Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →

Technical Compliance Testing and Pre-Delivery Inspection Services

Active
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The US Embassy Conakry, under the Department of State, is seeking a subcontractor to provide technical compliance testing and pre-delivery inspection services for tanker-trucks. The primary objective of this contract is to conduct independent pre-shipment inspections and performance testing to ensure all vehicles comply with FMCSA, EPA, ISO, and other specified component standards. The project will be performed in Conakry, with the solicitation posted on August 24, 2026. Interested parties must submit their responses by the deadline of September 10, 2026. This requirement falls under NAICS code 541330 for engineering services.

General Info

US Embassy Conakry seeks subcontractor for tanker-truck compliance testing and pre-delivery inspections.

Agency

Department Of State → US Embassy ConakryView Agency

NAICS

541330 - Engineering ServicesView NAICS

Place of Performance

CONAKRY, GN-C, GIN

Set-Aside

NONE

Documents

This scope was carved out of 19GV1026Q0013VERSION2.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

PUBLIC NOTICE & RE-SOLICITATION NO: 19GV1026Q0013 - VERSION 2

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

Posted

subcontract

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of State → US Embassy Conakry
ContactsNo contacts available
OfficeN/A
Organization / Agency
Department Of State → US Embassy Conakry
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Independent pre-shipment inspection and performance testing of the tanker-truck to verify compliance with FMCSA, EPA, ISO, and specified component standards.

Similar Contracts

Same NAICS industry code

NAICS: 541330
New
Corydon Well Replacement (C2305)
Solicitation # C2305
Ardurra Group, Inc. is soliciting proposals for the Corydon Well Replacement Project (Work Order C2305) on behalf of the Elsinore Valley Municipal Water District in California. This professional services agreement seeks qualified DBE firms to provide comprehensive design, bidding support, and engineering services during construction. The scope is divided into two phases: Phase 1 focuses on civil site design, technical specifications, and construction management for the drilling of a new well and the abandonment of the existing one; Phase 2 covers architectural, civil, mechanical, structural, electrical, and I&C design drawings, as well as equipping, testing, and commissioning. Technical requirements specify the use of 24-inch diameter stainless steel Ful-Flo louvered well screens and compliance with AWWA potable water well construction standards, Riverside County, and California State Water Resources Control Board regulations. The contract is set aside for small and disadvantaged businesses, including DBE, WOSB, and SDVOSB entities. Award selection is based on the most advantageous proposal, considering both price and other factors. Key requirements include the provision of performance and payment bonds for 100 percent of the contract price, a bid guarantee of five percent, and adherence to California prevailing wage laws. Consultants must maintain active SAM registration and provide a project manager as the primary point of contact. Payment is processed via monthly itemized statements, with a 45-day review and payment cycle. Proposals must be submitted via PlanetBids by September 1, 2026, and must include a cover letter, a detailed project approach, staff resumes, a five-year representative project list, and three professional references.
Ardurra Group, Inc.

POSTED

about 14 hours ago

DEADLINE

in 6 days
View Details

More opportunities from Department Of State → US Embassy Conakry

Same awarding agency

NAICS: 441110
Federal
Toyota HiAce Commuter GL (2026) – Cargo Van Configuration
Solicitation # Procurement
The United States Embassy in Conakry, Guinea is soliciting quotes for a 2026 Toyota HiAce Commuter GL Cargo Van with a long wheelbase, left-hand drive, and a 2.8L turbo diesel engine (1GD-FTV), specified by model code GDH322L-PRANKV. The vehicle must be equipped with a rear hydraulic or electric lift platform for accessibility, feature a fully enclosed cargo bay with anchor points, non-slip flooring, a wide rear door, and high roof clearance. Additional requirements include a six-speed automatic transmission, rear-wheel drive, 3860 mm wheelbase, 5915 mm overall length, 1500 kg braked towing capacity, and 235/65 R16 tires. The van must be delivered to the port of Conakry, with the embassy handling customs and final transport. Offers must be submitted electronically by August 28, 2026, at 11:59 PM GMT to ConakryProc@state.gov, referencing solicitation number 19GV1026Q0017, and must be divided into separate technical and financial submissions. All vendors must be registered in the System for Award Management (SAM), comply with FAR and DOSAR clauses including 52.204-24, 52.204-25, and 52.204-26 regarding prohibited telecommunications equipment, and include completed representations and certifications per FAR 52.212-3. Award will be made to the lowest priced, technically acceptable offeror. Technical inquiries should be directed to Francis KAMANO at kamanoF@state.gov.
New Car Dealers

POSTED

19 days ago

DEADLINE

in 3 days
View Details
NAICS: 8113
Federal
PREVENTIVE MAINTENANCE SERVICE CONTRACT FOR STANDBY DIESEL GENERATORS
Solicitation # 19GV1026Q0015
The United States Embassy in Conakry has awarded a firm fixed-price contract for comprehensive preventive maintenance and inspection services on its low-voltage diesel standby generator systems, including optional support for load banks, automatic transfer switches, and day tanks. The base contract period is one year, with four optional one-year renewals, for a maximum total duration of five years, with performance beginning October 1, 2026. The scope requires two scheduled maintenance visits annually: a semi-annual service every six months and an annual service, both within a 30-day window around the scheduled date. Maintenance must strictly adhere to OEM manufacturer recommendations and comply with NFPA 70, 110, 111, and 30 standards. The generator systems include three CAT units, two 2000 kW Avtron load banks, three ASCO 7000 series automatic transfer switches, and three above-ground day tanks. Contractors must provide all labor, tools, safety equipment, and consumables such as filters, fluids, grease, batteries, and thermostats, while excluding major hardware replacements like injectors, pistons, or bearings unless separately quoted and approved. Hour-based maintenance triggers must be tracked and addressed, with operating hours recorded at every visit and the Contracting Officer’s Representative notified when thresholds are approached. Emergency support must be available within 24 hours of request, priced at an hourly rate, with strong preference for local vendors with verifiable operations in Conakry. The contractor is required to submit a detailed strategic plan, OEM certification for all equipment types, proof of SAM registration, and evidence of necessary licenses and permits to operate in Guinea. Personnel must undergo police clearance verification, and all technicians must be qualified to work on the specified systems and comply with lockout/tagout procedures, PPE use, and hazardous material handling. Fuel and oil samples must be sent to qualified labs for analysis, with reports delivered within 30 days, and proof of proper disposal of waste oils, batteries, coolant, and other hazardous substances must be provided after each service. Load bank testing requires running generators at 75–80% of rated capacity for a minimum of two hours, with data collected on voltage, frequency, amperage, temperature, and fuel consumption. Automatic transfer switches require separate semi-annual and annual inspections with de-energized access for deep cleaning, contact inspection, and verification of neutral-to-ground bonding configurations in accordance with system design. Day tanks require semi-annual visual
Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

22 days ago

DEADLINE

in 13 days
View Details