Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

This Government Contract opportunity from Tennessee was posted on September 10, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Steel Utility Pole Fabrication and Supply

Closed
State & Local

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332312
New
ACE-1199-1386-00 Tower Design and Fabrication for Various RCAG/RTR Sites (ADM, DPA, ONL, and RWF)
Solicitation # ace-1199-1386-00-tower-design-fabrication-various-rcagrtr-sites-adm-dpa-onl-rwf
Parsons Corporation is soliciting bids for the design, fabrication, and delivery of towers for various RCAG/RTR sites located in Oklahoma, Illinois, Nebraska, and Minnesota, specifically serving the ADM, DPA, ONL, and RWF locations. This project falls under NAICS code 332312 and requires that the selected offeror be fully bonded and insured to perform the work. This opportunity is set aside for small businesses, including certified Veteran Owned, Service-Disabled Veteran Owned, Women-Owned, and HUBZone small businesses. Interested parties must submit their responses by November 2, 2026. The primary point of contact for this solicitation is Thomas Sheehan.
Parsons Corporation

POSTED

about 6 hours ago

DEADLINE

in 4 days
NAICS: 332312
New
DIBBS
Marine Metal Door Manufacturer/SupplierThis subcontract, issued by the Department of Defense under the DLA Weapons Support Fluid Handling Division, requires the fabrication or procurement of seven marine-grade metal doors, identified as NSN 2040014437111. The supplier must utilize corrosion-resistant materials and ensure all units strictly adhere to MIL-STD-129 military marking standards and domestic material restrictions. The final products are to be packaged for FOB Origin shipment. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 332312, with performance taking place in New Cumberland. Interested parties must submit their responses by November 9, 2026. This contract serves prime contractors who are fulfilling broader DLA supply obligations.
DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 19 hours ago

DEADLINE

in 12 days
NAICS: 332312
New
DIBBS
Manufacturing of Mending Plates (NSN 5340-01-732-9372)This subcontract, issued by the DLA Weapons Support Land Supply Chain, requires the manufacture of 84 precision mending plates under NSN 5340-01-732-9372. The contractor must fabricate the units according to RBC Transport Dynamics Corp part number 180004 specifications and DLA technical requirements. All production must utilize Berry Amendment compliant materials and processes free of ozone-depleting chemicals. Deliverables must be packaged in accordance with MIL-STD-129 and ASTM D3951 standards. The opportunity is a total small business set-aside under NAICS code 332312, with performance located in New Cumberland. To be eligible, the contractor must provide a CMMC Level 2 self-assessment and obtain engineering source approval. The response deadline for this requirement is November 9, 2026.
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 19 hours ago

DEADLINE

in 12 days
NAICS: 332312
New
DIBBS
Supply of Armor Plate (NSN 9535-01-611-9013)This subcontract involves the supply of specialized armor plating under NSN 9535-01-611-9013 for prime contractors working on Defense Logistics Agency Troop Support Construction and Equipment projects. The selected provider is responsible for manufacturing or sourcing the armor plate using precision cutting and finishing equipment to ensure strict adherence to technical specifications. All deliverables must comply with MIL-STD-2073-1E packaging standards, specifically requiring the use of a 3 x 2-1/2 inch stiffener to secure items. The contract mandates a delivery timeline of 30 days after the order is placed, with performance centered in the 85613-6000 zip code area.
Defense Logistics Agency

POSTED

about 19 hours ago

DEADLINE

in 5 days
NAICS: 332312
New
DIBBS
Supply of Vehicular Component Brackets (NSN 2590016091130)This subcontract involves the manufacture or sourcing of 30 specialized vehicular component brackets for the Department of Defense, specifically supporting DLA Weapons Support Land Supplier Operations. The components must strictly adhere to Part Piece Number 12504326-010 and NSN 2590016091130 as specified in the technical drawings. Performance will take place in Tracy, California, under NAICS code 332312. Critical compliance mandates include strict adherence to Berry Amendment domestic sourcing requirements to ensure materials are produced within the United States. Additionally, the use of additive manufacturing is prohibited unless explicit authorization is granted. The response deadline for this requirement is November 9, 2026.
DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 19 hours ago

DEADLINE

in 12 days
NAICS: 332312
New
DIBBS
Precision Tube Fabrication (NSN 1730-01-303-9285)This subcontract, issued by the Department of Defense under a Service-Disabled Veteran-Owned Small Business set-aside, requires the fabrication of 15 structural dolly tubes. The work must be performed in New Cumberland and adhere strictly to NSN 1730-01-303-9285 and MIL-STD-100G technical specifications. The contractor is expected to utilize precision tube cutting, bending, and welding equipment to deliver the completed units for prime contractors on DLA supply contracts. Compliance and security are critical components of this agreement. The selected provider must maintain CMMC Level 2 certification and ensure full adherence to DFARS 252.204-7012 as well as ITAR and EAR regulations. Interested parties must respond by November 9, 2026.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 19 hours ago

DEADLINE

in 12 days
NAICS: 332312
New
DIBBS
Supplier of Structural Channels (NSN 9540-01-474-4371)This subcontract involves the supply of structural channels to prime contractors supporting Defense Logistics Agency Troop Support Construction and Equipment Metals contracts. The selected supplier is responsible for manufacturing or sourcing materials that strictly adhere to the technical specifications of NSN 9540-01-474-4371. The scope of work includes rigorous quality control and palletization processes conducted in accordance with RP001 DLA Packaging Requirements for Procurement. The supplier is tasked with the final delivery of these palletized structural channels to a designated destination, with performance centered in the 10567-5000 zip code area.
Defense Logistics Agency

POSTED

about 19 hours ago

DEADLINE

in 5 days
NAICS: 332312
New
DIBBS
Fabrication of LEVER, WELDMENT (NSN 1740-01-281-3606)
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 19 hours ago

DEADLINE

in 12 days
NAICS: 332312
New
DIBBS
Vehicular Channel Supplier
DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 19 hours ago

DEADLINE

in 12 days
NAICS: 332312
New
DIBBS
Precision Metal Fabrication - Tripod Jack BracesThis subcontract involves the precision fabrication of 166 Tripod Jack Braces for prime contractors supporting DLA Troop Support projects. The manufacturing process must strictly adhere to Basic Drawing 98750 44D9840 Revision K and Reference Drawing 98752 200415485 Revision E to produce units under NSN 1730-00-671-3302. The work requires the use of precision machining equipment, and the use of additive manufacturing is explicitly prohibited. Compliance requirements are stringent, necessitating CMMC Level 2 certification, DFARS 252.204-7012 compliance, and US/Canada Joint Certification Program status for ITAR and EAR regulations. The project is managed under NAICS code 332312 for the Department of Defense, with the place of performance located in New Cumberland. Responses to the solicitation are due by November 9, 2026.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 19 hours ago

DEADLINE

in 12 days
NAICS: 332312
New
DIBBS
Manufacture of Access Covers (P/N 014414-1)This subcontract involves the manufacture of 18 precision access covers, identified as NSN 5340011823757, for the DLA Weapons Support Land Supply Chain. The items are classified as Critical Application Items and must be fabricated according to Meggitt P/N 014414-1 specifications. All units require identification marking in accordance with MIL-STD-130N and must be delivered as finished, marked components. The project is governed by strict regulatory requirements, including compliance with the Buy American Act and a mandatory CMMC Level 2 self-assessment. Performance of the contract will take place in Tracy, California. Interested parties must adhere to the response deadline of November 9, 2026.
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 19 hours ago

DEADLINE

in 12 days
NAICS: 332312
New
DIBBS
Hoisting Beam Fabrication and AssemblyThis subcontract involves the fabrication and assembly of ten unfinished hoisting beams for prime contractors supporting DLA Troop Support projects. The scope of work includes cutting, welding, and assembling structural components in strict accordance with drawing 19207 10950131 Rev D to ensure all units meet the load-bearing specifications for NSN 3940-00-089-8189. The project is managed under the Department of Defense and requires strict adherence to the DLA Master List of Technical and Quality Requirements. Due to the nature of the technical data involved, the contractor must maintain full compliance with ITAR and EAR regulations. The solicitation was posted on October 27, 2026, with a response deadline of November 9, 2026.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 19 hours ago

DEADLINE

in 12 days

AI Contract Overview

Show more

This subcontract for Steel Utility Pole Fabrication and Supply involves the production and delivery of specialized 60ft steel utility poles for prime contractors working on Nashville Electric Service infrastructure projects. The poles must feature a 0471 ft-kips moment capacity at the ground line, meeting H8 equivalent standards. All fabrication must include drilling according to NES Specification LSK-1212 and hot-dipped galvanizing in compliance with ASTM A123. The selected provider must possess the necessary steel fabrication and galvanizing facilities to complete the order and deliver the finished poles directly to NES storage yards in Nashville. The solicitation was posted on September 10, 2026, with a response deadline of September 25, 2026, under NAICS code 332312.

General Info

Subcontract for fabricating and supplying 60ft steel utility poles for Nashville Electric Service.

Agency

Tennessee → Nashville Electric Service

NAICS

332312 - Fabricated Structural Metal Manufacturing

Place of Performance

Nashville, TN, USA

Set-Aside

NONE

Documents

This scope was carved out of Z5162.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Steel Poles

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyTennessee → Nashville Electric Service
ContactsNo contacts available
OfficeN/A
Organization / AgencyTennessee → Nashville Electric Service
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Supplies specialized steel utility poles for prime contractors on Nashville Electric Service (NES) infrastructure projects. Fabricates 60ft poles with 0471 ft-kips moment capacity at the ground line (H8 equivalent). Performs hot-dipped galvanizing per ASTM A123 and drilling per NES Specification LSK-1212. Requires steel fabrication and galvanizing facilities. Delivers completed 60ft steel poles to NES storage yards.

More opportunities from Tennessee → Nashville Electric Service

Same awarding agency

NAICS: 484220
New
SLED
Specialized Flatbed/Open-Top Transport for Steel PolesThis subcontract involves the specialized transport of five 30-foot steel poles for prime contractors working on Nashville Electric Service projects in Nashville. The selected provider must utilize an open-top vehicle to facilitate efficient unloading and is strictly required to keep the poles wrapped throughout transit to protect the factory-applied dark bronze finish. The primary objective is the delivery of the shafts to the designated site in a condition that preserves the integrity of the factory finish. This opportunity falls under NAICS code 484220, with a response deadline set for November 3, 2026.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 332323
New
SLED
Supply of Standard Steel Square Straight Shafts (30')This subcontract involves the manufacture and delivery of five 30-foot standard steel square straight shafts for prime contractors working on Nashville Electric Service projects in Nashville. Each shaft must be constructed with four-hole anchor bases, two detachable 2 inch IPS horizontal tenons, and a factory-applied dark bronze finish. To ensure structural integrity, all poles are required to comply with NESC 90 MPH wind load requirements. The completed shafts must be delivered wrapped to protect the finish. This procurement opportunity is categorized under NAICS code 332323, with a response deadline set for November 3, 2026.
Ornamental and Architectural Metal Work Manufacturing

POSTED

1 day ago

DEADLINE

in 6 days
View Details
New
SLED
Steel Pole
Solicitation # Z5432
Nashville Electric Service has issued Request For Bid Z5432 for the procurement of five 30-foot standard steel square straight shafts. The poles must feature a four-hole anchor base with a bolt circle between 10.5 and 11.5 inches, base nut covers, and a hand hole access of at least 3.5 by 5 inches with a cover. Each shaft must be factory-applied in dark bronze and equipped with two detachable 2-inch IPS horizontal tenons for luminaire mounting. Technical requirements specify that the poles must comply with the NESC 90 MPH wind load requirement and possess the strength to support two 50lb fixtures at 180 degrees with an EPA of 2.5 square feet each on a 10-inch arm. Bids must be submitted via the Bid Center by 2:00 pm local time on November 3, 2026. Only approved brands, specifically Hapco and Lytepole, are acceptable, and alternate brands will not be considered. To ensure quality and ease of unloading, poles must be wrapped to protect the finish during shipment and delivered using an open-top vehicle. Vendors are required to state their earliest delivery in calendar days, as delivery time may be a factor in the award decision. The primary procurement contact for this solicitation is Shanna Faulk.

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 332510
New
SLED
Supply of Figure 8 Swing Links (30K lbs)This subcontract agreement involves the supply of forged steel Figure 8 swing chain links for prime contractors working under Nashville Electric Service contracts. The required components must feature two 7/8 inch eyes, possess an ultimate strength of 30,000 pounds, and be galvanized in accordance with ASTM A123 standards. All deliverables must strictly adhere to specified brand and part number requirements for ItemId 182574500. The contract is managed by the Nashville Electric Service in Tennessee, with the place of performance located in Nashville. Interested parties must respond by October 29, 2026, regarding this procurement categorized under NAICS code 332510.
Hardware Manufacturing

POSTED

5 days ago

DEADLINE

in 1 day
View Details
NAICS: 423830
New
SLED
Supplier of 3M Safety Walk Anti-Slip RollsThis subcontract agreement involves the procurement and delivery of industrial anti-slip safety walking surfaces for prime contractors serving the Nashville Electric Service in Tennessee. The scope of work specifically requires the supply of 3M-AUTO 19282 Safety Walk Black Medium Grade rolls, or an approved equivalent, measuring 6 inches by 60 feet. The selected supplier is responsible for the physical delivery of the grip tape rolls to the designated facility in Nashville, ensuring strict adherence to established delivery timelines. This opportunity is categorized under NAICS code 423830 and is managed through the Nashville Electric Service vendor portal.
Industrial Machinery and Equipment Merchant Wholesalers

POSTED

5 days ago

DEADLINE

in 1 day
View Details
NAICS: 334418
New
SLED
Supply of 3P.S.T. Back Connected Knife SwitchesThis subcontract involves the supply and delivery of industrial electrical knife switches for prime contractors working on Nashville Electric Service projects in Nashville. The scope of work specifically requires the provision of AVO MULT MTS S-203-D-B units configured as 3P.S.T. back connected. These units must include BC barriers, ganged handles, dividers, and TBT-26 long studs, though mounting bars are excluded from the delivery requirements. The procurement is categorized under NAICS code 334418. Interested parties should note that the posting date is October 23, 2026, with a response deadline set for October 30, 2026. All physical 3P knife switch units must be delivered in accordance with the specified technical configurations to support the agency's infrastructure projects.
Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

5 days ago

DEADLINE

in 2 days
View Details
NAICS: 314121
New
SLED
Lineman's Rubber Glove ProtectorsThis subcontract involves the manufacture and supply of size 9 leather protector gloves for prime contractors working on Nashville Electric Service safety equipment projects. The gloves must be designed for use with 5,000 volt rubber gloves and strictly adhere to Federal Specification KK-L-170C and ASTM Specification F696-91. Each pair must be individually plastic-bagged and stamped on the cuff with the rubber glove hand size, the manufacturer name, and the NES designation. The scope of work requires the delivery of 24 pairs of these marked protector gloves to Nashville. This opportunity is categorized under NAICS code 314121 and is managed by the Nashville Electric Service in Tennessee. Interested parties should note the response deadline of October 30, 2026.
Curtain and Drapery Mills

POSTED

5 days ago

DEADLINE

in 2 days
View Details
NAICS: 484220
New
SLED
Flatbed Hauling and Unloading ServicesThis subcontract for Flatbed Hauling and Unloading Services involves the transportation and delivery of 400 utility poles to various yards in Nashville, Tennessee, in support of Nashville Electric Service utility projects. The selected provider will perform truck freight transportation using flatbeds, with operations scheduled between 6:30 AM and 2:30 PM CST. The scope of work requires the use of specialized equipment for on-site unloading, including crane trucks, knuckle booms, or heavy-duty forklifts. To qualify, personnel must possess a valid CDL and proper equipment operator certification. Interested parties must respond by November 5, 2026.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

5 days ago

DEADLINE

in 8 days
View Details
NAICS: 321911
New
SLED
Treated Wooden Utility Pole SupplierThis subcontract agreement establishes the requirements for a supplier to provide treated wooden utility poles for prime contractors working on Nashville Electric Service projects in Nashville. The scope of work involves the manufacture and delivery of 400 40-foot Class 4 poles constructed from either Douglas Fir or Southern Pine. All materials must adhere strictly to NES Specifications 33-151R13 or 33-252R10. The supplier is responsible for the complete production process, including roofing and gaining according to NES Drawing 910 and the application of necessary chemical preservation treatments. The contract concludes upon the successful delivery of the 400 finished and processed poles. Interested parties must respond by November 5, 2026.
Wood Window and Door Manufacturing

POSTED

5 days ago

DEADLINE

in 8 days
View Details
NAICS: 332312
New
SLED
Steel Utility Pole Supplier (60ft Class H3)This subcontract agreement establishes the requirements for a supplier to provide hot-dipped galvanized steel poles for prime contractors working on Nashville Electric Service utility projects in Nashville. The supplier is responsible for manufacturing 60-foot poles that meet Class H3 equivalent standards, specifically maintaining a minimum capacity of 0243 ft-kips at ground level. The scope of work includes providing 1 inch jacking nuts and bolts for both the top and bottom halves of the poles, with a strict construction limit of no more than two sections. The selected supplier is responsible for the final delivery of the finished steel poles to Nashville Electric Service.
Fabricated Structural Metal Manufacturing

POSTED

5 days ago

DEADLINE

in 8 days
View Details
NAICS: 484220
New
SLED
Flatbed Delivery ServicesThis subcontract for Flatbed Delivery Services involves the transportation of 200 fiberglass crossarms for prime contractors working on Nashville Electric Service utility projects. The selected provider will be responsible for hauling these units from the manufacturer to designated delivery points in Nashville using an open flatbed truck or trailer as specified in the statement of work. To qualify for this engagement, the contractor must possess standard commercial trucking licenses and the required insurance coverage. The solicitation was posted on October 23, 2026, with a response deadline of November 3, 2026. This project falls under NAICS code 484220 for specialized freight trucking.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

5 days ago

DEADLINE

in 6 days
View Details
NAICS: 326121
New
SLED
Tubular Fiberglass Crossarm SupplierThis subcontract agreement establishes the supply of 200 ten-foot tubular fiberglass crossarms for prime contractors working on Nashville Electric Service utility projects in Nashville. The supplier is responsible for manufacturing components that adhere to NES Specification ESI-4-E, with dimensions ranging from 3 1/2" x 4 1/2" to 5" x 7". The scope of work includes the provision of braceless mounting assemblies utilizing two 5/8" diameter bolts with vertical spacing of either 8" or 12". The contract is categorized under NAICS code 326121 and requires the delivery of the full quantity of crossarms and their corresponding mounting assemblies.
Unlaminated Plastics Profile Shape Manufacturing

POSTED

5 days ago

DEADLINE

in 6 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

NAICS: 332312
Closed
SLED
Steel Poles
Solicitation # Z5162
Nashville Electric Service

POSTED

about 2 months ago

CLOSED

about 1 month ago
View Details
NAICS: 332312
Closed
SLED
Metal Fabrications
Tompkins County

POSTED

about 2 months ago

CLOSED

26 days ago
View Details
NAICS: 332312
Closed
SLED
Specialty Piping Support Supplier
Liberty County Board of Education

POSTED

about 2 months ago

CLOSED

19 days ago
View Details
NAICS: 332312
Closed
SLED
Traffic Control Cabinet and Shelf Supplier
Fayette County Board of Commissioners

POSTED

about 2 months ago

CLOSED

about 1 month ago
View Details
NAICS: 332312
Closed
SLED
Vehicle Barrier Material Supply
MILDV - Military Division

POSTED

about 2 months ago

CLOSED

about 1 month ago
View Details
NAICS: 332312
Closed
SLED
Site Furnishings Supply & Installation
Facilitiies

POSTED

about 2 months ago

CLOSED

21 days ago
View Details
NAICS: 332312
Closed
SLED
Metal Roofing Material Supply
Iowa

POSTED

about 2 months ago

CLOSED

28 days ago
View Details
NAICS: 332312
Closed
SLED
Steel Storage Tank Manufacturer/Supplier
MPTAP

POSTED

about 2 months ago

CLOSED

about 1 month ago
View Details
NAICS: 332312
Closed
SLED
Steel Fabrication & Welding
Odot-district 1, Dot-dept Of Transportation

POSTED

about 2 months ago

CLOSED

22 days ago
View Details
NAICS: 332312
Closed
SLED
Metal Fabrications & Welding
Public Works

POSTED

about 2 months ago

CLOSED

20 days ago
View Details
NAICS: 332312
Closed
SLED
2.5" Square Steel Post Supplier
City of San Clemente

POSTED

about 2 months ago

CLOSED

23 days ago
View Details
NAICS: 332312
Closed
SLED
Traffic Signal Pole Manufacturer/Supplier
City of Fresno

POSTED

about 2 months ago

CLOSED

29 days ago
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS