Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Structural Repairs and General Construction

Active
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Comprehensive structural repairs are required for fire training buildings 17903 and 17904 at Holloman Air Force Base, including demolition, framing, roofing, and full restoration work to meet Department of Defense standards and original design specifications. The scope encompasses all necessary construction activities to return the facilities to full operational capacity while adhering strictly to military construction guidelines and safety protocols. The contract is a Small Business Set-Aside under the NAICS code 236220 for Construction of Commercial and Institutional Buildings, ensuring participation by certified small businesses. The opportunity was posted on July 1, 2026, with proposals due by August 14, 2026, and is managed by the Department of Defense under FA4801 49 Cons Pk, with performance exclusively located at the Holloman Air Force Base facility in ZIP code 88330.

General Info

Small business set-aside for fire training building repairs at Holloman AFB, including demolition, framing, roofing, and full restoration.

Agency

Department Of Defense → FA4801 49 Cons PkView Agency

NAICS

236220 - Commercial and Institutional Building ConstructionView NAICS

Place of Performance

Holloman Air Force Base, NM, 88330, USA

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

Posted

subcontract

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → FA4801 49 Cons Pk
ContactsNo contacts available
OfficeN/A
Organization / Agency
Department Of Defense → FA4801 49 Cons Pk
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Perform comprehensive structural repairs to fire training buildings 17903 and 17904, including demolition, framing, roofing, and restoration in compliance with DoD standards and original specifications.

Similar Contracts

Same NAICS industry code

NAICS: 236220
New
SLED
Checkpoint Security Grill Replacement - DBBThe contract seeks a contractor to deliver comprehensive design, permitting, and construction services for replacing the Checkpoint 5 security grill at the Port of Seattle. The scope encompasses a full lifecycle approach beginning with site assessment and continuing through the preparation of design drawings and specifications that comply with TSA CRPG Section 3-5 standards. The contractor must submit all documentation for regulatory review and secure necessary permits, followed by the safe removal and proper disposal of the existing grill. New system fabrication and installation are required, with seamless integration into existing structural, electrical, and security badge access systems. All work must be conducted with strict attention to operational continuity, minimizing disruption to airport security functions. Coordination with multiple stakeholders is mandatory to ensure compliance with federal, state, and local regulations while maintaining the integrity of the airport’s security posture. The procurement is classified under NAICS code 236220 for commercial and institutional building construction and is managed by the Aviation Project Management Group under the Port of Seattle. Primary contact for inquiries is Yanet Maldonado, with Collette Deardorff serving as the project manager. The opportunity was posted on July 26, 2026, and the contract is structured under a design-bid-build delivery method. All work must be performed at the port’s facility, with no specified set-aside provisions. Contractors are expected to engage proactively with project representatives to align on timeline, quality, and compliance requirements throughout all phases of the project.
Aviation Project Management Group

POSTED

about 4 hours ago

DEADLINE

N/A
View Details
NAICS: 236220
New
SLED
Rental Car Facility (RCF) Customer Service Building (CSB) Re-DemisingThe Port of Seattle’s Aviation Project Management Group is preparing to revise the base building infrastructure of the Rental Car Facility Customer Service Building to support a new Concession Agreement and enable tenant construction commencing June 1, 2027. The scope includes updating wayfinding signage to reflect new tenant locations, constructing a new break room and flex space for transit operations, renovating existing restrooms in the Customer Service Building, replacing outdated car wash equipment in the Quick Turn Around areas, installing new expansion joints on the 5th Floor plaza areas, and performing structural repairs to address cracking and repair post-tensioned cables. These upgrades are designed to modernize facility functionality and ensure compliance with future operational demands under the upcoming concession arrangement. All work is centered on the Customer Service Building within the Rental Car Facility, with the Port of Seattle acting as the contracting authority. The solicitation is currently forecasted, with no formal solicitation number assigned yet, and the NAICS code 236220 indicates commercial and institutional building construction. Primary point of contact is Angela Peterson, with Julia Ruzon serving as Project Manager. Interested parties should monitor the official Port of Seattle portal for formal solicitation release, as this project represents a significant capital improvement initiative aimed at enhancing tenant experience and long-term facility integrity.
Aviation Project Management Group

POSTED

about 4 hours ago

DEADLINE

N/A
View Details
NAICS: 236220
New
Federal
RFQ 19KU2026Q0013 - AEWA Door & Tile Installation Upgrade projectThe RFQ 19KU2026Q0013 seeks qualified contractors to perform the AEWA Door & Tile Installation Upgrade project at the U.S. Embassy in Kuwait under a fixed-price contract award, with selection based on the lowest technically acceptable bid. A mandatory site visit is scheduled for August 5, 2026, at 09:30 AM Kuwait time, and failure to conduct a thorough on-site assessment prior to submission renders the contractor fully responsible for any errors, omissions, or cost miscalculations in the proposal, including the Bill of Materials and Bill of Quantities. All quotations must be submitted electronically by August 16, 2026, at 10:00 AM Kuwait local time, with emails titled correctly to ensure proper processing. Proposals must include the completed SF-1442 form, pricing in Section A, all required representations and certifications in Section L, and supporting documentation from Attachment A and other applicable sections. Offerors must either hold an active SAM registration and provide their Unique Entity Identifier or, if not registered, complete FAR 52.204-90, with the requirement to update this annually if option periods are exercised. Questions must be submitted by August 8, 2026, at 10:00 AM Kuwait time; no inquiries will be accepted after this deadline. The project falls under NAICS code 236220 and is administered by the U.S. Department of State through the Embassy in Kuwait, with no set-aside provisions applied.
US Embassy Kuwait

POSTED

about 10 hours ago

DEADLINE

in 20 days
View Details
NAICS: 236220
New
Federal
Z2DA--FY27 NRM | 557-23-104 | Replace Boiler Plant Steam Boilers | Construction (VA-27-00003633)The Department of Veterans Affairs, through Network Contracting Office 07, is conducting market research for the replacement of three steam boilers at Building 27 of the Carl Vinson VA Medical Center in Dublin, Georgia. This project, classified under NAICS code 236220 with a magnitude between $20 million and $50 million, will require a contractor to manage and execute the full scope of construction work including hazardous material abatement, demolition of existing systems, installation of new boilers, piping, fuel tanks, emergency generators, and related site work—all in accordance with design drawings and specifications provided by an independent Architect-Engineer. The work must comply with all federal, state, and local regulations, and wage determinations for Laurens County, Georgia will apply. The project is anticipated to be awarded as a firm-fixed-price contract following a competitive process, either through an RFP under FAR Part 15 or an IFB under FAR Part 14, with the final procurement method to be determined after market research. The performance period is set at 730 days from the Notice to Proceed, and the contract is planned to be set aside exclusively for Service-Disabled Veteran Owned Small Businesses. Interested contractors must submit a capabilities statement no longer than four single-spaced pages in a single PDF under 4MB, including company details, UEI, size certification under NAICS 236220, bonding capacity sufficient for the project value, and evidence of past performance on at least three comparable medical facility construction projects completed within the last seven years. Submissions must include specific project names, owners, contact information, dollar values, start and completion dates, and a description of technical expertise and key personnel relevant to the scope. Responses must be emailed as a properly formatted PDF by August 7, 2026, at 3:00 PM EST to the designated VA contacts with the correct subject line reference. No bids or proposals are being solicited at this time; this is purely a market research effort, and respondents should not expect evaluation feedback, reimbursement, or a solicitation unless posted on SAM.gov in the first quarter of FY27. Hard copies and phone inquiries are not accepted, and compliance with submission guidelines is mandatory for consideration.
247-NETWORK Contract Office 7 (36C247)

POSTED

1 day ago

DEADLINE

in 12 days
View Details

More opportunities from Department Of Defense → FA4801 49 Cons Pk

Same awarding agency

NAICS: 333310
New
Federal
Small Arms Parts Management CribThe contract seeks a Small Arms Parts Management Crib system designated as the AutoVend TX750, featuring a dispensing crib with a 19-inch touchscreen, a maximum storage capacity of 1,856 bins, an integrated management PC with licensed software, and 82 automated modular locker doors. The system must include a combat arms database with configured parts bins, 620 weapon parts cups, and the ability to generate two custom reports for operational tracking. The vendor is required to deliver, install, and provide comprehensive training on the system, ensuring full operational readiness at the performance location. A five-year standard Department of Defense warranty is mandatory for all components to ensure long-term reliability and support. This solicitation, identified as F2E3SF5343A001, is a Total Small Business Set-Aside under NAICS code 333310 and is managed by the Department of Defense through the FA4801 49 Cons Pk office at Holloman Air Force Base, New Mexico. Proposals are due by June 29, 2026, with the solicitation posted on July 23, 2026. Primary point of contact is Caroline Deal, reachable via email or phone, with secondary support provided by Johnnie Walker. All responses must align with the technical specifications and delivery requirements outlined, and performance is exclusively targeted at Holloman Air Force Base, ensuring the system integrates seamlessly with current DoD small arms maintenance and inventory protocols.
Commercial and Service Industry Machinery Manufacturing

POSTED

3 days ago

DEADLINE

in 3 days
View Details
NAICS: 238210
Federal
Electrical Systems Repair and ModernizationThe contract titled Electrical Systems Repair and Modernization is a subcontract set aside exclusively for small businesses under the SBA Total Small Business Set-Aside provision, targeting the modernization and maintenance of electrical infrastructure at Holloman Air Force Base with a zip code of 88330. It encompasses a broad scope of work including the repair, replacement, or upgrade of critical electrical systems such as wiring, circuit panels, lighting, grounding, and specialized components unique to fire training environments, notably ignition and sensor systems. The North American Industry Classification System code 238210 applies, indicating the work falls under electrical contracting services. The opportunity was posted on July 1, 2026, with a mandatory response deadline of August 14, 2026. The contracting agency is the Department of Defense under the FA4801 49 Cons Pk office, and the performance location is specifically tied to Holloman Air Force Base. All work must be performed by a qualified small business eligible under the SBA guidelines, ensuring compliance with federal contracting set-aside requirements for small business participation. The project requires technical expertise in both standard electrical systems and mission-specific fire training equipment to ensure operational readiness and safety standards are met.
Electrical Contractors and Other Wiring Installation Contractors

POSTED

25 days ago

DEADLINE

in 18 days
View Details
NAICS: 811210
Federal
Notice of Intent to Sole Source – TowFLEXX Electric Tower RepairsHolloman Air Force Base plans to award a sole-source, firm-fixed-price contract to TugFIXX LLP for TowFLEXX Electric Tower Repair Services under the authority of RFO 6.103-1, citing that no other source can meet the agency’s requirements. The contract is designated as a total small business set-aside, and TugFIXX LLP is the only entity authorized by the original equipment manufacturer to perform this work due to its exclusive access to proprietary parts, certified technical manuals, and specialized data essential for safe and compliant repairs. No other vendor has the legal or technical capability to fulfill the requirement, making competition ineffective. The notice explicitly states this is not a solicitation for competitive bids, but responsible parties may submit capability statements to demonstrate their authority to provide the same proprietary OEM parts and services without violating exclusive agreements. Submissions must include verifiable proof of OEM authorization and access to required technical documentation. All information received will only be used to assess future procurement options, and the government will not compensate respondents. Proposals must be emailed to the designated Contracting Officer and Contract Specialist by 1400 MDT on June 1, 2026, with no guarantee that the government will pursue competitive bidding even if other qualified vendors respond.
Electronic and Precision Equipment Repair and Maintenance

POSTED

2 months ago

DEADLINE

N/A
View Details