This Government Contract opportunity from Government of Canada was posted on June 24, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Technical Equivalency Certification & Substitution Services

Closed

International

Submission Closed07/10/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 541330

New

SLED

Request for Qualifications for Professional Grant Administration and Engineering Services

Solicitation # BD-27-1649-TONTH-TONTH-132119

The Massachusetts town of Northborough, through its agency TONTH - Town Hall, is soliciting qualifications for professional grant administration and engineering services under solicitation number BD-27-1649-TONTH-TONTH-132119. This procurement is targeted toward firms capable of providing engineering services in compliance with 2 CFR 200.320(d), which governs the selection of contractors for federal funding applications, ensuring qualifications are based on competence, experience, and technical capability rather than cost. The opportunity is open to state, local, and educational government entities and is not subject to a specific set-aside designation. Interested parties must submit their qualifications by the deadline of September 10, 2026, at 7:00 PM Eastern Time, with responses directed to the office located at Main Street, Northborough, MA 01532. The solicitation is issued by the Massachusetts agency and the point of contact for inquiries is Scott Charpentier, the designated Purchaser. All work is expected to be performed locally in Northborough, and interested firms can access the full solicitation details through the provided Commbuys portal link. The process emphasizes technical qualifications and alignment with federal grant compliance standards, particularly in engineering support for public infrastructure and grant-related initiatives.

POSTED

DEADLINE

SEEKING QUALIFIED SUBCONSULTANTS IN RIVERSIDE COUNTY/SOCAL TO SUPPORT WELL REPLACEMENT PROJECT WITH WATER DISTRICT

Solicitation # seeking-qualified-subconsultants-riverside-countysocal-support-well-replacement-project-water

GHD Inc. is soliciting qualified subconsultants to support the Corydon Well Replacement Design Project on behalf of the Elsinore Valley Municipal Water District in Riverside County, California. The project requires professional services in engineering, environmental analysis, surveying, geotechnical studies, permitting, public outreach, and utility location, with a focus on engaging Disadvantaged Business Enterprises, Small Business Enterprises, Women-Owned Business Enterprises, Minority-Owned Business Enterprises, and other certified small firms including those owned by veterans and service-disabled veterans. Interested firms must submit a qualifications package by August 7, 2026, and request solicitation documents no later than 5 p.m. PST on August 14, 2026, by contacting Charlie Brown at charles.brown@ghd.com. The formal response deadline for proposals is September 15, 2026, and the work is designated under multiple NAICS codes primarily centered on engineering services, with set-asides reserved for small and disadvantaged businesses as defined by the SBA and Department of Transportation guidelines.

POSTED

DEADLINE

Corydon Well Replacement (C2305)

Solicitation # C2305

Ardurra Group, Inc. is soliciting proposals from Disadvantaged Business Enterprises (DBE) for the Corydon Well Replacement Project, a municipal groundwater initiative to design, provide bidding support, and deliver engineering services during construction for a new well to replace and decommission the existing Corydon well in California. The scope spans two phases: Phase 1 includes technical specifications, civil site design, line-bid items for drilling and abandonment of the existing well in compliance with Riverside County and California State Water Resources Control Board requirements, along with full-time on-site construction management oversight; Phase 2 involves detailed architectural, civil, mechanical, structural, electrical, and instrumentation and controls design drawings, plus a line-item bid schedule for equipping, testing, and commissioning the new well. Key deliverables include a Preliminary Design Report at up to 30% design level, review of approximately 200 submittals, assistance with the Domestic Water Supply Permit Amendment, and development of record drawings reflecting field changes, along with support for start-up, commissioning, and operator training. Design criteria require a 24-inch stainless steel Ful-Flo louvered well screen matching existing casing depth, vertical turbine pump equipment, and discharge piping tied into the Corydon Blend station and Malaga blending location, all in accordance with AWWA, SWRCB-DDW, DWR, and EVMWD standards. Proposals must be submitted via the PlanetBids portal by September 1, 2026, with questions due by August 25, 2026, and the project is scheduled to begin on November 2, 2026. The solicitation is set aside for Small Business, Small Disadvantaged Business, Women-Owned Small Business, Veteran-Owned Small Business, SBA-certified Service-Disabled Veteran-Owned Small Business, and Disadvantaged Business Enterprise categories under SBA guidelines. Evaluation is weighted toward relevant qualifications and experience (25%), understanding of project and approach (25%), scope and schedule (20%), innovation (10%), cost (10%), and overall proposal quality (10%), with award based on demonstrated competence rather than lowest price. Contractors must comply with strict federal requirements including Build America Buy America (BABA) provisions, Debarment and Suspension certifications, American Iron and Steel compliance, and prohibitions on covered telecommunications equipment under Section 889. Required submissions include completed Attachments 2 and 3—containing certifications for lobbying,

POSTED

DEADLINE

Corydon Well Replacement Project - Professional Design, Bidding Support, Engineering Services During Construction

Solicitation # corydon-well-replacement-project-professional-design-bidding-support-engineering-services-during-0

The Corydon Well Replacement Project is a public infrastructure initiative led by the Elsinore Valley Municipal Water District in Lake Elsinore, California, aimed at replacing an existing well with modernized water supply infrastructure. The scope of work encompasses comprehensive professional design services, support during the bidding process to ensure competitive and compliant contractor selection, and ongoing engineering oversight throughout construction to maintain technical integrity, schedule adherence, and regulatory compliance. The project is solicited under bid number C2305 and is governed by NAICS code 541330, classifying it under engineering services. The contracting agency, AKM Consulting Engineers, is managing the procurement and has designated Katie Neubauer as the primary point of contact for inquiries. The bid response deadline is set for September 1, 2026, and the contract opportunity is subject to Disadvantaged Business Enterprise (DBE) participation requirements aligned with Department of Transportation guidelines, encouraging minority- and disadvantaged-owned firms to engage in the bidding process. All work is to be performed at the project site in Riverside County, California.

AKM Consulting Engineers

POSTED

DEADLINE

Corydon Well Replacement Project – Professional Design, Bidding Support and Engineering Services During Construction

Solicitation # WO# C2305

The Corydon Well Replacement Project involves the design and construction support for a new municipal groundwater production well to replace the existing Corydon Well, along with the full abandonment of the old facility, all located on Elsinore Valley Municipal Water District property in California. The scope spans two phases: Phase 1 includes hydrogeological evaluation, aquifer analysis, well design aligned with AWWA standards and California regulatory requirements, civil site design, drilling and abandonment oversight, bidding assistance, and full-time on-site construction management during the drilling phase; Phase 2 covers the engineering design of wellhead and site facilities including architectural, structural, mechanical, electrical, instrumentation and controls systems, as well as support during bidding and construction for equipping and commissioning. The project demands strict adherence to Build America, Buy America Act requirements, ensuring domestic sourcing of iron, steel, and construction materials, with detailed documentation and certification of compliance. All services require coordination with the State Water Resources Control Board, Riverside County, and other local agencies for permitting, environmental reviews, water quality sampling, and regulatory compliance, including NPDES and SWRCB requirements. The contract mandates full-time construction management, QA/QC processes, surveying, geotechnical investigations, soil and corrosion testing, utility locating, and community engagement efforts. The project is partially funded by a $400,000 BOR Grant, triggering federal compliance obligations under 2 CFR Part 200, including audit rights, record retention for four years, debarment and suspension certifications, and anti-lobbying provisions. Contractors must hold current California professional licenses, California Air Resources Board compliance, and Department of Industrial Relations registration if deemed public work. Proposals must include detailed cost breakdowns by task, hourly rates, travel expenses, and demonstrated experience with municipal water projects, with key personnel resumes and certifications required. Evaluation prioritizes technical qualifications and project understanding equally with cost, and award is based on demonstrated competence, not lowest price. Proposals are due via the PlanetBids Vendor Portal by September 1, 2026, with project initiation planned for November 2026 and completion anticipated by May 2028. The total contract value is capped at $1,000,000, and firms are required to submit compliance forms including American Iron and Steel certification, conflict of interest disclosures, executive order certifications regarding Russian sanctions, debarment status, and DBE subcontractor information, with all subcontracts over $150,000

GEI Consultants, Inc.

POSTED

DEADLINE

Quality Inspection and Acceptance Testing

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

First Article Testing (FAT) ServicesThe contract seeks subcontractor services to perform First Article Testing, which includes dimensional inspection, material verification, and functional testing to ensure full compliance with design specifications. This work is critical for validating that initial production units meet all technical requirements before full-scale manufacturing proceeds. The testing must be carried out with precision and documented thoroughly to confirm conformance across all mandated parameters. The solicitation is issued under the NAICS code 541330 for engineering services and is associated with the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. Performance of the work is required at Robins Air Force Base, Georgia, with a response deadline of August 17, 2026. The contract is classified as a subcontract, and while no set-aside type is specified, all bidders must meet the technical and procedural expectations outlined for first article validation in a defense supply context. Further details and submission instructions are accessible through the provided DIBBS link.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

First Article Testing and Engineering Compliance ServicesThe contract requires the performance of First Article Testing on three units designated as Lot/Item 5306/1218846, with all testing activities strictly aligned to AS9102 standards and applicable engineering change controls. The deliverable is a formal test report that documents compliance with technical specifications and ensures that the first production units meet all required quality and performance criteria. This engagement is classified as a subcontract under a HUBZone Set-Aside, intended to support small businesses located in historically underutilized business zones. The work is to be performed at Robins Air Force Base, Georgia, with a zip code of 31098-1887, and falls under the NAICS code 541330 for engineering services. The solicitation was posted on August 9, 2026, with responses due by August 17, 2026, and is managed by the ASC Commodities Division of the Department of Defense. All testing procedures must adhere to rigorous aerospace quality standards, and the contractor must demonstrate full compliance with technical documentation and change management protocols throughout the process.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Quality Assurance and First Article Testing (FAT) Services

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Quality Assurance and Inspection ServicesThe contract requires independent inspection of PIN-RIVETs using military-standard sampling plans specified in MIL-STD-1916 or ASQ H1331, with acceptance quality level validation to ensure compliance with defined quality thresholds. Defect classification must adhere strictly to established military standards, ensuring consistent identification and categorization of non-conformances. The work is scoped under a subcontract for Quality Assurance and Inspection Services, with performance taking place at Cherry Point, North Carolina, 28533-5040. The North American Industry Classification System code 541330 indicates the nature of the services as engineering and technical consulting. This solicitation, issued by the ASC Commodities Division under the Department of Defense, is open for responses until August 17, 2026, with proposals submitted through the DIBBS system.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Quality Inspection and AQL VerificationThis contract entails the independent inspection and verification of kit attributes against specified Acceptable Quality Level standards, with critical defects governed by AQL 0.1 at Inspection Level VII, major defects by AQL 1.0 at Level IV, and minor defects by AQL 4.0 at Level II. The work requires rigorous adherence to statistical sampling protocols to ensure compliance with military-grade quality expectations, emphasizing precision in identifying and classifying defects across all components of the supplied kits. The solicitation is classified as a subcontract under NAICS code 541330, indicating it falls within the scope of scientific and technical consulting services, and is being managed by the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense. The opportunity was posted on August 9, 2026, with a response deadline of August 17, 2026, providing a limited window for qualified entities to submit proposals. Performance location details are not specified, and no set-aside status is indicated, suggesting the contract is open to all eligible subcontractors. The point of contact information is not included, and inquiries must be directed through the provided DIBBS portal link to access the full solicitation. Participation requires a thorough understanding of AQL methodologies and the ability to execute inspected audits under strict defense procurement protocols.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

First Article Testing (FAT) and Quality Compliance ServicesThe contract calls for the execution and documentation of First Article Testing to ensure full compliance with defense quality standards, encompassing dimensional inspections, material verification, and the preparation of First Article Inspection Reports. This work is critical to validating that production processes consistently yield parts and components meeting all technical specifications prior to full-scale manufacturing. All testing activities must align with applicable military and aerospace quality requirements, with meticulous recordkeeping and reporting to support audit readiness and supply chain integrity. The place of performance is designated as New Cumberland, PA, with a zip code of 17070-5002, indicating where the physical testing and documentation deliverables must be completed. The NAICS code 541330 classifies this as engineering services, underscoring the technical expertise required. Interested respondents must submit proposals by August 17, 2026, and the contract is structured as a subcontract under the Department of Defense’s ASC SUPPLIER OPER AE AND AF DIV, with all activities expected to support defense production requirements.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 18 hours ago

DEADLINE

in 7 days

AI Contract Overview

The contract seeks engineering support to demonstrate the equivalency of substitute bearing products, requiring comprehensive technical documentation and rigorous performance validation to prove that alternative components meet or exceed the functional, safety, and reliability standards of the original equipment. This work involves detailed analysis, testing protocols, and reporting to establish that the substitute bearings can be safely and effectively employed in critical applications without compromising system integrity. The effort must align with established industry and defense specifications, ensuring seamless integration and long-term operational viability in demanding environments. The contract is issued under the Department of National Defence, Government of Canada, as a subcontract with a NAICS code of 541330, indicating engineering services. Responses are due by July 10, 2026, and performance is expected to occur in British Columbia and Nova Scotia. While the solicitation number and point of contact are not provided, potential offerors must be prepared to deliver verified technical evidence and certified test results to support equivalency claims, with a focus on meeting the high standards required by defense and aerospace applications.