Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Suspension Clamp

Active

Z5435State & Local

Response Deadline11/02/2026, 08:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Nashville Electric Service has issued Request For Bid Z5435 for the procurement of 200 units of 2-bolt straight suspension cable clamps. The required hardware must feature a three-bolt design with two bolts included, a clamp length of 5-3/4 inches, and accommodate a strand diameter between 1/4 inch and 7/16 inch. To ensure technical compliance, the agency will only accept specific part numbers from approved manufacturers: Maclean J1096, Cooper DJ2C7, or Hubbell 7903. Alternate brands are strictly prohibited for this inquiry. Bids must be submitted through the Bid Center by 2:00 pm local time on November 2, 2026. Offerors are required to state their earliest delivery timeframe in calendar days, as delivery speed may be a determining factor in the award decision. The primary procurement contact for this solicitation is Tiffany Caruthers. Any discrepancies between the ordering description and part numbers must be clarified with the buyer prior to the closing date.

General Info

Nashville Electric Service seeks 200 specific cable clamps by November 2, 2026.

Agency

Tennessee → Nashville Electric Service

NAICS

332510 - Hardware Manufacturing

Place of Performance

Nashville, TN, USA

Set-Aside

NONE

Documents

1

NES RFB Z5435 - Suspension Clamps

rfb

High

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation

PostedOct 27

Solicitation

Response DeadlineNov 2

Submission deadline

Response Deadline

11/02/2026, 08:00:00 PM UTCin 5 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyTennessee → Nashville Electric Service

Contacts1 person available

OfficeNashville, TN, USA

Organization / AgencyTennessee → Nashville Electric Service

Office AddressNashville, TN, USA

Contacts

Tiffany CaruthersProcurement Contact

contact@example.gov

+1 (555) 000-0000

Full Description

Show more

EA CLAMPSUSP MESS 2-BOLT STRAIGHT SUSPENSIONCLAMP, CABLE. THREEBOLT WITH TWO BOLTS INCLUDED. STRAND DIAMETER: 1/4"TO 7/16" CLAMPLENGTH: 5-3/4" MACLEAN J1096 COOPER DJ2C7 HUBBEL 7903 Stateyour earliest delivery IN CALENDAR DAYS: _ DELIVERY MAY BE CONSIDEREDIN THE AWARDOF THIS BID. _ Alternate brands will not be accepted on this inquiry. To have your product evaluated for future consideration, contact the buyerlisted in this RFB. _ In the eventof a discrepancy between the ordering description and part number, it is the responsibility of the vendor to contact the buyerfor clarification before the published CLOSE DATE. _ Note: This bid must be submitted usingthe Bid Center and must be received by 2:00 pm localtime on the published CLOSE DATE. _

Similar Contracts

Same NAICS industry code

Extension Drawer Slide Supplier

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

Supply of Spring Tension WashersThis subcontract involves the manufacture or sourcing of 2,431 spring tension washers for the Department of Defense, specifically supporting the DLA Weapons Support Nuclear Reactor Program. The contractor is responsible for ensuring all units meet strict government specifications and must prepare the items for Government-Arranged Transportation under the First Destination Transportation program. Performance will take place at Hill AFB. Interested parties must be registered in SAM.gov to be eligible for this requirement. The solicitation was posted on October 28, 2026, with a response deadline of November 9, 2026. The contract falls under NAICS code 332510 and requires the delivery of all units by the specified required delivery date.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 2 hours ago

DEADLINE

Manufacturing and Supply of Spacer, Sleeve (NSN 5365010716787)This subcontract involves the manufacture and supply of 6,250 units of Spacer, Sleeve (NSN 5365010716787) for prime contractors supporting the Department of Defense, specifically the DLA Weapons Support ASC Supplier Oper AE and AF Div. All parts must be produced in accordance with the DLA Master List of Technical and Quality Requirements and delivered FOB Origin from New Cumberland. The contractor is required to strictly adhere to the Buy American Act and the Berry Amendment. Additionally, all packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and PPP-H-1581 standards. The project falls under NAICS code 332510.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 2 hours ago

DEADLINE

Manufacture and Supply of Access Covers (NSN 5340-01-362-5961)This subcontract involves the manufacture and supply of 37 Access Covers, identified by NSN 5340-01-362-5961, for prime contractors supporting the DLA Weapons Support Land Supply Chain. The selected provider must fabricate the covers according to the provided technical data package, with a strict requirement that no hexavalent chromium or Class I Ozone Depleting Substances are utilized during production. All hardware must be packaged and labeled in accordance with ASTM D3951 and MIL-STD-129 standards before being delivered to DLA Distribution San Joaquin in Tracy, California. The project falls under NAICS code 332510 and is managed by the Department of Defense.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

Mounting Bracket Supply (NSN 5340016531699)This subcontract involves the manufacture or sourcing of mounting brackets under NSN 5340016531699 for prime contractors supporting the DLA Weapons Support Land Supply Chain. The selected provider must ensure all items meet specific technical and quality requirements and are packaged according to ASTM D3951 standards. Performance will take place in Fort Stewart, with delivery coordinated under FOB Origin terms for Government-Arranged Transportation. Eligible candidates must maintain active SAM registration and hold Small Business status. The contract falls under NAICS code 332510, with a response deadline set for November 9, 2026. The primary responsibility of the subcontractor is the delivery of physical mounting brackets to the designated origin point.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

Trailer Components and Hardware SupplyThis subcontract for Trailer Components and Hardware Supply involves providing raw materials, axles, wheels, and specialized hardware to prime contractors for DLA Troop Support equipment projects. The scope of work includes sourcing industrial-grade trailer components and ensuring all materials comply with Buy American Act domestic origin requirements. Additionally, the supplier is responsible for providing Safety Data Sheets for hazardous materials in accordance with Federal Standard No. 313, delivering items as either bulk materials or component kits to the prime manufacturer. Managed under the Department of Defense for Construction & Equipment Manu & Con, the contract is categorized under NAICS code 332510. The place of performance is located at Hill AFB, zip code 84056-5734. The solicitation was posted on October 28, 2026, with a response deadline of November 9, 2026.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 2 hours ago

DEADLINE

Manufacturing of Retaining Ring (NSN 5325-01-203-8112)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

Manufacturer of Grooved Pins (NSN 5315-00-957-7700)

Defense Logistics Agency

POSTED

about 2 hours ago

DEADLINE

Manufacturer of Solid Rivets (NAS1200-6-9)This subcontract involves the manufacture of 1,088 solid rivets for prime contractors delivering to the DLA Weapons Support ASC Commodities Division. The rivets must be fabricated according to part standard NAS1200-6-9 and NSN 5320009277976. Production must utilize traditional manufacturing processes, as additive manufacturing is strictly prohibited. The selected provider must possess precision machining equipment and maintain a quality management system that complies with either SAE AS9003 or ISO 9001 standards. Performance for this Department of Defense contract will take place at Robins Air Force Base. The response deadline for this opportunity is November 5, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

Supplier of Security Rings (NSN 3615-01-447-0047)This subcontract involves the manufacture or sourcing of 10 security rings under NSN 3615-01-447-0047 to support prime contractors delivering DLA Troop Support supply contracts. The selected provider must ensure all units strictly adhere to the technical specifications associated with the identified national stock number and deliver the items FOB Origin. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 332510 for the Department of Defense. Performance will take place in San Diego, California, with a response deadline set for November 9, 2026.

CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

about 2 hours ago

DEADLINE

Utility Access Door SupplierThis subcontract opportunity is for a supplier to fabricate or procure new and unused utility access doors, specifically the PWP MOD 1 CMU Improved Door under NSN 5340-01-663-5150. The selected provider will support prime contractors fulfilling DLA supply contracts for the Department of Defense, specifically the DLA Weapons Support Land Supply Chain. Key requirements include supporting the Contractor First Article Test in accordance with FAR 52.209-3 and adhering to Section 889 telecommunications disclosures. The project is designated as a Total Small Business Set-Aside under NAICS code 332510. Interested parties must submit their responses by November 28, 2026, for performance located in zip code 17070-5002.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

in about 1 month

Specialized End-Fittings and Hardware SupplyThis HUBZone set-aside subcontract, titled Specialized End-Fittings and Hardware Supply, involves the production and delivery of metal end-fittings, shackles, and connectors for prime contractors supporting DLA Troop Support. The scope of work requires the forging or machining of hardware to specific TDP dimensions, the application of protective coatings, and the provision of material certifications for all load-bearing components to ensure compliance with Berry Amendment domestic origin requirements. Managed by the Department of Defense under NAICS code 332510, the contract is being handled by Construction & Equipment Manu & Con. Performance will take place in New Cumberland, Pennsylvania. Interested parties must respond by November 9, 2026, to provide the necessary certified metal hardware.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 2 hours ago

DEADLINE

More opportunities from Tennessee → Nashville Electric Service

Same awarding agency

Type N Female Connectors for 7/8" Coaxial CableThis subcontract involves the supply of 12 specialized Type N female connectors, part number NF-RA78-016, for prime contractors working on Nashville Electric Service projects. These connectors must be compatible with RLF, RLK, and RAY78-50A series cables and feature specific technical requirements, including brass bodies with tri-metal plating, silver-plated copper contacts, 50 ohm impedance, and an IP68 waterproof rating. The order consists of straight-sealing connectors equipped with shrinking sleeves. The deliverables are to be shipped to Nashville, Tennessee. The opportunity was posted on October 28, 2026, with a response deadline of November 3, 2026. This procurement falls under NAICS code 334417.

Electronic Connector Manufacturing

POSTED

about 14 hours ago

DEADLINE

Supply of Solderless Ring-Tongue TerminalsThis subcontract involves the procurement and delivery of 8,000 solderless, ring-tongue, vinyl insulated electrical terminals for prime contractors working on Nashville Electric Service projects. The required specifications are #12-10 AWG with a #10 stud, and the items must be packaged in quantities of 500 per box. Eligible suppliers must be authorized distributors of either Panduit or Mecatrac brands, specifically providing part numbers PV10-10R-L, PV1010RD, or BE6M53D. The performance of this contract will take place in Nashville, Tennessee, with a response deadline set for November 4, 2026.

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

about 14 hours ago

DEADLINE

Solderless Terminal

Solicitation # Z5437

Nashville Electric Service is soliciting bids under solicitation Z5437 for solderless, ring-tongue, vinyl insulated terminals featuring #12-10 AWG and #10 stud specifications. The required items must be packaged 500 units per box. Only specific part numbers from approved manufacturers are acceptable, specifically Panduit PV10-10R-L, Panduit PV1010RD, or Mecatrac BE6M53D; alternate brands will not be accepted for this inquiry. Bids must be submitted through the Bid Center by 2:00 pm local time on November 4, 2026. When submitting, vendors must state their earliest delivery time in calendar days, as delivery speed may be a factor in the award decision. For any discrepancies between ordering descriptions and part numbers, vendors are responsible for contacting the procurement lead, Shanna Faulk, for clarification before the closing date.

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

about 14 hours ago

DEADLINE

Solicitation # Z5442

Nashville Electric Service has issued solicitation Z5442 for the procurement of Type N female connectors for 7/8 inch foil and radiating coaxial cables, specifically part number NF-RA78-016. These connectors must be compatible with RLF, RLK, and RAY78-50A series, featuring a 50 ohm nominal impedance, a maximum frequency of 3.7 GHz, and an IP68 waterproof rating. Technical specifications require a brass body with tri-metal plating and silver-plated copper for both inner and outer contacts. The connectors are straight-sealing with a shrinking sleeve, measuring 78.4 mm in length with an outer diameter of 34 mm and a weight of 0.18 kg. Bids must be submitted through the Bid Center by 2:00 pm local time on November 3, 2026. The award process will strictly prohibit alternate brands, and bidders are required to state their earliest delivery time in calendar days, as delivery speed may be a determining factor in the award. It is the vendor's responsibility to resolve any discrepancies between the part number and description with the procurement contact, Alan Martinez, prior to the closing date. Performance and delivery will take place in Nashville, Tennessee.

Electronic Connector Manufacturing

POSTED

about 14 hours ago

DEADLINE

Supplier of 10-Pole Test Switches (C-C C-C C-C C-C P-P)This subcontract agreement involves the procurement and delivery of 20 units of 10-pole test switches for prime contractors working on Nashville Electric Service projects in Nashville. The required hardware must be back-connected switches featuring plastic covers and compatibility with a 1 1/2 inch panel, specifically configured in a C-C C-C C-C C-C P-P arrangement. To ensure technical compliance, the supplier must provide approved part numbers from MEGA BT701, STATES FMS-10ER, or ABB AUTO 837A407G01. The contract is categorized under NAICS code 423610, with a response deadline set for October 30, 2026.

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

DEADLINE

Supplier of 10-Pole Test Switches (P P P P P P P P T T)This subcontract agreement involves the procurement and delivery of 30 units of 10-pole test switches for prime contractors working on Nashville Electric Service projects in Nashville. The required hardware must be back-connected switches featuring plastic covers and compatibility with a 1 1/2 inch panel, specifically configured in a P P P P P P P P T T arrangement. To ensure technical compliance, the supplier must provide approved part numbers from MEGA BT103, ABB AUTO 1586C42G23, or STATES FMS-10FC. The contract is categorized under NAICS code 423610 and was posted on October 27, 2026, with a response deadline of October 30, 2026.

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

DEADLINE

Specialized Flatbed/Open-Top Transport for Steel PolesThis subcontract involves the specialized transport of five 30-foot steel poles for prime contractors working on Nashville Electric Service projects in Nashville. The selected provider must utilize an open-top vehicle to facilitate efficient unloading and is strictly required to keep the poles wrapped throughout transit to protect the factory-applied dark bronze finish. The primary objective is the delivery of the shafts to the designated site in a condition that preserves the integrity of the factory finish. This opportunity falls under NAICS code 484220, with a response deadline set for November 3, 2026.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Supply of Standard Steel Square Straight Shafts (30')This subcontract involves the manufacture and delivery of five 30-foot standard steel square straight shafts for prime contractors working on Nashville Electric Service projects in Nashville. Each shaft must be constructed with four-hole anchor bases, two detachable 2 inch IPS horizontal tenons, and a factory-applied dark bronze finish. To ensure structural integrity, all poles are required to comply with NESC 90 MPH wind load requirements. The completed shafts must be delivered wrapped to protect the finish. This procurement opportunity is categorized under NAICS code 332323, with a response deadline set for November 3, 2026.

Ornamental and Architectural Metal Work Manufacturing

POSTED

DEADLINE

Supply of 2-Bolt Straight Suspension Cable ClampsThis subcontract involves the procurement and delivery of 200 specialized 2-bolt straight suspension cable clamps for prime contractors working on Nashville Electric Service projects. The required hardware must be 5-3/4 inches in length with a strand diameter ranging from 1/4 to 7/16 inches. To ensure quality and compatibility, the clamps must be sourced from approved manufacturers, specifically Maclean, Cooper, or Hubbell. The contract is managed by the Nashville Electric Service in Tennessee, with the place of performance located in Nashville. Interested parties must adhere to the response deadline of November 2, 2026. The scope of work is strictly limited to the supply and delivery of the specified units to the designated agency location.

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

DEADLINE

Supply of Machine Bolts (5/8" x 12")This subcontract involves the procurement of 2,650 industrial-grade machine bolts measuring 5/8" x 12" to support prime contractors on Nashville Electric Service projects. The selected provider must source these components exclusively from approved manufacturers to ensure quality and compliance with project standards. All items must be delivered to Nashville and packaged in standard cartons as specified in the solicitation, with bulk packing strictly prohibited. The contract falls under NAICS code 332722 and requires fulfillment according to the guidelines set by the Nashville Electric Service.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

DEADLINE

Supply of Carriage Bolts (3/8" x 4 1/2")This subcontract involves the sourcing and delivery of 2,250 industrial-grade carriage bolts measuring 3/8" x 4 1/2" for prime contractors working on Nashville Electric Service projects. The contractor is required to procure these units exclusively from approved manufacturers to ensure quality and compliance with project standards. All items must be delivered to Nashville and packaged in standard cartons as specified in the solicitation requirements, with bulk packing strictly prohibited. The contract falls under NAICS code 332722 and is managed through the Nashville Electric Service procurement system.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

DEADLINE

Solicitation # Z5434

Solicitation Z5434 is a Request for Bid issued by the Nashville Electric Service in Tennessee for the procurement of 10-pole test switches. The requirement consists of two specific items: 30 units of 10-pole test switches with a P P P P P P P P T T configuration and 20 units with a C-C C-C C-C C-C P-P configuration. Both items must be back connected, include a plastic cover, and feature hardware for a 1 1/2 inch panel. Approved manufacturers and part numbers include MEGA BT103, ABB AUTO 1586C42G23, and STATES FMS-10FC for the first item, and MEGA BT701, STATES FMS-10ER, and ABB AUTO 837A407G01 for the second. Bids must be submitted through the Bid Center by 2:00 pm local time on October 30, 2026. Alternate brands are not accepted for this inquiry. Vendors are required to state their earliest delivery time in calendar days, as delivery speed may be a factor in the award decision. For any discrepancies between part numbers and descriptions, vendors must contact the procurement lead, Shanna Faulk, for clarification prior to the closing date.

Switchgear and Switchboard Apparatus Manufacturing

POSTED

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Wire Brush Wafers Supply

Capital Region Airport Commission

POSTED

DEADLINE

Supply of Figure 8 Swing Links (30K lbs)

Nashville Electric Service

POSTED

DEADLINE

Supply of Brass Washers (#10-L)

Nashville Electric Service

POSTED

CLOSED

about 24 hours ago

2026.098-ITQ Steel Sign Post and Hardware

Solicitation # 2026.098-ITQ

POSTED

DEADLINE

Industrial Control Valve Supplier

DPS/Solid Waste Department of City of Toledo

POSTED

DEADLINE

Prisoner Cage Fabrication and Installation

OSD09 - OSD OVM

POSTED

DEADLINE

Commercial Door Hardware Supplier/Installer

POSTED

DEADLINE

Carbide-Tipped Snow Plow Blade Manufacturer

Das Purchasing (statewide Bids & Contracts)

POSTED

DEADLINE

Cast Iron Frames, Covers, and Grates Supply

Town of Needham

POSTED

DEADLINE

Combination Lock Systems with Master Keying

State of California

POSTED

CLOSED

about 18 hours ago

Supply of Hot Dipped Galvanized Double Arming Bolts

Nashville Electric Service

POSTED

CLOSED

Supplier of Breakaway Device Post Receivers

POSTED

CLOSED

about 4 hours ago

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS