Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

SPRING, HELICAL, EXTE

Active
SPE7LX-26-U-9361Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract specifies the procurement of a helical extension spring with NSN 5360-01-507-8261 and part number 1881880 under solicitation SPE7LX-26-U-9361, issued by the Department of Defense’s Strategic Acquisition Program Directorate. The requirement calls for 65 units delivered FOB origin within 104 days with no variance allowed in quantity, and inspection and acceptance occur at the destination. Packaging must comply with ASTM D3951 and MIL-STD-129 for marking and labeling, while palletization adheres to DLA’s RP001 packaging requirements, with all technical and quality standards from the DLA Master List taking precedence over ASTM standards. The unit of issue is each, priced at $65.00 per unit, totaling $4,225, and this is an estimated quantity not guaranteed for full purchase by the IDC. The contract is part of a simplified acquisition and is governed by the DLA Master List of Technical and Quality Requirements in effect on the solicitation issue date, which supersedes any conflicting specifications. All government identification must be removed from non-accepted supplies, and the delivery terms strictly enforce origin point shipment with destination inspection. The solicitation was posted on August 9, 2026, with responses due by August 24, 2026, under NAICS code 332613 for spring manufacturing. Primary point of contact is Theodore Misiolek, and all logistics and packaging details align with DLA’s standardized procedures as outlined in their official documentation and unit of issue reference tables.

General Info

Procure 65 helical extension springs, NSN 5360-01-507-8261, $65 each, FOB origin, DLA packaging standards, delivery in 104 days.

Agency

Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATEView Agency

NAICS

332613 - Spring ManufacturingView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(1)

RFQ SPE7LX-26-U-9361 for Indefinite Delivery Contract

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE
View Agency Profile
Office AddressUS
Contacts
Theodore Misiolek
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
SPRING,HELICAL,EXTE
SPRING,HELICAL,EXTENTION
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
OSHKOSH DEFENSE LLC 75Q65 P/N 1881880
LINE ITEM 0000000001 TYPE OF COVERAGE: DLA DIRECT, CONUS
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 1000239294 0001 EA 65.000
This is an estimated quantity and may not be purchased by the IDC.
NSN/MATERIAL:5360015078261
DELIVERY (IN DAYS):0104
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951.
SPE7LX-26-U-9361
SECTION B
PR: 1000239294 PRLI: 0001 CONT’D
Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

SPE7LX-26-U-9361 NSN/Part Number: 5360-01-507-8261 Quantity: 65 EA Purchase Request: 1000239294QTY: 65 Delivery: 104 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332613
New
DIBBS
SPRING, HELICAL, COMPRES
Solicitation # SPE7L1-26-T-943K
The contract is for a single helical compression spring identified by NSN 5360-01-248-1585, with a delivery requirement of 10 days after award. The solicitation number is SPE7L1-26-T-943K, issued on August 9, 2026, with responses due by August 20, 2026, under a federal procurement process managed by the Department of Defense’s Land Supply Chain. The item is intended for performance at Fort Bragg, North Carolina, and the procurement falls under NAICS code 332613 for spring manufacturing. Technical and quality requirements are incorporated by reference from the DLA Master List of Technical and Quality Requirements, accessible via the DLA website, with applicable revisions controlled by the solicitation issuance or award date depending on acquisition type. Packaging must comply with DLA packaging standards and any non-accepted supplies must have government identification removed prior to return. The primary point of contact is Kristina Derry, reachable via email and phone provided, and all relevant information is accessible through the DIBBS portal.
LAND SUPPLY CHAIN

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, COMP
Solicitation # SPE7L3-26-T-168Q
The contract is for a single helical compression spring with part number 670184552 and NSN 5360-01-198-8082, to be delivered within 20 days of award. The solicitation number is SPE7L3-26-T-168Q, issued by the Department of Defense under the Land Supplier Opns Vehicle Spt organization, with a response deadline of August 20, 2026. The item is governed by DLA packaging and technical requirements, which are incorporated by reference from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or award date depending on acquisition size. Strict prohibitions are in place against the intentional addition of mercury or mercury-containing compounds to the spring or its direct contact surfaces, except for specific functional uses such as batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or NAVSEA-specified reagents. Portable fluorescent lamps or instruments containing mercury must be shock-proof and feature a secondary containment boundary in compliance with NAVSEA 5100-003D. Removal of government identification is required from non-accepted supplies, and the contractor is Roper Whitney Inc of Rockford, IL. All contractual obligations are subject to the terms outlined in the DLA procurement framework, with the point of contact for inquiries being Lee Miller at the provided email and phone number.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, COMP
Solicitation # SPE7L1-26-T-947G
The contract is for 1,263 helical compression springs with NSN 5360-00-770-4949 under solicitation SPE7L1-26-T-947G, with a deadline for response on August 20, 2026, and delivery required within 18 days of award. The item is classified under NAICS code 332613 and is being procured by the Department of Defense’s Land Supply Chain through the DLA. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Packaging must comply with DLA standards, and all supplies must be free of government identification if rejected. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute chemicals must be approved unless explicitly authorized by the specification. Asbestos is not permitted in any components, and alternative materials must be reviewed and approved under Clause L30 and Provision 4 conditions. The place of performance is Phoenix, Arizona, with Chelsea Cunningham listed as the primary point of contact for inquiries.
LAND SUPPLY CHAIN

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, TORS
Solicitation # SPE7L1-26-T-946F
This contract specifies the procurement of a helical torsion spring with part number 7521423 and NSN 5360-00-752-1423, under solicitation SPE7L1-26-T-946F. A total of 1,520 units are required to be delivered FOB origin within 102 days, with zero variance allowed in quantity. Inspection and acceptance occur at the destination, and packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, including marking per MIL-STD-129 with no special markings. The item is designated as a critical application item and must adhere to technical specifications referenced in the DLA Master List of Technical and Quality Requirements, with sampling governed by MIL-STD-1916 or comparable zero-based methods, assigning verification levels or AQLs based on attribute classification. Mercury and mercury-containing compounds are prohibited except in specified functional components like batteries, fluorescent lamps, and instrument controls, which must include secondary containment as per NAVSEA 5100-003D. The contract enforces full and open competition, and all deliverables must meet the technical drawing revision dated June 11, 2026. Delivery is to Industries of the Blind Inc in Greensboro, NC, with shipping governed by DLA procedural notes, and the required ship date is December 1, 2026, against an original delivery deadline of February 14, 2027.
LAND SUPPLY CHAIN

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, COMP
Solicitation # SPE7L3-26-T-168H
This contract is for the procurement of a single helical compression spring identified by NSN 5360-01-200-0414, with a delivery requirement of 20 days after order. The solicitation number is SPE7L3-26-T-168H, issued by the Department of Defense through the Land Supplier Operations Vehicle Support organization, with a response deadline of August 20, 2026. The contract incorporates all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, accessible via the official DLA website, and the applicable revision is determined by the solicitation issue date or award date depending on the acquisition size. The supplier, Roper Whitney Inc. of Rockford, IL, must ensure no intentional addition of mercury or mercury-containing compounds to the product or its packaging, except for specific permitted uses such as batteries, fluorescent lights, sensors, controls, weapon systems, or chemical reagents specified by NAVSEA. Portable fluorescent lamps and instruments containing mercury must be shockproof and equipped with a secondary containment barrier in compliance with NAVSEA 5100-003D. All government identification must be removed from non-accepted supplies, and performance is to be conducted at FPO, ZIP 96632. Primary point of contact is Lee Miller at the provided email and phone number.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 332613
New
DIBBS
SPRING, FLAT
Solicitation # SPE7L1-26-T-946D
The contract pertains to the procurement of one flat spring with NSN 5360-01-648-4859 under solicitation SPE7L1-26-T-946D, issued by the Department of Defense’s Land Supply Chain. Delivery is required within 20 days of award, and responses must be submitted by August 20, 2026. The solicitation incorporates technical and quality requirements referenced in the DLA Master List, with applicable revisions controlled by the solicitation issue date. Packaging must comply with DLA standards, and tailored higher-level quality requirements apply to both manufacturers and non-manufacturers. The item involves technical data subject to export controls under ITAR or EAR, with strict limitations on access and disclosure to unauthorized foreign persons, including foreign nationals employed by U.S. entities. Access to controlled data requires approved JCP certification, completion of designated DLA training, and formal authorization. The place of performance is Fort Sill, Oklahoma, and the primary point of contact is George Mitchell at DLA, reachable via email and phone. The NAICS code is 332613, indicating classification under Other Spring Manufacturing.
LAND SUPPLY CHAIN

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, COMPRES
Solicitation # SPE7L1-26-T-943L
The contract is for the procurement of 10 helical compression springs with NSN 5360-01-439-2296 and part number 3913581906, supplied by Parker Hannifin Corporation. Delivery is required within five days of order placement, FOB origin, with no quantity variance allowed. Inspection and acceptance occur at the destination location, and the springs must be packaged in accordance with ASTM D3951, though any conflicting requirements from the DLA Master List of Technical and Quality Requirements take precedence. All packaging and labeling must comply with MIL-STD-129, and palletization must adhere to DLA’s packaging requirements. Shipment must be sent by the fastest traceable means, excluding parcel post, and delivered to the designated DLA facility in Texarkana, Texas. The unit of issue is each, with a total price of $10.00 per unit. The contract is issued under solicitation SPE7L1-26-T-943L, with a required delivery date of August 6, 2026, and must be fulfilled by a supplier certified to meet federal defense supply standards. Government marking, tracking, and reporting codes are embedded in the shipment instructions for accountability and logistics tracking.
LAND SUPPLY CHAIN

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, COMP
Solicitation # SPE7L1-26-T-944Z
The contract pertains to the procurement of 46 helical compression springs, identified by NSN 5360-00-535-8852 and part number 11319, manufactured by MID-AMERICA AEROTECH, LLC. The item is designated as a critical application item and must comply with stringent technical and quality requirements as defined in the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers incorporated into the contract. Sampling and inspection procedures must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances permitted unless otherwise specified, and attributes are to be classified with predefined verification levels or AQLs. The springs must be marked in accordance with MIL-STD-130N and packaged per MIL-STD-2073-1E with specified preservation methods, wrapping materials, and unit containers, with palletization conforming to DLA packaging standards. Marking must adhere to MIL-STD-129 with no special marking code applied. Delivery is required FOB origin within 27 days, with a need ship date of August 18, 2026, and the final destination is Arizona Industries for the Blind in Phoenix, AZ. Inspection and acceptance occur at the destination, and the quantity permitted has zero variance. The contract is issued under solicitation SPE7L1-26-T-944Z with a response deadline of August 20, 2026, and is managed by the Department of Defense’s Land Supply Chain.
LAND SUPPLY CHAIN

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, COMP
Solicitation # SPE7L1-26-T-945Y
The contract specifies the procurement of 18 helical compression springs with NSN 5360-01-377-9544 under solicitation SPE7L1-26-T-945Y, with a response deadline of August 20, 2026, and a delivery requirement of five days after delivery order issuance. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. Packaging must comply with DLA packaging standards, and all supplies must be free of government identification upon rejection. The use of Class I ozone-depleting chemicals is strictly prohibited, overriding any conflicting specification requirements, and any substitute chemicals must be submitted for approval unless explicitly authorized. Asbestos is forbidden in all components, and any alternative materials must undergo formal approval per Clause L30 and Provision 4 conditions. The contract is managed by the Department of Defense’s Land Supply Chain, with Kristina Derry listed as the primary point of contact, and performance is expected within the United States.
LAND SUPPLY CHAIN

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 332613
New
DIBBS
SPACER, RING
Solicitation # SPE4A7-26-T-635G
The contract pertains to the procurement of 31 units of a SPACER, RING with NSN 5365-00-068-0254 under solicitation SPE4A7-26-T-635G, issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. Delivery is required within five days of award, with a response deadline of August 17, 2026. The item is subject to multiple stringent technical and quality requirements, including the Defense Logistics Agency’s packaging standards, inspection and acceptance at origin, and mandatory physical marking of the bare item. The supplier must comply with export control regulations under ITAR or EAR, as the technical data associated with this item is classified and cannot be disclosed to foreign persons without prior authorization from the Department of State or Commerce; access is restricted to contractors with approved US/Canada Joint Certification Program status, completion of mandatory DOD export control training, and explicit DLA authorization. Additional requirements include CMMC Level 2 certification for the third-party assessment organization, adherence to the DLA Master List of Technical and Quality Requirements, and specific documentation procedures for source approval. The place of performance is identified as Clearfield, Utah, with a ZIP code of 84016, and Keyanna McNeil-Johnson is the primary point of contact for the solicitation.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, COMPRES
Solicitation # SPE7L1-26-T-944H
The contract specifies the procurement of 20 helical compression springs with NSN 5360-00-535-8852 and part number 11319 manufactured by MID-AMERICA AEROTECH, LLC, under solicitation SPE7L1-26-T-944H. The item is classified as a critical application item subject to stringent quality and identification standards, including compliance with MIL-STD-130N for U.S. military property marking. All supplies must adhere to DLA packaging requirements as outlined in RP001 and MIL-STD-2073-1E, with specific packaging methods including dry preservative treatment, GB wrap, and unit containerization as BE OPI, packed in intermediate containers of no more than 25 units, and marked in accordance with MIL-STD-129. Sampling and inspection procedures must follow MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances required unless otherwise noted, and critical, major, and minor attributes are to be verified at levels VII, IV, and II respectively. The delivery is set for 165 days after order, FOB origin, with destination as both inspection and acceptance point. The final delivery address is Arizona Industries for the Blind in Phoenix, AZ, with a required ship date of February 2, 2027. The contract enforces a strict zero percent variance on quantity and requires adherence to all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, accessible via the official DLA website.
LAND SUPPLY CHAIN

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, COMP
Solicitation # SPE7L1-26-T-943Z
The contract is for 10 helical compression springs with NSN 5360-01-535-5579 and part number DGMT0005, supplied by DILLON AERO, INC. under solicitation SPE7L1-26-T-943Z, with a required delivery date of August 5, 2026, and a 20-day delivery window from the origin point. The items must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which take precedence over applicable industry standards like ASTM D3951. Packaging must follow MIL-STD-129 and DLA’s packaging guidelines under RP001, including palletization and labeling standards, and must not use parcel post—shipment must occur via the fastest traceable means. The springs are subject to MIL-STD-130N for identification marking and require compliance with Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment. Delivery is FOB origin to the specified military address at Fort Campbell, Kentucky, with no quantity variance permitted. Documentation for source approval must be provided per RC001, and government identification must be removed from non-accepted supplies per RQ011. Covered defense information rules apply under RD002. The unit of issue is each, priced at $10.00 per unit, totaling $100.00, and the contract incorporates all specified DLA requirements without shelf-life constraints.
LAND SUPPLY CHAIN

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details

More opportunities from Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE

Same awarding agency

NAICS: 334419
New
DIBBS
WIRING HARNESS, BRANCHE
Solicitation # SPE7LX-26-U-9349
The contract is for a branched wiring harness with part number 1972960 and NSN 6150013696087, procured under solicitation SPE7LX-26-U-9349 by OSHKOSH DEFENSE LLC for the Department of Defense. A quantity of 460 units is requested at a unit price of $460.00, totaling $211,600, with delivery required within 158 days FOB origin. The item is covered under DLA Direct CONUS procurement and is subject to strict compliance with DLA packaging standards per RP001, MIL-STD-2073-1E, and MIL-STD-129 for marking, with no special marking required. Packaging must use unit container E5, intermediate container E5, and follow prescribed preservation methods including dry cleaning and no cushioning materials. Quality and technical requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, and the contractor must adhere to tailored higher-level quality requirements applicable to both manufacturers and non-manufacturers. Cybersecurity compliance is mandated through CMMC Level 2 Self-Assessment, and the contract includes a zero variance allowance on quantity. All deliveries are subject to inspection and acceptance at the destination. The contract was posted August 9, 2026, with responses due by August 24, 2026.
Other Electronic Component Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 15 days
View Details
NAICS: 332510
New
DIBBS
STRAP, WEBBING
Solicitation # SPE7LX-26-U-9350
The contract is for the procurement of 29 units of webbing strap identified by NSN 5340-00-868-9610 under solicitation SPE7LX-26-U-9350, with a response deadline of August 24, 2026, and a delivery requirement of 115 days after award. The item falls under NAICS code 332510 and is managed by the Strategic Acquisition Program Directorate within the Department of Defense. Technical and quality requirements referenced in the contract are drawn from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. All supplies must comply with DLA packaging standards, and government identification must be removed from non-accepted items. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute materials require prior approval unless explicitly authorized by specification. This procurement is subject to full and open competition, and the technical data associated with the item is controlled under ITAR or EAR regulations, restricting export and disclosure to foreign persons without authorization. Access to such data is limited to contractors with approved U.S./Canada Joint Certification Program status, having completed mandatory DLA export control training and questionnaire, and received formal approval from DLA. The point of contact for inquiries is Theodore Misiolek, reachable via email or phone provided.
Hardware Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 15 days
View Details
NAICS: 332510
New
DIBBS
CASTER, SWIVEL
Solicitation # SPE7LX-26-U-9356
This contract specifies the procurement of swivel casters under solicitation SPE7LX-26-U-9356, with a total quantity of 33 units, each identified by the NSN 5340015812855 and part number S-7010-PR-4SL-ZB or S-7010-PRB-4SL-ZB from THE HAMILTON CASTER & MFG. COMPANY. The item is a critical application requiring compliance with MIL-STD-130N for identification marking of U.S. military property, and all technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements supersede any conflicting specifications. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute chemicals must be approved unless explicitly authorized by the specification. Packaging must follow DLA requirements, including MIL-STD-129 for marking and labeling, and ASTM D3951 for commercial packaging unless the material is hazardous, in which case FED-STD-313 and TQ requirement IP025 apply. Palletization must adhere to RP001. Delivery is FOB origin with a 116-day timeline, zero quantity variance allowed, and inspection and acceptance occur at destination. The contract is issued under a Women-Owned Small Business set-aside with a unit of issue of EA and is managed by the Department of Defense’s Strategic Acquisition Program Directorate.
Hardware Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 15 days
View Details
NAICS: 332722
New
DIBBS
BRACKET, MOUNTING
Solicitation # SPE7LX-26-U-9351
The contract is for two mounting brackets identified by NSN 5340-01-587-3815 under solicitation SPE7LX-26-U-9351, with a response deadline of August 24, 2026, and a delivery requirement of 79 days after award. The procurement is a total small business set-aside under NAICS code 332722, managed by the Department of Defense’s Strategic Acquisition Program Directorate. Technical and quality requirements are incorporated by reference from the DLA Master List of Technical and Quality Requirements, with applicable revisions governed by the solicitation or award date depending on acquisition size. Packaging must comply with DLA standards, and any non-accepted supplies must have government identification removed prior to return. The item involves technical data subject to export controls under ITAR or EAR, restricting disclosure to foreign persons, including employees of foreign subsidiaries, and requiring compliance with DFARS 252.225-7048. Access to this controlled data is limited to contractors with approved US/Canada Joint Certification Program certification, completed DLA training on export-controlled data handling, and formal approval from the DLA controlling authority. The point of contact for inquiries is Theodore Misiolek, with further details available through the DIBBS portal.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 15 days
View Details
NAICS: 332510
New
DIBBS
RETAINER, NUT AND BOLT
Solicitation # SPE7LX-26-U-9353
This contract is for the procurement of a retainer, nut, and bolt with NSN 5340-01-384-7624 and part number 294055, supplied by Monadnock Company and Leonardo Spa Helicopters Division under solicitation SPE7LX-26-U-9353. The quantity is 72 units, delivered FOB origin with a delivery window of 116 days and no variance allowed in quantity. All items must comply with DLA packaging requirements as outlined in RP001, including strict adherence to MIL-STD-129 for marking and labeling, and commercial packaging per ASTM D3951 unless the item is classified as hazardous under FED-STD-313, in which case packaging must meet TQ requirement IP025. Technical and quality specifications referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, which override any conflicting commercial standards. Inspection and acceptance occur at the destination, and the unit of issue is each (EA) with a total contract value of $72.00. The item is designated as a critical application item, requiring strict compliance with all imposed standards, and is issued under a DLA direct, CONUS procurement structure.
Hardware Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 15 days
View Details
NAICS: 336310
New
DIBBS
BOWL, SEDIMENT
Solicitation # SPE7LX-26-U-9362
This contract pertains to the procurement of a BOWL, SEDIMENT with NSN 2910-01-687-9089 and part number 20771574, issued under solicitation SPE7LX-26-U-9362 as a total small business set-aside. The contractor is required to deliver 55 units, each at a unit price of $55.00, for a total price of $3,025.00, with delivery due within 74 days from award and FOB origin. The item must be shipped with no variance in quantity—neither plus nor minus—and inspected at the destination point. DLA packaging standards take precedence over all others, requiring compliance with ASTM D3951 and mandatory adherence to MIL-STD-129 for marking and labeling, with palletization governed by the DLA Packaging Requirements for Procurement. All packaging and unit of issue must reflect the contract’s specified quantity per unit pack, and no government identification may be removed from non-accepted supplies. Ozone-depleting chemicals are strictly prohibited in the manufacture or packaging of this item, and any substitutes require pre-approval unless explicitly authorized by the specification. The technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, with the applicable revision determined by the solicitation or award date. Delivery is directed via DLA Direct within the Continental United States, and the unit of issue is each (EA), consistent with DoD and ANSI X12 standards.
Motor Vehicle Gasoline Engine and Engine Parts Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 15 days
View Details
NAICS: 332510
New
DIBBS
BRACKET, VEHICULAR C
Solicitation # SPE7LX-26-U-9359
The contract is for the procurement of two units of a vehicular bracket identified by NSN 2590-01-524-6137 under Solicitation SPE7LX-26-U-9359, with a total small business set-aside and a NAICS code of 332510. Delivery is required within 92 days of award, and the solicitation was posted on August 9, 2026, with responses due by August 24, 2026. Compliance with the DLA Master List of Technical and Quality Requirements is mandatory, and all technical and quality specifications referenced by R or I numbers must be met. The contract imposes strict restrictions on the use of Class I ozone-depleting chemicals, prohibiting their inclusion in any delivered items, even if specifications otherwise permit, and requires prior approval for any substitute chemicals. Technical data associated with this item is subject to export controls under ITAR or EAR, and access is restricted to contractors with approved US/Canada Joint Certification Program status, completed DOD export control training, and approved DLA authorization. DFARS 252.225-7048 governs the handling of this controlled data, including disclosures to foreign persons within the U.S. Additionally, government identification must be removed from non-accepted supplies, and packaging must adhere to DLA procurement standards. Cybersecurity obligations include CMMC Level 2 certification for any third-party assessors involved. The primary point of contact is Theodore Misiolek of the Defense Logistics Agency's Strategic Acquisition Program Directorate.
Hardware Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 15 days
View Details
NAICS: 332510
New
DIBBS
PLATE, MOUNTING
Solicitation # SPE7LX-26-U-9357
The contract pertains to the procurement of 57 mounting plates with NSN/part number 5340-00-614-7275 under solicitation SPE7LX-26-U-9357, which is a total small business set-aside with a NAICS code of 332510. Delivery is required within 95 days after order award, and responses must be submitted by August 24, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Packaging must comply with DLA standards, and all items must not contain Class I ozone-depleting chemicals, with any substitute chemicals requiring prior approval unless explicitly authorized by specifications. Configuration changes require formal engineering change proposals or variance requests. Technical data associated with this item is subject to export control under ITAR or EAR, and access is restricted to contractors with approved JCP certification, completion of required DOD export control training, and formal authorization from DLA. Distribution of controlled data is limited to qualified U.S. entities and their subsidiaries, with DFARS 252.225-7048 applying. Government identification must be removed from non-accepted supplies, and full and open competition is mandated. The point of contact for inquiries is Theodore Misiolek at the Defense Logistics Agency.
Hardware Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 15 days
View Details
NAICS: 332722
New
DIBBS
COVER, ACCESS
Solicitation # SPE7LX-26-U-9360
This contract, issued under solicitation number SPE7LX-26-U-9360, covers the procurement of 30 units of COVER, ACCESS with NSN 5340-01-579-2214 at a unit price of $30.00, totaling $900.00. The item is classified under DLA DIRECT, CONUS coverage with delivery required within 116 days FOB origin, and no variance in quantity is permitted—exactly 30 units must be delivered. Inspection and acceptance occur at the destination, and all packaging must comply with DLA’s Master List of Technical and Quality Requirements, which supersede ASTM D3951. Packaging must adhere to MIL-STD-129 for marking and labeling, and palletization must follow RP001 standards. If the material is hazardous per FED-STD-313, it must be packaged according to TQ requirement IP025; otherwise, commercial packaging per ASTM D3951 applies, though DLA requirements override this. The Unit of Issue is EA, and the Quantity per Unit Pack is specified as 001. The contract is managed by the Department of Defense’s Strategic Acquisition Program Directorate, with Theodore Misiolek as the point of contact. The solicitation was posted on August 9, 2026, with responses due by August 24, 2026, and applies to simplified acquisition procedures, meaning the revision of the DLA Master List in effect on the solicitation issue date controls unless amended. The NAICS code is 332722, and the item is to be delivered without government identification removed, in accordance with RQ011. The DoD unit of issue is used, and corresponding ANSI X12 equivalents can be referenced via the provided DLA link. The estimated quantity noted does not guarantee purchase by the IDC, and all technical and quality requirements referenced via R or I numbers are incorporated through the DLA Master List accessible online.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 15 days
View Details
NAICS: 332999
New
DIBBS
COVER, MANHOLE
Solicitation # SPE7LX-26-U-9355
This contract specifies the procurement of manhole covers under solicitation SPE7LX-26-U-9355, with a total quantity of four units and a unit price of $4.00, resulting in a total price of $16.00. The item is identified by NSN 2510-01-571-5911 and is classified under a Total Small Business Set-Aside. Delivery is required within 65 days FOB origin, with no variance allowed in quantity, and inspection and acceptance occur at the destination. Packaging must comply with ASTM D3951, but all DLA Master List of Technical and Quality Requirements take precedence, including adherence to MIL-STD-129 for marking and labeling. Palletization must follow DLA Packaging Requirements for Procurement, and the unit of issue is each. Government identification must be removed from any non-accepted supplies. The contract is for direct, CONUS delivery and is managed by the Strategic Acquisition Program Directorate within the Department of Defense. All technical and quality requirements referenced are defined in the DLA Master List, and the applicable revision is controlled by the solicitation issue date. The procurement is part of a federally awarded contract with a response deadline of August 24, 2026.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 15 days
View Details
NAICS: 333613
New
DIBBS
SHAFT, SHOULDERED
Solicitation # SPE7LX-26-U-9354
The contract is for the procurement of six shafts with a shoulder design, identified by NSN 3040-01-497-9450, under solicitation SPE7LX-26-U-9354, with a response deadline of August 24, 2026. This is a total small business set-aside under NAICS code 333613, managed by the Department of Defense’s Strategic Acquisition Program Directorate. Delivery is required within 47 days after order placement. The technical and quality requirements referenced are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for large acquisitions. Packaging must comply with DLA standards, and any non-accepted supplies must have government identification removed. Technical data associated with this item is subject to export controls under ITAR or EAR, prohibiting unauthorized disclosure to foreign persons, including foreign national employees and subsidiaries, even within the United States. Access to such data is restricted to contractors who hold an approved US/Canada Joint Certification Program certification, have completed required DOD export control training, and have received formal approval from DLA.
Mechanical Power Transmission Equipment Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 15 days
View Details
NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE7LX-26-U-9352
The contract pertains to the supply of three gaskets identified by NSN 5330-01-181-0636, with a delivery deadline of 62 days after order placement. All items must comply with the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on procurement size. Packaging must adhere to MIL-DTL-117, Type II, Class C, Style 1, requiring medium duty, waterproof, greaseproof, and opaque bags to protect against UV degradation, applicable to direct vendor delivery, foreign military sales, and stock shipments. The gaskets must be free of asbestos, and any replacement materials require approval under Clause L30 and Provision 4 conditions. Mercury and mercury-containing compounds are strictly prohibited unless part of functional components like batteries, fluorescent lights, sensors, weapon systems, or specified chemical reagents as defined by NAVSEA; portable lamps and instruments containing mercury must include shock-proof construction and a secondary containment barrier per NAVSEA 5100-003D. The solicitation number is SPE7LX-26-U-9352, posted on August 9, 2026, with responses due by August 24, 2026, under the NAICS code 339991, managed by the Department of Defense’s Strategic Acquisition Program Directorate with Theodore Misiolek as the primary point of contact.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 15 days
View Details