Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Specialized Hub and Pipe Fitting Supply

Active

Federal

Response Deadline10/16/2026, 09:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the supply of precision-machined hubs and pipe fittings for prime contractors operating at the NASA Stennis Space Center. The scope of work requires the machining of hubs and specific pipe sections using dual certified SA105 and SA350-LF2 materials, specifically 4 SCH XX with a 4.500 outer diameter and 3.152 inner diameter. To ensure quality and regulatory adherence, the provider must furnish a Certificate of Compliance and detailed Material Test Reports for all delivered components. The contract is categorized under NAICS code 332996 and focuses on the delivery of these specialized machined parts to the designated performance site in Mississippi.

General Info

Supply of precision-machined hubs and pipe fittings for NASA Stennis Space Center.

Agency

National Aeronautics And Space Administration

NAICS

332996 - Fabricated Pipe and Pipe Fitting Manufacturing

Place of Performance

Stennis Space Center, MS, 39529, USA

Set-Aside

NONE

Documents

This scope was carved out of 80NSSC27944845Q.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Grayloc Products (hubs, clamps/studs/nuts, and seals

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 14

subcontract

Response DeadlineOct 16

Submission deadline

Response Deadline

10/16/2026, 09:00:00 PM UTCin 2 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyNational Aeronautics And Space Administration

ContactsNo contacts available

OfficeN/A

Organization / AgencyNational Aeronautics And Space Administration

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies precision-machined hubs and pipe fittings for prime contractors on NASA Stennis Space Center projects. Machines hubs and schedule-specific pipe sections using dual certified SA105 / SA350-LF2 materials, specifically 4 SCH XX [4.500 OD x 3.152 ID]. Requires Certificate of Compliance and Material Test Reports (MTRs). Delivers machined hubs and pipe sections.

Similar Contracts

Same NAICS industry code

MANIFOLD ASSEMBLY, HYDR

Solicitation # SPE7M3-27-T-0467

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 2 hours ago

DEADLINE

Solicitation # SPE7M3-27-T-0466

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 2 hours ago

DEADLINE

Supply of Pipe-to-Hose Elbows (NSN 4730013073641)This subcontract involves the supply of 121 specialized pipe-to-hose elbows, specifically part number 218-1, for the DLA Weapons Support Fluid Handling Division. The contractor is responsible for manufacturing or sourcing these components according to the DLA Master List RA001 and ensuring all units are delivered to DLA Distribution centers. Performance of the contract takes place in Albany. Strict adherence to military and federal standards is required, including packaging, marking, and palletization per MIL-STD-2073-1E, MIL-STD-129, and RP001. Additionally, the provider must comply with the Berry Amendment, DFARS 252.225-7001, and DFARS 252.204-7012. The project falls under NAICS code 332996.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

TUBE ASSEMBLY, METAL

Solicitation # SPE4A5-27-T-1022

Solicitation SPE4A5-27-T-1022 is a fixed-price request for quotations issued by the DLA Weapons Support ASC Supplier Oper OEM Division for the procurement of 98 metal tube assemblies, identified by NSN 4710-00-981-3098 and Bell Textron Inc part numbers 205-060-581-001 and 205-060-581-1. The contract specifies a need ship date of April 6, 2027, with an original required delivery date of March 8, 2028. Delivery is established as FOB Origin, with inspection and acceptance occurring at the destination, specifically the DDSP New Cumberland Facility in Pennsylvania. Payment and receiving reports must be processed electronically through the Wide Area Workflow system. The contractor must adhere to strict quality and technical standards, including ISO 9001:2015 certification and specific sampling methods per MIL-STD-1916 or ASQ H1331. Key compliance requirements include CMMC Level 2 self-assessment, supply chain traceability documentation, and adherence to the Buy American Act and Berry Amendment. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, while hazardous materials require labeling per the Hazard Communication Standard. Notably, the use of additive manufacturing is prohibited unless specifically authorized, and offers utilizing such processes will be ineligible for award.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

TUBE ASSEMBLY, METAL

Solicitation # SPE4A1-26-T-2811

This solicitation, issued by the DLA Aviation Supply Chain under number SPE4A1-26-T-2811, is a Request for Quotations for the procurement of four metal tube assemblies, specifically Lockheed Martin Corporation part number 16P125-801 (NSN 4710-01-048-8264). The procurement is categorized under NAICS code 332996 and requires compliance with the Buy American Act, the Berry Amendment, and the Balance of Payments Program. Key technical and security requirements include a Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment and adherence to the DLA Master List of Technical and Quality Requirements. Notably, the government will not evaluate offers for items produced via additive manufacturing unless specifically authorized. The contract specifies destination inspection and acceptance at the DLA Distribution Depot Hill in Utah, with delivery terms set as FOB Origin. Packaging must comply with ASTM D3951, while marking and labeling must follow MIL-STD-129. Quality assurance and sampling must be conducted in accordance with MIL-STD-1916, ASQ H331, or a comparable zero-based sampling plan, with specific attribute verification levels assigned to critical, major, and minor characteristics. Offerors must submit quotes through the DLA Internet Bid Board System (DIBBS) by the deadline of September 24, 2026. Payment and receiving reports are to be processed electronically via the Wide Area Workflow (WAWF) system.

AVIATION SUPPLY CHAIN

POSTED

DEADLINE

EXPANSION JOINT, PIPE

Solicitation # SPE7M3-27-T-0459

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

AIR DRIER AND COOLER, P

Solicitation # SPE7L1-27-T-1426

Solicitation SPE7L1-27-T-1426, issued by the DLA Weapons Support Land Supply Chain, is for the procurement of 12 pipeline air driers and coolers (NSN 4730-01-361-2173). The contract is managed under the First Destination Transportation program with delivery to DLA Distribution San Joaquin in Tracy, California. Key delivery milestones include a need ship date of December 21, 2026, and an original required delivery date of September 26, 2027. The procurement includes a mandatory First Article Test (FAT) requiring two samples, with the contractor providing 20 days notice before testing begins. Technical compliance is governed by the DLA Master List of Technical and Quality Requirements, with specific mandates for source control drawings and a prohibition on Class I ozone depleting chemicals. Quality assurance requires the manufacturer's inspection system to comply with SAE AS9003 or ISO 9001, with inspection and acceptance occurring at the origin. Packaging must adhere to MIL-STD-2073-1E and Special Packaging Instruction AK13612173. Administrative requirements include electronic invoicing via Wide Area WorkFlow and adherence to the Buy American Act. Evaluation preferences are provided for certified HUBZone Small Business Concerns.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

ELBOW, PIPE TO HOSE

Solicitation # SPE7M3-27-T-0455

Solicitation SPE7M3-27-T-0455 is a request for quotations issued by the DLA Weapons Support Fluid Handling Division for the procurement of pipe-to-hose elbows. The items are designated as critical application items under NSN 4730013073641, with the specific manufacturer part number identified as GT Development Corp DBA 78528 P/N 218-1. The total requirement consists of 121 units divided across three contract line items: 8 units for CLIN 0001, 29 units for CLIN 0002, and 84 units for CLIN 0003. Delivery is set for 227 days after the award, with shipments directed to DLA Distribution centers in Albany, Georgia; New Cumberland, Pennsylvania; and Barstow, California. The terms are FOB Origin, and both inspection and acceptance will occur at the destination. The contract mandates strict adherence to quality and packaging standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. Technical and quality requirements are further governed by the DLA Master List via reference RA001. Key regulatory compliance includes the Buy American and Balance of Payments Program (DFARS 252.225-7001), the Berry Amendment, and cybersecurity standards under DFARS 252.204-7012. All quotes must be submitted through the DLA Internet Bid Board System (DIBBS), and the successful contractor is required to use the Wide Area Workflow (WAWF) system for electronic invoicing and receiving reports.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

ADAPTER, STRAIGHT, PIPE

Solicitation # SPE7M4-27-T-1199

Solicitation SPE7M4-27-T-1199 is a fixed-price procurement issued by the DLA Weapons Support Fluid Handling Division for 902 straight pipe-to-tube adapters, identified by NSN 4730-00-620-6904. The required hardware must be constructed from carbon steel with cadmium plating and include the necessary nut and sleeve. Delivery is required within 161 days after the order, with a need ship date of April 6, 2027, and a final required delivery date of April 11, 2027. The place of performance and delivery is Hill AFB, Utah, with FOB terms set to origin. The contract mandates strict quality and packaging compliance, requiring the supplier to provide a Certificate of Quality Compliance for each manufacturing lot, which must be uploaded to the iRAPT system. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, with palletization following RP001 requirements. Inspection and acceptance will occur at the origin. Evaluation for award includes a price preference for certified HUBZone Small Business Concerns, and the use of additive manufacturing is prohibited. Suppliers must also comply with the Buy American Act, the Berry Amendment, and DFARS cybersecurity and telecommunications restrictions. Invoicing and payment are to be processed electronically through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Solicitation # SPE7M3-27-T-0440

Solicitation SPE7M3-27-T-0440 is a fixed-price contract issued by the DLA Weapons Support Fluid Handling Division for the procurement of 170 units of pipe elbows (NSN 4730-00-555-8145). These components are designated as critical application items and must be manufactured from type 304 corrosion resisting steel with a passivated finish, featuring a 90-degree flow angle and 1/4 inch nominal pipe size with male to female ANPT threads. Production requires a forging process and must adhere to the latest revisions of SAE AS4842 and AS4854. The items must be produced by an accredited manufacturer or assembler listed on the PRI Qualified Manufacturer List or Qualified Products List. The contract mandates strict compliance with DLA packaging requirements (RP001) and marking standards (MIL-STD-129), with delivery scheduled for the DLA Distribution DDSP New Cumberland facility by April 27, 2027. Inspection and acceptance will occur at the destination. Key regulatory requirements include adherence to the Buy American Act, the Berry Amendment, and restrictions on the use of ozone-depleting chemicals and mercury. Invoicing is to be processed electronically via the Wide Area WorkFlow system. Offers are submitted through DIBBS, and the government may apply a HUBZone price evaluation preference.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

COUPLING HALF, QUICK DI

Solicitation # SPE7M3-27-T-0442

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

STRAINER, SEDIMENT

Solicitation # SPE7M3-26-T-9453

Solicitation SPE7M3-26-T-9453, issued by the DLA Land and Maritime Fluid Handling Division, is a request for quotations for four steel sediment strainers under NSN 4730-01-158-7584. The required hardware must feature a 6 inch nominal pipe size with 150 class flanged ends and a duplex style stainless steel basket consisting of 80 mesh and 0.007 inch diameter wire. This is designated as a critical application item. Delivery is required FOB Origin to the DLA Distribution New Cumberland facility in Pennsylvania, with a delivery period of 201 days. The contract mandates strict adherence to technical and quality requirements via RA001 and packaging standards per MIL-STD-2073-1E, MIL-STD-129, and RP001. A specific environmental restriction prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, per NAVSEA 5100-003D. Inspection and acceptance will occur at the destination governed by FAR 52.246-2. Offerors must submit quotes through the DIBBS system and comply with the Buy American Act, the Berry Amendment, and NIST SP 800-171 cybersecurity assessment requirements. Invoicing and receiving reports must be processed electronically through the Wide Area WorkFlow system.

FLUID HANDLING DIVISION

POSTED

DEADLINE

More opportunities from National Aeronautics And Space Administration

Same awarding agency

High-Temperature/High-Pressure Fastener SupplyThis subcontract for High-Temperature/High-Pressure Fastener Supply involves the manufacture and delivery of specialized spherical face studs and matching nuts for prime contractors operating at the NASA Stennis Space Center. The scope of work specifically requires the production of assemblies using SA193-B8 studs with SA194-GR8 nuts, as well as SA193-B7 studs with SA194-GR2H nuts. To ensure quality and regulatory adherence, the contractor must provide a Certificate of Compliance and detailed Material Test Reports for all supplied components. The project is categorized under NAICS code 339993 and is centered on providing critical hardware capable of withstanding extreme temperature and pressure environments.

Fastener, Button, Needle, and Pin Manufacturing

POSTED

about 7 hours ago

DEADLINE

High-Strength Clamp SupplyThis subcontract involves the supply of high-strength, heavy-duty clamps for prime contractors operating at the NASA Stennis Space Center. The scope of work includes the forging and machining of 2 inch and 4 inch high-pressure flange connection clamps, utilizing specific materials such as SA182-F304 Stainless Steel and SA266 GR3 Alloy Steel. To ensure quality and regulatory adherence, the contractor is required to provide a Certificate of Compliance and detailed Material Test Reports for all supplied components. The project falls under NAICS code 332999 and is centered on supporting critical infrastructure projects within the National Aeronautics And Space Administration.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 7 hours ago

DEADLINE

High-Pressure Seal Ring SupplyThis subcontract involves the manufacture and supply of specialized high-pressure seal rings for prime contractors operating at the NASA Stennis Space Center. The scope of work includes the production of Transition, R-Con, and standard seal rings, specifically items S1240N and H90556-1. These components must be manufactured using AISI 630 with PTFE Green CTD and AISI 4140 with MOS2 W/Graphite CTD, adhering strictly to the GPCS 6.3.1.2.1 standard. To ensure quality and regulatory compliance, the provider is required to submit a Certificate of Compliance and detailed Material Test Reports for the delivered goods. The project falls under NAICS code 332999 and is centered at the Stennis Space Center facility in Mississippi.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 7 hours ago

DEADLINE

Grayloc Products (hubs, clamps/studs/nuts, and seals

Solicitation # 80NSSC27944845Q

The National Aeronautics and Space Administration Stennis Space Center is seeking capability statements for the procurement of Grayloc Products, specifically hubs, clamps, studs, nuts, and seals. This requirement is categorized under NAICS code 334516 and is being conducted as an acquisition of commercial items under FAR Part 12. The government intends to issue a sole source contract to Grayloc Products, L.L.C. under the authority of FAR 12.102(a), as they have been determined to be the sole provider of the required components. The scope of work includes various specialized items such as Grayloc seal rings, hubs, and clamps with specific material requirements including AISI 630, SA105, and SA182-F304. Deliverables must include a certificate of compliance and material test reports, with certain PTFE CTD seal rings adhering to GPCS 6.3.1.2.1 standards. Performance and delivery will take place at the Stennis Space Center in Mississippi, with an expected lead time of one to eight weeks after receipt of order. Interested vendors must submit written capability statements referencing the notice ID by October 16, 2026, at 4:00 p.m. CST. Please note that quotes will not be evaluated at this stage, as the government is only requesting capability statements to determine if the procurement should be conducted on a competitive basis.

Analytical Laboratory Instrument Manufacturing

POSTED

about 7 hours ago

DEADLINE

Specialized Transport of Scientific InstrumentationThis subcontract involves the specialized transport and delivery of high-value scientific analyzers for prime contractors supporting NASA Kennedy Space Center projects. The scope of work includes managing freight forwarding and the secure handling of sensitive electronic equipment, culminating in final mile delivery to the NASA BOSS Receiving Warehouse M6-0744 in Orlando, Florida. To ensure the safety of the instrumentation, the carrier is required to maintain specific insurance coverage for high-value scientific equipment. Successful completion of the contract is contingent upon the delivery of signed proof of delivery from the designated warehouse.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

in about 22 hours

Supply of Evident Scientific Vanta C Series XRF AnalyzersThis subcontract involves the procurement and delivery of two fully functional Evident Scientific Vanta C Series XRF Analyzers, specifically Part No. ZDM-VCA-CCCA3-U, to support prime contractors on NASA Kennedy Space Center projects. The scope of work includes the packaging and shipping of this sensitive scientific instrumentation to the NASA BOSS Receiving Warehouse located in Orlando, Florida. The agreement is governed by FAR Part 12 and falls under NAICS code 334519. The contract is managed under the National Aeronautics And Space Administration, with a performance location in the 32899 zip code area.

Other Measuring and Controlling Device Manufacturing

POSTED

DEADLINE

in about 22 hours

Nickel Mask Electroplating and PatterningThis subcontract involves the electroplating and patterning of nickel etch masks onto 4H-SiC wafers to support prime contractors on projects for the NASA Glenn Research Center. The scope of work requires the application of a nickel mask and the use of photolithography or precision patterning equipment to define diaphragm radii ranging from 300 to 900 microns. The project is categorized under NAICS code 332710 and will be performed in Cleveland, Ohio. The final deliverable for this engagement is the provision of 4H-SiC wafers with the specified patterned nickel etch mask applied.

POSTED

DEADLINE

4H-SiC Single Crystal Wafer SupplyThis subcontract involves the supply of high-purity, single crystal 4H-SiC wafers to support prime contractors working on projects for the National Aeronautics and Space Administration at the Glenn Research Center in Cleveland. The scope of work requires the delivery of two 4-inch diameter wafers, each with a thickness of approximately 350 microns. To ensure compatibility with deep reactive ion etching processes, the materials must strictly adhere to specific purity and thickness requirements. The opportunity is categorized under NAICS code 325211 and was posted on October 13, 2026, with a response deadline of October 16, 2026.

Plastics Material and Resin Manufacturing

POSTED

DEADLINE

Dopant Selective Deep Reactive Ion Etching (DRIE) ServicesThis subcontract for the National Aeronautics and Space Administration involves providing high-precision dopant-selective deep reactive ion etching services for 4H-SiC wafers. The project supports prime contractors at the NASA Glenn Research Center in Cleveland, requiring the use of DRIE systems capable of semi-insulating SiC/n-type selectivity. The scope of work requires executing etching on 4-inch single crystal wafers to a depth of 320 microns to produce 30-micron thick diaphragms. The final deliverable consists of two etched 4-inch 4H-SiC wafers that must strictly adhere to all geometric and surface quality specifications.

Semiconductor and Related Device Manufacturing

POSTED

DEADLINE

Dopant Selective Deep Reactive Ion Etching of 4H-SiC Wafer

Solicitation # 80NSSC27946811Q

NASA/NSSC is seeking capability statements for the dopant selective deep reactive ion etching of two 4-inch single crystal 4H-SiC wafers. The project requires etching wafers with a patterned nickel mask to a depth of 320 microns to create 30-micron thick diaphragms with radii between 300 and 900 microns. Technical requirements include a thickness uniformity of plus or minus 5 percent across the wafer, an aspect ratio of no less than 5, smooth sidewalls free of scallops, and fewer than 5 micro mask artifacts per diaphragm surface. Performance will be located at the NASA Glenn Research Center in Cleveland, Ohio. This procurement is being conducted under FAR Part 12 for commercial items or services, and NASA/NSSC intends to issue a sole source contract to Biotronics Inc under the authority of FAR 12.102(a). The current notice is specifically for the collection of capability statements to determine if the procurement should be conducted on a competitive basis; formal quotes will not be evaluated at this time. Interested vendors must submit their qualifications in writing to the primary point of contact, Lindsey McLellan, by October 16, 2026, at 4:00 p.m. CST, ensuring the notice ID 80NSSC27946811Q is referenced.

Semiconductor and Related Device Manufacturing

POSTED

DEADLINE

Evident Scientific Vanta C Series XRF Analyzer

Solicitation # 80NSSC26947140Q

The National Aeronautics and Space Administration (NASA/NSSC) is seeking capability statements for the procurement of two Evident Scientific Vanta C Series XRF Analyzers (Part No. ZDM-VCA-CCCA3-U) for use at the Kennedy Space Center in Orlando, Florida. This sources-sought notice, identified by solicitation number 80NSSC26947140Q, is being conducted under FAR Part 12 for commercial items. NASA intends to issue a sole source contract to Wabtec Inspection Technologies, Inc. dba Evident Scientific under the authority of FAR 12.102(a), as they have been determined to be the sole provider of this specific equipment. Interested vendors must submit written capability statements referencing the Notice ID to the designated points of contact by October 15, 2026, at 12:00 p.m. CST. It is explicitly noted that quotes will not be considered or evaluated at this stage, and oral communications are not acceptable. Once awarded, the contractor will be required to deliver the equipment to the NASA BOSS Receiving Warehouse within 28 business days after receipt of order. The procurement is subject to NASA FAR Supplement Clause 1852.215-84 regarding the Ombudsman.

Other Measuring and Controlling Device Manufacturing

POSTED

DEADLINE

in about 22 hours

Request for Information _ Creation of The United States Space Academy

Solicitation # NASA-USSA-RFI

Pursuant to Executive Order 14423, the National Aeronautics and Space Administration is seeking information to establish the United States Space Academy (USSA), a NASA-led civilian Federal academic institution. The Academy is designed to integrate technical education with leadership development and public service to prepare a diverse pipeline of aerospace professionals, including scientists, engineers, astronauts, and civil servants. This Request for Information (RFI) invites each state to submit one official, Governor-endorsed response through a designated Responding Entity to help NASA assess potential locations and operating solutions. The primary objectives of the RFI are to identify a permanent campus location with a groundbreaking target of no later than 2027, develop interim solutions to begin instruction by 2028, and explore estimated establishment costs and potential non-Federal partnerships. NASA will evaluate submissions based on compliance and the likelihood that the proposed solution enables the effective and efficient creation of the Academy. Responses must be submitted as searchable PDF files by November 16, 2026. This RFI is for planning and evaluation purposes only and does not constitute a procurement solicitation or a binding commitment.

POSTED

DEADLINE

in about 1 month

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS