Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Supply of Digital I/O Circuit Card Assemblies (CCAs)

Active
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the manufacture or supply of 30 units of a Digital I/O Circuit Card Assembly with the National Stock Number 5998-017141152 and part number 6D31350G01REVF, with complete traceability back to the original manufacturer, Northrop Grumman. Each unit must meet stringent quality and documentation standards to ensure compatibility, reliability, and compliance with defense system requirements. The component is classified under NAICS code 334412, indicating its classification within electronic component manufacturing, and is being procured as a subcontract under the Department of Defense. Full lifecycle documentation including materials sourcing, production批次 records, and inspection certificates are mandatory to verify origin and integrity. The solicitation was posted on August 3, 2026, with a response deadline of August 17, 2026, at 8:00 PM Eastern Time. The contracting activity is managed by SPRMM1 DLA Mechanicsburg, a branch of the Defense Logistics Agency, indicating this is a government defense procurement. There is no set-aside designation specified, and performance is expected to be carried out by the vendor without a defined location specified in the data. All proposals must demonstrate proven capability to replicate the exact technical specifications and pedigree of the original Northrop Grumman design, with no substitutions or deviations permitted without explicit approval.

General Info

Supply 30 traceable Digital I/O Circuit Cards to Defense Logistics Agency, per Northrop Grumman specs, with full documentation.

Agency

Department Of Defense → SPRMM1 DLA MechanicsburgView Agency

NAICS

334412 - Bare Printed Circuit Board ManufacturingView NAICS

Place of Performance

PA, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

Posted

subcontract

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → SPRMM1 DLA Mechanicsburg
ContactsNo contacts available
OfficeN/A
Organization / Agency
Department Of Defense → SPRMM1 DLA Mechanicsburg
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Manufacture or supply of 30 units of a Digital I/O Circuit Card Assembly (CCA), NSN 5998-017141152, Part Number 6D31350G01REVF, with full traceability to the original manufacturer (Northrop Grumman).

Similar Contracts

Same NAICS industry code

NAICS: 334412
New
DIBBS
CIRCUIT CARD ASSEMB
Solicitation # SPE7M5-26-T-366A
This contract pertains to the procurement of circuit card assemblies identified by NSN 5998-01-729-3395, with a quantity of three units to be delivered within 113 days from the contract award under solicitation SPE7M5-26-T-366A. All items must comply with stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, and are subject to configuration change management policies requiring government engineering approval due to restricted sourcing. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129, with specific methods for preservation, wrapping, and containerization, and palletization must meet DLA packaging guidelines. Delivery is FOB origin to the DLA Distribution facility in New Cumberland, Pennsylvania, with inspection and acceptance occurring at destination, and no quantity variance is permitted. The contract strictly prohibits the use of Class I ozone-depleting chemicals, superseding any conflicting specification requirements, and mandates prior approval for substitute chemicals. Transportation logistics are governed by DLA procedural notes C19 and C20, and the required delivery date is December 23, 2025, with an original required delivery date of May 22, 2026. The unit price is $3.00 per unit, totaling $9.00, and all markings and documentation must conform to specified government standards without deviation unless formally authorized.
ACTIVE DEVICES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334412
New
DIBBS
EXTENDER CARD, ELECT
Solicitation # SPE7M8-26-T-5594
The contract pertains to the procurement of an electrical extender card, identified by NSN 5998-01-120-0837 and Raytheon part numbers 3013339 and 390709-2, with a quantity of three units to be delivered FOB origin within 378 days. All items must comply with stringent DLA packaging standards per MIL-STD-2073-1E and marking requirements under MIL-STD-129, with no special marking applied. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, and inspection and acceptance occur at the destination. The contract prohibits the use of Class I ozone-depleting substances in any phase of design, manufacturing, or testing unless prior written approval from the contracting officer is obtained, and bans intentional addition of mercury or mercury-containing compounds unless specifically exempted for functional uses in batteries, lighting, sensors, or naval-specified reagents, with additional containment requirements for portable devices. For printed circuit boards, MIL-PRF-31032 is the preferred standard, replacing obsolete specifications such as MIL-PRF-55110 and MIL-P-50884, while ensuring equivalence to previously used MIL-S-13949 materials. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and critical, major, and minor attributes are assigned verification levels VII, IV, and II respectively. Cybersecurity compliance requires a CMMC Level 2 self-assessment. All technical and quality requirements are governed by the DLA Master List, with revision control tied to the solicitation or award date depending on acquisition size. The unit of issue is each (EA), priced at $3.00 per unit, totaling $9.00, with zero variance allowed in quantity.
ELECTRICAL DEVICES DIV

POSTED

about 17 hours ago

DEADLINE

in 2 days
View Details
NAICS: 334412
New
DIBBS
INDICATOR, FAULT LOCATI
Solicitation # SPE7M1-26-T-223T
This contract pertains to the procurement of a fault locating indicator identified by NSN 6625-00-394-0860, with a quantity of three units to be delivered within 168 days under solicitation SPE7M1-26-T-223T. The item is classified as a commercial item and must comply with technical and quality requirements from the DLA Master List of Technical and Quality Requirements, specifically referencing MIL-PRF-83287/1D and MIL-PRF-83287G specifications. All components must be sourced exclusively from qualified manufacturers listed on approved Qualified Products Lists or Qualified Manufacturers Lists, and the offeror agrees to supply only such qualified components. The item is designated as a critical application product and may contain batteries, requiring adherence to related handling and safety protocols. The use of ozone-depleting substances is strictly prohibited unless explicitly approved in writing by the Contracting Officer, and mercury or mercury-containing compounds are banned from direct contact with the item except in specified functional applications such as batteries, fluorescent lights, or certain instruments, with additional containment requirements for portable devices. Hazardous materials, if present, necessitate submission of a fully completed Safety Data Sheet compliant with Fed-Std-313 and OSHA 29 CFR 1910.1200, while non-hazardous items must be packaged per ASTM D3951 unless overridden by DLA requirements. Packaging and labeling must follow MIL-STD-129 and RP001, with palletization conforming to DLA standards. The delivery is FOB origin, with inspection and acceptance occurring at destination, and shipment must be directed to Hill AFB, Utah as specified. Cybersecurity compliance requires a CMMC Level 2 self-assessment, and the contractor must ensure all documentation and processes meet federal procurement rules, including FAR clauses governing hazardous materials and commercial item definitions.
MARITIME SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 2 days
View Details
NAICS: 334412
New
DIBBS
CIRCUIT CARD ASSEMB
Solicitation # SPE7M1-26-T-248F
The contract pertains to the procurement of a circuit card assembly with stringent technical, quality, and cybersecurity requirements. The item must comply with DLA Master List technical and quality specifications, and the contractor is required to maintain a Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment to ensure adequate protection of covered defense information. Strict packaging protocols are mandated under MIL-STD-2073-1E and DLA Packaging Requirements, including the use of qualified ESD and EMI protective materials as specified by MIL-PRF-81705, with mandatory use of Type I and Type III barrier materials depending on the protection need. All packaging materials must be sourced from QPL-81705 qualified manufacturers, and items must be handled and packaged at approved protective workstations. ESD and physical protection for leads and terminals is required through proper cushioning and container design, even when not explicitly called out in packaging codes. Item Unique Identification is waived per customer request, but marking must follow MIL-STD-129 with no special marking required. The supply is subject to a zero-defect sampling standard using MIL-STD-1916 or comparable zero-based plans, with critical, major, and minor attributes assigned verification levels VII, IV, and II respectively. Mercury and mercury-containing compounds are strictly prohibited in the assembly, preservation, packaging, and marking unless explicitly exempted for specific functional components like batteries or sensors, which must meet additional containment requirements per NAVSEA 5100-003D. The item must be delivered within 157 days FOB origin to the designated DLA distribution facility in New Cumberland, Pennsylvania, with no variance permitted in quantity. The delivery deadline is January 19, 2027, with an original required date of January 4, 2027. Preservation method GX and packaging codes align with standard DLA logistics directives, and all shipments must adhere to DLA transport and freight protocols. The contract is administered by the Department of Defense through the Maritime Supply Chain, with procurement governed under NAICS code 334412 and managed by Ryan Snyder.
MARITIME SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334412
New
Federal
59--CIRCUIT CARD ASSEMB, IN REPAIR/MODIFICATION OF
Solicitation # N0010426QYAC4
This contract is a fixed-price procurement issued by the Navy’s NAVICP-MECH for the repair and modification of Circuit Card Assemblies under solicitation N0010426QYAC4, with a response deadline of August 31, 2026. The requirement is a total small business set-aside, mandating compliance with small business subcontracting plans and the Buy American Act, including specific certificates and exemptions related to free trade agreements and balance of payments programs. All repairs must adhere to the contractor’s approved technical standards and procedures, with strict adherence to MIL-STD-130 for item marking and MIL-STD-2073 for packaging. The CAGE code 96169 and reference number 263514106-0005 specify the exact assembly to be repaired, and any design, material, or part number changes require prior written approval from the Contracting Officer, categorized by specific code designations that define the nature of the modification. The contract imposes stringent mercury-free requirements, prohibiting any metallic mercury or contamination in materials intended for use on submarines or surface ships, with detailed protocols for testing, documentation, and contractor liability for subcontractor compliance. Mercury use is only permitted with explicit written approval, requiring full disclosure of parts, containment methods, and warning labeling. Quality assurance responsibilities rest with the contractor, who must perform inspections in accordance with original manufacturer specifications, maintain complete records for 365 days after final delivery, and allow government inspection at any time. Packaging, preservation, and marking must align with referenced defense standards, and all applicable documents—including canceled ones—must be obtained through authorized DOD sources. The contract includes an option to increase quantities for up to 365 days and mandates use of Workflow Pro’s Assist Module for procurement administration. All contractual documents are deemed issued upon electronic delivery, and communications are directed to Jessica T. Grzywna at NAVICP-MECH in Mechanicsburg, PA, with cognizant oversight from DFAS and DCMA.
Navsup Weapon Systems Support Mech

POSTED

about 22 hours ago

DEADLINE

in 27 days
View Details
NAICS: 334412
New
Federal
SPRRA226R0097 PATRIOT SPARES – LOCKHEED MARTIN SOLE SOURCE
Solicitation # SPRRA226R0097
The U.S. Government is seeking a firm fixed price single purchase contract for a circuit card assembly, NSN 5998-01-497-3340, part number 13508140, in support of the Patriot missile weapon system, with an estimated quantity of 80 units. This item is exclusively sourced from Lockheed Martin Corporation Missiles and Fire Control, CAGE 64059, due to restricted technical data rights, absence of government-owned intellectual property, and the economic impracticality of reverse engineering. The item carries an AMC/AMSC code 3P, which prohibits acquisition from any other source except the original manufacturer, and this acquisition is justified under FAR 6.302-1(A)(2) due to limited responsible sources. The estimated production lead time is 720 days after contract award, with deliveries required to Fort Bliss, TX. All communications must be directed via email to DLA-AHCA, Mari Bretz, and must reference the solicitation number SPRRA2-26-R-0097, including the offeror’s name, company, CAGE code, phone number, and email address. No telephone requests are permitted. The contractor must be capable of managing all aspects of manufacturing, including supply chain, long-lead parts procurement, obsolescence mitigation, logistics, and final delivery, and will bear all recurring and non-recurring engineering costs associated with qualifying as a source. While the acquisition is currently sole source, the Government encourages other businesses—including 8(a), small businesses, service-disabled veteran-owned, HUBZone, and women-owned small businesses—to seek source approval for future opportunities. Subsequent solicitations may include economic order quantities to optimize procurement efficiency, and the Government retains the right to adjust award quantities based on market research, historical data, and economic conditions. The Government may cancel this procurement at any time prior to award without obligation to reimburse offerors. Export of technical data associated with this acquisition is restricted under the Arms Export Control Act and the Export Administration Act, and may not be released outside the United States without prior government approval. Foreign firms must submit requests through their respective embassies.
Al DLA Aviation At Huntsville

POSTED

about 22 hours ago

DEADLINE

in 3 months
View Details
NAICS: 334412
New
Federal
CIRCUIT CARD ASSEMB
Solicitation # N0010426QND79
This contract pertains to the repair of CIRCUIT CARD ASSEMBLY items under a fixed-price arrangement, governed by stringent technical, quality, and compliance requirements set by the U.S. Navy through NAVSUP Weapon Systems Support in Mechanicsburg, Pennsylvania. The repair work must strictly adhere to specified drawings, including 8291221 and 8291222, and conform to MIL-STD-130 Rev N for marking, ANSI/ESD S20.20 for electrostatic discharge control, and MIL-STD-2073 for packaging. All repairs must be performed in accordance with the contractor’s approved procedures and original manufacturer specifications, with full accountability for teardown, evaluation, repair turn-around time, and throughput constraints. Quotes must include firm fixed pricing for full repair efforts, estimated or actual costs for new parts, and explicit disclosure of any exceptions to packaging, labeling, inspection locations, or surplus materials; failure to disclose exceptions may result in award based solely on solicitation terms. Price reductions will be imposed for noncompliance with established repair turn-around times, and failure to meet deadlines may trigger default termination rights. The contract is issued under Emergency Acquisition Flexibilities and is subject to Defense Priorities and Allocations System (DPAS) certification, with a mandatory priority rating for national defense use. All contractors must be authorized distributors of the original manufacturer’s item, with proof provided on official letterhead. Full compliance with Buy American Act provisions, Small Business Subcontracting Plan requirements, and cybersecurity maturity model certification is mandated. The contractor is responsible for all inspection and testing activities, with records retained for 365 days after final delivery, and must secure formal government acceptance of all repaired items within the contracted RTAT. Documentation access is restricted via SAM.gov, and classified or NOFORN materials require formal requests through designated Navy channels. Final acceptance requires programming and testing by the ISEA at NUWC Keyport, Washington, before fleet issuance. Contract documents are deemed issued upon electronic transmission, requiring bilateral contractor acceptance. All communications and submissions must reference the solicitation number N0010426QND79, with responses due by August 28, 2026.
Navsup Weapon Systems Support Mech

POSTED

about 22 hours ago

DEADLINE

in 24 days
View Details

More opportunities from Department Of Defense → SPRMM1 DLA Mechanicsburg

Same awarding agency

NAICS: 334290
New
Federal
ANTENNA SUBASSEMBLY
Solicitation # SPRMM126QGE91
This contract pertains to the procurement of an ANTENNA SUBASSEMBLY under emergency acquisition flexibilities provided by FAR Part 18, with performance governed by strict quality, inspection, and documentation standards. The item must be manufactured to meet the designated CAGE code 91417 and reference number 3238924-101, with all physical identification complying with MIL-STD-130 Revision N. The contractor is responsible for all inspection activities unless otherwise directed, and must maintain complete records for 365 days after final delivery. Any design, material, or part number changes require prior written approval from the NAVICP-MECH Contracting Officer and must be classified using one of six standardized change codes, with substitutions only allowed after formal review and documentation. Packaging must adhere to MIL-STD-2073, and the government reserves the right to conduct inspections at source or upon delivery. The solicitation mandates electronic submission of invoices and receiving reports via WAWF and requires vendors to be authorized distributors of the original manufacturer, with proof of authorization submitted with their offer. Award will be based on the Lowest Price Technically Acceptable methodology, with offers valid for a minimum of 90 days. Contractors must register for the PIEE EDA portal to access order information and comply with mandatory use of Workflow Pro for payment processing. The contract incorporates several government-wide clauses including mandatory small business representations, security prohibitions, veteran equity requirements, and compliance with National Defense priority ratings. Technical data is not provided, and all applicable military specifications must be obtained independently through official DOD sources. Notifications for contract modifications should be received via NAVSUP WSS, and any changes to production facilities require a $250 administrative cost reduction and written approval, with strict constraints on delivery timing, location, and f.o.b. point.
Other Communications Equipment Manufacturing

POSTED

about 22 hours ago

DEADLINE

in 9 days
View Details
NAICS: 336390
New
Federal
25 - HOIST UNIT, HYDRAULI
Solicitation # SPRMM1-26-Q-KE77
This procurement is for a single hydraulic hoist unit with NSN 7HH 2590-01-625-3379 under a 100% Small Business Set Aside associated with NAICS code 336390, issued as a Request for Quotation by SPRMM1 DLA Mechanicsburg under solicitation number SPRMM1-26-Q-KE77. The response deadline is July 15, 2026, and the award will be made to the lowest priced, technically acceptable offer, where technical acceptability is a mandatory pass/fail gate requiring strict compliance with all solicitation terms without exceptions. The contractor must supply the item with full supply chain traceability documentation including the manufacturer’s CAGE code, batch identification, and identification of all intermediaries, and must adhere to ISO 9001 quality standards throughout production. The item must be packaged and marked in accordance with MIL-STD-2073-1 and MIL-STD-129, with preservation, packing, and marking meeting specific military standards including Level B for most domestic and air shipments and Level A for surface shipments, while all labels must be machine readable and include the Procurement Instrument Identifier and Contract Line Item Number. Packaging must comply with MIL-STD-147 for palletization and ANSI MH1-2016 for pallet standards, and electrostatic discharge-sensitive components must be protected per ANSI/ESD S20.20-2021. Delivery is FOB Destination with no specified timeline beyond ASAP, and performance must occur at Mechanicsburg, Pennsylvania unless otherwise approved by the Contracting Officer with strict conditions. The contractor must implement NIST SP 800-171 cybersecurity requirements and ensure any cloud services used meet FedRAMP Moderate baseline protections for Controlled Unclassified Information. Electronic invoicing must be processed through WAWF with SAM registration active, and any offeror not the original manufacturer must disclose the OEM, CAGE code, and part number. Government source approval is required prior to award, and all offers must include current SAM representations regarding small business size status, foreign ownership, Buy American criteria, and Covered Defense Telecommunications Equipment. Documentation for surplus material must prove prior government ownership, and all exceptions to specifications must be clearly indicated during EDI submission or submitted via hard copy to avoid disqualification.
Other Motor Vehicle Parts Manufacturing

POSTED

about 22 hours ago

DEADLINE

in 7 days
View Details
NAICS: 333611
New
Federal
BEARING ASSEMBLY,JO
Solicitation # SPRMM126QMF07
This contract pertains to the procurement of the BEARING ASSEMBLY, JO, under solicitation SPRMM1-26-Q-MF07, issued by SPRMM1 DLA Mechanicsburg on behalf of the Department of Defense. The requirement specifies the manufacture and delivery of 20 units with NSN 7HH 2825-00-296-0690 PP and applicable reference part numbers 90099 715J759A01 and 90099 715J759G01, all to be produced in compliance with MIL-STD-130 Rev N for item marking and MIL-STD-2073 for packaging, with preservation levels determined by shipment type: Level B for domestic and air shipments, Level A for surface overseas. Inspection and acceptance are to occur at the contractor’s facility per DLA Procurement Note E06 and FAR 52.246-2, with the contractor responsible for all inspection activities and record retention for 365 days post-delivery. The Government retains the right to conduct independent inspections to verify conformity. Award will be made using the Lowest Price Technically Acceptable (LPTA) methodology under DFARS 215.101-2-70(a)(1)(i), requiring full compliance with solicitation terms without exceptions. Offers must be submitted electronically by 4:30 PM local time on June 26, 2026, and non-manufacturers must disclose the OEM, CAGE code, and part number. Electronic Data Interchange submissions must explicitly note any deviations from specifications, or the offer will be evaluated solely against solicitation criteria. All contractors must maintain current representations and certifications in SAM, including compliance with FAR 52.204-7 and DFARS 252.204-7016, and adhere to cybersecurity requirements outlined in NIST SP 800-171 and the Controlled Unclassified Information (CUI) Registry, with any cloud service providers meeting FedRAMP Moderate baseline standards. The contract enforces Buy American provisions and Combating Trafficking in Persons clauses, and requires use of WAWF for electronic invoice and receiving report submissions via PIEE. Unit packaging must be marked per MIL-STD-129 including Procurement Instrument Identifier, CLIN, and SubCLIN; Depot
Turbine and Turbine Generator Set Units Manufacturing

POSTED

about 22 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334514
New
Federal
5 Year Indefinite Delivery, Indefinite Quantity Contract for TEST, FLASH POINT
Solicitation # SPRMM1-26-R-RA69
The U.S. Government, through the Defense Logistics Agency at Mechanicsburg, Pennsylvania, is seeking industry input for a potential five-year Indefinite Delivery, Indefinite Quantity contract to procure the Test, Flash Point item with National Stock Number 6625-01-472-6783 and Part Number FLNAV/ENDH8. This item is governed by AMC Code 3R, indicating it must be acquired directly from the original manufacturer because the government does not own or have access to the technical data required to qualify alternate suppliers, and it is deemed uneconomical to obtain such data or reverse engineer the component. The solicitation is solely for informational purposes and does not constitute a formal request for proposals or a commitment to award a contract; no funds are allocated for respondents to prepare submissions, and all responses are voluntary. The anticipated contract will be managed under solicitation number SPRMM1-26-R-RA69, with a response deadline of August 11, 2026. The North American Industry Classification System code is 334514, relating to other instrument manufacturing. The office responsible is the SPRMM1 DLA Mechanicsburg, located in Mechanicsburg, Pennsylvania, and the primary point of contact is Giovanna Poppleton. The item is intended for performance in Broken Arrow, Oklahoma. This sources sought notice precedes a potential full and open competition, with no set-aside intended for small businesses or other categories, and no contract award is guaranteed based on responses received.
Totalizing Fluid Meter and Counting Device Manufacturing

POSTED

about 22 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335999
New
Federal
GENERATOR;FUNCTION,
Solicitation # SPRMM126QRA75
The contract pertains to the procurement of a GENERATOR;FUNCTION, identified by part number 33521BN, under solicitation SPRMM126QRA75 issued by DLA Mechanicsburg. The requirement is governed by commercial acquisition procedures under FAR Part 12 and will be awarded using the Lowest Price Technically Acceptable (LPTA) evaluation method. The quantity has been increased from 64 to 79 units, with responses due by July 31, 2026, and quotes must remain valid for 60 days. Contractors must adhere to strict technical specifications including MIL-STD-130 Rev N for marking, and any changes to design, material, or part number require prior written approval from the Contracting Officer with code-based justification. The item must be procured exclusively under the specified CAGE and part number, with no substitutions permitted without formal authorization. All deliveries are subject to inspection at source per DLA note E06, and final acceptance occurs at the designated facility. Submission of quotes must be made electronically via PIEE-WAWF, including the Invoice and Receiving Report (Combo), and vendors must declare their status as authorized distributors if not the original equipment manufacturer, providing CAGE codes and OEM details. Compliance with security and export controls is mandatory, with documents labeled using applicable distribution statement codes, including potential NOFORN restrictions. Contractors are required to maintain complete inspection records for 365 days post-delivery and must notify NAVSUP WSS Mechanicsburg to receive automated contract updates via NECO and PIEE EDA. Production facilities cannot be relocated without written permission and a minimum $250 administrative cost reduction. All applicable standards, including MIL-STD-2073 for packaging, must be followed, and access to restricted documents requires formal requests through designated channels. The contract emphasizes full contractor responsibility for quality assurance, with the government retaining the right to verify compliance through independent inspection at any time.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

4 days ago

DEADLINE

in about 11 hours
View Details
NAICS: 333998
New
Federal
GLIDER/LARS ADAPTER
Solicitation # SPRMM126QGE72
The contract pertains to the procurement of the GLIDER/LARS ADAPTER under solicitation SPRMM126QGE72, issued by the Department of Defense through DLA Mechanicsburg. The item must be manufactured in strict compliance with specified military standards including MIL-STD-130 Rev N for marking, and packaging must adhere to MIL-STD-2073. The contractor is responsible for all inspection and quality assurance functions, with records retained for 365 days after final delivery. Any design, material, or part number changes require prior written approval from the NAVICP-MECH Contracting Officer, and substitutions must be clearly categorized under one of six defined change codes. The item must be sourced from the approved CAGE code and reference number, and non-manufacturers must disclose the original equipment manufacturer’s details. Only authorized distributors of the original manufacturer are eligible for award, requiring documented proof of authorization. Payment and documentation are to be processed electronically via the Wide Area Workflow system, requiring combined invoice and receiving report submission through PIEE-WAWF. The solicitation mandates full compliance with DoD security protocols, including the prohibition of unauthorized disclosure of technical data under classification directives and distribution statements, with seven defined codes governing distribution limits. Contractors must register for Electronic Document Access on the PIEE portal to monitor contract actions, and all quotes must include surplus certificates if applicable. The response deadline is August 31, 2026, with a requested quote validity of 90 days or more. RFID tagging is not currently required unless the shipment destination appears on the DFARS passive RFID listing. All communications and submissions must be directed to the designated contracting point of contact, and failure to meet any solicitation requirement, including documentation or certification, will render the quote non-responsive.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

4 days ago

DEADLINE

in 27 days
View Details
NAICS: 334419
New
Federal
FIBER OPTIC GYRO AS
Solicitation # SPRMM126QHE49
This contract pertains to the procurement of a Fiber Optic Gyro AS under solicitation SPRMM126QHE49, issued by the Defense Logistics Agency (DLA) Mechanicsburg with a response deadline of September 14, 2026. The requirement mandates strict adherence to specific military standards including MIL-STD-130 Rev N for item marking, MIL-STD-2073 for packaging, and compliance with designated CAGE code 53711 and reference number 8241846. Offerors must be authorized distributors of the original equipment manufacturer and must provide written proof of authorization. The contract stipulates that no substitutions or design changes may be made without prior written approval from the NAVICP-MECH Contracting Officer, and any changes must be classified under one of six specified code categories with supporting documentation. Inspection, acceptance, and quality assurance responsibilities rest with the contractor, who must maintain inspection records for 365 days post-delivery. All items must comply fully with contract requirements regardless of sampling thresholds, and defective material will not be accepted. Electronic submission is mandatory through the Wide Area Workflow (WAWF) system for invoices and receiving reports, and contractors are required to register for the Procurement Integrated Enterprise Environment (PIEE) Electronic Data Access (EDA) portal to monitor contract actions. The solicitation prohibits changes to production facilities without approval, and such requests must include a $250 administrative cost reduction. The contract incorporates multiple clauses including mandatory use of WFP Mod Assist, cybersecurity maturity certification requirements, small business subcontracting obligations, and preference for U.S.-flag commercial vessels. It also includes security prohibitions, alternate annual representations, and priority rating provisions for national defense purposes. Technical data and drawings are not provided, and all referenced specifications must be obtained independently through Department of Defense sources. Delivery timelines and offer validity periods are unspecified but must be confirmed by the offeror. All communications must include a valid email point of contact, and vendors are strongly encouraged to register with NAVSUP Weapon System Support to receive automated notifications regarding contract issuance and modifications.
Other Electronic Component Manufacturing

POSTED

4 days ago

DEADLINE

in about 1 month
View Details
NAICS: 332919
New
Federal
VALVE,CHECK
Solicitation # SPRMM126QKG80
This contract is issued under solicitation SPRMM126QKG80 by the Department of Defense through DLA Mechanicsburg for the procurement of a CHECK VALVE with the CAGE code 54497 and reference number 1213C2817. The contract mandates strict adherence to military and industry quality standards including MIL-STD-130 Rev N for marking, IPC J-STD-001 Class 3 for soldering, and MIL-STD-2073 for packaging. Inspection and acceptance of the material must occur at the source as defined by DLA Procurement Note E06, with final acceptance of packaging also to be conducted at a designated location to be specified. All deliveries require electronic submission of invoices and receiving reports via PIEE-WAWF, and contractors must be registered in the Procurement Integrated Enterprise Environment and comply with mandatory use of Workflow Pro. Compliance with higher-level quality requirements is enforced through ISO 9001, and the evaluation for award is strictly based on Lowest Price Technically Acceptable criteria. The contractor must be an authorized distributor of the original equipment manufacturer, subject to providing documentation on company letterhead signed by an authorized official. Any change to design, material, part number, or production facility requires prior written approval from the Contracting Officer, with specific codes indicating the nature of the change and a mandatory $250 administrative cost reduction for facility changes. Records of all inspections must be maintained for 365 days after final delivery, and non-compliant or defective materials are not acceptable even under sampling protocols. Technical documentation and specifications referenced in the contract must be obtained from authorized sources, with additional controls on distribution and access due to official use and NOFORN designations. The solicitation response deadline is August 31, 2026, and communication must be routed through the designated point of contact. Contractors are also encouraged to register with NAVSUP WSS to receive automated notifications regarding contract issuance and updates.
Other Metal Valve and Pipe Fitting Manufacturing

POSTED

4 days ago

DEADLINE

in 27 days
View Details
NAICS: 332919
New
Federal
REPAIR MODULE,STRAI
Solicitation # SPRMM126QMH22
This solicitation seeks the manufacture and delivery of the REPAIR MODULE,STRAI under a fixed-price contract issued by the Defense Logistics Agency (DLA) Mechanicsburg, with the solicitation number SPRMM126QMH22. The requirement mandates strict adherence to military standards including MIL-STD-130 REV N for marking and MIL-STD-2073 for packaging, with all work performed at the approved production facility unless a formal, cost-justified change is approved in writing by the Contracting Officer. The contract incorporates mandatory inspection protocols at source, requiring the contractor to manage and document all quality assurance activities, maintain inspection records for 365 days post-delivery, and ensure full compliance with specifications even when explicit inspection clauses are absent. Submission of quotes must be electronic via EDI, with any deviations clearly stated; failure to do so will result in award based solely on solicitation terms. Contractors must disclose their status as OEMs or authorized distributors, providing CAGE codes and part numbers, and must register for the PIEE-WAWF system to electronically submit invoices and receiving reports post-award. The contract operates under the Lowest Price Technically Acceptable (LPTA) evaluation method and requires full compliance with security and export control regulations, including handling of NOFORN and Official Use Only documents through designated DLA channels. All technical data and drawings must be safeguarded according to designated distribution statement codes, and contractors are subject to prohibitions against unauthorized production facility changes, substitutions, or alterations without prior written approval and a $250 administrative cost reduction. The offer must be submitted by August 14, 2026, and is governed by mandatory clauses such as the Warranty of Title, Inspection of Supplies, and Mandatory Use of Wide Area Workflow, along with current government-wide policy deviations on representations and security exclusions. Vendors are strongly encouraged to register with NAVSUP Weapon System Support for automated notifications via NECO and the PIEE Electronic Data Access tool to track contract issuance and modifications. All contractual documents are deemed issued upon electronic transmittal, and failure to provide contact information or proof of authorized distribution will disqualify the offer.
Other Metal Valve and Pipe Fitting Manufacturing

POSTED

4 days ago

DEADLINE

in 10 days
View Details