This Subcontract opportunity from Maryland was posted on June 4, 2024. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Supply of Hot Applied Asphaltic Joint Sealant

Closed

State & Local

Submission Closed08/06/2024, 08:00:00 PM EDT

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

Solicitation # 2027-101

The Bossier Parish Police Jury is soliciting bids for solicitation number 2027-101 to secure an annual supply of approximately 20,000 gallons of CSS-1 Tack. The material must conform to Section 504 of the Louisiana Standard Specifications for Roads and Bridges, Current Edition. The contract is for a one-year period, with the possibility of three additional one-year options upon mutual agreement. Material will be supplied on an as-needed basis and picked up by the Bossier Parish Highway Department at the manufacturer's plant site, with a 24-hour notice for delivery considered sufficient. The contract will be awarded to the low bidder based on the price per gallon and the haul distance from the jobsite, which is calculated at a rate of 0.10 dollars per mile. While bid and performance bonds are not required, bidders must be responsible and capable of furnishing the material, which can be demonstrated via a written statement. Sealed bids must be submitted on the provided bid form and delivered to the Bossier Parish Police Jury office by 2:00 p.m. on December 3, 2026. If the contracted supplier cannot provide the material, they are required to procure it from an alternative source at the original contracted price.

Bossier Parish Police Jury

POSTED

DEADLINE

FY 2027 Asphalt Maltene Rejuvenating Agent Project

Solicitation # midlandtexas-877

The City of Midland in Texas is seeking solicitations for the FY 2027 Asphalt Maltene Rejuvenating Agent Project, identified by solicitation number midlandtexas-877. This local government project focuses on the procurement or application of rejuvenating agents for asphalt maintenance. The solicitation was officially posted on November 4, 2026, and the deadline for responses is November 18, 2026, at 2:00 PM. Interested parties can obtain detailed bid information by contacting the purchasing department via email or by accessing the Bonfire module through the city's official bids portal.

POSTED

DEADLINE

Sand Material Supplier (Snow and Ice Control)This subcontract agreement establishes a partnership for the supply of clean, hard, and durable uncoated quartz or rock particles to support road maintenance projects for the Town of Plainfield, Connecticut. The supplier is responsible for mining, processing, and stockpiling sand that strictly adheres to AASHTO Method T 11 gradation requirements, specifically ensuring 100% passing at 3/8 inch and a maximum of 5% passing at No. 200. To maintain these quality standards, the supplier must utilize appropriate sieve analysis equipment. The scope of work involves the delivery of up to 5,000 cubic yards of specification-compliant sand for snow and ice control. Managed by DAS Procurement for the state of Connecticut, the solicitation was posted on October 28, 2026, with a response deadline of November 19, 2026. The contract falls under NAICS code 324122 and is intended for prime contractors overseeing the municipal road maintenance efforts.

POSTED

DEADLINE

Sustainable Materials & Finishes SupplierThis subcontract opportunity is for a Sustainable Materials and Finishes Supplier to support prime contractors on GSA lease projects located in Johnson City, Tennessee. The selected supplier will be responsible for delivering permanent building materials to the site, specifically focusing on facade materials such as stone, marble, brick, stainless steel, or aluminum, as well as low-VOC sustainable interior finishes. A critical requirement for this contract is the ability to provide sustainability certifications for all supplied materials. The solicitation was posted on October 13, 2026, with a response deadline of November 13, 2026. The project is managed under the General Services Administration's PBS Office of Leasing.

Pbs Office Of Leasing

POSTED

DEADLINE

CSS-1H Asphalt Emulsion Material SupplierThis subcontract involves the supply of 30,000 gallons of CSS-1H Asphalt Emulsion for the City of Austin to support street maintenance and Full-Depth Recycling pilot projects. The selected supplier is responsible for manufacturing or sourcing materials that strictly adhere to Item No. 301S specifications and must provide industrial pumping facilities to facilitate bulk loading. To ensure quality and compliance, the supplier is required to submit materials for laboratory testing and must demonstrate a proven track record of supplying agencies of similar size and scope. The contract falls under NAICS code 324122 and focuses on providing critical materials to prime contractors operating within the city.

POSTED

DEADLINE

CSS-1H Asphalt Emulsion for in-place Pavement Pilot Project

Solicitation # IFQ 6200 kg1004

The City of Austin, through the Transportation and Public Works department, is soliciting quotes under IFQ 6200 kg1004 for the procurement of 30,000 gallons of CSS-1H Asphalt Emulsion. This material is required to support general street maintenance and a Full-Depth Recycling pilot project scheduled for November 2026, which aims to evaluate sustainable and cost-effective roadway rehabilitation techniques. The contract is awarded to the lowest offer that meets all minimum qualifications and technical specifications, specifically those outlined in Item No. 301S Asphalts, Oils, and Emulsions. Deliveries must be submitted on an FOB Destination, Prepaid and Allowed basis, with options for material to be loaded onto City trucks or delivered for an additional fee. The City reserves the right to conduct standard laboratory tests on all materials, and any non-compliant products will be rejected without payment. Contractors must provide Safety Data Sheets and certified documentation proving material specifications are met. Payment is issued within 30 days of satisfactory delivery and receipt of a properly documented invoice. Compliance requirements include mandatory Non-Discrimination, Non-Debarment, and Wage Theft certifications. Awarded contractors must complete City of Austin Wage Theft Training within 30 days of the award. Additionally, the contractor is required to maintain personnel stability throughout the engagement and adhere to all OSHA and local health and safety regulations. All shipments must be clearly marked with the City's name, address, contents, and the applicable contract number.

POSTED

DEADLINE

Fuel Oil (Burner, FS1) SupplyThe Defense Logistics Agency within the Department of Defense has established a subcontract for the supply of 33,474 liters of FS1 fuel oil, identified by NSN 9140-002474366. This fuel is intended for industrial or heating purposes and must strictly adhere to the ASTM D396 standard to ensure quality and performance. The contract specifies a unit price of 0.576120 euros per liter. This procurement falls under NAICS code 324122 and was posted on August 17, 2026.

Defense Logistics Agency

POSTED

DEADLINE

Fuel Oil SupplyThe Defense Logistics Agency within the Department of Defense has established a subcontract for the supply of fuel oil intended for heating and power generation at various military bases. This agreement specifically emphasizes the requirement for winter-grade formulations to ensure operational compliance and reliability during cold-weather conditions. The contract is categorized under NAICS code 324122 and was posted on August 17, 2026. It serves as a critical logistics effort to maintain essential energy services across military installations through the delivery of specialized fuel products.

Defense Logistics Agency

POSTED

DEADLINE

Burner Fuel Oil Supply (Multiple NSNs)This subcontract, issued by the Defense Logistics Agency under the Department of Defense, concerns the supply of burner fuel oil. The scope of work specifically covers materials identified under National Stock Numbers 9140-002474365 (FS2) and 9140-015461786 (FL2). The agreement is categorized under NAICS code 324122 and was posted on August 10, 2026. While the contract establishes the requirement for these specific fuel oil types, the exact quantities and pricing structures are not fully detailed in the provided data.

Defense Logistics Agency

POSTED

DEADLINE

Marine Gas Oil (MGO) Supply – Bulk DeliveryThis subcontract, issued by the Defense Logistics Agency under the Department of Defense, involves the supply and bulk delivery of 55,000 tank wagon units of Marine Gas Oil, identified by NSN 9140-013137776. The contract is categorized under NAICS code 324122 and requires the distribution of fuel to multiple federal facilities. The agreement focuses on the logistical execution of bulk fuel transport to ensure operational readiness across various government sites. Key administrative details include a posted date of August 10, 2026, and the coordination of deliveries through the Defense Logistics Agency's procurement framework.

Defense Logistics Agency

POSTED

DEADLINE

Marine Diesel Fuel (DSS) – Specialized Fuel for Naval FacilitiesThis subcontract, managed by the Defense Logistics Agency under the Department of Defense, involves the supply of specialized marine diesel fuel (DSS) that meets strict military specifications. The fuel is designated for use at naval facilities located in Rhode Island and Connecticut. The procurement is categorized under NAICS code 324122 and was posted on August 7, 2026. This agreement ensures that naval operations in the specified regions have access to compliant, high-grade fuel necessary for military maritime activities.

Defense Logistics Agency

POSTED

DEADLINE

Diesel Fuel Supply (DS2) – Multiple DeliveriesThis subcontract with the Defense Logistics Agency under the Department of Defense involves the supply and delivery of ultra-low sulfur diesel (DS2) to various DLA and DoD sites located throughout New England. The primary requirement is to ensure that all offloading processes are completed within a four-hour window during standard business hours. The contract is categorized under NAICS code 324122 and was posted on August 7, 2026. It is managed through the Defense Logistics Agency to support operational fuel needs across multiple delivery points in the specified region.

Defense Logistics Agency

POSTED

3 months ago

DEADLINE

N/A

AI Contract Overview

The Maryland Transportation Authority is seeking a subcontractor for the supply and delivery of hot-applied asphaltic joint sealant material. This material is intended for use on the Intercounty Connector (ICC/MD 200) as well as other MDTA facilities as requirements arise. The solicitation was posted on June 4, 2024, with a response deadline of August 7, 2024. The contract falls under NAICS code 324122, focusing on the procurement of specialized sealant materials to maintain transportation infrastructure.

General Info

Agency

Maryland Transportation Authority

NAICS

324122 - Asphalt Shingle and Coating Materials Manufacturing

Place of Performance

MD, USA

Set-Aside

NONE

Documents

This scope was carved out of BPM042298.

The full solicitation package (4 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Addendum No_ 1 - HOT APPLIED ASPHALTIC JOINT SEALANT

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedJun 4

subcontract

Response DeadlineAug 6

Deadline has passed

Submission Closed

08/06/2024, 08:00:00 PM EDT

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyMaryland Transportation Authority

ContactsNo contacts available

OfficeN/A

Organization / AgencyMaryland Transportation Authority

Office AddressN/A

ContactsNo contact information available

Full Description

Provide and deliver hot-applied asphaltic joint sealant material for use on the Intercounty Connector (ICC/MD 200) and other MDTA facilities as needed.