Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 14 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Specialized Facility Provider

Active

SBIR / STTR

Response Deadline10/21/2026, 04:00:00 AM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Specialized Facility Provider subcontract, issued by the Defense Advanced Research Projects Agency under the Department of Defense, provides prime contractors with access to certified testing environments. These facilities include radiation chambers, wind tunnels, and biosafety labs, with a specific requirement for the provider to maintain all necessary environmental permits for effluents and Biosafety Level certifications. The provider is responsible for delivering raw test data and detailed facility usage logs generated during the experiments. This opportunity is designated as a Total Small Business Set-Aside under the SBIR/STTR mandate, restricted to firms with fewer than 500 employees. Falling under NAICS code 541380, the solicitation was posted on September 2, 2026, with a response deadline of October 21, 2026.

General Info

DARPA small business subcontract for certified testing facilities, raw data, and usage logs.

Agency

Department of Defense → Defense Advanced Research Projects Agency

NAICS

541380 - Testing Laboratories and Services

Place of Performance

Not specified

Set-Aside

SBA

Documents

This scope was carved out of DPA26BZ06-DV024.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

New World Screwworm Networked Detection, Identification, and Surveillance System

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedSep 2

subcontract

Response DeadlineOct 21

Submission deadline

Response Deadline

10/21/2026, 04:00:00 AM UTCin 10 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment of Defense → Defense Advanced Research Projects Agency

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment of Defense → Defense Advanced Research Projects Agency

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Provides access to certified testing facilities for prime contractors on DARPA projects. Hosts experiments in biosafety labs, wind tunnels, or radiation chambers. Maintains Biosafety Level (BSL) certifications and environmental permits for airborne/waterborne effluents. Delivers facility usage logs and raw test data generated within the facility.

Similar Contracts

Same NAICS industry code

Joliet Job Corps-Request for Quote Asbestos Testing & Abatement

Solicitation # Joliet JCC Asbestos Testing & Abatement

Management & Training Corporation (MTC) is seeking quotes for a subcontracting opportunity to provide asbestos testing and abatement services at the Joliet Job Corps center in Joliet, Illinois. The scope of work includes sampling and laboratory analysis of ceiling tiles in the Administration Academic Building and Welcome Center, as well as testing and potential removal of asbestos-containing materials from floor tiles in the Gymnasium, Warehouse, and Warehouse Storage Area, totaling approximately 4,200 square feet. All work must be performed by contractors holding all required State of Illinois licenses and certifications, utilizing accredited laboratories, and adhering to federal, state, OSHA, and EPA regulations. This fee-for-service solicitation is open to various small business categories, including VOSB, SDVOSB, WOSB, and HUBZone certified firms. Bids must be submitted via email by October 21, 2026, and must include a completed bid sheet, supplier packet (W-9, self-certification, and acceptance of terms), proof of insurance, and three references for similar projects. Award selection will be based on best value. The contract is subject to Service Contract Labor Standards, specifically Wage Determination No. 2015-5019 Rev. 31, and includes strict requirements for information security, Department of Labor records management, and the provision of waste shipment records and a final project completion report.

Joliet Job Corps

POSTED

about 15 hours ago

DEADLINE

Chemical Fume Hood and Biosafety Cabinet CertificationThis subcontract involves the annual certification and calibration of laboratory airflow containment systems for prime contractors working on Mississippi Department of Public Safety projects. The scope of work includes the testing and certification of 43 chemical fume hoods and 5 biosafety cabinets, utilizing specialized airflow anemometers and HEPA filter testing equipment. The selected provider is required to deliver formal certification reports and apply calibration stickers to all tested units. To qualify for this engagement, the contractor must hold ISO/IEC 17025 accreditation specifically covering field calibrations and airflow containment. The opportunity is categorized under NAICS code 541380, with a response deadline set for November 10, 2026.

MS DEPT of PUBLIC SAFETY

POSTED

DEADLINE

in about 1 month

State Farm Agribusiness – Soil Samples and Analysis

Solicitation # QQ-129752

The Virginia Department of Corrections Division of Institutions is soliciting bids for soil sampling and analysis services to support State Farm Agribusiness. This project requires professional soil testing to ensure optimal agricultural productivity at the State Farm location in Virginia. Interested vendors must submit their responses by October 16, 2026, to be considered for the contract. The solicitation, identified as QQ-129752, is managed by Deborah Ayers. All prospective bidders should refer to the provided specifications and terms and conditions to ensure full compliance with the agency's requirements for soil analysis. The contract is categorized as a SLED organization procurement focused on maintaining the agricultural integrity of the state's farming operations.

DOC - Division of Institutions

POSTED

DEADLINE

First Article Testing and NDI Services for F100 ContainersThis subcontract involves providing specialized testing and inspection services for F100 containers under DLA Aviation at Oklahoma City. The scope of work requires the performance of dimensional inspections using NIST-traceable tooling, visual audits based on USAF standards, and non-destructive inspection methods such as X-ray or Dye Penetrant. The final deliverable for these services is a completed First Article Test Report. To ensure compliance and quality, the contractor must employ certified NDI technicians and adhere to ISO 10012-1 calibration standards. This opportunity falls under NAICS code 541380 and is managed by the Department of Defense. Interested parties must submit their responses by November 12, 2026.

Ok DLA Aviation At Oklahoma City

POSTED

DEADLINE

in about 1 month

Non-Destructive Testing (NDT) and Ultrasonic InspectionThis subcontract involves providing specialized non-destructive testing and ultrasonic inspection services for prime contractors supporting Navsup Weapon Systems Support Mech projects under the Department of Defense. The scope of work includes performing dye penetrant inspections on valve body weld ends and ultrasonic inspections on starting materials, adhering to specific technical standards including T9074-AS-GIB-010/271, S9074-AR-GIB-010A/278, and MIL-STD-2132. A critical requirement for this contract is that the service provider must be an approved source for Critical Safety Item testing. The successful contractor is responsible for delivering certified NDT and Ultrasonic Inspection Reports. The opportunity is categorized under NAICS code 541380, with a response deadline set for November 9, 2026.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Steam Jacketed Kettle Hydrostatic TestingThis subcontract involves performing hydrostatic pressure testing for prime contractors on vessel repair projects managed by the Navsup Flc Sigonella Naples Office. The scope of work requires the use of hydrostatic pumps, pressure gauges, and testing manifolds to pressurize steam jacketed kettles with water to identify leaks and structural deformation. All activities must be conducted in strict accordance with Reference 65111-3-009 Rev A/1 and FAR 52.246-1. The selected provider is responsible for delivering a formal hydrostatic test report and a certification confirming the integrity of the kettles. This opportunity falls under NAICS code 541380 and is associated with the Department of Defense. Interested parties should note the response deadline of October 15, 2026.

Navsup Flc Sigonella Naples Office

POSTED

DEADLINE

Flight Critical Component NDT InspectionThe Flight Critical Component NDT Inspection subcontract involves providing independent non-destructive testing for prime contractors on DLA Aviation projects. The primary objective is to verify the structural integrity of regulating valves through a 100% inspection of critical characteristics. Approved testing methodologies include ultrasonic, radiographic, or liquid penetrant methods to ensure the highest safety and quality standards for flight critical components. To qualify, service providers must maintain ISO 9001 certification and employ technicians certified at NDT Level II or III. The successful contractor is responsible for delivering both certified NDT inspection reports and the certified components. This opportunity is managed by the Department of Defense through the Pa DLA Aviation At Philadelphia office under NAICS code 541380, with a response deadline of October 20, 2026.

Pa DLA Aviation At Philadelphia

POSTED

DEADLINE

Hydrostatic and Non-Destructive Testing (NDT)This subcontract for Navsup Weapon Systems Support Mech involves performing critical safety testing for prime contractors. The scope of work includes conducting hydrostatic testing according to drawing G985455 and non-destructive testing on weldments. All testing must be performed using calibrated gauges that comply with MIL-STD-45662 or ISO10012-1 standards. To be eligible, the provider must hold ISO/IEC 17025 accreditation. The contract requires the delivery of test certification reports in accordance with CDRL DI-MISC-S08678. This opportunity falls under NAICS code 541380 and is associated with the Department of Defense.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

NETA Certified Electrical Power Distribution System TestingThis SDVOSB sole source subcontract, managed by the Department of Veterans Affairs Network Contract Office 15, involves NETA Certified Electrical Power Distribution System Testing for medical center projects in Marion. The scope of work requires the maintenance, inspection, adjustment, and tri-annual electrical testing of critical infrastructure, including 325 electrical panels, 135 transformers, 220 switches, 6 generators, and 25 automatic transfer switches. To ensure compliance and safety, all work must be performed by NETA-certified technicians under the guidance of a Supervising Field Service Engineer. The project must strictly adhere to NETA 2019, NFPA 70E, and VHA Directive 1028 standards, with a requirement for the delivery of comprehensive maintenance and testing reports. The response deadline for this opportunity is November 9, 2026.

255-NETWORK Contract Office 15 (36C255)

POSTED

DEADLINE

First Article Testing and Certification ServicesThis subcontract for First Article Testing and Certification Services supports prime contractors on DLA Land Warren projects within the Department of Defense. The scope of work involves executing rigorous testing protocols for light-transmitting indicating panels to validate manufacturing processes in accordance with the Technical Data Package and FAR 52.209-3. Using precision measurement equipment, the contractor must verify that all hardware meets strict specifications and deliver a government-approved First Article Test Report. The project is categorized under NAICS code 541380 and will be performed in Warren. To ensure the highest level of quality and consistency, the contractor is required to adhere to ISO 9001:2015 quality standards. The solicitation was posted on October 9, 2026, with a response deadline of November 9, 2026.

DLA Land Warren

POSTED

DEADLINE

Production Lot Testing and Inspection ServicesThis subcontract for Production Lot Testing and Inspection Services supports the Department of Defense through Navsup Weapon Systems Support Mech. The selected provider will perform technical testing and inspections for prime contractors to validate production lots, ensuring all work adheres to technical specifications and the 651AS drawing series. Key responsibilities include coordinating government-witnessed testing and maintaining strict compliance with DCMA QAR requirements and DD Form 1423. The primary deliverable for this engagement is an approved Production Lot Test/Inspection Report. Classified under NAICS code 541380, the opportunity was posted on October 9, 2026, with a response deadline of November 9, 2026.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Non-Destructive Testing (NDT) and Quality ValidationThis subcontract for Non-Destructive Testing (NDT) and Quality Validation supports DLA Aviation projects through the Department of Defense. The selected contractor will perform specialized inspection and testing to validate the structural integrity of Cold Section Modules for prime contractors. Required technical capabilities include the use of specialized equipment to conduct X-ray, Ultrasonic, Magnetic Particle, or Dye Penetrant inspections. To qualify, contractors must hold AS 9100 and ISO 9001:2000 certifications. Key deliverables for the project include detailed inspection reports, certifications of conformance, and validated Receiving Reports. The solicitation was posted on October 9, 2026, with a response deadline of November 12, 2026.

Ok DLA Aviation At Oklahoma City

POSTED

DEADLINE

in about 1 month

More opportunities from Department of Defense → Defense Advanced Research Projects Agency

Same awarding agency

High-Resolution Metrology and Verification LabThis subcontract opportunity, titled High-Resolution Metrology and Verification Lab, supports prime contractors on DARPA SHIELDER projects through the analytical verification of etched structures. The scope of work involves conducting cross-sectional analysis to verify pattern transfer and measuring sidewall and line-edge roughness at the nanometer scale. Using SEM, TEM, and AFM equipment, the contractor will verify etch selectivity and dimensional control, delivering high-resolution metrology data reports and imagery that confirm 100:1 aspect ratios and roughness levels below 2 nm RMS. The project is a total small business set-aside under NAICS code 541380, specifically mandating SBIR/STTR compliance for firms with fewer than 500 employees. Interested parties must possess CMMC Level 1 certification to be eligible. The solicitation was posted on September 2, 2026, with a response deadline of October 21, 2026.

Testing Laboratories and Services

POSTED

about 1 month ago

DEADLINE

Extreme High-Aspect-Ratio Fabrication SpecialistThe Extreme High-Aspect-Ratio Fabrication Specialist subcontract supports DARPA SHIELDER projects by providing specialized deposition, patterning, and deep-etching of hard-mask materials. The scope of work involves executing scalable deposition and aggressive dry plasma etching to achieve 100:1 aspect ratios while maintaining strict critical dimension control and ensuring sidewall roughness remains below 2 nm RMS. Technical execution requires the use of DRIE systems alongside E-beam or photolithography tools to deliver high-precision fabricated wafers. This opportunity is a total small business set-aside under NAICS code 334413, specifically mandated for SBIR/STTR entities with fewer than 500 employees. To be eligible, contractors must adhere to cleanroom standards and maintain CMMC Level 1 certification. The response deadline for this Department of Defense requirement is October 21, 2026.

Semiconductor and Related Device Manufacturing

POSTED

about 1 month ago

DEADLINE

Novel Hard-Mask Material Developer/SupplierThis subcontract opportunity is for a Novel Hard-Mask Material Developer/Supplier to support prime contractors on DARPA SHIELDER projects. The selected provider will be responsible for supplying or synthesizing novel inorganic films or sputtered metals, specifically focusing on low-stress mask films that maintain an etch selectivity exceeding 150:1 under aggressive plasma conditions. All materials must be of semiconductor-grade purity to prevent contamination and must be compatible with standard lithographic workflows and patternable via secondary chemical plasma. The contract is issued by the Defense Advanced Research Projects Agency under the Department of Defense and is designated as a Total Small Business Set-Aside. Eligible applicants must meet SBIR/STTR mandates and employ fewer than 500 people. The scope of work involves the delivery of high-purity hard-mask materials or precursor chemicals, with a response deadline set for October 21, 2026.

All Other Basic Organic Chemical Manufacturing

POSTED

about 1 month ago

DEADLINE

High-Temperature/High-Pressure Wind Tunnel Component FabricationThis subcontract, issued by the Defense Advanced Research Projects Agency under the Department of Defense, involves the fabrication of specialized wind tunnel components for prime contractors working on hypersonic projects. The scope of work focuses on the precision machining of nozzle throats and reservoirs using high-performance superalloys such as Inconel, as well as the integration of sensor ports and optical windows made from sapphire or diamond. All delivered hardware and modified wind tunnel sections must be engineered to withstand extreme hypersonic thermal and pressure loads. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 332710, specifically targeting firms with fewer than 500 employees. Due to the nature of the defense-related hardware, strict adherence to ITAR and EAR compliance is required. The solicitation was posted on September 2, 2026, with a response deadline of October 21, 2026.

POSTED

about 1 month ago

DEADLINE

Multi-Fidelity Hypersonic Simulation & ModelingThis subcontract, titled Multi-Fidelity Hypersonic Simulation and Modeling, supports DARPA hypersonic research projects by developing simulation strategies to model thermo-fluid-dynamic disturbances. The scope of work involves tracing disturbance evolution from origin to test section and integrating simulation data with physical measurements for model validation. Execution of these tasks requires the use of advanced CFD software and high-performance computing clusters. The opportunity is a total small business set-aside under NAICS code 541330, specifically targeting firms with fewer than 500 employees. Awardees must maintain ITAR and EAR compliance and meet CMMC Level 1 security standards. The final deliverables for this effort include comprehensive computational models and corresponding mitigation plans. Responses are due by October 21, 2026.

Engineering Services

POSTED

about 1 month ago

DEADLINE

Non-Intrusive Hypersonic Diagnostic Systems DevelopmentThe Non-Intrusive Hypersonic Diagnostic Systems Development subcontract, issued by the Defense Advanced Research Projects Agency, focuses on the creation and implementation of diagnostics to measure noise and flow disturbances for hypersonic wind tunnel projects. The scope of work includes designing sensors capable of withstanding hypersonic environments, performing spatial and temporal mapping of flow paths, and correlating upstream fluctuations with downstream noise. To achieve these goals, the contractor must utilize high-frequency acoustic sensors and specialized window materials to deliver final diagnostic hardware and detailed flow maps. This opportunity is a total small business set-aside under NAICS code 541715, specifically targeting firms with fewer than 500 employees in accordance with SBIR/STTR mandates. Due to the sensitive nature of the defense work, the selected contractor must maintain strict ITAR/EAR compliance and meet CMMC Level 1 cybersecurity standards. The response deadline for this requirement is October 21, 2026.

Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

about 1 month ago

DEADLINE

Specialized Instrumentation SupplierThis subcontract opportunity with the Defense Advanced Research Projects Agency under the Department of Defense focuses on the procurement of innovative instrumentation and custom-fabricated components for R&D projects. The selected supplier will be responsible for the design and manufacture of specialized hardware, including custom sensors and test rigs, utilizing precision manufacturing and electronics fabrication. To ensure high standards of production, the provider must maintain ISO 9001 quality certifications for all delivered physical hardware. The contract is designated as a Total Small Business Set-Aside, specifically adhering to SBIR/STTR mandates for companies with fewer than 500 employees, falling under NAICS code 334511. Interested parties must submit their responses by October 21, 2026. This engagement is tailored for specialized firms capable of supporting prime contractors in the delivery of high-precision technical instrumentation.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 1 month ago

DEADLINE

Research Institution PartnerThis subcontract opportunity is for a Research Institution Partner to support prime contractors on DARPA STTR projects through fundamental research and theoretical development. The selected partner will utilize university-grade laboratory facilities and faculty expertise to execute research tasks and academic peer reviews, ultimately providing technical contributions and findings for the project feasibility report. Due to the nature of the work, the partner must strictly adhere to all Export Controlled and ITAR information restrictions. The opportunity is designated as a Total Small Business Set-Aside under the SBIR/STTR mandate for organizations with fewer than 500 employees, falling under NAICS code 541715. Managed by the Defense Advanced Research Projects Agency within the Department of Defense, the solicitation was posted on September 2, 2026, with a response deadline of October 21, 2026.

Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

about 1 month ago

DEADLINE

Technical Research SubcontractorThe Technical Research Subcontractor contract supports prime contractors on DARPA SBIR projects by providing specialized research and technical validation. The scope of work involves conducting experiments, mathematical modeling, and simulations to establish technical feasibility, utilizing high-performance computing and specialized laboratory facilities. Key deliverables include validated data sets, feasibility proofs, and comprehensive technical reports, all while maintaining strict compliance with Export Control and ITAR restrictions. This opportunity is a subcontract under a Total Small Business Set-Aside, specifically mandated for SBIR/STTR participants with fewer than 500 employees, falling under NAICS code 541715. Managed by the Defense Advanced Research Projects Agency within the Department of Defense, the solicitation was posted on September 2, 2026, with a response deadline of October 21, 2026.

Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

about 1 month ago

DEADLINE

CMMC & NIST SP 800-172 Compliance ConsultingThis subcontract opportunity is for CMMC and NIST SP 800-172 Compliance Consulting to support prime contractors on Defense Advanced Research Projects Agency projects. The selected provider will deliver cybersecurity auditing and compliance services, specifically performing annual affirmations for 24 NIST SP 800-172 requirements and ensuring adherence to CMMC Level 2 self-assessment standards. Key deliverables include comprehensive compliance reports and security documentation, with a strict requirement for the provider to hold Certified CMMC Professional certification and disclose any Organizational Conflicts of Interest. The project is designated as a Total Small Business Set-Aside under NAICS code 541519, specifically targeting firms with fewer than 500 employees. Interested parties must submit their responses by October 21, 2026. This engagement focuses on maintaining rigorous security standards for Department of Defense initiatives through specialized technical oversight and certification validation.

Other Computer Related Services

POSTED

about 1 month ago

DEADLINE

CORPS Software Application DevelopmentThe CORPS Software Application Development subcontract involves the creation of full-stack software for prime contractors working on DARPA projects. The primary objective is to transform predictive models into a functional digital tool by building robust back-end infrastructure and front-end user interfaces. A critical component of the project is the development of interactive decision-support interfaces that incorporate dynamic uncertainty and confidence metrics, necessitating specialized expertise in interactive data visualization. This opportunity is a total small business set-aside under NAICS code 541511, specifically targeting firms with fewer than 500 employees. To be eligible, contractors must possess CMMC Level 2 Self certification. The final deliverable is a fully functional software suite comprising both front-end and back-end systems. Interested parties must submit their responses by October 21, 2026.

Custom Computer Programming Services

POSTED

about 1 month ago

DEADLINE

Casualty Stream Prediction & Medical Needs ModelingThis subcontract opportunity with the Defense Advanced Research Projects Agency focuses on the mathematical and algorithmic development of a core prediction engine. The project involves creating automated prediction models for casualty streams and metrics-based evaluation systems designed to project lifesaving potential within disconnected, intermittent, and limited communication states. The successful provider will be responsible for delivering the back-end logic and core prediction algorithms, requiring specialized expertise in Advanced Computing, Autonomy, and Trusted AI. This is a Total Small Business Set-Aside under the SBIR/STTR mandate, restricted to firms with fewer than 500 employees. Eligible contractors must possess CMMC Level 2 self-certification. The solicitation was posted on September 2, 2026, with a response deadline of October 21, 2026.

Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

about 1 month ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS