Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Specialized Inspection Services (NACE Level 3)

Active

Federal

Response Deadline11/09/2026, 04:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract opportunity, issued by the Department of Homeland Security under agency CG-SEA-C21, seeks a qualified provider to deliver specialized inspection services for USCG vessel projects. The selected contractor will provide independent third-party verification of surface preparation and coating application to ensure proper corrosion control for prime contractors. A critical requirement for this engagement is that personnel must hold NACE Level 3 Certification to deliver the necessary independent inspection reports. The project is designated as a total Small Business Set Aside under NAICS code 541380 and will be performed in Jacksonville, Florida. Interested parties must submit their responses by the deadline of November 9, 2026.

General Info

DHS seeks NACE Level 3 certified small businesses for vessel coating inspections in Florida.

Agency

Department Of Homeland Security → CG-SEA-C21

NAICS

541380 - Testing Laboratories and Services

Place of Performance

Jacksonville, FL, 32226, USA

Set-Aside

SBA

Documents

This scope was carved out of 70ZU0127QPBPL0001.

The full solicitation package (4 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

USCGC HAMMER (WLIC 75302) USCG 68A BARGE (68014) DRYDOCK REPAIRS FY2027

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 20

subcontract

Response DeadlineNov 9

Submission deadline

Response Deadline

11/09/2026, 04:00:00 PM UTCin 19 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Homeland Security → CG-SEA-C21

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Homeland Security → CG-SEA-C21

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Provides independent third-party inspection of coating and corrosion control for prime contractors on USCG vessel projects. Performs independent verification of surface preparation and coating application. Requires NACE Level 3 Certification. Delivers independent inspection reports.

Similar Contracts

Same NAICS industry code

Canopy Qualification Testing and EvaluationThe Canopy Qualification Testing and Evaluation subcontract involves providing independent laboratory testing and evaluation of canopy prototypes for prime contractors supporting US Air Force flight safety projects. The scope of work includes conducting form, fit, and function testing, environmental stress testing, optical clarity verification, and impact resistance testing utilizing ballistic rigs and environmental chambers. The successful provider must deliver comprehensive test reports and certification documents. To be eligible, the contractor must maintain ISO/IEC 17025 accreditation and possess DD 2345/JCP access. This opportunity is issued by the Department of Defense under agency FA8212 Afsc Olh Pzaba with a NAICS code of 541380. The response deadline for this requirement is February 16, 2027.

FA8212 Afsc Olh Pzaba

POSTED

about 2 hours ago

DEADLINE

Joliet Job Corps-Request for Quote Asbestos Testing & Abatement

Solicitation # Joliet JCC Asbestos Testing & Abatement

Management & Training Corporation is seeking quotes for a fee-for-service subcontracting opportunity to provide asbestos testing and abatement services at the Joliet Job Corps center in Joliet, Illinois. The scope of work includes sampling and laboratory analysis of ceiling tiles in the Administration Academic Building and Welcome Center, as well as testing and the potential removal and disposal of approximately 600 square feet of asbestos-containing material from the gymnasium floor. All work must be performed by licensed professionals using accredited laboratories and must comply with federal, State of Illinois, OSHA, and EPA regulations. Key deliverables include a sampling plan, waste shipment records, and a final project completion report. This solicitation is open to various small business categories, including VOSB, SDVOSB, WOSB, and HUBZone certified firms. Interested bidders must submit a bid sheet, a completed supplier packet containing a W-9 and self-certification, proof of insurance, and three references for similar projects by October 21, 2026. Award selection is based on best value. The contract is subject to Service Contract Labor Standards, specifically Wage Determination No. 2015-5019 Rev. 31, and includes various FAR clauses regarding small business utilization, minimum wages, and the combating of trafficking in persons. Subcontractors are also required to maintain a Unique Entity Identifier (UEI) for reporting purposes.

Joliet Job Corps

POSTED

about 8 hours ago

DEADLINE

in about 6 hours

Chiller Oil Sample Lab AnalysisThis subcontract involves providing specialized laboratory testing services for chiller oil samples at California Department of Veterans Affairs facilities located in Fresno, California. The selected provider will be responsible for analyzing samples for acidity, wear metals, and other contaminants utilizing chemical analysis equipment or spectrometry. To qualify for this engagement, the service provider must be an accredited testing laboratory. The primary deliverable consists of comprehensive yearly lab analysis reports for each chiller to ensure optimal equipment performance and maintenance for the prime contractors.

California Department of Veterans Affairs

POSTED

about 15 hours ago

DEADLINE

Evaporator Tube Cleaning and Eddy Current TestingThis subcontract involves providing specialized evaporator tube cleaning and non-destructive testing services for prime contractors working on California Department of Veterans Affairs facility projects in Fresno, California. The scope of work includes removing scaling from tubes and utilizing Eddy Current Testing with specialized probes and analysis software to identify corrosion, pitting, or wall thinning. The project requires the use of NDT certified technicians to ensure technical accuracy and the delivery of detailed Eddy Current Testing reports. This opportunity is categorized under NAICS code 541380 and is associated with a response deadline of November 4, 2026.

California Department of Veterans Affairs

POSTED

about 15 hours ago

DEADLINE

Testing and Inspection ServicesThis subcontract for Testing and Inspection Services involves providing independent material testing and inspection for prime contractors on Texas Government construction projects within Tom Green County. The scope of work focuses on laboratory testing of building sealants and the nondestructive testing of various components to ensure structural integrity and quality control. All services must be performed in strict accordance with ASTM C 1021, ASTM E 329, ASTM E 543, and ASTM E 548 standards. The selected provider is responsible for delivering formal certified test reports and inspection certifications. The solicitation was posted on October 20, 2026, with a response deadline of December 9, 2026.

Tom Green County

POSTED

about 16 hours ago

DEADLINE

in about 2 months

Environmental Analytical Laboratory ServicesThis subcontract for Environmental Analytical Laboratory Services supports prime contractors on California Department of Transportation District 07 projects located in Los Angeles. The selected provider will perform chemical analyses and profiling of hazardous waste through both onsite and offsite laboratory testing in strict accordance with CCR Title 22 regulations. To qualify, the contractor must hold certifications from the CalEPA Environmental Laboratory Accreditation Program, the Department of Toxic Substances Control for hazardous waste analysis, and the State Water Resources Control Board. The primary deliverables for this engagement include the provision of certified waste profiles and comprehensive laboratory analysis reports.

California Department of Transportation

POSTED

about 18 hours ago

DEADLINE

Oil, Fuel, and Coolant Analysis LaboratoryThis subcontract for the California Department of Transportation involves providing specialized laboratory testing and analysis of oil, fuel, and coolant samples for prime contractors working on Caltrans facility projects. The selected provider will utilize spectrometry to identify wear metals, contaminants, and general degradation within fluid samples to ensure equipment health and operational efficiency. The scope of work requires the delivery of formal written analysis reports to the Contract Manager within 30 days of sample collection. Performance for this contract is centered in San Bernardino, with a response deadline for the solicitation set for November 6, 2026.

California Department of Transportation

POSTED

about 19 hours ago

DEADLINE

Ballistic Production Control Testing (PCT) ServicesThis subcontract opportunity is for Ballistic Production Control Testing (PCT) Services supporting the DLA Weapons Support Land Supply Chain within the Department of Defense. The selected provider will perform ballistic testing for prime contractors on DLA and Army projects, specifically conducting Production Control Testing and Ballistic Coupon Testing. All work must be executed in accordance with ATPD 2352 utilizing precision impact analysis tools and high-velocity projectile firing equipment to deliver final Ballistic PCT Test Reports and Certifications. The contract is designated as a Total Small Business Set-Aside under NAICS code 541380. Due to the nature of the work and the requirement to handle classified drawings, the contractor must possess a facility clearance and meet CMMC Level 2 compliance standards. Interested parties must submit their responses by November 18, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 21 hours ago

DEADLINE

Laboratory Oil AnalysisThis subcontract for Laboratory Oil Analysis supports prime contractors working on Central Ohio Transit Authority facility projects, specifically for the McKinley Facility. The selected provider will be responsible for analyzing generator lubrication oil samples to detect engine wear, degradation, and contaminants using specialized laboratory equipment. To ensure quality and accuracy, the contractor must hold industry-standard oil analysis certifications and provide comprehensive reports based on their findings. The opportunity is categorized under NAICS code 541380 and was posted on October 20, 2026. Interested parties must submit their responses by the deadline of November 10, 2026. This engagement focuses on maintaining critical infrastructure through precise technical analysis and reporting.

6301- Operations- McKinley Facility

POSTED

about 22 hours ago

DEADLINE

Soil and Compaction TestingThis subcontract opportunity involves providing professional soil and compaction inspection and testing services for the Government of Ontario Ministry of Environment, Conservation and Parks. The selected provider will support prime contractors on facility projects, specifically focusing on road and parking upgrades. Key responsibilities include conducting field testing of soil compaction and inspecting sub-grade materials utilizing nuclear densitometers. All resulting soil and compaction test reports must be certified by a Professional Engineer. The solicitation was posted on October 20, 2026, with a response deadline of November 20, 2026. This project falls under NAICS code 541380 and is managed by the Ministry of Environment, Conservation and Parks.

Environment, Conservation and Parks

POSTED

about 23 hours ago

DEADLINE

in about 1 month

Environmental Laboratory ServicesThis subcontract for Environmental Laboratory Services supports prime contractors working on projects for the Confederated Tribes of the Colville Reservation. The primary scope of work involves performing laboratory analysis on groundwater samples collected from the Nespelem Post and Pole site, which includes comprehensive data verification and validation processes. To ensure compliance, the service provider must maintain laboratory certification for all specific analytes required by the Quality Assurance Project Plan. The selected contractor is responsible for delivering all analytical reports and laboratory data in an electronic format. This opportunity is categorized under NAICS code 541380 and is centered in Nespelem, Washington. Interested parties should note the response deadline of November 5, 2026.

Confederated Tribes of the Colville Reservation

POSTED

about 23 hours ago

DEADLINE

SCBA System Installation and Air Quality Certification SpecialistThis subcontract opportunity is for an SCBA System Installation and Air Quality Certification Specialist to support prime contractors on fire department projects for the Wilcox County Board of Commissioners in Georgia. The selected specialist will be responsible for the physical installation of systems, performing comprehensive leak testing, and conducting system startups and operational demonstrations. A critical component of the scope involves using specialized equipment to perform air quality sampling to ensure compliance with Grade E breathing air standards. The final deliverables for this engagement include a fully leak-tested system and a formal Air Quality Certification report. Interested parties must respond by November 19, 2026.

Wilcox County Board of Commissioners

POSTED

about 23 hours ago

DEADLINE

More opportunities from Department Of Homeland Security → CG-SEA-C21

Same awarding agency

Industrial Tenting & Protective WrappingThis subcontract opportunity, titled Industrial Tenting and Protective Wrapping, is issued by the Department of Homeland Security under agency CG-SEA-C21. The project focuses on providing environmental containment and equipment protection for prime contractors working on USCG vessel projects in Jacksonville, Florida. Key deliverables include the installation of containment tents for blast and paint operations, as well as the shrink-wrapping of buoy and cargo handling cranes and boat davit winches. The contract is designated as a Total Small Business Set Aside under NAICS code 238990. Interested parties must submit their responses by the deadline of November 9, 2026, at 4:00 PM. The scope of work ensures that critical vessel equipment remains protected and that hazardous operations are properly contained during the maintenance process.

All Other Specialty Trade Contractors

POSTED

DEADLINE

Marine Equipment Maintenance (Spud Winches)This subcontract opportunity, managed by the Department of Homeland Security under agency CG-SEA-C21, involves the inspection, servicing, and renewal of spud winches for prime contractors working on USCG vessel projects. The scope of work includes performing detailed inspections and maintenance on barge spud winches, executing full system renewals when necessary, and delivering the completed winch systems. The project is designated as a total Small Business Set Aside under NAICS code 811310, with the place of performance located in Jacksonville, Florida. Interested parties must submit their responses by the deadline of November 9, 2026, following the posting date of October 20, 2026.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

DEADLINE

Environmental Remediation (Lead & Asbestos)This subcontract opportunity, managed by the Department of Homeland Security under agency CG-SEA-C21, involves providing environmental remediation services for USCG vessel projects in Jacksonville, Florida. The selected contractor will perform spot abatement of hazardous materials, specifically focusing on the removal and disposal of asbestos-containing materials and lead-based paint. To be eligible, contractors must possess the necessary certifications for handling and disposing of hazardous materials and are responsible for delivering a clean site along with final abatement certification. The project is designated as a total Small Business Set Aside under NAICS code 562910. Interested parties must submit their responses by November 9, 2026, at 4:00 PM. This role functions as a subcontractor supporting prime contractors to ensure all hazardous materials are mitigated according to safety and environmental standards.

Remediation Services

POSTED

DEADLINE

Marine Door Fabrication & InstallationThis subcontract opportunity involves the fabrication and installation of vessel doors for prime contractors working on USCG projects under the Department of Homeland Security. The scope of work includes the replacement of Fiddley, Passageway, and Galley doors, as well as the reinstallation of Crew Head doors, with the final requirement being the delivery of fully functional, watertight installations. The project is designated as a total Small Business Set Aside under NAICS code 332322 and will be performed in Jacksonville, Florida. Interested parties must submit their responses by November 9, 2026, for this requirement managed by the CG-SEA-C21 agency.

Sheet Metal Work Manufacturing

POSTED

DEADLINE

Marine Piping & Mechanical SystemsThis subcontract opportunity, titled Marine Piping and Mechanical Systems, involves the renewal and repair of engine coolant and exhaust piping systems for prime contractors on USCG vessel projects. The scope of work specifically includes renewing Detroit Diesel Model 3-71 engine cooling piping and barge engine exhaust piping, as well as overhauling sea valves and water pieces using marine-grade piping and gaskets to ensure fully functional systems. Managed by the Department of Homeland Security under agency CG-SEA-C21, the project will be performed in Jacksonville, Florida. This is a total Small Business Set Aside under NAICS code 238220. The solicitation was posted on October 20, 2026, with a response deadline of November 9, 2026.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

Marine Steel Fabrication & Structural RepairThis small business set-aside subcontract, managed by the Department of Homeland Security for the CG-SEA-C21 agency, involves marine steel fabrication and structural repair for USCG vessel projects in Jacksonville. The scope of work focuses on the removal and renewal of damaged hull and structural steel plating, specifically utilizing plates weighing 10.2 lbs, 12.75 lbs, and 15.3 lbs. Additionally, the contractor is responsible for repairing bulwarks and pusher knees, ensuring all welding and brazing activities comply with SFLC Std Spec 0740. To ensure quality and safety, all personnel performing welding must be certified according to SFLC Std Spec 0740 and NAVSEA TP 1688 standards. The final deliverable consists of fully installed and welded steel plating. Interested parties must submit their responses by November 9, 2026, under NAICS code 336612.

POSTED

DEADLINE

Marine Preservation & Industrial CoatingThis small business set-aside subcontract, managed by the Department of Homeland Security under agency CG-SEA-C21, involves providing marine preservation and industrial coating services for USCG vessel projects in Jacksonville, Florida. The scope of work includes surface preparation and the application of protective coatings, specifically executing full or partial preservation of hull plating. Technical requirements include power tool cleaning to bare metal according to SSPC-SP11 standards and the application of marine-grade primers, topcoats, and ASTM D1330 rubber sheet gaskets. To ensure quality control, the contractor must utilize QP-1/AMPP certified inspectors and provide completed QA-5 data forms upon delivery of the preserved hull surfaces. Interested parties must respond by November 9, 2026, for this project categorized under NAICS code 238320.

Painting and Wall Covering Contractors

POSTED

DEADLINE

Hull Ultrasonic Testing & Side Scan InspectionThis small business set-aside subcontract, managed by the Department of Homeland Security under agency CG-SEA-C21, involves performing specialized thickness measurements of underwater hull plating for USCG vessel projects in Jacksonville. The contractor will utilize ultrasonic side scan equipment with a 0.5 inch by 0.5 inch resolution to automate the scanning process and accurately identify areas of pitting and wastage. Key deliverables include the provision of detailed thickness measurement reports and highlighted maps indicating specific repair areas. To ensure quality control and transparency, the contractor is required to provide daily updates to the Contracting Officer's Representative and conduct onsite reviews of all readings.

Testing Laboratories and Services

POSTED

DEADLINE

Heavy Equipment Core Return Logistics (Newport, RI)This subcontract opportunity, managed by the Department of Homeland Security for the US Coast Guard, involves specialized transport and freight coordination for heavy engine core components in Newport, Rhode Island. The selected contractor will be responsible for coordinating the pickup and hauling of critical parts, such as crankshafts and water pumps, from the pier to a designated vendor facility for inspection. To qualify, providers must possess freight vehicles capable of transporting heavy equipment and maintain the necessary port security access. This is a total small business set-aside under NAICS code 484220, with a response deadline of October 28, 2026.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

OEM Caterpillar D-398 Engine Overhaul Kit SupplierThis subcontract opportunity is for the procurement and delivery of brand-new OEM overhaul kits for Caterpillar D-398 engines, supporting prime contractors on US Coast Guard vessel projects. The scope of work includes the sourcing and kitting of essential OEM components such as crankshafts, water pumps, gaskets, lock brackets, primers, bolts, and cap screws. All materials must be delivered as a complete, verified kit to Newport, Rhode Island. To be eligible for this award, suppliers must maintain active status as a Caterpillar Authorized Parts and Service Center and provide a valid Letter of Authorization. This is a total small business set-aside under NAICS code 423840, managed by the Department of Homeland Security for agency CG-SEA-C21. Responses are due by October 28, 2026.

Industrial Supplies Merchant Wholesalers

POSTED

DEADLINE

CGC MANTA – FUEL TANK CLEANING

Solicitation # 52000QR270000177

All Other Miscellaneous Waste Management Services

POSTED

DEADLINE

USCGC HAMMER (WLIC 75302) USCG 68A BARGE (68014) DRYDOCK REPAIRS FY2027

Solicitation # 70ZU0127QPBPL0001

Solicitation 70ZU0127QPBPL0001 is a Request for Quotations issued by the Department of Homeland Security, Coast Guard, for the Fiscal Year 2027 drydock repairs of the USCGC HAMMER (WLIC 75302) and the USCG 68A Barge (68014). This is a Total Small Business Set-Aside under a Firm Fixed Price contract with a proposed period of performance from January 6, 2027, to March 17, 2027, contingent upon Congressional Appropriation. The contractor must provide a facility accessible from a navigable waterway in Jacksonville, Florida, capable of supporting the safe arrival and departure of the vessels. The scope of work encompasses comprehensive maintenance, preservation, and repair services, including hull plating renewal, ultrasonic side scan testing, propulsion shafting overhaul, tank preservation, and the renewal of sea valves and strainers. Specific requirements include the provision of an independent Level 3 NACE Inspector and adherence to SFLC Standard Specifications for welding, drydocking, and preservation. Award will be based on the most advantageous offer, evaluating technical capability, project planning, experience with DoD and USCG surface vessels, and price. Quotations are due by November 9, 2026, and must include a cover letter, price schedule, and documentation of past performance and technical capability.

Ship Building and Repairing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS