This Government Contract opportunity from Department Of Defense was posted on September 1, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Specialized Tier-3 Technical Support and Engineering Integration

Closed

Federal

Submission Closed09/04/2026, 06:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 811210

New

SLED

Building Management System Maintenance, Repairs, and Services

Solicitation # 2027-RFP-00133

The County of San Mateo Department of Public Works is soliciting proposals under solicitation number 2027-RFP-00133 for a comprehensive maintenance, repair, and service contract for Building Management Systems (BMS) across various county facilities. The scope of work includes routine preventative maintenance, system upgrades, 24/7 technical support, and emergency repairs with a required two-hour response time. Key performance locations include the Regional Operations Center, County Office Buildings 1 through 3, and the Maple Street Correction Facility in Redwood City. The contract is intended for a single vendor for a term of up to five years, with a requirement for bi-monthly inspections of sensors, controllers, and actuators to ensure optimal system reliability and efficiency. Qualified proposers must demonstrate specific technical expertise, including technicians who are certified and trained in the Tridium Niagara BMS and hold active C-10/C-20 licenses. Additionally, vendors must provide proof of registration with the Department of Industrial Relations and adhere to prevailing wage requirements and industry standards such as ASHRAE, ISO, and ANSI. The selection process will be managed by a committee using a points-based scoring system. Proposals must be submitted electronically via the OpenGov eProcurement portal by November 4, 2026. Awarded contractors will be subject to standard county terms, including strict compliance with HIPAA, the Americans with Disabilities Act, and comprehensive insurance requirements for general liability, workers compensation, and professional errors and omissions.

Public Works - Facilities Services - FMO

POSTED

DEADLINE

Ball Valve Teardown, Evaluation, and Level 1 RepairThis subcontract with the Department of Defense for Navsup Weapon Systems Support Mech involves the teardown, evaluation, inspection, and full Level 1 repair of Ball Valve Parts Kits under NIIN 013385191. The scope of work requires executing repairs according to technical drawings, specifically including seat stack height measurements and necessary modifications to restore all components to like-new condition. To ensure quality and precision, the contractor must maintain ISO-9001 or MIL-I-45208 quality systems and adhere to ISO-10012 or ANSI-Z540 calibration standards. The final deliverable consists of fully repaired and certified kits. The response deadline for this opportunity is December 4, 2026.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Industrial Control Systems (ICS) MaintenanceThe Industrial Control Systems Maintenance subcontract, issued by the Department of Veterans Affairs National Cmop Office, involves providing specialized electrical and electronic maintenance for controllers and sensors within VA Consolidated Mail Outpatient Pharmacy projects. The scope of work focuses on troubleshooting and repairing industrial controls and electronic controllers integrated into pharmacy automation lines to ensure all systems are calibrated and fully functional. Performance will take place in Chelmsford, Massachusetts, under NAICS code 811210. Due to the technical nature of the environment, all work must strictly adhere to NFPA 70E and NFPA 99 safety standards. Additionally, all assigned personnel are required to pass OIG screening to be eligible for the project.

National Cmop Office (36C770)

POSTED

DEADLINE

Law Enforcement Communications and Radio SupportThe Law Enforcement Communications and Radio Support subcontract, issued by the Department of Defense under the W076 Endist Tulsa agency, focuses on providing essential communication infrastructure for prime contractors working on USACE Pearson-Skubitz Big Hill Lake projects. The scope of work includes the supply and maintenance of mobile and portable radio communications equipment, as well as specialized services such as radio programming, antenna installation, and system troubleshooting to ensure the delivery of fully operational communication links. Technical requirements specify that radio technicians must hold valid FCC licensing to perform the necessary duties. This opportunity falls under NAICS code 811210 and has a response deadline of November 16, 2026.

POSTED

DEADLINE

CNC Installation Supervision and Technical TrainingThis small business set-aside subcontract, managed by the Department of Defense for the Air Force Arnold Engineering Development Complex, focuses on CNC installation supervision and technical training. The selected provider will be responsible for overseeing on-site installations for prime contractors, conducting functional accuracy tests in accordance with ISO/ANSI standards, and delivering two days of initial operator training to ensure personnel are fully qualified. The primary objective of the contract is the delivery of verified functional machine installations and a trained workforce. To maintain operational readiness, the contractor must adhere to a strict warranty repair response time of 36 hours. This effort is categorized under NAICS code 811210 and is associated with the AEDC Pkp Procurement Branch.

FA9101 Aedc Pkp Procrmnt Branch

POSTED

DEADLINE

QED Preventative and Remedial Maintenance Service

Solicitation # 2031ZA27Q00009

Department Of The Treasury

POSTED

DEADLINE

J065--FY27 SERVICES (BASE+4) - Canon CT Service Contract

Solicitation # 36C24227Q0076

Solicitation 36C24227Q0076 was a firm-fixed-price request for quote issued by the Department of Veterans Affairs, Network Contracting Office 2, for the annual preventative maintenance and repair of two Canon/Toshiba Aquilion Prime 160 CT machines located at the Buffalo VA Medical Center. The requirement was set aside for Service-Disabled Veteran-Owned Small Businesses under NAICS code 811210. The proposed contract structure consisted of a base period from November 1, 2026, to October 31, 2027, with four subsequent option years. The scope of work required preventative maintenance to be performed four times per year, a 30-minute telephone response time for corrective repairs, and an on-site engineer response time of 4 to 6 hours. The government intended to award the contract to a responsible offeror based on a comparative evaluation of technical capabilities, past performance, and price. Contractors were required to provide all labor and parts, with new parts warranted for 12 months. Compliance requirements included adherence to manufacturer specifications, patient information confidentiality, and the maintenance of commercial general liability insurance. Despite the detailed solicitation and subsequent amendments to extend the submission deadline to October 28, 2026, the solicitation is now closed with no award made.

242-NETWORK Contract Office 02 (36C242)

POSTED

DEADLINE

Compressed Cylinder Overhaul, Repair, and Testing ServicesThis subcontract for the Department of the Navy's Navsup Weapon Systems Support involves the teardown, evaluation, repair, and modification of compressed cylinders. The selected contractor will be responsible for disassembling and inspecting cylinders, executing repairs according to BE Aerospace Inc drawings and technical publications, and performing operational testing to deliver one overhauled Compressed Cylinder (NSN 8120-01-585-5090) in ready-for-issue condition. The project is categorized under NAICS code 811210 and will be performed in Philadelphia. To ensure technical compliance, the contractor must maintain ISO 9001 or SAE AS9100 quality management certifications and adhere to ANSI/NCSL Z540.3 calibration standards. The solicitation was posted on October 30, 2026, with a response deadline of November 30, 2026.

Navsup Weapon Systems Support

POSTED

DEADLINE

Pump Housing Overhaul and Mechanical RepairThe Pump Housing Overhaul and Mechanical Repair subcontract involves the teardown, evaluation, repair, and reassembly of pump housing assemblies for prime contractors supporting the Department of the Navy's NAVSUP Weapon Systems Support. The scope of work includes component replacement, recording dimensional data, and verifying pass/fail criteria to deliver 22 repaired and tested assemblies in Ready for Issue condition. Performance will take place in Philadelphia and requires an enclosed warehouse equipped with special tooling and fixtures. To ensure quality and precision, the contractor must maintain ISO 9001/AS9100 and ANSI/NCSL Z540.3 calibration systems. This project falls under NAICS code 811210, with a response deadline of November 4, 2026.

Navsup Weapon Systems Support

POSTED

DEADLINE

Rotary Compressor Repair and Overhaul ServicesThis subcontract for the Department of the Navy's NAVSUP Weapon Systems Support involves the teardown, evaluation, and repair of Rotary Compressors under NIIN 015028208. The selected contractor must be an OEM authorized distributor responsible for disassembling and repairing assets in strict accordance with TDP Version 007, OEM specifications, and approved technical orders. All work must include inspection and testing per OEM drawings, with final asset marking compliant with MIL-STD-130, REV N, resulting in the delivery of one fully repaired and tested compressor. The project is categorized under NAICS code 811210 and will be performed in Mechanicsburg, Pennsylvania. Interested parties should note the response deadline of November 6, 2026, for this specialized maintenance and overhaul service.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Critical Grid Component Refurbishment and Recovery

National Energy Technology Laboratory

POSTED

DEADLINE

DISTRIBUTING SYSTEM — 6150015591184 — N0038326QNB42

Solicitation # N0038326QNB42

Solicitation N0038326QNB42, issued by NAVSUP Weapon Systems Support, is a request for quotations for the teardown, evaluation, repair, and modification of three Distributing Systems (P/N 450-075-401-111, NSN 6150-01-559-1184) to return them to a Ready For Issue condition. The contractor is responsible for providing all necessary facilities, labor, materials, and tooling, as the government will not provide manufacturing aids. Key technical requirements include a prohibition on MIL-W-81381 wire in favor of SAE-AS22759 series wire and compliance with IPC/EIAJ-STD-001C for personnel. The contract includes specific protocols for items determined to be Beyond Economical Repair, Missing on Induction, or requiring Over and Above Repair, all of which require written concurrence from DCMA and the Procuring Contracting Officer. The government intends to make a single award based on the most advantageous offer, with past performance weighted more heavily than price. Awardees must maintain a quality system conforming to ISO 9001/SAE AS9100 and a calibration system meeting ANSI/NCSL Z540.3 or ISO-10012-1. Deliverables must be packaged and marked according to MIL-STD-2073 and MIL-STD-129, with delivery expected within 90 days FOB Destination. Administrative requirements include the use of the Wide Area Workflow system for invoicing and strict adherence to DFARS cybersecurity and Buy American regulations. Quotations are due by November 30, 2026, and may include option pricing for up to 10 additional units.

Navsup Weapon Systems Support

POSTED

about 15 hours ago

DEADLINE

in about 1 month

AI Contract Overview

This subcontract opportunity with the Department of Defense, specifically for the Hq Defense Media Activity, involves providing specialized Tier-3 technical support and engineering integration for War Media Activity projects. The selected contractor will be responsible for integrating audio routing systems and delivering factory-authorized support for enterprise-scale WheatNet-IP broadcast routing infrastructures within a defense environment. To be eligible, contractors must possess verifiable OEM authorization from Wheatstone Corporation and be able to obtain base access for Fort Meade, Maryland. This is a total Small Business Set Aside under NAICS code 811210, with a response deadline of September 4, 2026.

General Info

DoD subcontract for WheatNet-IP technical support and engineering integration at Fort Meade.

Agency

Department Of Defense → Hq Defense Media Activity

NAICS

811210 - Electronic and Precision Equipment Repair and Maintenance

Place of Performance

MD, 20755, USA

Set-Aside

SBA

Documents

This scope was carved out of HQ0516-26-S0001.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Wheatstone Notice of Intent to Sole Source/Synopsis

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedSep 1

subcontract

Response DeadlineSep 4

Deadline has passed

Submission Closed

09/04/2026, 06:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → Hq Defense Media Activity

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Hq Defense Media Activity

Office AddressN/A

ContactsNo contact information available

Full Description

Performs high-level Tier-3 technical maintenance and engineering integration for prime contractors on War Media Activity (WMA) projects. Integrates audio routing systems and provides factory-authorized support for enterprise-scale WheatNet-IP broadcast routing infrastructures in a defense environment. Requires verifiable OEM authorization from Wheatstone Corporation and base access for Fort Meade, MD. Delivers maintained operational audio routing systems.

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS