Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

Specialized Packaging and Preservation Services

Active
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires specialized packaging, preservation at Level A, and proper marking of cylinder assemblies in strict compliance with MIL-STD-2073-1E and SPI AK12079240 Revision F, ensuring military-grade standards for durability, environmental protection, and traceability. The work must meet rigorous国防要求 for handling, storage, and transportation of sensitive equipment, with all procedures fully documented to maintain accountability and readiness. This is a subcontract under the Department of Defense, managed by DLA Land Warren, with a response deadline of September 15, 2026, and a NAICS code of 423840 indicating warehousing and storage services. The performance location and point of contact details are not specified, but compliance with the referenced military standards is mandatory. The solicitation was posted on July 31, 2026, and all proposers must demonstrate proven capability in military-compliant packaging systems to be considered eligible.

General Info

Specialized military packaging per MIL-STD-2073-1E and SPI AK12079240 Rev F for DLA Land Warren, due Sept 15, 2026.

Agency

Department Of Defense → DLA Land WarrenView Agency

NAICS

423840 - Industrial Supplies Merchant WholesalersView NAICS

Place of Performance

MI

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

Posted

subcontract

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DLA Land Warren
ContactsNo contacts available
OfficeN/A
Organization / Agency
Department Of Defense → DLA Land Warren
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Provide military-compliant packaging, preservation (Level A), and marking for cylinder assemblies per MIL-STD-2073-1E and SPI AK12079240, Revision F.

Similar Contracts

Same NAICS industry code

NAICS: 423840
New
International
Supply and Deliver an Asphalt Planer Attachment
Solicitation # RFQ26-0416
The City of Saskatoon is seeking to procure one asphalt planer attachment designed for use with a skid steer, issued under solicitation number RFQ26-0416. Interested parties must register on the City’s electronic bidding platform at saskatoon.bidsandtenders.ca to access the full solicitation documents, submit bids, receive updates including addenda, and stay informed via email notifications. All submissions must be made through this system, and award notifications will be posted publicly on the same portal. The bid submission deadline is 2:00:59 p.m. Saskatchewan Time on Monday, August 17, 2026, with no extensions permitted. The procurement is administered by the Saskatchewan Public Sector under the City of Saskatoon, with Corey Szautner listed as the primary point of contact for inquiries. Performance of the contract will occur within Saskatchewan, and no specific set-aside or NAICS code has been designated for this solicitation.
City of Saskatoon

POSTED

about 19 hours ago

DEADLINE

in 16 days
View Details
NAICS: 423840
New
SLED
Miscellaneous Industrial Items
Solicitation # DFW19788
The Dallas-Fort Worth International Airport Board is soliciting quotes for miscellaneous industrial items as outlined in the attached specifications, with all submissions required through the online portal dfwairport.bonfirehub.com; quotes sent via mail or email will not be accepted. The deadline for submission is 2:00 pm Central Time on August 7, 2026, and pricing must include delivery F.O.B. to the designated location at 3122 East 30th Street, DFW Airport, Texas 75261. The Airport Board is tax-exempt, and all costs quoted should reflect this status. The solicitation, identified as DFW19788, was posted on July 31, 2026, and is managed by Monica Henry, the primary point of contact, reachable at mhenry@dfwairport.com. Only responses submitted through the designated platform by the specified deadline will be considered for award.
Dfw International Airport

POSTED

about 22 hours ago

DEADLINE

in 6 days
View Details
NAICS: 423840
New
SLED
Walk Behind Concrete Saw
Solicitation # 645-DOTRFB-2955-2027
The Iowa Department of Transportation is soliciting competitive bids for walk-behind concrete saws that meet its technical specifications, with submissions due by August 21, 2026 at 1:00 p.m. CT. Bids must comply with Iowa Administrative Code 761-20, and any deviations from the requirements must be submitted via the Pre-bid Request for Substitutions form. While specific brands are referenced to define performance standards, manufacturers are encouraged to propose comparable alternatives with equal or superior performance, including full specifications for comparison. The contract is expected to be awarded to the most advantageous bidder based on cost and additional factors such as compliance with mandatory criteria, proposed staffing, schedule adherence, past performance, and work capacity. The award will result in a one-year contract with an option to extend for up to five additional years in annual increments, though no minimum purchase quantities are guaranteed and orders will be issued as needed based on funding and project demands. All deliveries must be F.O.B. Destination to the Iowa DOT’s Ames facility, and the agency is tax exempt, with certificates available upon request. Communication regarding the bid must be directed solely to Purchasing Agent Reese Polich until award, with all questions submitted through the Q&A Board before the deadline. The bid opening will be held publicly via Microsoft Teams, and a Notification of Intent to Award will be posted on the IMPACS Business Opportunities site after evaluation.
Iowa

POSTED

about 24 hours ago

DEADLINE

in 20 days
View Details
NAICS: 423840
New
SLED
Consumables & Spare Parts SupplyThe contract covers the supply of essential consumables and spare parts required for the ongoing operation and maintenance of a reverse osmosis system, including replacement filters, membranes, seals, O-rings, and specialized cleaning chemicals for both routine upkeep and urgent remedial needs. These items are critical to ensuring the system’s reliability, efficiency, and compliance with operational standards, with delivery expected to support uninterrupted service across all designated facilities. This subcontract, posted on July 31, 2026, has a response deadline of September 4, 2026, and is classified under NAICS code 423840, indicating it pertains to wholesale trade of plumbing and heating equipment and supplies. The contracting entity is the Sheriff-Coroner agency in California, with no specific place of performance or point of contact detailed. Bidders must be prepared to meet strict quality and delivery requirements to support emergency and scheduled maintenance timelines, with all supplies intended for direct use within the agency’s water treatment infrastructure.
Sheriff-Coroner

POSTED

1 day ago

DEADLINE

in about 1 month
View Details
NAICS: 423840
New
SLED
Air Filters - ALL
Solicitation # 1-2627
Spokane Public Schools is soliciting bids for a comprehensive range of air filter items under solicitation number 1-2627, with award to be made on an all or none basis, meaning vendors must quote on the entire listing to be considered. The solicitation, posted on July 31, 2026, requires responses by August 21, 2026, at 6:00 PM, and includes specific delivery requirements outlined in the accompanying documents, along with an Excel file detailing the item list and a defined delivery schedule that must be strictly followed. All performance is to occur within Washington State, and the procurement is being managed by the Spokane Public Schools district under the SLED category, with Sharon Thomas serving as the primary point of contact for inquiries. Bidders must review all solicitation materials thoroughly to ensure full compliance with technical specifications, delivery timelines, and submission guidelines, as partial bids will not be accepted.
Spokane Public Schools

POSTED

1 day ago

DEADLINE

in 20 days
View Details
NAICS: 423840
New
Federal
Domestic and Foreign Manufacturer Disclosure & ComplianceThis contract requires full transparency across the supply chain by mandating the disclosure of manufacturer names, locations, business size classifications, and countries of origin for all supplied goods. Justification must be provided for any foreign-sourced components in accordance with federal security regulations, ensuring compliance with domestic sourcing priorities and national security requirements. The obligation applies to all tiers of subcontractors and extends to verifying that every entity involved meets the specified reporting standards. The solicitation is designated as a Small Business Set Aside under NAICS code 423840, exclusively open to small businesses, and is issued by DLA Maritime - Portsmouth under the Department of Defense. Proposals must be submitted by August 11, 2026, with performance expected to take place in Kittery, ZIP code 03904. Compliance with these requirements is essential to qualify for award, and failure to provide complete and accurate manufacturer disclosures may result in disqualification or contract termination.
DLA Maritime - Portsmouth

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 423840
New
SLED
Litter Removal Equipment and Supply ProvisionThe contract pertains to the supply of litter collection tools and safety equipment required for ongoing cleanup operations, including grabbers, bags, gloves, high-visibility vests, traffic cones, and signage. The equipment is intended to support recurring environmental maintenance efforts, ensuring safe and efficient litter removal in public areas. The procurement is structured as a subcontract under NAICS code 423840, which classifies it within the miscellaneous durable goods merchant wholesalers sector. The opportunity was posted on July 30, 2026, with a response deadline of August 13, 2026, and the place of performance is designated as Park Plaza in Boston, Massachusetts, with a zip code of 02116. The contracting entity is identified as 0H100 - HIGHWAY under the Massachusetts agency, indicating this is part of a state transportation or infrastructure initiative. All equipment must meet operational standards to support consistent and safe usage by personnel conducting cleanup activities in high-traffic urban environments.
0H100 - HIGHWAY

POSTED

2 days ago

DEADLINE

in 12 days
View Details
NAICS: 423840
New
SLED
Tools and Hardware SupplyThe City of Huntsville is seeking a subcontractor to supply a broad range of tools and hardware, including hand tools, power tools, fasteners, anchors, and general hardware items required for daily operations across various city departments. The solicitation is posted under NAICS code 423840, which classifies the procurement as wholesale trade of hardware and plumbing and heating equipment, indicating the expected scope involves bulk distribution of industrial-grade materials. The contract opportunity was posted on July 30, 2026, with a response deadline of August 20, 2026, and is accessible through the Texas SmartBuy portal, suggesting the procurement process is managed through a state-level electronic procurement system. Although the agency name references Texas, the contracting entity is the City of Huntsville, which may indicate a cross-state procurement arrangement or an administrative misalignment in the metadata. There is no set-aside designation specified, meaning the contract is open to all qualified vendors without preference for small, minority, or women-owned businesses. Performance location and point of contact details are not provided in the data, so successful vendors will need to coordinate directly with the city for delivery logistics and compliance requirements.
CITY OF HUNTSVILLE

POSTED

2 days ago

DEADLINE

in 19 days
View Details
NAICS: 423840
New
SLED
Bid NO. 26-31 MRO Supplies
Solicitation # NO.26-31
The City of Huntsville, Texas, is soliciting bids for MRO Supplies under Solicitation Number NO.26-31, with a submission deadline of August 20, 2026. The contract, estimated at $1,000,000 for the base year, includes four one-year renewal options extending through September 30, 2031, and is structured as a fixed-price arrangement where vendors must quote percentage discounts off their catalog or shelf prices. All deliveries must be made FOB destination to the Huntsville Service Center at 450 Highway 75 N., with freight prepaid and included in the bid price. Vendors are required to submit a completed price chart, Certificate of Liability Insurance listing the City as Additional Insured with specific coverage limits, a Conflict of Interest Questionnaire, and Form 1295 – Certificate of Interested Parties. The City will evaluate proposals based on best value, prioritizing cost competitiveness, local presence in Huntsville, product durability, delivery reliability, and vendor performance. Participation requires compliance with stringent state laws including Texas prohibitions on doing business with designated terrorist organizations and boycotts of Israel, along with strict non-discrimination and indemnification clauses. Contractors must maintain commercial general liability, auto liability, professional liability, and workers’ compensation insurance, all with blanket additional insured and waiver of subrogation endorsements. The City reserves the right to adjust quantities without changing unit prices, and contract award is contingent upon City Council approval and available funding. Proposals must be submitted physically in a sealed envelope marked with the bid number and delivered to City Hall by the deadline, with electronic submissions only permitted for inquiries and responses to addenda. All contractual terms are governed by the Uniform Commercial Code and Texas Government Code, and vendors must comply with tax exemption requirements, public disclosure laws, and warranty standards. No CLINs or detailed line-item pricing is provided, and the City does not require UEI, CAGE codes, or socioeconomic certifications.
CITY OF HUNTSVILLE

POSTED

2 days ago

DEADLINE

in 19 days
View Details
NAICS: 423840
New
DIBBS
Military-Compliant Packaging and MarkingThe contract requires compliance with MIL-STD-129, ASTM D3951, and the DLA Master List for the packaging and marking of delivered items, ensuring all defense logistics standards are met for military supply chain operations. Work must be performed at Cherry Point, North Carolina, with strict adherence to government-mandated labeling, identification, and packaging protocols to support readiness and traceability across Department of Defense systems. The solicitation is structured as a subcontract under NAICS code 423840, indicating a focus on wholesale trade of hardware, plumbing, and heating equipment, and is managed by the DLA Fleet Readiness Center under the Department of Defense. All proposals must be submitted by August 7, 2026, with no set-aside designation specified, leaving the opportunity open to eligible contractors without restrictions based on business size or category.
DLA FLEET READINESS CENTER DLA PSC

POSTED

2 days ago

DEADLINE

in 6 days
View Details
NAICS: 423840
New
DIBBS
Military-Compliant Packaging & PalletizationThe contract requires the provision of packaging, preservation, and palletization services for filter elements in strict accordance with MIL-STD-2073-1E standards, ensuring full military compliance for shipment to DLA Distribution in New Cumberland, Pennsylvania. All procedures must meet the rigorous requirements for protecting sensitive defense components during storage and transit, including proper material selection, environmental preservation techniques, and secure stacking and load configuration on pallets. The work is classified as a subcontract under NAICS code 423840, indicating it falls within the wholesale trade of miscellaneous durable goods, and is managed by the Department of Defense’s Land Supply Chain. The solicitation was posted on July 30, 2026, with a response deadline set for August 10, 2026. Performance will be executed at the specified delivery location in New Cumberland, with a ZIP code of 17070-5002, though no additional organizational contact information is provided. Bidders must be prepared to demonstrate full adherence to federal military packaging specifications and demonstrate capability to handle logistics for high-value defense-related items. Participation requires timely submission of proposals through the DIBBS platform, accessible via the provided link, and successful contractors will be expected to maintain consistent quality and compliance throughout the contract lifecycle.
LAND SUPPLY CHAIN

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 423840
New
DIBBS
Military-Compliant Packaging and Preservation ServicesThe contract requires comprehensive packaging, preservation, and labeling services for marine windows in full compliance with MIL-STD-2073-1E and DLA RP001 standards, ensuring long-term protection against environmental degradation during storage and transport. Specific preservation techniques must be applied to prevent corrosion, moisture damage, and physical impairment, with all items properly marked according to MIL-STD-129 to support accurate identification and logistics tracking within military supply chains. The work must be performed to stringent defense specifications, with attention to detail in material selection, seal integrity, and labeling accuracy to meet operational readiness requirements. The solicitation is classified as a subcontract under NAICS code 423840 and is managed by the Electrical Devices Division of the Department of Defense, with performance obligations centered in Virginia Beach, Virginia, at the ZIP code 23459-3018. Responses must be submitted by August 10, 2026, with the opportunity posted on July 30, 2026. While no set-aside type is specified, bidders are expected to demonstrate proven capability in military-grade packaging and preservation, particularly for sensitive marine hardware, through documented experience and adherence to federal defense standards. All activities must align with DLA’s procedural and quality assurance protocols as outlined in referenced directives.
ELECTRICAL DEVICES DIV

POSTED

2 days ago

DEADLINE

in 9 days
View Details

More opportunities from Department Of Defense → DLA Land Warren

Same awarding agency

NAICS: 561400
New
Federal
Electronic Invoicing and WAWF ServicesThe contract requires the submission of electronic invoices and receiving reports through the WAWF system, encompassing all associated documentation such as cost vouchers and progress payments as needed. This subcontract falls under NAICS code 561400 and is issued by the DLA Land Warren under the Department of Defense, with a posted date of July 31, 2026, and a response deadline of September 15, 2026. Performance obligations are tied to the electronic processing and timely delivery of financial and logistical records via the designated government system, ensuring full compliance with defense procurement documentation standards. The place of performance and point of contact details are not specified, and no set-aside classification is assigned.

POSTED

1 day ago

DEADLINE

in about 2 months
View Details
NAICS: 484220
New
Federal
Domestic and Overseas Transportation ServicesThe contract requires the transportation of cylinder assemblies from the manufacturer to DLA Distribution in New Cumberland, Pennsylvania, under FOB Destination terms, meaning the vendor assumes responsibility for all shipping costs and risks until delivery is completed at the destination. The scope may expand to include international shipments by sea, as permitted by DFARS clause provisions, allowing for potential global logistics operations beyond domestic delivery. The work is classified under NAICS code 484220 for freight transportation arrangement and is structured as a subcontract under the Department of Defense, specifically managed by DLA Land Warren. The solicitation was posted on July 31, 2026, with responses due by September 15, 2026, at 7:00 p.m. Eastern Time. While specific details about the point of contact, office address, or place of performance are not provided, the contract is accessible through the SAM.gov portal. Contractors must be prepared to handle both domestic and potential overseas freight logistics, comply with defense regulations, and ensure timely, secure delivery of sensitive cylinder assemblies without additional cost to the government upon arrival at the final destination.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

1 day ago

DEADLINE

in about 2 months
View Details
NAICS: 333999
New
Federal
Cylinder Assembly Manufacturing and SupplyThe contract requires the manufacture and supply of 48 cylinder assemblies designated by NSN 3040-01-207-9240 and manufacturer part number 6-372-002270, with an option to procure an additional 48 units if needed. All units must be produced and delivered in full compliance with military packaging, marking, and preservation standards to ensure operational readiness and long-term storage integrity. The solicitation is open for subcontractors under the NAICS code 333999, and responses are due by September 15, 2026, with the contract managed by the Department of Defense through DLA Land Warren. The work is expected to be performed in accordance with federal procurement requirements, though specific performance location and point of contact details are not provided.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

1 day ago

DEADLINE

in about 2 months
View Details
NAICS: 336390
New
Federal
WHEEL, SOLID RUBBER TIRE
Solicitation # SPRDL1-26-R-0069
This solicitation, numbered SPRDL1-26-R-0069, is a full and open competition issued by the Department of Defense through DLA Land Warren for the procurement of 7,112 solid rubber wheels, identified by NSN 2530-00-701-3976 and manufacturer part number 7013976, under a firm-fixed-price contract. The total quantity includes a base requirement of 3,556 units and an option for an additional 3,556 units, to be priced separately. The requirement is part of a Qualified Product List (QPL) and must comply with the Technical Data Package (TDP), including all drawings and specifications, with technical requirements on ordnance drawings taking precedence over manufacturer part numbers. Delivery is specified under FOB Origin terms, and all items must be packaged in accordance with Military Level A packaging and MIL-STD-2073-1, with special packaging instruction AK07013976, revision R, dated August 25, 2025. Marking must follow MIL-STD-129, Revision R, including barcoding and Military Shipment Labels, and Unique Item Identification (UII) must be applied per MIL-STD-130 with machine-readable formats. Passive RFID tagging, wood packaging compliance with ISPM 15 and ALSC-approved marks, and adherence to IATA, IMDG, and CFR Title 29, 40, and 49 for hazardous materials are mandatory. A First Article Test is required in accordance with MIL-DTL-3100 and FAR 52.209-3, and contractors may request a waiver, which if granted, requires an accelerated delivery schedule. The Government reserves the right to waive the first article test, and any waiver request must include the associated pricing. Evaluation is based on the lowest offer if award is price-driven, with option prices evaluated at the higher of the basic quantity unit price or the highest unit price in the option range. Payment will be processed electronically through WAWF, requiring contractor registration in SAM.gov and compliance with electronic invoicing protocols. Contractors must be registered in the DLA reverse auction system and have completed required online training if a reverse auction is triggered. Access to the TDP is restricted to entities certified under the U.S./Canada Joint Certification Program, with only the designated Data Custodian permitted to download
Other Motor Vehicle Parts Manufacturing

POSTED

1 day ago

DEADLINE

in 20 days
View Details
NAICS: 333995
New
Federal
Cylinder, Hydraulic, Actuating
Solicitation # SPRDL1-26-R-0104
The contract pertains to the procurement of hydraulic actuating cylinder assemblies, identified by NSN 3040-01-207-9240 and part number 6-372-002270, produced by CAGE code 12361. The base requirement is for 48 units with an optional follow-on quantity of up to another 48 units, resulting in a potential total of 96 units under a firm fixed price contract with a one-year base period and a 100% option period. The cylinders are critical components of the rotating telescoping-boom crane mounted on the HEMTT M984 Tow Truck, specifically responsible for raising and lowering the upper arm of the crane. Preservation and packaging must adhere to MIL standards and Packaging Instruction AK12079240 Rev F dated May 5, 2026, with delivery terms FOB destination and inspection performed at origin. Technical data is not provided, and all items must meet origin inspection and acceptance criteria. The solicitation, identified as SPRDL1-26-R-0104, is set to be posted on SAM.gov on or around July 13, 2026, with responses due by July 28, 2026. The procurement allows for a reverse auction as a pricing mechanism; if utilized, bidders must be registered in the DLA reverse auction system and complete mandatory online training prior to participation. The contracting office is the DLA Land Warren in Warren, Michigan, and inquiries should be directed to Stephen Granch. There is no set-aside designation, making this a full and open competition under NAICS code 333995.
Fluid Power Cylinder and Actuator Manufacturing

POSTED

1 day ago

DEADLINE

in about 2 months
View Details
NAICS: 334511
New
Federal
Supply of Test Device, Interface (NSN: 7035016126074, Part Number: BI-411-00)The contract requires the procurement and delivery of three specialized military test interface devices designated for use in the Abrams tank program, identified by NSN 7035016126074 and Part Number BI-411-00. The supplier must possess authorized distribution or manufacturing rights to ensure compliance with intellectual property and defense production protocols. All units must meet stringent military logistics standards, including documentation, traceability, and quality assurance, to align with Department of Defense operational requirements. The device is critical for diagnostic and maintenance functions within the Abrams platform and must be delivered to designated defense logistics facilities without deviation from technical specifications. The solicitation is classified as a subcontract under NAICS code 334511, which pertains to the manufacturing of electronic components and equipment. The posting date is set for July 30, 2026, with a response deadline of September 30, 2026, indicating a two-month window for qualified vendors to submit proposals. The contracting agency is DLA Land Warren under the Department of Defense, and while specific performance location details are not provided, delivery must accommodate federal military supply chain protocols. There is no set-aside designation, meaning competition is open to all eligible entities, but only those with verified defense manufacturing credentials and the ability to meet security and compliance obligations will be considered viable.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

2 days ago

DEADLINE

in 2 months
View Details
NAICS: 333995
New
Federal
CYLINDER ASSEMBLY
Solicitation # SPRDL1-26-R-0142
The U.S. Department of Defense, through DLA Land Warren, has issued a pre-solicitation notice for a Firm-Fixed-Price procurement of Cylinder Assemblies, identified by NSN 3040-00-678-7076 and part number TDP 8743887, with a basic quantity of 166 units and an optional additional quantity of up to 166 units. The requirement is set aside entirely for small business concerns and will be administered under NAICS code 333995, with delivery specified at destination under MIL B packaging standards. The solicitation is anticipated to be posted on SAM.gov on or about August 5, 2026, with responses due by August 4, 2026, and includes a provision for a possible reverse auction to determine pricing, which requires contractors to be registered in the designated system and to have completed mandatory online training prior to participation. Access to the Technical Data Package, which is classified as competitive and subject to export control, is strictly limited to certified entities under the United States/Canada Joint Certification Program. Only the designated Data Custodian from a certified firm may request and download the TDP after the solicitation is published; no exceptions will be made. Firms not yet certified must submit DD Form 2345 with supporting documentation via mail to the JCP office, as electronic submission is not accepted, and allow approximately one week for processing. Registration for the reverse auction platform and access to SAM.gov are required for participation, and vendors are strongly encouraged to enroll early. Assistance for government contracting is available through the APEX Accelerator network, and all inquiries should be directed to the primary point of contact, Alexandra Stone, at the provided email and phone number.
Fluid Power Cylinder and Actuator Manufacturing

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 334112
New
Federal
TEST DEVICE,INTERFACE
Solicitation # SPRDL1-26-R-A006
The U.S. Department of Defense, through DLA Land Warren in Warren, Michigan, is seeking sources for the acquisition of the TEST DEVICE, INTERFACE with NSN 7035016126074 and part number BI-411-00, intended for use on the Abrams system. A basic quantity of three units is required, with all options set at 100 percent, and the procurement is targeted toward TERADYNE INC, identified by CAGE code 23350. This solicitation, issued under number SPRDL1-26-R-A006 and classified under NAICS code 334112, was posted on July 30, 2026, with responses due by September 30, 2026, at 8:30 PM Eastern Time. The solicitation is open-ended with no set-aside designation, and all inquiries or submissions should be directed to the primary point of contact, Muhammad Kah, reachable via email at Muhammad.kah@dla.mil or phone at 586-467-1203.
Computer Storage Device Manufacturing

POSTED

2 days ago

DEADLINE

in 2 months
View Details
NAICS: 561400
Federal
Electronic Invoicing via WAWFAll payment requests and receiving reports must be submitted electronically through the Wide Area WorkFlow system using either the IRR or cost voucher formats to comply with this subcontract under the Department of Defense. The contract is managed by DLA Land Warren and is tied to NAICS code 561400, indicating a focus on administrative management and general services. The solicitation was posted on July 24, 2026, with a firm deadline for responses on August 13, 2026, at 7:00 p.m. The performance location is designated as Warren, though no specific state or zip code is provided. There is no set-aside designation listed for this contract, and no point of contact information is available. All submissions must adhere strictly to the electronic process outlined, ensuring alignment with automated federal payment and documentation standards.

POSTED

8 days ago

DEADLINE

in 12 days
View Details
NAICS: 541330
Federal
RFID Tagging (If Applicable)The contract requires the application of passive RFID tags to items or containers when the DFARS clause 252.211-7006 is applicable, ensuring full compliance with Department of Defense tracking requirements and seamless integration into its authorized logistics systems. This obligation is tied to subcontract performance under the NAICS code 541330 and is managed by DLA Land Warren under the broader authority of the Department of Defense. The tagging must be executed in accordance with DoD standards to enable accurate, real-time visibility of assets throughout the supply chain. The solicitation has no specified response deadline beyond the posted date of July 24, 2026, with submissions required by August 13, 2026, and is intended for subcontractor participation. Performance location is designated as Warren, though no specific address or contact information is provided. The scope is conditional on the invocation of the DFARS clause, meaning tagging is only mandatory when triggered by contractual obligations tied to defense logistics. All tagging activities must align with DoD protocols to ensure operational readiness and accountability of tracked assets.
Engineering Services

POSTED

8 days ago

DEADLINE

in 12 days
View Details
NAICS: 493190
Federal
Packaging, Marking, and Hazardous Materials HandlingThe contract requires comprehensive packaging and marking of military shipments in strict compliance with MIL-STD-129 standards, ensuring all items are properly labeled for identification, handling, and tracking throughout the supply chain. It also mandates the secure handling and marking of sensitive materials, including the application of tamper-resistant and classified markings where applicable, to safeguard national security information and prevent unauthorized access. Contractors must possess the expertise to manage hazardous materials in accordance with international and federal regulations, including IATA for air transport, IMDG for maritime transport, and 49 CFR for domestic ground transportation, ensuring full compliance with safety, documentation, and emergency response protocols. The work is to be performed at the DLA Land Warren location in Warren, with a response deadline of August 13, 2026, and is classified as a subcontract under NAICS code 493190, indicating a focus on warehousing and storage services within the Department of Defense logistics framework.
Other Warehousing and Storage

POSTED

8 days ago

DEADLINE

in 12 days
View Details
NAICS: 811212
Federal
Bar-Coding and UID Marking ServicesThe contract requires the application of 2D barcodes with Unique Item Identifiers (UII) in full compliance with MIL-STD-130, using the ISO/IEC 15434 data structure formats to ensure machine readability and proper registration in the IUID Registry. All marking must meet stringent Department of Defense standards for traceability, durability, and legibility across a range of operating environments, with the goal of enabling accurate lifecycle tracking of equipment and components. The contractor is responsible for implementing precise marking processes that align with federal mandates without deviation, ensuring seamless integration into existing DoD logistics and inventory systems. This is a subcontract under the agency name DLA Land Warren, part of the Department of Defense, with a NAICS code of 811212 indicating specialized repair and maintenance services. The solicitation was posted on July 24, 2026, with a firm response deadline of August 13, 2026 at 7:00 PM. Performance is expected to take place in Warren, though specific location details beyond the city are not provided. The nature of the work demands strict adherence to technical specifications, thorough documentation, and verifiable compliance to avoid rejection or nonpayment, with no set-aside provisions listed, meaning the subcontract is open to all qualified applicants regardless of business size or status.
Computer and Office Machine Repair and Maintenance

POSTED

8 days ago

DEADLINE

in 12 days
View Details