Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Technical Documentation & Knowledge Transfer

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract, titled Technical Documentation & Knowledge Transfer, is a subcontract issued by the Naval Research Laboratory under the Department of Defense to develop comprehensive integration documentation, system diagrams, and operational procedures that will enable internal understanding and sustained maintenance of critical systems. The deliverables include detailed technical documentation and training materials specifically designed for government engineers to ensure continuity of operations and institutional knowledge retention. The work is scoped to support long-term operational readiness by translating complex technical systems into accessible, usable formats tailored to the Navy's internal teams. Performance of this contract is centered in Washington, with a zip code of 20375, and falls under the NAICS code 541611, which corresponds to management consulting services. The contract was posted on June 30, 2026, and while no set-aside status or solicitation number is provided, the focus remains on knowledge transfer and documentation rather than hardware or direct system development. The deliverables aim to bridge the gap between technical implementation and operational sustainability, ensuring that government personnel are fully equipped to maintain and evolve the systems without external dependency.

General Info

Create detailed technical docs and training for Navy engineers to ensure long-term system maintenance and knowledge retention.

Agency

Department Of Defense → Naval Research LaboratoryView Agency

NAICS

541611 - Administrative Management and General Management Consulting ServicesView NAICS

Place of Performance

Washington, DC, 20375, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJun 30

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Naval Research Laboratory

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Naval Research Laboratory

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Development of integration documentation, system diagrams, and operational procedures to support NRL’s internal understanding and future maintenance, including training materials for government engineers.

Similar Contracts

Same NAICS industry code

Export-Controlled Technical Data Management (ITAR/EAR)This contract requires the management of ITAR and EAR-controlled technical data under strict compliance protocols, ensuring that only personnel who are both JCP-certified and trained in export regulations are permitted to access or handle such data. The scope of work centers on maintaining adherence to DFARS 252.225-7048, which outlines safeguarding requirements for controlled technical information within the Department of Defense supply chain. All activities must be conducted with rigorous oversight to prevent unauthorized disclosures and ensure compliance with U.S. export control laws. The contract is designated as a subcontract under a HUBZone Set-Aside, reflecting a preference for small businesses located in historically underserved zones. It falls under the NAICS code 541611 for administrative management and general management consulting services, indicating a focus on operational and compliance oversight rather than direct manufacturing or technical development. The solicitation is posted by the ASC COMMODITIES DIVISION under the Department of Defense, with a response deadline of August 5, 2026, and all performance obligations must be fulfilled in alignment with federal export control standards regardless of physical location.

ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

CMMC SSP & POA&M DevelopmentThe contract requires the development and ongoing maintenance of a System Security Plan and Plan of Action & Milestones compliant with CMMC and NIST standards, ensuring continuous audit readiness and timely annual updates. Responsibilities include aligning documentation with current federal cybersecurity frameworks, tracking remediation activities, and maintaining accurate records to support compliance assessments. The work is classified as a subcontract under NAICS code 541611, indicating it involves administrative management and general management consulting services focused on cybersecurity. The solicitation was posted on July 22, 2026, with a response deadline of August 20, 2026, and is managed by the Department of Defense through the LAND SUPPLY CHAIN organization. The place of performance and exact location details are not specified, but all work must support the defense supply chain's cybersecurity posture in accordance with federal mandates.

LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

CMMC Supply Chain Compliance ManagementThe contract requires the development and enforcement of subcontractor flow-down clauses to ensure all lower-tier vendors adhere to the Cybersecurity Maturity Model Certification and NIST Special Publication 800-171 standards. This involves implementing structured processes to audit subcontractor compliance, collecting System Security Plans, and maintaining a centralized supplier compliance registry to track adherence across the supply chain. The work is critical to safeguarding controlled unclassified information within the defense industrial base and demands rigorous monitoring and documentation practices to meet federal cybersecurity requirements. All awarded parties must establish clear accountability mechanisms for subcontractors, including verification protocols and corrective action workflows, to ensure continuous compliance. The effort is scoped under the NAICS code 541611 for management consulting services and is issued by the Department of Defense under LAND SUPPLY CHAIN. Responses are due by August 20, 2026, with the solicitation published on July 22, 2026, indicating a focus on proactive supply chain risk mitigation aligned with defense cybersecurity mandates.

LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

CMMC Certification Readiness & ImplementationThe contract requires comprehensive support to achieve CMMC certification by conducting a gap assessment against CMMC requirements, developing a complete System Security Plan, and implementing all missing security controls to align with DFARS 252.204-7012 and NIST SP 800-171 standards. The scope encompasses evaluating current cybersecurity practices, identifying deficiencies relative to the required CMMC maturity level, and executing targeted remediation measures to ensure full compliance. The deliverable includes preparing the organization for an official CMMC assessment, ensuring all documentation, policies, and technical controls are in place and properly documented. All work must be completed in accordance with Department of Defense specifications and is classified as a subcontract under NAICS code 541611, targeting organizational readiness through technical and procedural enhancements. The solicitation is managed by the Land Supply Chain under the Department of Defense, with a response deadline of August 20, 2026, and no set-aside provisions specified. Performance is expected to meet federal cybersecurity obligations without geographic restriction, and while no point of contact is listed, all submissions must adhere to the DIBBS platform guidelines for the listed solicitation number.

LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

Supply Chain Traceability & Documentation ServicesThe contract requires the provision of comprehensive documentation and record-keeping services to ensure complete traceability across the supply chain in strict adherence to DLAD C03, DFARS, FAR, and DLA directives. The scope centers on maintaining accurate, auditable records that support compliance with federal defense procurement standards, ensuring that every component and transaction within the supply chain can be verified and tracked from origin to final delivery. This includes the implementation of systems and protocols that meet the rigorous data integrity and reporting requirements mandated by the Department of Defense. This subcontract, issued under NAICS code 541611 by the ASC Commodities Division, is open for response until July 29, 2026, with all work expected to support defense logistics operations. While specific performance locations and point of contact details are not provided, the requirement is tied to Department of Defense activities and demands a high level of precision in documentation processes. Contractors must be prepared to deliver services that enable full transparency and accountability, with potential audits and inspections ensuring alignment with all applicable regulatory frameworks.

ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

Technical Reporting and Documentation

POSTED

about 8 hours ago

DEADLINE

Inventory Management and ReportingThe contract titled Inventory Management and Reporting requires the maintenance of accurate digital inventory records and the regular generation of monthly usage and delivery reports to support audit requirements and operational planning. The work is designated as a subcontract under NAICS code 541611 and is managed by the Public Works Department of the BSFMD in California. The solicitation was posted on July 21, 2026, with a response deadline of August 4, 2026, at 10:00 PM PST. All performance activities are expected to take place within California, though no specific city or address is provided. The contract emphasizes precision in recordkeeping and timely reporting to ensure transparency and support efficient resource allocation for public works operations.

Public Works Department, BSFMD

POSTED

about 21 hours ago

DEADLINE

Security Compliance and CJIS/PCI/HIPAA ImplementationThe contract requires the implementation and documentation of comprehensive security controls to ensure compliance with CJIS, PCI DSS, and HIPAA standards. This includes deploying technical safeguards such as encryption for sensitive data, robust audit logging to track access and modifications, and proactive malware protection to defend against cyber threats. All measures must be thoroughly documented to demonstrate adherence to regulatory requirements and to facilitate audits or inspections by oversight bodies. The work is structured as a subcontract under the Public Works Department, BSFMD, in California, with a posted date of July 21, 2026, and a response deadline of August 4, 2026. The NAICS code 541611 indicates this is related to computer systems design services, aligning with the technical nature of the security implementation tasks. Although specific location details are not provided, performance is expected within California, and the project seeks qualified subcontractors capable of delivering fully compliant, well-documented security solutions tailored to the stringent demands of law enforcement, financial, and healthcare data environments.

Public Works Department, BSFMD

POSTED

about 21 hours ago

DEADLINE

Pre-Bid Site Assessment and Operational ConsultingContractors are required to conduct pre-bid site visits and deliver operational consulting services to ensure full compliance with tunnel dimensions, loading protocols, and scheduling constraints necessary for a successful bid submission. The work focuses on evaluating physical site conditions and providing expert guidance to align proposal inputs with technical and logistical requirements, mitigating risks before formal bids are prepared. This subcontract opportunity is posted by the state of Utah under NAICS code 541611, with responses due by August 13, 2026, and is available through the Utah BonfireHub platform. All activities must be completed in time to support accurate and compliant bid development, with no set-aside provisions specified.

POSTED

about 21 hours ago

DEADLINE

Single Audit Services (Uniform Guidance 2 CFR 200)The contract seeks qualified providers to perform Single Audit services in accordance with the Uniform Guidance outlined in 2 CFR 200, focusing on the examination of federal fund usage, evaluation of internal controls over federal awards, and reporting of audit findings. The work requires adherence to federal standards for auditing state and local governments, nonprofit organizations, and other entities receiving federal funds, ensuring accuracy, compliance, and transparency in financial reporting related to federal programs. Auditors must be able to identify federal expenditures, assess risk, test control effectiveness, and issue clear, actionable findings that meet federal requirements. Subcontractors responding to this opportunity must submit proposals by the deadline of August 5, 2026, and are expected to have the expertise and credentials to conduct audits under the Single Audit Act. The North American Industry Classification System code 541611 indicates the work falls under management consulting services, specifically financial auditing. While the agency is listed as Utah with no specific office address or point of contact provided, the place of performance is not defined, allowing for potential remote or statewide service delivery. Interested parties should access the opportunity via the provided link to ensure full compliance with submission protocols and requirements.

POSTED

about 22 hours ago

DEADLINE

State Compliance Testing (Utah Auditor’s Office Requirements)The contract requires the performance of compliance testing in accordance with standards set by the Utah State Auditor’s Office to verify adherence to state-specific financial and operational regulations. This subcontract is focused on ensuring that all applicable state mandates are met through systematic evaluation and reporting, with the work to be conducted in alignment with the auditor’s requirements. The solicitation, posted on July 21, 2026, has a response deadline of August 5, 2026, and is classified under NAICS code 541611, indicating it pertains to management consulting services related to compliance and regulatory support. The place of performance and organizational details are not specified in the provided data, but the contracting entity is identified as the state of Utah without further administrative division or office address. There is no set-aside designation for small businesses or other categories, and no point of contact is listed. Interested parties must submit their responses through the provided Utah-based BonfireHub portal by the stated deadline to be considered for award. The scope centers entirely on audit readiness and regulatory compliance, with no mention of additional deliverables beyond testing and reporting as mandated by the state auditor’s office.

POSTED

about 22 hours ago

DEADLINE

Immigration Reform and Control Act (IRCA) Compliance SupportThe contract requires full support for compliance with the Immigration Reform and Control Act (IRCA) by verifying the employment eligibility of all workers, including subcontractors, and maintaining accurate I-9 documentation in accordance with federal regulations. This involves conducting timely and rigorous screenings to ensure that all individuals engaged in work under the contract possess proper authorization to work in the United States, with meticulous recordkeeping to demonstrate adherence to IRS and DHS requirements. The scope encompasses end-to-end management of I-9 forms, including proper completion, retention, and audit readiness, with a focus on minimizing exposure to legal or financial penalties. The contract is classified as a subcontract under NAICS code 541611 and is issued by the Arizona office of Water Services with a response deadline of August 11, 2026. There is no set-aside designation specified, and the place of performance and primary office address are not detailed in the provided data. The work performed must align with federal immigration compliance standards and be scalable to accommodate a workforce that includes third-party contractors, with the expectation of consistent, accurate, and auditable documentation practices throughout the duration of the contract.

POSTED

about 22 hours ago

DEADLINE

More opportunities from Department Of Defense → Naval Research Laboratory

Same awarding agency

PoE Physical Access Control System Expansion

Security Systems Services (except Locksmiths)

POSTED

about 8 hours ago

DEADLINE

FLIR X6983HS MWIR Camera

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 8 hours ago

DEADLINE

CIP Air Pressure Tank

Metal Tank (Heavy Gauge) Manufacturing

POSTED

about 8 hours ago

DEADLINE

Oscilloscope, 1GHz, 4ch Configuration

Electronic and Precision Equipment Repair and Maintenance

POSTED

DEADLINE

Inconel and Titanium PartsThis solicitation, numbered N0017326Q5244, is a total small business set-aside issued by the Naval Research Laboratory under the Department of Defense for the procurement of Inconel and Titanium parts, specifically classified under NAICS code 332510 with a small business size standard of 750 employees. The procurement is conducted on a Firm-Fixed-Price basis using the Lowes Price Technically Acceptable evaluation method, where offers must first meet all minimum technical requirements as defined in the RFQ specifications to be considered acceptable; failure to meet these requirements renders an offer ineligible regardless of price. The contract involves manufacturing precision components using CNC machining and sheet cutting with a tight tolerance of 0.005 inches (0.13mm) and a surface roughness of 125 μin (3.2 μm Ra), requiring materials such as Titanium Grade 2, INCONEL 625 conforming to API 6A, and MONEL K-500 aged to ASTM B865 standards. Each part must be accompanied by a formal dimensional inspection report and comply strictly with MIL-STD-130 for unique item identification and MIL-STD-129 for shipment and storage labeling, with verification performed using automatic identification technology. Delivery is required by June 30, 2026, to the NRL Marine Corrosion Facility in Key West, Florida, with FOB Destination being the preferred method of shipment. All submissions must be made via email to Richard Key, the designated purchasing agent, and must include a signed and dated SF 1449 form, the company’s DUNS number and CAGE code, and a statement confirming acceptance of all terms and conditions without modification. Offerors must be registered in the System for Award Management (SAM) and comply with applicable clauses including Safeguarding Covered Defense Information, Prohibition of Hexavalent Chromium, Buy American provisions, and prohibitions on acquiring covered telecommunications equipment. Additionally, contractors must adhere to requirements for Electronic Submission of Payment Requests and Receiving Reports via the Wide Area WorkFlow system. The solicitation is open only to small businesses, including HUBZone and Service-Disabled Veteran-Owned Small Businesses, and responses are due by June 8, 2026, at 7:00 AM local time.

Hardware Manufacturing

POSTED

DEADLINE

Evaluation Computer CardsThe U.S. Naval Research Laboratory is soliciting quotations for Evaluation Computer Cards under a combined synopsis/solicitation numbered N00173-26-Q-1301367512, issued as a Total Small Business set-aside pursuant to FAR 19.502-2(a). This is a Firm Fixed-Price procurement under NAICS code 334418 and FSC/PSC 5998, requiring brand name or equal products as defined by FAR 52.211-6, with all items must be new, covered by the manufacturer’s warranty, and sourced exclusively through an Original Equipment Manufacturer, authorized dealer, distributor, or reseller who can provide full OEM warranty and service support. Offerors must submit documentation proving their authorized status and include their DUNS number and Cage Code with their quotation, which must be sent via email and conform to all solicitation terms without modification unless specifically noted. The delivery address is the Naval Research Laboratory in Washington, DC, with FOB Destination preferred. Responses are due by July 24, 2026, at 11:00 AM EDT, and must be submitted electronically to Marche Hampton at Marche.T.Hampton.civ@us.navy.mil. All offerors must have an active registration in the System for Award Management (SAM) as of the submission deadline. Evaluation will follow the Lowest Price Technically Acceptable method, where quotes are first ranked by price, then assessed for technical acceptability based on meeting all specified requirements. Technically unacceptable offers are eliminated, and the process continues with the next lowest-priced submission until a technically acceptable and fair-priced offer is found. Options, if included, will be evaluated as part of the total price and may render an offer unacceptable if unbalanced. The Government will not conduct discussions or negotiations, and award will be made to the offer deemed most advantageous based on price and technical compliance. Late submissions will be handled per FAR 52.212-1(f), and only emailed responses will be accepted.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

DEADLINE

NRL Robotics Industry DayThe Naval Research Laboratory is seeking industry partners to participate in a site visit and demonstration focused on the commissioning and upgrading of an existing robotic system to a desired future state, with the goal of enhancing operational capabilities. This effort is being conducted under solicitation number N0017326RFIGF12, issued as a sources-sought notice with no set-aside designation, and is open to all qualified contractors. The event is scheduled with a response deadline of August 3, 2026, and all interested parties must register in advance to attend. The work is expected to take place at the NRL facility in Washington, D.C., with all performance conducted at the specified location. Participation requires adherence to Department of Defense security protocols, including completion of the SECNAV 5512/1 form, which mandates identity verification, background checks including NCIC screenings, and biometric data collection for base access. Applicants must provide proof of citizenship or legal alien status, and all personnel require approval prior to entering the installation. Point of contact for inquiries and registrations is Graham W.J. Fisher, with Ryan Wheelock as secondary contact, both reachable through official Navy email addresses and phone numbers. All submissions and registrations must be completed by the stated deadline to be considered for potential future contract opportunities.

Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

DEADLINE

Research and Development Efforts for High Performance ComputingThe U.S. Naval Research Laboratory is modifying its existing Task Order N0017320F2029 with Arcfield to continue specialized Research, Development, Testing, and Evaluation services on a sole-source basis, citing statutory authority that confirms Arcfield is the only responsible offeror capable of meeting the agency's unique requirements. This bridge action extends the period of performance by six months, from 29 July 2026 through 28 January 2027, to ensure uninterrupted support for the Information Technology Division located in Washington, DC. The work focuses on enhancing end-to-end computer network performance across the entire enterprise, encompassing all layers of the network stack including displays, graphical user interfaces, data management, storage systems, security protocols, and governing policies, spanning from the tactical edge to the High Performance Networking Center. The contract remains under the NAICS code 541715 for Scientific Research and Development Services, with no set-aside provisions, and is managed by the Department of Defense through the Naval Research Laboratory. Proposals are due by 20:00 Eastern Time on 27 July 2026, and performance will occur at the laboratory’s facility in Washington, DC, with primary point of contact being Connor Murphy and secondary contact Sonya Diaz De Leon. This modification ensures sustained technical expertise and operational continuity critical to advancing naval high-performance computing capabilities without disruption.

Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

DEADLINE

RespiratorsThe Naval Research Laboratory is soliciting quotations for respirators under a combined synopsis/solicitation issued as a Total Small Business Set-Aside, with the North American Industry Classification System code 339115 and Federal Supply Code 4240. This procurement is on a Firm Fixed-Price basis and strictly requires brand-name or equal equipment, with all items being new, covered by the manufacturer’s warranty, and sourced only through Original Equipment Manufacturers or their authorized dealers, distributors, or resellers. Offerors must provide documented proof of authorization from the manufacturer and confirm compliance with all terms and conditions without modification, unless explicitly listed as exceptions. The equipment must be delivered to the U.S. Naval Research Laboratory in Washington, DC, with FOB Destination preferred, and all submissions must include the company’s DUNS number and Cage Code. Quotations must be submitted electronically via email by the deadline, and all respondents must have an active registration in the System for Award Management (SAM) at the time of submission. Evaluations will follow the Lowest Price Technically Acceptable method, where offers are first ranked by price, and only those meeting all minimum technical specifications will be considered for award. The government will conduct a price analysis to determine whether a single or multiple awards would yield the lowest overall cost, and technical acceptability is determined strictly against the RFQ’s specifications. Options, if applicable, will be evaluated as part of the total price, and unbalanced pricing may render an offer unacceptable. Delivery cannot be backdated for maintenance or service renewals, and any associated reinstatement fees must be itemized separately. All inquiries must be directed to the designated point of contact via email, and late submissions will be handled according to FAR provisions.

Ophthalmic Goods Manufacturing

POSTED

DEADLINE

Space Science Information Technology SupportThe Naval Research Laboratory is soliciting proposals for Information Technology Support services under solicitation number N0017326R0007, exclusively for small businesses as a Total Small Business Set-Aside. The contract supports the Space Science Division and encompasses a wide range of IT functions including system integration, procurement, programming, maintenance, training, testing, and administration of information systems. Successful contractors must demonstrate expertise in integrating desktop and cluster-based computing environments, with familiarity in office automation systems, communication equipment, operating systems, scientific software, and business management applications. All submissions must be delivered electronically by 04:00 P.M. EST on July 31, 2026, to Contract Specialist Tamara Jenkins at tamara.n.jenkins.civ@us.navy.mil. The solicitation was posted on July 16, 2026, and is managed by the Department of Defense through the NRL office located in Washington, DC, with additional point of contact Brandon Zellers available for secondary inquiries.

Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

DEADLINE

Pure Storage Flash Array Systems (Brand Name Only)The U.S. Naval Research Laboratory, under the Department of Defense, is soliciting offers for two new Pure Storage Flash Array systems under solicitation number N0017326QTS10, issued as a combined synopsis and solicitation in accordance with FAR Subpart 12.2. This acquisition is structured as a Total Small Business Set-Aside, exclusively reserved for small businesses, and specifies the procurement of the systems along with all necessary components, on-site installation, warranty, and ongoing support. The requirement is brand name only, with justification and approval documentation provided in the attachments, and includes mandatory security protocols and contractor requirements detailed in the referenced documents such as the DD254 and Requirements for On-Site Contractors. All technical and administrative inquiries must be submitted by 20 July 2026 at 4:00 PM EST, and quotes must be emailed to the designated point of contact no later than 30 July 2026 at 12:00 PM EST. The place of performance is located at the Naval Research Laboratory in Washington, D.C., with the primary point of contact being Todd Schwartz. The NAICS code 334112 applies to this procurement, reflecting its classification within the Computer and Peripheral Equipment Manufacturing sector. Interested parties must reference the attachments to the posting for full specifications, the detailed Bill of Materials and CLIN structure, and submission instructions. No separate written solicitation will be issued, and the only official source of information is this combined announcement. All provisions and clauses are incorporated by reference and can be accessed electronically via acquisition.gov. Proposals must be submitted via email, and responses must comply with all stated requirements to be considered.

Computer Storage Device Manufacturing

POSTED

DEADLINE

Ultra-Wideband Digital ReceiversThis notice is a Sources Sought Notice and Request for Information issued by the Naval Research Laboratory to gather market research data on ultra-wideband digital receivers, and it is not a solicitation or invitation to submit bids. No contractual obligation or financial commitment will result from this notice, and respondents must understand that any information provided will be used solely for planning and specification development purposes without recourse or compensation. The Department of Defense seeks information on three types of receivers: a four-channel wideband digital receiver with an input range of 100 to 26,500 MHz, a single-channel 40 GHz receiver with a 50 to 40,000 MHz range, and a single-channel 26 GHz receiver with a 50 to 26,000 MHz range. All units must deliver IQ data in SDDS, SDDSX, or VITA-49 formats, use specified processors and digitizers, operate within a -20 to +60°C range, have Ethernet remote access, and meet strict RF performance parameters including noise figure, intercept points, gain, bandwidth options, power consumption, and physical dimensions. Each system must be capable of 1 kHz RF tuning resolution and utilize QSFP+ or QSFP28 interfaces for high-speed data transport. Respondents must submit a capability statement not exceeding five pages, including company contact details, CAGE code, NAICS code 334290, business size classification, and socioeconomic status. Technical responses must detail how proposed products meet or exceed each specification, provide product brochures highlighting compliance, and identify whether the items are commercial off-the-shelf products with documented non-government sales. Past performance on similar contracts must be listed, and the availability of products on GSA or other federal contracts should be confirmed. The notice explicitly references FAR provisions that clarify this is for market research only, not a procurement action, and that responses will not be treated as offers or proposals. Offers of products designated as “brand name or equal” must clearly demonstrate equivalency in salient performance characteristics. All responses are due by July 24, 2026, and should be directed to the designated point of contact at the Naval Research Laboratory in Washington, DC.

Other Communications Equipment Manufacturing

POSTED

DEADLINE