under the NAICS code 336611. d. If claiming VOSBC status, provide documentation that shows the Veteran unconditionally owns 51% of the business, controls the management and daily operation, make long-term decisions for the business, and holds the highest officer position in the company that works at the business fulltime during normal working hours. The documentation should also show the business is small under the NAICS code 336611. e. If claiming EDWOSB status, provide documentation that shows the company is at least 51% owned by one or more women who are "economically disadvantaged", and primarily managed by an economically disadvantaged woman that make long-term decisions for the business, hold the highest officer position in the business and work at the business full-time during normal working hours. The documentation should also show the business is small under the NAICS code 336611. A woman is presumed economically disadvantaged if she has a personal net worth of less than $750,000 (with some exclusions), her adjusted gross yearly income averaged over the three years preceding the certification less than $350,000, and the fair market value of all her assets is less than $6 million f. If claiming Woman Owned Small Business status, provide documentation that shows the company is at least 51% owned and controlled by one or more women, and primarily managed by one or more women that make long-term decisions for the business and hold the highest officer position in the business and work at the business full time during normal working hours. The women must be U.S. citizens. The documentation should also show the business is small under the NAICS code 336611. g. If claiming Small Business status, provide documentation to show the business is small under NAICS code 336611. 5. Statement of Proposal Submission: Statement whether your company WILL submit a proposal as a prime contractor if a solicitation is issued as a result of this Sources Sought Notice. 6. Past Performance Information: Evidence of experience in work similar in type and scope to include contract numbers, project titles, and dollar amounts, points of contact and telephone numbers. If two companies are planning to conduct business and submit an offer as a Joint Venture or similar type of teaming agreement, they are requested to provide past performance information on projects of similar scope that they have performed together as a Joint Venture, if available. Providing individual past performance documentation from each company on separate projects where the two did not work together may be considered less relevant. CCR:Interested parties should register in the Central Contractor Registration (CCR) as prescribed in FAR Clause 52.232-33. The CCR can be obtained by accessing the internet at www.ccr.gov or by calling +1 (555) 000-0000. Disclaimer and Important Notes:This Sources Sought Notice is for market research purposes only and does not constitute a Request for Proposal/Quotation; and, it is not considered to be a commitment by the Government to award a contract nor will the Government pay for any information provided; no basis for claim against the Government shall arise as a result from a response to this Sources Sought Notice or Government use of any information provided. Failure to respond or submit information in sufficient detail may result in a company not being considered a likely offeror when making a decision on whether or how to set aside a solicitation for restricted competition. Regardless of the information obtained from this Sources Sought Notice, the Government reserves the right to consider any arrangement as deemed appropriated for this requirement. Respondents are advised that the Government is under no obligation to acknowledge receipt of the information received or provide feedback to respondents with respect to any information submitted. No proprietary, classified, confidential, or sensitive information should be included in your response to this Sources Sought Notice. The Government reserves the right to use any information provided by respondents for any purpose deemed necessary and legally appropriate, including using technical information provided by respondents in any resultant solicitation. At this time no solicitation exists; therefore, Do Not Request a Copy of the Solicitation. After a review of the responses received, a pre-solicitation notice and solicitation may be published on Federal Business Opportunities (FedBizOpps) website. It is the potential offeror's responsibility to monitor FedBizOpps for release of any future solicitation that may result from this Sources Sought Notice. However, responses to this Sources Sought Notice will not be considered adequate responses to any resultant solicitation.

More opportunities from Department Of Homeland Security → Sflc Procurement Branch 1(00080)

Same awarding agency

NAICS: 423830
Federal
Supply of Marine-Grade Materials and Spare PartsThe contract involves the supply of marine-grade materials and spare parts specifically designed for shipboard use, including valves, piping, gaskets, electrical components, and consumables. All provided items must comply with the Buy American Act as well as adhere to stringent military specifications, ensuring high-quality and regulatory compliance for defense-related applications. The procurement is being conducted by the Department of Homeland Security through its Sflc Procurement Branch 1 and represents a subcontract arrangement under NAICS code 423830, which relates to the wholesale distribution of industrial machinery and equipment. The place of performance for this contract is set in North Charleston, with a postal code of 29405, although some address details remain unspecified. The solicitation was posted on June 12, 2026, and appears to be open for sourcing suppliers who can meet the rigorous standards for maritime and military-grade components. Since the contract data does not indicate any set-aside type, it is likely open to a variety of qualified vendors capable of fulfilling the technical and regulatory requirements. The nature of the contract emphasizes dependable delivery of essential spare parts and materials critical for the operational readiness and maintenance of maritime vessels operated or overseen by the Department of Homeland Security.
Industrial Machinery and Equipment Merchant Wholesalers

POSTED

5 months ago

DEADLINE

N/A
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS