Top

Structural Steel Fabrication and Erection

Active

State & Local

Response Deadline10/07/2026, 03:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

General Info

Agency

Connecticut → DAS ProcurementView Agency

NAICS

332312 - Fabricated Structural Metal ManufacturingView NAICS

Place of Performance

CT, USA

Set-Aside

NONE

Documents

This scope was carved out of B027-10.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Merimere Water Tank Rehabilitation

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 28

subcontract

Response DeadlineOct 7

Submission deadline

Response Deadline

10/07/2026, 03:00:00 PM UTCin about 1 month

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

AgencyConnecticut → DAS Procurement

ContactsNo contacts available

OfficeN/A

Organization / Agency

Connecticut → DAS Procurement

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Fabrication and on-site assembly of structural steel members for buildings or bridges.

Similar Contracts

Same NAICS industry code

NAICS: 332312

New

ACE-0620-1199-00 Tower Design and Fabrication for Various RCAG/RTR Sites (TXK-A, GRI-B, and ARG)

Solicitation # ace-0620-1199-00-tower-design-fabrication-various-rcagrtr-sites-txk-gri-b-arg

Parsons Corporation is soliciting bids for the design, fabrication, and delivery of towers for various RCAG/RTR sites located in Texas, Nebraska, and Arkansas, specifically targeting the TXK-A, GRI-B, and ARG locations. This opportunity is open to a wide range of small business set-asides, including SDB, WOSB, HUBZone, and SDVOSB entities, under NAICS code 332312. Interested offerors must be properly bonded and insured to be eligible for the contract. Responses are due by September 25, 2026, and the primary point of contact for this solicitation is Thomas Sheehan.

POSTED

DEADLINE

SCREW, CLOSE TOLERANCE

Solicitation # SPE4A6-26-T-21LK

Solicitation SPE4A6-26-T-21LK, issued by the DLA Aviation ASC Commodities Division on August 21, 2026, is a fully competitive request for the procurement of 12,000 close tolerance screws, part number NAS1580C6T14. Designated as a critical application item, the screws must conform to AIA/NAS NAS1580 and NAS4003 standards, with dimensions and tolerances adhering to ASME Y14.5. The procurement is not a small business set-aside and requires delivery to the DLA Distribution IDSP New Cumberland facility in Pennsylvania within 113 days after the order is placed. The contract mandates strict quality and technical compliance, including inspection of Class 3A and 3B threads per System 22 of FED-STD-H28/20 and part marking according to MIL-STD-130 using the SAE AS478 method. Quality systems must comply with SAE AS9003 or ISO 9001, and sampling will follow MIL-STD-1916 or ASQ H1331 with a zero-nonconformance requirement for acceptance. Additionally, the solicitation incorporates CMMC Level 2 certification requirements and requires the use of the Wide Area WorkFlow system for all invoicing and receiving reports. Inspection and acceptance will occur at the destination per FAR 52.246-2.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Transition and Terminal Guardrail Sections Supply

DGS - Statewide Procurement

POSTED

DEADLINE

W-Beam and Thrie-Beam Guardrail Rail Elements Manufacturing

DGS - Statewide Procurement

POSTED

DEADLINE

Solicitation # N0040626Q03860001

Fleet Logistics Center Puget Sound is soliciting quotes for I-BEAM (W shape) and Tee Bars in accordance with MIL-S-22698. This is a total small business set-aside under solicitation N0040626Q03860001, with the place of performance located in Yokosuka, Kanagawa. Offerors must submit their quotes by September 2, 2026, and are specifically required to state whether they are providing ATSM36 or Grade A materials. The government will evaluate proposals based on technical specifications, delivery, price, and past performance, with no specific order of importance. The anticipated award date is estimated for mid-September 2026. Interested parties should refer to the updated specifications in section C and review notices 4, 5, and 6 to ensure compliance with the reopened solicitation requirements.

Navsup Flt Logistics Ctr Puget Sound

POSTED

DEADLINE

Boat Topside Stanchions

Solicitation # N6470926Q0018

Solicitation N6470926Q0018 is a combined synopsis and solicitation issued by the Department of Defense through the Strategic Weapons Facility Kings Bay for the procurement of 72 boat topside stanchion assemblies. This requirement is established as a total small business set-aside under NAICS code 332312 and is offered as a firm-fixed-price contract. The project involves the fabrication, welding, serial numbering, and inspection of stanchion assemblies, with final delivery required at the Trident Refit Facility in Kings Bay, Georgia. The technical requirements are governed by specific design standards and drawings, including NAVA SEA DWC A45-5107 Rev. H and drawing TRK411-002-14A, which detail the materials, weights, colors, and installation layouts for the SSBN lifelines and stanchions. Interested parties must submit their quotes by the response deadline of September 9, 2026. The primary point of contact for this acquisition is Shakeya Pinkney at the Strategic Weapons Facility Lant Financia.

Strategic Weapons Facility Lant Financia

POSTED

DEADLINE

Physical Fitness Platform

Solicitation # W911S226U4318

Solicitation W911S226U4318 is a combined synopsis and request for quotation issued by the Department of Defense, specifically the W6QM Micc-Ft Drum office, for the procurement of a physical fitness platform. This contract is designated as a total small business set-aside under NAICS code 332312. The requirement is for a brand name or equal metal platform where measurements must be exact and cannot deviate from the specifications provided in the contract documentation. The scope of work includes the platform item, shipping, and installation, with a preferred delivery timeline of 30 days and a requirement that all equipment be new. The procurement process utilizes a pricing structure based on specific contract line item numbers and is evaluated based on both price and technical factors. Submissions must be handled exclusively through the PIEE system. The contract is FOB destination and requires compliance with various FAR and DFARS provisions, including Buy American certifications and country of origin documentation. The primary point of contact for this effort is Olivia Brown, and the performance is associated with zip code 22211.

POSTED

DEADLINE

Lake Greeson Bear Creek Pre-Fab Restroom

Solicitation # W912EE26QA033

Solicitation W912EE26QA033 is a request for quote issued by the U.S. Army Corps of Engineers, Vicksburg District, for a firm-fixed-price contract to purchase, deliver, set up, and connect to utilities one prefabricated concrete restroom building. The project is located in the Bear Creek Recreation Area on Lake Greeson in Pike County, Arkansas, with a desired completion date of May 1, 2027. This procurement is designated as a 100% Small Business Set Aside under NAICS code 332312 for Fabricated Structural Metal Manufacturing. The required facility must be a concrete structure featuring two fully accessible restrooms with showers, a 30-gallon water heater, LED lighting, and skylights. Technical specifications include minimum thicknesses of 4 inches for walls, 4.5 inches for the roof, and 5 inches for the floor. The building must be engineered to withstand a roof snow load of 250 PSF, a floor load of 400 PSF, wind speeds up to 150 MPH, and seismic group 1 design category E requirements. Interior finishes must include chemical resistant urethane floors and ADA-compliant signage with raised pictograms and braille. Exterior aesthetics require a board and batt top texture, river rock bottom texture, and a cedar shake roof. Quotes must be submitted electronically to Jasmine Lewis and must include the required bidding schedule. Evaluation will be conducted in accordance with FAR 52.212-2, and the government intends to award the contract without discussions. Technical inquiries are managed through the ProjNet system using the provided bidder inquiry key.

W07V Endist Vicksburg

POSTED

DEADLINE

56--REGULATORY, TRAFFIC SIGNS

Solicitation # 140A0926Q0031

Solicitation 140A0926Q0031 is a request for the procurement of regulatory traffic signs issued by the Department of the Interior's Navajo Region office located in Gallup, New Mexico. The opportunity is specifically set aside for Indian Small Business Economic Enterprises under NAICS code 332312. Interested parties must submit their responses by September 4, 2026, with the primary point of contact being Elsie Begay. As part of the submission requirements, offerors must complete the Indian Economic Enterprise Representation Form to certify their status under the Buy Indian Act and DIAR Part 1480. This certification requires the entity to maintain its status as an Indian Economic Enterprise from the time of the offer through the entire duration of the contract award. Failure to provide truthful information on this representation form may result in legal penalties under federal law.

POSTED

DEADLINE

Structural Steel Fabrication and Erection

KYTC - Div of Equipment

POSTED

DEADLINE

PANEL,STRUCTURAL,AI — 1420015426437 — N0038326QNA74

Solicitation # N0038326QNA74

This presolicitation from Navsup Weapon Systems Support is for the procurement of two structural aluminum panels and other replacement parts under NSN 1R-1420-015426437-V2. The items are designated as flight critical, requiring delivery FOB Origin. Due to the specialized engineering skills, unique design capabilities, and proprietary technical data required to maintain part quality, the government intends to negotiate with a single source under FAR 6.302-1. Prospective bidders who are not already approved sources must submit comprehensive qualification data via the NAVSUP WSS Source Approval Information Brochures to be considered for award. The government will evaluate interest and capability statements within 45 days of publication, though the final decision to compete the procurement remains at the government's discretion. This acquisition is not being conducted under FAR Part 12 for commercial items and is subject to specific Free Trade Agreements and the Buy American Act.

Navsup Weapon Systems Support

POSTED

DEADLINE

Commercial Fastener Supply – Machine Screw (NSN: 5305017067209)

AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

2 days ago

DEADLINE

in 6 days

View Details

More opportunities from Connecticut → DAS Procurement

Same awarding agency

NAICS: 561730

New

SLED

SNOW PLOWING AND/OR HEAVY DUTY SNOW REMOVAL WITH WHEEL LOADERS 2026-2027

Solicitation # RFQ 8926- Wtby

The City of Waterbury is requesting qualifications from multiple snow plowing operators to provide comprehensive citywide services for the 2026-2027 fiscal year snow season. The scope of work includes snow plowing and sanding operations as well as heavy duty trucking and the use of wheel loaders for snow removal. This solicitation, identified as RFQ 8926-Wtby, is managed by the Connecticut DAS Procurement agency. Interested parties must submit their responses by the deadline of September 15, 2026, at 3:30 PM. Primary inquiries should be directed to Maureen McCauley.

POSTED

DEADLINE

Modular Garage Storage Building

Solicitation # ITB 8929- Wtby

The State of Connecticut, through DAS Procurement, is soliciting bids for the procurement of a modular garage storage building to be installed at the North End Recreation Center. The project requires either a 24 by 36 foot or a 24 by 24 foot double bay garage building to be situated on a crushed stone bed. Bidders may provide an alternate price for the preparation and installation of a 3/4 inch crushed stone base. This solicitation, identified as ITB 8929- Wtby, was posted on August 28, 2026, with a response deadline of September 17, 2026, at 3:30 PM. The primary point of contact for this procurement is Maureen McCauley. Interested parties can find further details and submission guidelines via the CTSource Bid Board.

Commercial and Institutional Building Construction

POSTED

DEADLINE

Small Business (SBE) and Minority Business (MBE) Subcontracting Participation

POSTED

DEADLINE

Containment Setup and Decontamination Unit Operation

Other Building Equipment Contractors

POSTED

DEADLINE

Hazardous Waste Transportation and Disposal

Hazardous Waste Collection

POSTED

DEADLINE

Selective Demolition for Hazardous Materials Abatement

All Other Specialty Trade Contractors

POSTED

DEADLINE

Hazardous Window Sash Abatement (Interior Removal)

POSTED

DEADLINE

Hazardous Window Sash Abatement (Exterior Removal)

POSTED

DEADLINE

VINNYS 2ND AND 3RD FLOOR ABATEMENT PROJECT

Solicitation # VAP-039-091726

The City of Torrington is soliciting proposals under RFQ/RFP VAP-039-091726 for the removal of hazardous building materials from the second and third floors of a property located at 245 E. Elm Street, Torrington, CT. Funded by a CT Department of Economic and Community Development Municipal Brownfield Remediation Grant with an estimated value of 346,000 dollars, the project aims to prepare the site for redevelopment. The selected contractor must be registered under DEEP’s General Permit and adhere to strict OSHA asbestos regulations, NESHAP labeling, and Connecticut prevailing wage laws. The project is expected to commence in October 2026 and reach completion by December 31, 2026, with an anticipated duration of approximately 90 days. Proposals are due by 11:00 AM on September 17, 2026, and must be submitted in two sealed envelopes: Envelope A containing the Statement of Qualifications and a 5 percent bid bond, and Envelope B containing the Cost Proposal. Evaluation will be based on the respondent's project understanding, proposed schedule, capacity, pricing, and personnel. The contract includes specific state compliance goals, requiring good faith efforts to meet spending allocations of 39,418 dollars for Small Business Enterprises and 37,418 dollars for Minority Business Enterprises. Awarded contractors must provide 100 percent Performance and Labor and Material Payment Bonds and comply with CHRO non-discrimination requirements.

POSTED

DEADLINE

Supply of Janitorial Equipment and Tools

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

DEADLINE

Supply of Environmentally Preferable Cleaning Products

Other Chemical and Allied Products Merchant Wholesalers

POSTED

DEADLINE

Routine Office Janitorial Services

POSTED

DEADLINE