This Government Contract opportunity from Texas was posted on September 7, 2025. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Technical Compliance and Quality Assurance for Equipment Deliveries

Closed

State & Local

Submission Closed09/12/2025, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 541330

New

GLCA 318882 - Provide Lake Access to Bullfrog Area

Solicitation # glca-318882-provide-lake-access-bullfrog-area

This solicitation, issued by WW Clyde & Co, seeks design services to provide lake access to the Bullfrog Area in Utah. The scope of work includes the design of a 150-foot-wide concrete launch ramp with a 10.5% grade servicing water surface elevations between 3700 and 3450, a 16-acre asphalt parking area, and a two-lane asphalt access road connecting the parking area to US 276. The project is set aside for small businesses, including SDVOSB, WOSB, HUBZone, and SDB designations, and specifically includes an Indian Small Business Economic Enterprise requirement. Interested parties must respond by November 12, 2026. The primary point of contact for this opportunity is Chanel Hope.

POSTED

DEADLINE

Business Impact Analysis and Update Disaster Recovery Plan Services – Inland Empire Utilities Agency

Solicitation # business-impact-analysis-update-disaster-recovery-plan-services-inland-empire-utilities-agency

Aanko Technologies Inc. is soliciting certified Disadvantaged Business Enterprise and Small Business Enterprise sub-consultants and suppliers to provide professional services for the Inland Empire Utilities Agency in San Bernardino and Riverside Counties, California. The scope of work focuses on emergency management, business continuity planning, technical writing, data collection, and the updating of IT and disaster recovery plans. Relevant expertise should align with NAICS codes for administrative management, engineering services, computer systems design, and public relations. Interested parties must submit their responses by November 17, 2026. The primary point of contact for this opportunity is Liz Jordan-Wettstein. This solicitation specifically targets DBE-certified firms to support the critical infrastructure and operational resilience of the utility agency.

Aanko Technologies Inc.

POSTED

DEADLINE

Infrastructure Improvement Plan (IIP) Development

POSTED

DEADLINE

Structural Observation EngineerThis subcontract opportunity is for a Structural Observation Engineer to support prime consultants on seismic retrofit projects managed by the Mayor's Office of Housing and Community Development in San Francisco. The selected professional will be responsible for performing high-level structural observations to ensure that all retrofit implementations align strictly with building codes and the original design intent. A key deliverable for this role is the production of detailed structural observation reports. Qualified candidates must hold a Professional Engineer licensure to be eligible for this position. The solicitation was posted on November 5, 2026, with a response deadline of November 26, 2026. This engagement falls under NAICS code 541330, focusing on specialized engineering services to enhance the seismic resilience of city infrastructure.

Mayor's Office of Housing and Community Development

POSTED

DEADLINE

Certified Welding Inspector (CWI)This subcontract opportunity is for a Certified Welding Inspector to provide specialized inspection services for seismic retrofit projects managed by the Mayor's Office of Housing and Community Development in San Francisco. The selected contractor will work under prime consultants to perform visual and non-destructive testing on structural steel welding and single-pass fillet welds, ensuring all work meets established codes and delivering certified inspection reports to verify weld integrity. The solicitation was posted on November 5, 2026, with a response deadline of November 26, 2026. Classified under NAICS code 541330, this engagement focuses on technical engineering and inspection services essential for the safety and compliance of municipal infrastructure projects within California.

Mayor's Office of Housing and Community Development

POSTED

DEADLINE

Electrical Engineering Consultant (Power Systems)

Engineering & Facilities

POSTED

DEADLINE

Traffic Engineering Consultant

Engineering & Facilities

POSTED

DEADLINE

Hydraulic Engineering Specialist

Engineering & Facilities

POSTED

DEADLINE

Geotechnical Engineering Sub-consultant

Engineering & Facilities

POSTED

DEADLINE

Malibu Canyon - Las Virgenes Road Pipeline and Pump Station Conceptual Engineering Feasibility and Fatal Flaw Analysis Study

Solicitation # 2026-RFP-051

The Las Virgenes Municipal Water District is soliciting proposals under solicitation 2026-RFP-051 for a Conceptual Engineering Feasibility and Fatal Flaw Analysis Study. The project involves evaluating the technical feasibility, constructability, and permissibility of a treated water transmission pipeline and pump station connecting the Pacific Coast Highway area to Agoura Road via Malibu Canyon and Las Virgenes Road. This infrastructure is intended to potentially support the conveyance of desalinated ocean water or provide an interconnection with Los Angeles County Waterworks District 29. The study must objectively identify fatal flaws that could impair the project, specifically addressing challenges such as shallow hard bedrock, narrow roadways, and high traffic volumes. Key deliverables include draft and final feasibility reports, capital and operational cost estimates, a project schedule, and a risk register, with analysis covering pipeline diameters from 16 to 54 inches. Proposals are due by December 4, 2026, and will be evaluated based on a weighted system: proposal cost (30%), design expertise (15%), personnel experience and qualifications (15%), and project schedule and management (15%). The selected consultant must provide a Project Manager registered as a Professional Engineer in the State of California and maintain 1 million dollars in professional liability insurance. Contractual requirements include compliance with California prevailing wage laws and equal opportunity employment standards. Payment will be made within 45 days of receiving monthly itemized statements. The District will utilize TIFF and PDF files for the study as AutoCAD drawings for the area are unavailable.

Engineering & Facilities

POSTED

DEADLINE

Specialized Building Condition Assessment SupportThis subcontract for Specialized Building Condition Assessment Support involves providing detailed visual inspections of building systems for prime contractors working on facility projects for the Province of British Columbia's Ministry of Environment and Parks. The scope of work focuses on evaluating interior finishes, MEP systems, security components, accessibility, and fire and life safety systems. The selected provider is responsible for documenting all identified deficiencies through photography and assigning specific statuses to various components. Final deliverables include raw inspection data, comprehensive component status lists, and supporting deficiency photographs. This opportunity is categorized under NAICS code 541330 and is based in Canada.

Ministry of Environment and Parks

POSTED

DEADLINE

Critical Area Ordinance Update & Regulatory AnalysisThis subcontract opportunity involves a comprehensive review and rewriting of County Code Chapter 68 for prime contractors working on Dorchester County Council Planning and Zoning projects. The selected provider will analyze Zoning Ordinances, Comprehensive Plans, and Subdivision Regulations to ensure full consistency with Maryland Natural Resources Article 8-1809. Key deliverables include the development of forest and woodland protection programs, the coordination of growth allocation recordation, and the delivery of a final updated Critical Area Ordinance. The project falls under NAICS code 541330 and is based in Maryland. While not mandatory, AICP certification is preferred for the performing party. Interested parties must submit their responses by the deadline of December 2, 2026.

POSTED

about 13 hours ago

DEADLINE

in 27 days

AI Contract Overview

This subcontract for the Dallas Area Rapid Transit agency focuses on technical compliance and quality assurance for equipment deliveries. The selected provider will be responsible for conducting pre-shipment inspections, testing, and detailed documentation to ensure that all motors and inverters strictly adhere to the agency's technical specifications and quality standards. The opportunity was posted on September 7, 2025, with a response deadline of September 12, 2025. Classified under NAICS code 541330, the contract ensures that critical hardware is verified for performance and reliability before shipment to the agency.

General Info

Agency

Texas → Dallas Area Rapid Transit

NAICS

541330 - Engineering Services

Place of Performance

TX, USA

Set-Aside

NONE

Documents

This scope was carved out of 2094984.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

FAN, 230VAC , 4656ZWU-956 , INVERTER | ref 2094984

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedSep 7

subcontract

Response DeadlineSep 12

Deadline has passed

Submission Closed

09/12/2025, 07:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyTexas → Dallas Area Rapid Transit

ContactsNo contacts available

OfficeN/A

Organization / AgencyTexas → Dallas Area Rapid Transit

Office AddressN/A

ContactsNo contact information available

Full Description

Provide pre-shipment inspection, testing, and documentation to verify motors and inverters meet DART's technical specifications and quality standards.