Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

SWET Mobile Training Team Instruction

Active

Federal

Response Deadline08/12/2026, 06:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

General Info

Agency

Department Of Defense → W6QM Micc-Ft DrumView Agency

NAICS

611512 - Flight TrainingView NAICS

Place of Performance

Fort Drum, NY, 13602, USA

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 6

subcontract

Response DeadlineAug 12

Submission deadline

Response Deadline

08/12/2026, 06:00:00 PM UTCin 6 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → W6QM Micc-Ft Drum

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → W6QM Micc-Ft Drum

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Deliver classroom and practical water egress training using SWET and HEEDS equipment for 300 military students over 10 days in accordance with AR 95-1.

Similar Contracts

Same NAICS industry code

Fort Drum SWET Training (Shallow Water Egress Training)

Solicitation # W911S226QA084

Fort Drum is seeking a contractor to provide Shallow Water Egress Training at its location in New York for approximately 300 personnel during the period from 21 September 2026 to 2 October 2026, with no training scheduled on weekends. The solicitation, identified as W911S226QA084, is a Small Business Set Aside under NAICS code 611512, and responses must be submitted via Form 1449 by the deadline of 18:00 Eastern Time on 12 August 2026. The training will be conducted entirely on Fort Drum, and the contracting office is part of the Department of Defense under the W6QM Micc-Ft Drum organization. Primary points of contact for inquiries are Chase Montgomery and Jeffery Frans, reachable via phone and email provided in the solicitation. All interested parties must comply with the submission instructions listed in the solicitation document to be considered.

W6QM Micc-Ft Drum

POSTED

about 12 hours ago

DEADLINE

Air Brake System Training Delivery – Haldex SystemsThe contract requires the delivery of comprehensive training on Haldex air brake components and system operation, with an emphasis on hands-on learning through lab exercises and real-world diagnostic scenarios. The training must equip participants with the technical knowledge and practical skills needed to understand, maintain, and troubleshoot Haldex air brake systems effectively, ensuring operational reliability and safety in transportation applications. The work is structured as a subcontract under the Texas Department of Transportation, with a posting date of August 5, 2026, and a response deadline of August 26, 2026. The North American Industry Classification System code 611512 indicates the nature of the work falls under professional and management training services, and the performance location is within Texas without further specified city or zip details.

Texas Department Of Transportation

POSTED

DEADLINE

Air Brake System Training Delivery – Meritor SystemsThe contract requires the delivery of certified, instructor-led training focused on Meritor air brake technologies, specifically targeting fleet mechanics and quality assurance personnel. The training must cover system integration, troubleshooting procedures, and preventive maintenance practices to ensure consistent, safe, and reliable performance of air brake systems in commercial vehicles. All instruction must be conducted by qualified instructors with recognized certification in Meritor systems, ensuring alignment with industry standards and manufacturer specifications. Training must be delivered in alignment with the Texas Department of Transportation’s operational needs, with performance occurring wherever the department’s personnel are located, though no specific location is designated. The opportunity is structured as a subcontract under NAICS code 611512, indicating it falls under professional and technical training services. The solicitation was posted on August 5, 2026, with responses due by August 26, 2026, and all proposals must adhere strictly to the technical and certification requirements outlined to meet the department’s compliance and safety expectations.

Texas Department Of Transportation

POSTED

DEADLINE

Air Brake System Training Delivery – Bendix SystemsThe contract is for the delivery of manufacturer-specific, hands-on, instructor-led training focused on Bendix air brake systems, targeting mechanics and QA coordinators with content covering diagnostics, maintenance, and repair procedures. The training must be delivered in a practical, real-world format to ensure participants gain applicable skills and knowledge directly tied to Bendix technology and industry standards. This is a subcontract under the Texas Department of Transportation, with a posted date of August 5, 2026, and a response deadline of August 26, 2026, indicating an active procurement window for qualified training providers. The North American Industry Classification System code 611512 confirms the nature of the work aligns with professional and technical training services. The place of performance and exact location details are not specified, allowing flexibility in where the training sessions may be conducted, but all delivery must meet the technical and operational requirements outlined for Bendix air brake systems education.

Texas Department Of Transportation

POSTED

DEADLINE

NorQuest College - Request for Proposal - Flight Attendant Training Program

Solicitation # AB-2026-05497

NorQuest College is seeking qualified vendors to provide a comprehensive Flight Attendant Training Program under solicitation number AB-2026-05497, with proposals due by August 26, 2026 at 8:00 PM Mountain Time. The goal is to establish a partnership that delivers high-quality training services aligned with industry standards while maximizing value and benefit to the College. Vendors are expected to demonstrate expertise in aviation safety, customer service, emergency procedures, and regulatory compliance, with the ability to deliver a structured, immersive, and outcome-driven curriculum tailored to meet the needs of future flight attendants. All proposals must be submitted through the Alberta Purchasing Connection portal, and the primary point of contact for inquiries is the Supply Chain Management team at rfp@norquest.ca or 999-999-9999. The program will be delivered in Alberta, and vendors must be prepared to meet all operational, logistical, and instructional requirements outlined in the request. The selection process will evaluate proposals based on technical merit, experience, cost-effectiveness, and the ability to ensure consistent delivery and student success, with fairness and transparency as core principles throughout the evaluation.

NorQuest College

POSTED

DEADLINE

On-Site Clinical Training ServicesThe contract is for the delivery of on-site clinical training services to Department of Veterans Affairs staff, specifically focused on the operation and therapeutic use of the XciteV2 system. Training will be performed at the designated location in St. Louis, Missouri, with a zip code of 63125-4199, ensuring that VA personnel receive hands-on instruction to effectively integrate the technology into clinical practice. This subcontract falls under NAICS code 611512, indicating it is categorized under other schools and instruction, and is managed by the 255-NETWORK Contract Office 15. All proposals must be submitted by the deadline of August 21, 2026, at 1:00 PM, with the solicitation posted on August 4, 2026. The contract does not specify a set-aside type, and there is no designated point of contact listed publicly.

255-NETWORK Contract Office 15 (36C255)

POSTED

DEADLINE

Small Business or DVBE Subcontracting Participation OpportunityThis opportunity is open to certified Small Business and Disabled Veteran Business Enterprise (DVBE) subcontractors seeking to engage in training or compliance-related work under a contract managed by the California Department of State Hospitals. The solicitation targets businesses certified under state programs and offers a potential 5% price preference incentive to encourage participation, aiming to increase subcontracting opportunities for disadvantaged firms. The North American Industry Classification System code is 611512, indicating the work involves other schools and instruction services, likely related to workforce training or regulatory compliance programs delivered within the state hospital system. The opportunity is posted as a subcontracting engagement with a response deadline of August 18, 2026, at 10:30 PM Pacific Time. Performance is expected to take place in Los Angeles, California, with no specific office address or point of contact listed, suggesting the procurement is administered through the state’s eProcurement system. Interested parties must submit their expressions of interest or proposals through the California eProcurement portal before the deadline, and eligibility is contingent upon holding valid Small Business or DVBE certification. No formal set-aside designation is specified, but the incentive structure is designed to promote equitable participation by certified minority and veteran-owned enterprises in state-funded activities.

California Department of State Hospitals

POSTED

DEADLINE

Electric Pallet Jack Certification TrainingThe contract requires the provision of Cal/OSHA-compliant certification training for electric pallet jacks to 90 trainees annually over a three-year period, ensuring all participants receive comprehensive safety instruction and practical hands-on evaluation. The training program must adhere strictly to California occupational safety standards and include formal documentation and reporting for each trainee’s certification status. The scope of work encompasses all aspects of instruction necessary to meet regulatory requirements, from classroom learning to live operational assessments, with a focus on workplace safety and compliance. The contract is classified as a subcontract under NAICS code 611512, issued by the California Department of State Hospitals with performance expected in Los Angeles. Although the solicitation number and point of contact are not provided, the response deadline is set for August 18, 2026, and the posting date indicates the opportunity was made available on August 4, 2026. The procurement is part of a broader effort by the state agency to maintain safe and lawful material handling operations across its facilities, and compliance with all state safety regulations is mandatory for contractors.

California Department of State Hospitals

POSTED

DEADLINE

Sit-Down Counterbalanced Forklift Certification TrainingThe contract requires delivery of Cal/OSHA-compliant forklift operator certification training for 90 trainees each year over a three-year period, ensuring full adherence to California’s occupational safety standards. Training must include classroom instruction, practical hands-on evaluations, and comprehensive recordkeeping to document completion and compliance for each participant. The program is designed to certify operators of sit-down counterbalanced forklifts and must be conducted in accordance with state regulatory requirements to maintain legal and safety compliance across all operations. The effort is managed under a subcontract arrangement tied to the California Department of State Hospitals, with performance expected to occur in Los Angeles. The North American Industry Classification System code 611512 classifies this as training and educational services, indicating a focus on workforce development through certified instruction. All training activities must be completed annually to meet the 90-trainee target, and the contractor is responsible for maintaining accurate, auditable documentation for regulatory review throughout the contract term. The solicitation was posted on August 4, 2026, with responses due by August 18, 2026.

California Department of State Hospitals

POSTED

DEADLINE

Heat Safety Plan Development & TrainingThe contract requires the development and implementation of a comprehensive bilingual heat safety plan designed to protect workers in high-temperature environments. This includes creating structured employee training programs that address heat-related hazards, establishing designated rest areas with adequate shade and ventilation, ensuring continuous access to clean drinking water, and implementing acclimatization procedures that gradually expose workers to heat to reduce the risk of heat illness. The plan must be fully accessible in both English and Spanish to ensure clarity and compliance across a diverse workforce. Training must be delivered effectively to all personnel, with documentation of participation and understanding required to meet safety standards. The work is categorized under NAICS code 611512, indicating it relates to technical and trade schools, suggesting the training component may involve educational or instructional delivery methods. The contract is a subcontract with a response deadline of September 1, 2026, and is solicited under the Arizona Finance agency. Although specific performance locations are not detailed, the scope implies field or outdoor operations where heat exposure is a significant concern. The plan must be operational and enforceable, with measurable outcomes to ensure worker safety and regulatory compliance. No set-aside provisions are specified, and the solicitation is open to qualified subcontractors capable of executing a multilingual safety and training initiative.

POSTED

DEADLINE

Cybersecurity & Compliance Training DeliveryThe contract requires the delivery of mandatory Department of Defense training modules, specifically Antiterrorism Level 1, Operations Security, and Cybersecurity 101, to ensure compliance with federal security standards. All training must be completed by personnel and certificates of completion must be submitted to the Contracting Officer’s Representative as proof of adherence. The work is classified as a subcontract under the NAICS code 611512, indicating it involves other computer-related training services. Performance is designated to take place in Chesapeake, with the performing organization expected to meet all operational and administrative requirements set forth by the Naval Surface Warfare Center, Philadelphia Division, under the Department of Defense. The solicitation was posted on July 31, 2026, and responses are due by August 14, 2026, with no set-aside provisions specified.

Nswc Philadelphia Division

POSTED

DEADLINE

Onsite Staff Training and Competency CertificationThe contract requires the provision of onsite training for Veterans Affairs clinical staff focused on the proper operation, safety procedures, and infection control protocols related to audiometer equipment. Training must be delivered directly at the designated location in San Antonio, Texas, with the goal of ensuring all participants achieve demonstrated competency through the use of standardized, VA-approved checklists that document successful skill verification. The training program must be structured to meet VA standards and must result in verifiable, auditable records of each staff member’s proficiency. This subcontract is categorized as a Small Business Set Aside under NAICS code 611512, indicating it is reserved for small businesses meeting SBA criteria. The solicitation was posted on July 31, 2026, with a response deadline of August 13, 2026, and is managed under the 257-NETWORK Contract Office 17 within the Department of Veterans Affairs. The place of performance is confirmed as San Antonio, TX 78229, and all deliverables must align with federal contracting requirements while supporting the VA’s mission to maintain high-quality audiological care through trained, certified personnel.

257-NETWORK Contract Office 17 (36C257)

POSTED

DEADLINE

More opportunities from Department Of Defense → W6QM Micc-Ft Drum

Same awarding agency

Classroom Instruction Materials and Digital Content Development

Professional and Management Development Training

POSTED

about 12 hours ago

DEADLINE

On-Site Training Logistics and Support Services

Temporary Help Services

POSTED

about 12 hours ago

DEADLINE

SWET/HEEDS Equipment and Training Aids Supply

Watch, Clock, and Part Manufacturing

POSTED

about 12 hours ago

DEADLINE

Long Range Spotting Scopes

Solicitation # W911S226U3865

The contract titled Long Range Spotting Scopes under solicitation number W911S226U3865 is a small business set aside as defined by the SBA, exclusively available to small businesses. It was originally posted on August 6, 2026, with a response deadline extended to August 20, 2026, at 6:30 p.m. Eastern Time due to restructuring by the original equipment manufacturer. The contract falls under NAICS code 327212, identifying it as related to glass product manufacturing, and is managed by the Office of W6QM Micc-Ft Drum under the Department of Defense. Performance location is designated with a zip code of 31905, while the contracting office is located at Fort Drum, New York, 13602-5220. Primary point of contact is Gregory Bissey, reachable via email at gregory.j.bissey.civ@army.mil or phone at 5206936006. The opportunity is listed as a combined solicitation, meaning it may include both purchase and other contract types, and interested parties must respond through the official SAM.gov portal.

Other Pressed and Blown Glass and Glassware Manufacturing

POSTED

about 12 hours ago

DEADLINE

Solicitation # W911S226U3955

The contract titled Security under solicitation number W911S26U3955 is a Small Business Set Aside designated for total small business participation, with a NAICS code of 561621 for security services. It is issued by the Department of Defense through the Office of W6QM Micc-Ft Drum located in Fort Drum, New York, and requires proposals to be submitted by August 14, 2026, at 4:55 a.m. Eastern Time. The solicitation is a combined announcement seeking Fotokite security systems as part of a broader requirement for security equipment and services, with detailed specifications outlined in the solicitation document. The place of performance is listed with a zip code of 22211, suggesting potential operations in the Arlington, Virginia area, though the exact location is not specified. The primary point of contact for inquiries is Anthony Zyla, reachable via email at anthony.j.zyla.civ@army.mil or by phone at 703-614-0476. All interested bidders must review the full solicitation through the provided SAM.gov link to ensure compliance with technical and procedural requirements, including any specific qualifications or certifications needed to supply the Fotokite systems and associated security infrastructure.

Security Systems Services (except Locksmiths)

POSTED

about 12 hours ago

DEADLINE

critical point dryer (CPD)

Solicitation # W911S226U3953

The contract seeks a critical point dryer (CPD) under a Small Business Set Aside designation, exclusively available to small businesses, and is classified under NAICS code 334516 for laboratory analytical instrument manufacturing. Issued by the Department of Defense through the W6QM Micc-Ft Drum office located in Fort Drum, New York, the solicitation number is W911S26U3953 and was posted on August 6, 2026, with a response deadline of August 13, 2026, at 3:00 PM Eastern Time. The primary point of contact is Robert Davis, reachable via email at robert.h.davis.civ@army.mil or phone at 5206723833, for any inquiries related to the procurement. The place of performance is specified with a zip code of 84022, though no specific city or state is provided, indicating the delivery location may be within or near that postal region. This is a combined solicitation, meaning it may include both competitive and non-competitive elements, and potential vendors must respond by the stated deadline to be considered.

Analytical Laboratory Instrument Manufacturing

POSTED

about 12 hours ago

DEADLINE

Solicitation # W911S226U3932

The contract requires a specialized lift truck designed for use with medium voltage switchgear, specifically compatible with GE Type VB1 4.16-250-2 breakers and GE PowerVac Metal-clad Switchgear. The unit must be roof-mounted with provision for PT/CPT rollout trays in the upper A compartment and feature raised switchgear pads that stand at least 79 inches high when collapsed, with a maximum reach of 122.5 inches. The lift truck must have a fixed height of 87 inches plus or minus 1.5 inches and a working reach of 69.5 inches plus or minus 2 inches, capable of safely handling a load of 900 pounds plus or minus 20 pounds. It must include a base with four swivel wheels—two in the front and two in the rear—as well as a rear-mounted winch, front and rear swivel wheels, and be collapsible for storage. Minimum clearances include 76 inches for the front aisle, 18 inches for side clearance, and a minimum 95-degree door swing. The unit must be complete with all necessary components and meet exact dimensional and operational specifications for safe and efficient field use. This solicitation, identified as W911S226U3932, is a small business set aside under NAICS code 333924, managed by the Department of Defense through the Office of W6QM Micc-Ft Drum in Fort Drum, New York. The contract opportunity was posted on August 6, 2026, with a response deadline of August 14, 2026, at 5:00 p.m. The place of performance is listed as 21702, and all inquiries should be directed to Jacqueline Boyle, the primary point of contact, via email at jacqueline.l.boyle2.civ@army.mil or by phone at 301-619-2430. The equipment must be delivered and installed to meet strict military operational standards in support of medium voltage switchgear maintenance and replacement activities.

Industrial Truck, Tractor, Trailer, and Stacker Machinery Manufacturing

POSTED

about 12 hours ago

DEADLINE

Towed Solar light tower

Solicitation # W911S226U3949

The contract is for two towed solar-powered light towers under solicitation number W911S226U3949, issued by the Department of Defense through the W6QM Micc-Ft Drum office located in Fort Drum, New York. It is a Small Business Set Aside with a NAICS code of 335139, exclusively available to small businesses, and the response deadline is August 12, 2026, at 8:30 PM Eastern Time. The equipment required consists of towable, solar-powered lighting systems designed for deployable use in field conditions, with performance expected at Fort Drum, NY. Morgan Cady is the primary point of contact, reachable via email at morgan.p.cady.civ@army.mil or by phone at 315-772-1057. This is a combined solicitation under SAM.gov, and offers must be submitted through the official portal before the deadline to be considered.

Electric Lamp Bulb and Other Lighting Equipment Manufacturing

POSTED

about 12 hours ago

DEADLINE

Solicitation # W911S226U3956

The contract titled Light Tower, solicitation number W911S26U3956, is a combined solicitation issued by the Department of Defense through the W6QM Micc-Ft Drum office located in Fort Drum, New York. It is designated as a Small Business Set Aside under the NAICS code 333120, meaning only small businesses are eligible to compete, and the entire award is reserved for this category. The solicitation was posted on August 6, 2026, with responses due by August 13, 2026. The place of performance is listed with a zip code of 22211, though specific city and state details are not provided. Primary point of contact for inquiries is John Freeland, reachable via email at john.a.freeland.civ@army.mil or by phone at 703-614-1111. The contract opportunity can be viewed online through the SAM.gov portal.

Construction Machinery Manufacturing

POSTED

about 12 hours ago

DEADLINE

Solicitation # W911S226U3945

The contract titled Rocket Parts, identified by solicitation number W911S226U3945, was posted on August 6, 2026, with a response deadline of August 12, 2026, at 8:30 PM Eastern Time. It is a combined solicitation under a Small Business Set Aside - Total designation, ensuring eligibility is restricted to small businesses. The North American Industry Classification System code 339999 identifies the scope as miscellaneous manufacturing, specifically encompassing rocket parts. The contracting office is the W6QM Micc-Ft Drum under the Department of Defense, located at Fort Drum, New York, with a zip code of 13602-5220. The place of performance is listed with a zip code of 10996, though the city and state are unspecified. Jessica Kelley serves as the primary point of contact, reachable via email at jessica.l.kelley24.civ@army.mil or by phone at 845-938-4955. The contract requires submission of updated quantities for rocket parts and is accessible through the SAM.gov platform under the provided UI link.

All Other Miscellaneous Manufacturing

POSTED

about 12 hours ago

DEADLINE

UV Laser Engraver

Solicitation # W911S226U3833

The contract titled UV Laser Engraver is a combined solicitation issued under solicitation number W911S226U3833 by the Department of Defense, specifically through the W6QM Micc-Ft Drum office located in Fort Drum, New York. It is designated as a Small Business Set Aside - Total, meaning only small businesses are eligible to compete, and it falls under the NAICS code 333517, which pertains to laser equipment manufacturing. The response deadline was extended from August 6, 2026, to August 14, 2026, at 6:20 p.m., providing vendors additional time to submit proposals. The place of performance is listed with a zip code of 31905, likely corresponding to a military or government facility in that region. Primary point of contact for inquiries is Gregory Bissey, reachable via email at gregory.j.bissey.civ@army.mil or phone at 5206936006. The solicitation is accessible through the SAM.gov portal for further details and submission.

Machine Tool Manufacturing

POSTED

about 12 hours ago

DEADLINE

All-Terrain Vehicle

Solicitation # W911S226U3961

The U.S. Department of Defense through the Office of W6QM Micc-Ft Drum is seeking proposals for an All-Terrain Vehicle under solicitation number W911S226U3961, which was posted on August 6, 2026, with responses due by August 13, 2026, at 5:00 p.m. This is a combined solicitation set aside exclusively for small businesses as defined by the Small Business Administration, classified under NAICS code 336999 for other transportation equipment manufacturing. The contract will be performed at Fort Drum, New York, with a ZIP code of 13602, and all deliverables must meet the operational and technical requirements specified by the agency. Steven Larue serves as the primary point of contact, reachable via phone at 315-772-5901 or email at steven.c.larue.civ@army.mil, and is responsible for answering inquiries and facilitating communication throughout the procurement process. The opportunity is accessible through the SAM.gov platform for registered vendors seeking to submit bids under the Small Business Set Aside Total category.

All Other Transportation Equipment Manufacturing

POSTED

about 12 hours ago

DEADLINE