Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Subsea Navigation and Communication Suite

Open

International

Response Deadline11/30/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the supply and integration of a comprehensive subsea navigation and communication suite for prime contractors working on National Research Council of Canada projects. The selected provider will be responsible for the provision and installation of critical hardware, including Inertial Navigation Systems, Doppler Velocity Logs, Multi-Beam Echo Sounders, Ultra-Short Baseline transducers, acoustic modems, and GNSS receivers. The ultimate goal is the delivery of a fully integrated navigation and communication payload. Qualified candidates must possess specialized experience in subsea positioning to meet the technical requirements of the project. The contract is associated with NAICS code 334511 and is managed under the Government of Canada. Performance of the contract is expected to take place within Canada and potentially worldwide, with a response deadline set for November 30, 2026.

General Info

Supply and integrate subsea navigation and communication hardware for National Research Council projects.

Agency

Government of Canada → National Research Council of Canada

NAICS

334511 - Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

Place of Performance

Canada, World, CAN

Set-Aside

NONE

Documents

This scope was carved out of 25-58288.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

25-58288 Free Running Submarine Model (FRSM)

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 5

subcontract

Response DeadlineNov 30

Submission deadline

Response Deadline

11/30/2026, 07:00:00 PM UTCin 24 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyGovernment of Canada → National Research Council of Canada

ContactsNo contacts available

OfficeN/A

Organization / AgencyGovernment of Canada → National Research Council of Canada

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies and integrates navigation and communication systems for prime contractors on National Research Council of Canada (NRC) projects. Provisions and installs Inertial Navigation Systems (INS), Doppler Velocity Logs (DVL), Multi-Beam Echo Sounders (MBES), Ultra-Short Baseline (USBL) transducers, acoustic modems, and GNSS receivers. Requires experience with subsea positioning. Delivers a fully integrated navigation and communication payload.

Similar Contracts

Same NAICS industry code

Aircraft Lamp Assembly SupplierThis subcontract through the Department of Defense DLA Weapons Support ASC Supplier OEM Division requires the provision of two finished aircraft lamp assemblies, specifically Honeywell part number 8531140-901//CT. The selected supplier is responsible for manufacturing or sourcing the components, conducting quality assurance testing in accordance with MIL-STD-1916 or ASQ H1331 Table 1, and ensuring all packaging meets MIL-STD-2073-1E and MIL-STD-129 standards. To be eligible, the contractor must maintain an ISO 9001:2015 inspection system and provide a CMMC Level 2 self-assessment. The performance of the contract will take place in New Cumberland, Pennsylvania. Interested parties must respond by November 13, 2026, under NAICS code 334511.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 17 hours ago

DEADLINE

HANDSTAFF ASSY, ALTIMIT

Solicitation # SPE4A6-27-T-9106

This procurement, solicitation SPE4A6-27-T-9106, is for the acquisition of 32 units of Handstaff Assembly Altimiter (NSN 6610-00-104-0539), designated as a critical application item. The required hardware corresponds to part number 85413201130 from Kollsman Inc. or ElbitAmerica, Inc. (CAGE 89944) and must be manufactured in accordance with TDP Rev A Gen 1. The contract is issued by the DLA Weapons Support ASC Commodities Division, with a required delivery date of September 6, 2028, and a delivery timeline of 171 days after order. The contract mandates strict quality and technical standards, requiring sampling methods to align with MIL-STD-1916 or ASQ H1331, with specific AQLs for critical, major, and minor attributes. Packaging must comply with ASTM D3951, MIL-STD-129, and DLA packaging requirements (RP001). Key regulatory requirements include a CMMC Level 2 self-assessment, adherence to the Buy American Act and Berry Amendment, and compliance with FAR 52.246-2 for destination inspection. All invoicing and receiving reports must be processed electronically through the Wide Area WorkFlow (WAWF) system.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

GAGE, PRESSURE, DIAL IND

Solicitation # SPE4A5-27-T-2538

Solicitation SPE4A5-27-T-2538 is a procurement for 16 dial indicating pressure gages, identified as critical application items, with a delivery requirement of 291 days. The items must be manufactured in accordance with basic specification MIL-G-18997E(2) and reference QAP 13873 QAP-106. A mandatory Contractor First Article Test (FAT) is required, with the final test report submitted to the Naval Surface Warfare Center Philadelphia Division for review and approval. The contract specifies that mercury or mercury-containing compounds must not be intentionally added to the hardware, with limited exceptions for functional mercury in specific instruments or sensors. The contract mandates strict adherence to packaging and marking standards, requiring compliance with MIL-STD-2073-1E and MIL-STD-129, with a specific marking code for delicate instruments. Inspection and acceptance are set at the point of origin, and delivery is FOB Origin to DLA Distribution San Joaquin. Administrative requirements include the use of the Wide Area WorkFlow (WAWF) system for invoicing and payment. The solicitation also incorporates various FAR and DFARS clauses regarding cybersecurity, safeguarding covered defense information, and the prohibition of covered defense telecommunications equipment.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 17 hours ago

DEADLINE

ADAPTER, NIGHT VISION V

Solicitation # SPE4A7-27-T-3030

Solicitation SPE4A7-27-T-3030 is a request for quotations issued by the Defense Logistics Agency Weapons Support ASC Supplier Oper AE and AF Div for the procurement of 25 Night Vision Viewer Adapters, identified by NSN 5855-01-691-2626. The procurement is not a small business set-aside and requires delivery to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The required delivery date is September 10, 2027, with a need ship date of May 4, 2027, and a delivery window of 171 days after award. Inspection and acceptance will occur at the point of origin. The contract mandates strict adherence to quality and packaging standards, including ASTM D3951, MIL-STD-129, and RP001. Manufacturers must maintain a quality system compliant with SAE AS9003 or ISO 9001. Key regulatory requirements include compliance with the Buy American Act, the Berry Amendment, and various cybersecurity standards such as DFARS 252.204-7012 and CMMC Level 2. Additive manufacturing is prohibited unless specifically approved. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system. Quotations are due by November 13, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 17 hours ago

DEADLINE

Solicitation # SPE4A5-27-T-2569

Solicitation SPE4A5-27-T-2569 is for the procurement of 55 units of an access cover and associated protective cover kit (NSN 5340-01-189-3001), identified as a critical application item. The contract requires delivery within 21 days, with a need ship date of October 1, 2024, and a final required delivery date of November 26, 2026. Delivery is FOB Origin to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The procurement is managed by the DLA Weapons Support ASC Supplier Owner OEM Division. Technical and quality compliance is governed by the DLA Master List of Technical and Quality Requirements, specifically RC001 for source approval documentation and RQ017 for bare item marking. Inspection and acceptance occur at the origin, requiring the manufacturer's system to comply with SAE AS9003 or ISO 9001. Sampling must follow MIL-STD-1916 or ASQ H1331, with specific AQLs for critical, major, and minor attributes. Packaging must adhere to MIL-STD-2073-1 and RP001, requiring kits to be consolidated in a single cushioned box with a detailed contents list and marking per MIL-STD-129. Administrative requirements include the use of the Wide Area WorkFlow (WAWF) system for invoicing and payment. The contract incorporates several critical FAR and DFARS clauses, including NIST SP 800-171 cybersecurity assessment requirements, the Buy American Act, and hazardous material labeling standards. Item Unique Identification is not required per the service customer's request.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 17 hours ago

DEADLINE

STOP ASSY, TRANSMITT

Solicitation # SPE4A5-27-T-2512

Solicitation SPE4A5-27-T-2512 is a fixed-price procurement issued by the DLA Weapons Support ASC Supplier Oper OEM Division for the acquisition of 14 units of STOP ASSY, TRANSMITT (NSN 6610-00-239-2412). The contract specifies a delivery timeline of 171 days, with a need ship date of May 4, 2027, and an original required delivery date of June 16, 2027. Terms are FOB Origin, with both inspection and acceptance occurring at the destination, specifically the DLA Distribution Depot Hill at Hill AFB, Utah. The contractor must adhere to strict technical and quality standards, including packaging per ASTM D3951 and marking and labeling per MIL-STD-129, with DLA Master List requirements taking precedence. Quality assurance involves sampling plans based on MIL-STD-1916 or MIL-STD-105/ASQ Z1.4, requiring zero non-conformances for acceptance. Key regulatory requirements include a CMMC Level 2 Self-Assessment, compliance with the Buy American Act and Berry Amendment, and the use of the Wide Area WorkFlow (WAWF) system for electronic invoicing and payment.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 17 hours ago

DEADLINE

GIMBAL AND BRACKET

Solicitation # SPE4A5-27-T-2500

Solicitation SPE4A5-27-T-2500 is a federal procurement issued by the Defense Logistics Agency (DLA) Weapons Support ASC Supplier Oper OEM Division for the supply of two gimbal and bracket units, identified by NSN 6605-00-0899500. The requirement is categorized under NAICS code 334511. Key delivery milestones include a need ship date of May 4, 2027, and an original required delivery date of July 3, 2027, with shipping terms set as FOB Origin. Inspection and acceptance will occur at the destination. The contract mandates strict adherence to technical and quality standards, including MIL-STD-129 for marking and MIL-STD-2073-1E for packaging. Quality assurance will be managed through sampling methods such as MIL-STD-1916 or ASQ H1331, with a requirement for zero non-conformances under MIL-STD-105/ASQ Z1.4. Notable restrictions include a prohibition on the intentional use of mercury or mercury-containing compounds and a ban on additive manufacturing unless specifically authorized. Additionally, the contractor must provide a CMMC Level 2 Self-Assessment and utilize the Wide Area WorkFlow (WAWF) system for all invoicing and payment requests.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 17 hours ago

DEADLINE

PLATE, FRONT ASSY

Solicitation # SPE4A7-27-T-2999

The Defense Logistics Agency Weapons Support ASC Supplier Oper AE and AF Div is soliciting the procurement of six units of a Front Plate Assembly, identified as NSN 5821-01-076-2489. This item is designated as a critical application item and must be manufactured in accordance with several specific technical drawings, including drawing 13499 637-6438 and others. The contract requires a First Article Test (FAT) for two units, with a FAT delivery timeline of 180 days and a final required delivery date of June 28, 2027. Delivery is established as FOB Origin under the First Destination Transportation program, with the final destination being the DLA Distribution San Joaquin facility in Tracy, California. The contractor must adhere to strict quality and security standards, including a manufacturer inspection system compliant with SAE AS9003 or ISO 9001. Because the item involves technical data subject to ITAR or EAR export controls, the contractor must have an approved US/Canada Joint Certification Program certification and complete specific DLA export-control training. Additionally, the contract mandates compliance with DFARS 252.204-7012 for safeguarding covered defense information and requires the use of the Wide Area WorkFlow system for all invoicing and payment requests. Award preference may be given to HUBZone concerns, and all supplies must comply with the Buy American Act and Berry Amendment restrictions.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 17 hours ago

DEADLINE

GEAR AND SPROCKET A

Solicitation # SPE4A7-27-T-3096

Solicitation SPE4A7-27-T-3096 is a fixed-price procurement issued by the DLA Weapons Support ASC Supplier Oper AE and AF Div for the acquisition of three units of Gear and Sprocket A, identified by NSN 5865004729383. The contract specifies a delivery timeline of 171 days, with a need ship date of May 4, 2027, and an original required delivery date of November 1, 2027. Delivery is established as FOB Origin, with the final destination being DLA Distribution Warner Robins at Robins AFB, Georgia. Inspection and acceptance will occur at the destination, utilizing sampling methods in accordance with MIL-STD-1916 or ASQ H1331. The contractor must adhere to strict technical and quality requirements, including the DLA Master List, and must ensure packaging complies with ASTM D3951 and RP001, with marking and labeling following MIL-STD-129. Key regulatory requirements include a CMMC Level 2 Self-Assessment, compliance with Covered Defense Information standards, and adherence to the Buy American Act and Berry Amendment. Administrative requirements mandate the use of the Wide Area WorkFlow system for electronic invoicing and payment requests. Additionally, the solicitation prohibits the use of additive manufacturing for the produced items unless specifically authorized.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 17 hours ago

DEADLINE

COMPONENT ASSY 1553

Solicitation # SPE4A5-27-T-2463

Solicitation SPE4A5-27-T-2463 is a request for quotations issued by the DLA Weapons Support ASC Supplier Oper OEM Division for the procurement of five units of Component Assy 1553, specifically a Circuit Card Assembly-1553/Controller (NSN 5998015514342). The items are designated as critical application items and must be delivered FOB Origin to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The need ship date is March 31, 2028, with an original required delivery date of May 13, 2028. Inspection and acceptance will take place at the destination. The contractor must adhere to strict quality and technical standards, including ISO 9001:2015 compliance and sampling methods per MIL-STD-1916 or ASQ H1331. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, with specific requirements for bare item marking per RQ017. Security and compliance mandates include a CMMC Level 2 Self-Assessment, adherence to Covered Defense Information requirements, and compliance with the Buy American Act. Invoicing must be processed electronically through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 17 hours ago

DEADLINE

Solicitation # SPE7M1-27-T-2156

This procurement, managed by the DLA Weapons Support Maritime Supply Chain, is for the acquisition of 58 kits of gas detectors, identified by NSN 6665016908588. The contract is a HUBZone set-aside under NAICS 334511, with delivery required within 168 days after order. Terms are FOB Destination, with inspection and acceptance occurring at the destination. The procurement specifies that items must be delivered in serviceable condition, and the use of Class I ozone-depleting chemicals and mercury or mercury compounds in packaging is strictly prohibited. Technical and quality requirements are governed by the DLA Master List, with sampling conducted per MIL-STD-1916 or ASQ H1331. Packaging must adhere to MIL-STD-2073-1E and RP001, specifically requiring that hardware not be shipped in bulk and that serial numbers be marked on all container levels per MIL-STD-129. The contract incorporates several critical FAR and DFARS clauses, including requirements for safeguarding covered defense information, compliance with the Buy American Act, and strict adherence to hazardous material identification and safety data standards. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

Traffic Signal Hardware SupplyThis subcontract agreement outlines the supply of traffic signal hardware for prime contractors working on municipal projects for the City of Gray in Georgia. The scope of work includes the delivery of ten vertical three-face signals, two vertical four-face signals, one municipal cabinet, and 400 feet of spanner wire directly to the project site. All provided equipment must strictly adhere to municipal and Georgia Department of Transportation standards. The solicitation was posted on November 5, 2026, with a response deadline of November 16, 2026, falling under NAICS code 334511.

POSTED

about 21 hours ago

DEADLINE

More opportunities from Government of Canada → National Research Council of Canada

Same awarding agency

Specialized Tooling and Consumables SupplyThis subcontract agreement involves the supply of specialized tooling and consumables to support prime contractors working on research projects for the National Research Council of Canada. The scope of work focuses on the delivery of high-precision industrial saw consumables, specifically variable speed cutting wheels, diamond-tipped blades, and abrasive materials designed for use with ceramics and carbon fiber. The opportunity is managed under the Government of Canada and is categorized under NAICS code 333316. Performance of the contract will take place within Canada, with a response deadline set for November 20, 2026.

Photographic and Photocopying Equipment Manufacturing

POSTED

DEADLINE

Industrial Electrical InstallationThis subcontract for Industrial Electrical Installation involves providing electrical hook-up and power supply services for prime contractors on equipment procurement projects for the National Research Council Canada. The scope of work focuses on the installation of 120-220V power lines and safety grounding specifically tailored to meet industrial saw specifications, ensuring that all machinery is safely powered and grounded. The project falls under NAICS code 238210 and is managed by the Government of Canada. Interested parties must note the response deadline of November 20, 2026, for this opportunity located in Canada.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

Composite Cutting Saw SupplyThis subcontract involves the supply of a high-precision composite cutting saw for prime contractors working on National Research Council Canada research projects. The required equipment must be capable of cutting ceramic substrates, composite honeycomb, and both thermoset and thermoplastic carbon fibre with a precision accuracy of up to 25 microns. Key technical specifications include support for wet and dry cutting, a variable speed cutting wheel, and both automatic and manual feed options. The project is managed under the Government of Canada through the National Research Council of Canada and falls under NAICS code 333517. The successful provider is responsible for delivering a fully operational saw that adheres to all NRC safety standards by the completion deadline of March 31, 2027. Performance of the contract will take place within Canada.

Machine Tool Manufacturing

POSTED

DEADLINE

Subsea Scientific Instrumentation SupplyThe Subsea Scientific Instrumentation Supply subcontract involves the provision of specialized sensors and payload interfaces for prime contractors working on National Research Council of Canada projects. The scope of work includes the delivery of ranging lasers, hovering and station-keeping packages, and various scientific payload interfaces. Due to the technical nature of the equipment, the contractor must possess specialized knowledge of oceanographic instrumentation. This opportunity is issued by the Government of Canada under the National Research Council of Canada, with performance taking place across Canada and worldwide. The contract is categorized under NAICS code 334511. Interested parties must adhere to the response deadline of November 30, 2026.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

DEADLINE

Modified ISO Container FabricationThis subcontract involves the fabrication of modified ISO containers to be used as mobile laboratories for prime contractors working on National Research Council of Canada projects. The scope of work requires the conversion of standard containers through the installation of environmental controls, lighting, shelving, and workbenches equipped with 110 VAC outlets. Additionally, the units must be outfitted with 208 VAC 60 Hz three-phase shore power. To ensure safety and compliance, the contractor must provide electrical and HVAC certification for all modifications before delivering the fully outfitted containers. This project is managed under the Government of Canada and the National Research Council of Canada, with a response deadline set for November 30, 2026.

Prefabricated Metal Building and Component Manufacturing

POSTED

DEADLINE

LARS and Submarine Support EquipmentThis subcontract involves the design and fabrication of launch and recovery systems for prime contractors working on National Research Council of Canada projects. The scope of work specifically requires the fabrication of a Launch and Recovery System and the construction of a wheeled service cradle for the FRSM. Due to the nature of heavy lifting and deployment within marine environments, the project demands specialized mechanical engineering expertise to ensure the delivery of fully operational equipment. The contract is issued by the Government of Canada under the National Research Council of Canada, with performance taking place within Canada and globally. Interested parties must adhere to the response deadline of November 30, 2026. The project is categorized under NAICS code 333998, focusing on the delivery of critical submarine support equipment.

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

DEADLINE

Back-Seat Driver (BSD) Software DevelopmentThis subcontract involves the development of software architecture and simulator interfaces for prime contractors working on projects for the National Research Council of Canada. The primary objective is the creation of the Back-Seat Driver (BSD) architecture, which includes developing simulator platform interfaces, providing software development packages, and offering comprehensive integration support. Candidates must possess specialized proficiency in autonomous vehicle control software to successfully execute these technical requirements. The final deliverables for this engagement consist of the completed BSD software package, associated licenses, and all necessary technical documentation. This project is categorized under NAICS code 541511 and is managed by the Government of Canada. Interested parties must adhere to the response deadline of November 30, 2026, for this initiative performed within Canada.

Custom Computer Programming Services

POSTED

DEADLINE

Submarine Propulsion and Ballast System IntegrationThis subcontract involves the supply and installation of propulsion and ballast systems for prime contractors working on National Research Council of Canada projects. The scope of work requires specialized expertise in underwater propulsion and buoyancy control to integrate thrusters and motors, design depth control ballast systems, and implement emergency airbag or jettison weight systems for buoyancy. The final deliverable is a fully operational propulsion and ballast/trim system integrated directly into the vessel hull. The project is managed under the Government of Canada and the National Research Council of Canada, with performance taking place within Canada. Interested parties must adhere to the response deadline of November 30, 2026. The contract is categorized under NAICS code 336611, focusing on the technical integration of critical submarine systems.

Ship Building and Repairing

POSTED

DEADLINE

FRSM Hull and Structural FabricationThe FRSM Hull and Structural Fabrication subcontract involves the production of a 1:10 scale submarine hull, sail, and control surfaces for prime contractors supporting National Research Council of Canada projects. The scope of work encompasses precision machining, welding, and the assembly of external fairings and the pressure hull, with specific requirements for the installation of emergency flashers and external kill switches. Due to the technical nature of the project, the contractor must possess specialized experience in fabricating pressure-rated vessels and adhering to strict hydrodynamic tolerances. This opportunity is issued by the Government of Canada under NAICS code 336611, with the final deliverables consisting of the completed hull assembly, sail, and control surfaces. The solicitation was posted on November 5, 2026, and requires a response by November 30, 2026. Performance of the contract is designated for Canada.

Ship Building and Repairing

POSTED

DEADLINE

Ammonia Screw Compressor #2 Replacement Project

Solicitation # 26-58173

The National Research Council Canada is soliciting bids for the Ammonia Screw Compressor #2 Replacement Project at building M-10, located at 1 Arctic Ave in St. John's, NL. This open invitation to tender is limited to Canadian contractors and has a budget of 500,000 dollars or less. The scope of work involves the full replacement of the ammonia compressor, including the complete replacement of compressor refrigeration oil and all associated filtration components. Key deliverables that must be included in the total bid amount are four 208-liter drums of Star C refrigeration oil, three oil filters for the lubrication oil pump system, one new oil separator chamber gasket, and a complete set of coalescer filters for the oil separator. The contract will be awarded to the responsive bid with the lowest price. Bidders were required to attend mandatory site visits on October 27 or 28, 2026, and must submit their proposals via email to the NRC Bid Receiving Unit by November 9, 2026, at 2:00 PM ET. Compliance requirements include obtaining valid security clearances, maintaining comprehensive insurance with a six-year completed operations coverage, and adhering to various national and provincial codes, including CSA B52 and CSA B51. All work must be inspected by the Departmental Representative to ensure it meets substantial performance criteria and quality standards.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

Composite Cutting Saw

Solicitation # 26-58215

The National Research Council of Canada is seeking to acquire a new composite cutting saw under solicitation 26-58215 to replace an existing in-house unit that no longer meets operational and safety standards. This equipment will be used to cut novel composite materials into coupons for metrology and mechanical testing, reducing reliance on third-party services. The procurement is being conducted as an Advance Contract Award Notice, with the government intending to award the contract to UKAM Industrial Superhard Tools unless another supplier can demonstrate equivalent capabilities. The required saw must support the cutting of glass, ceramic substrates, composite honeycomb, and both thermoplastic and thermoset carbon fibre. Technical specifications include a minimum cutting capacity of 600mm x 550mm, cutting accuracy up to 25 microns, and a maximum floor footprint of 1200mm W x 2000mm L x 1500mm H. The unit must feature wet and dry cutting capabilities, automatic and manual feed options, a variable speed cutting wheel, and adjustable blade height, operating on 120 to 220 volts. The equipment is expected to be delivered by March 31, 2027, or May 31, 2027, depending on the specific contractual provision. Interested suppliers must submit a statement of capabilities to Adebisi Adeyeye by November 20, 2026.

Machine Tool Manufacturing

POSTED

DEADLINE

25-58288 Free Running Submarine Model (FRSM)

Solicitation # 25-58288

The National Research Council of Canada’s Ocean, Coastal and River Engineering Research Centre (NRC-OCRE) is soliciting the procurement, fabrication, testing, and delivery of a Free Running Submarine Model (FRSM) to be delivered to St. John’s, Newfoundland and Labrador. The FRSM will serve as a flexible research platform to generate hydrodynamic coefficients, validate submarine designs, evaluate failure modes, and support under-ice operations. The model must feature a 1:10 scale hull geometry based on the Victoria Class Albert model, though the design must allow for future reconfiguration to alternative geometries. Key deliverables include the FRSM hardware—comprising the hull, propulsion, navigation, and scientific payloads—along with a Back-Seat Driver (BSD) software architecture, a modified ISO container, a Launch and Recovery System (LARS), and five days of on-site training provided in English and French. The contract is awarded based on the highest combined rating of Technical Merit (60%), Price (15%), and Canadian Value-Added (25%), with a 10% price reduction applied to Canadian suppliers. The period of performance extends from the date of award to March 31, 2028, with delivery terms specified as Delivery at Place (DAP). Contractors must adhere to strict cybersecurity requirements for remote-control consoles and utilize reusable or recyclable packaging materials. Evaluation focuses on enhanced vehicle performance and under-ice operational capabilities, and the successful offeror must comply with the Canada Procurement Code of Conduct and provide necessary certifications regarding employment equity and Canadian content.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

W8486-260676 - RFSA - C-UAS National Array

Solicitation # WS5969392079

Department of Public Works and Government Services

POSTED

DEADLINE

Radar Signal Stimulator

Solicitation # W8472-265970/A

Department of National Defence

POSTED

DEADLINE

in about 2 months

Portable Digital Radiography Kits

Solicitation # W8474-278722

Department of National Defence

POSTED

DEADLINE

Short-Wave Infrared (SWIR) Camera Manufacturer/Supplier

Department of National Defence

POSTED

DEADLINE

Short-Wave Infrared (SWIR) Camera

Solicitation # W6431-270293

Department of National Defence

POSTED

DEADLINE

Supply of 110 GHz to 170 GHz VNA Frequency Extender Modules

National Research Council of Canada

POSTED

DEADLINE

Weak magnetic anomaly detection for defence and security

Solicitation # EN578-24ISC4/92

Department of Public Works and Government Services

POSTED

DEADLINE

Binocular Night Vision Device

Solicitation # 202603695

Royal Canadian Mounted Police

POSTED

DEADLINE

F7047-260008-2 - Multibeam Hydrographic Survey System

Solicitation # WS5751723575

Department of Public Works and Government Services

POSTED

CLOSED

Integrated Topo-Bathymetric LiDAR Payload Supplier

National Research Council of Canada

POSTED

CLOSED

Question/Answer #2 RFP 26-58124 Remotely Piloted Aircraft System (RPAS)-Deployable Integrated Topographic and Bathymetric (Topo-Bathymetric) LiDAR System

Solicitation # 26-58124

National Research Council of Canada

POSTED

CLOSED

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS