Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Technical Support and System Availability Maintenance

Active

International

Response Deadline08/31/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract titled Technical Support and System Availability Maintenance is a subcontract issued by the National Research Council of Canada, part of the Government of Canada, to provide ongoing technical support aimed at ensuring continuous system availability, optimal performance, and strict adherence to uptime and operational readiness standards. The scope of work focuses on maintaining critical systems to meet established compliance requirements, with an emphasis on preventing downtime and sustaining high levels of reliability. This effort is essential to support the agency’s operational functions and ensure that technical infrastructure remains functional and secure at all times. The solicitation was posted on August 4, 2026, with a response deadline of August 31, 2026, and falls under the NAICS code 541512 for computer systems design and related services. Performance of the contracted work is required to take place in Mississauga. Although no specific set aside or organization type is indicated, the contract is structured as a subcontract under the broader procurement framework of the Canadian government. Interested parties must submit proposals by the specified deadline to be considered for award, with all work expected to align with the government’s standards for system integrity and continuous operational support.

General Info

Technical support contract for system availability in Mississauga, ensuring uptime and compliance with Canadian government standards.

Agency

Government of Canada → National Research Council of CanadaView Agency

NAICS

541512 - Computer Systems Design ServicesView NAICS

Place of Performance

Mississauga, CAN

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 4

subcontract

Response DeadlineAug 31

Submission deadline

Response Deadline

08/31/2026, 07:00:00 PM UTCin 26 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyGovernment of Canada → National Research Council of Canada

ContactsNo contacts available

OfficeN/A

Organization / Agency

Government of Canada → National Research Council of Canada

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Ongoing technical support to ensure system availability, performance, and compliance with uptime and operational readiness requirements.

Similar Contracts

Same NAICS industry code

SLATE Admissions Platform Consultancy

Solicitation # 06092026

University of Arkansas Fayetteville (UAF)

POSTED

about 10 hours ago

DEADLINE

in about 5 hours

Virtualization Consulting IDIQThe Port of Seattle is seeking a qualified technical services partner to conduct a thorough evaluation of its existing virtualization platform, assessing its health, performance, security posture, and architectural design. The engagement aims to validate operational reliability, uncover technical risks, and identify opportunities for optimization that align with the organization’s business goals, compliance requirements, security standards, and resiliency objectives. The final deliverable will be a prioritized roadmap outlining actionable recommendations to strengthen the virtualization environment and ensure it supports current and future operational demands. The contract is issued under the Virtualization Consulting IDIQ framework and falls under NAICS code 541512, indicating it is for computer systems design and related services. The primary point of contact is Carol Hassard, with Jim Dawson serving as the project manager; inquiries should be directed to their provided contact details. The solicitation was posted on July 31, 2026, and is intended for vendors capable of delivering expert-level consulting services to evaluate and enhance the Port’s critical infrastructure. The work will be performed in support of the Port’s ICT Enterprise Infrastructure Services, with no specific location restrictions noted for performance.

ICT Enterprise Infrastructure Services

POSTED

about 10 hours ago

DEADLINE

Azure Consulting IDIQThe Port of Seattle is preparing to engage a qualified cloud services partner through an Indefinite Delivery/Indefinite Quantity (IDIQ) contract to support the adoption, modernization, and optimization of Microsoft Azure cloud and hybrid environments. The primary focus will be on evaluating and strengthening the existing Azure architecture, guiding the implementation of new services, and ensuring all deployments align with organizational standards, operational requirements, and long-term scalability goals. Key objectives include enhancing security posture, improving system resiliency, and optimizing cloud performance to meet evolving business needs. The partner will be expected to provide expert consultation throughout the lifecycle of Azure initiatives, from design and deployment to ongoing refinement and compliance validation. This engagement is managed by the Port of Seattle’s ICT Enterprise Infrastructure Services division, with primary point of contact Carol Hassard and Project Manager Jim Dawson overseeing the process. The solicitation is posted under NAICS code 541512 for computer systems design services, with all work expected to be performed in alignment with the Port’s internal frameworks and security protocols. The anticipated timeline for this initiative begins with a forecast posting in July 2026, signaling the upcoming availability of formal solicitation documents for qualified vendors.

ICT Enterprise Infrastructure Services

POSTED

about 10 hours ago

DEADLINE

FIDS Software ReplacementThe Port of Seattle through its ICT Enterprise Infrastructure Services is preparing to replace its existing Flight Information Display System software with a new solution to enhance airport operations and passenger information capabilities. This initiative is classified under NAICS code 541512 for Custom Computer Programming Services and is currently in the forecasting stage with a posted date of July 31, 2026. The project involves developing and deploying modern software tailored to display real-time flight data across multiple terminals, ensuring accuracy, reliability, and seamless integration with existing airport systems. The primary point of contact is Farlis Lewis, reachable via email and phone, with Krista Sadler serving as the project manager for technical coordination and oversight. The software replacement aims to improve system performance, user interface clarity, and system scalability to meet future growth demands at the airport. While the specific technical requirements and procurement timeline have not yet been released, interested vendors should prepare to demonstrate expertise in aviation information systems, real-time data integration, and customer-facing display technologies. The place of performance is likely centered at Seattle-Tacoma International Airport, and there is no indication of a set-aside for small businesses or other socioeconomic categories at this stage. All inquiries and future solicitations will be coordinated through the provided contact information and the official solicitation portal linked in the data.

ICT Enterprise Infrastructure Services

POSTED

about 10 hours ago

DEADLINE

System Integration and Project ManagementForsyth County Schools is seeking a subcontractor to deliver end-to-end integration of AI software, surveillance cameras, network infrastructure, and alerting systems as part of a comprehensive technology deployment. The scope includes full project planning, system testing, user training, and coordination among multiple vendors to ensure seamless interoperability and operational readiness. The work must be executed with strict adherence to technical specifications and timelines, emphasizing reliability, scalability, and security across all integrated components. The solicitation is open for responses until September 11, 2026, under a subcontract agreement classified under NAICS code 541512 for custom computer programming services, with performance expected to support the school district’s operational and safety objectives.

Forsyth County Schools

POSTED

about 17 hours ago

DEADLINE

in about 1 month

P26-10 AI Safety Analytics & Weapons Detection

Solicitation # PE-55214-NONST-2027-000000087

Forsyth County Schools in Georgia is seeking proposals for P26-10 AI Safety Analytics & Weapons Detection, a solicitation aimed at deploying advanced artificial intelligence systems to enhance school safety through real-time threat detection and analytics. The contract opportunity, identified by solicitation number PE-55214-NONST-2027-000000087, was posted on August 4, 2026, with responses due by September 11, 2026. The technology must be capable of identifying weapons and other safety threats in school environments using AI-driven video analytics, with requirements focused on accuracy, reliability, integration with existing security infrastructure, and compliance with privacy and data protection standards. The project is open to qualified vendors serving state, local, and educational agencies, with all technical specifications and implementation details available through the district’s procurement portal and the EUNA Procurement platform. Tammy Ridings serves as the primary point of contact for questions and submissions, and all submissions must adhere to the outlined parameters and deadlines provided in the official solicitation documents.

Forsyth County Schools

POSTED

about 17 hours ago

DEADLINE

in about 1 month

Electronic Invoicing and Payment ProcessingPhiladelphia Gas Works is seeking a subcontractor to integrate with its Paymode-X electronic invoicing and ACH payment system, enabling seamless enrollment, invoice submission, and remittance management. The contract focuses on establishing a secure, efficient digital workflow to replace manual processes, allowing vendors to submit invoices electronically and receive payments via ACH transfers with accurate remittance data. Participation requires full compatibility with Paymode-X’s platform, adherence to PGW’s technical specifications, and ongoing support for invoice tracking, dispute resolution, and payment reconciliation. The opportunity is open for response until August 18, 2026, and is classified under NAICS code 541512 for computer systems design services, indicating a need for technical expertise in financial system integration. The work will be performed remotely, with no specified physical location, and is not subject to any set-aside requirements.

Philadelphia Gas Works

POSTED

about 19 hours ago

DEADLINE

Cybersecurity Compliance for Controlled Technical Data (NIST SP 800-171)

LAND SUPPLIER OPNS ENGINES

POSTED

about 22 hours ago

DEADLINE

Cybersecurity Compliance (NIST SP 800-171) Assessment & Reporting

MARITIME SUPPLY CHAIN

POSTED

about 22 hours ago

DEADLINE

Cybersecurity Compliance & Covered Defense Information Safeguarding

DDSP NEW CUMBERLAND FACILITY

POSTED

about 22 hours ago

DEADLINE

Cybersecurity Compliance for CUIThis contract requires the implementation and assessment of NIST Special Publication 800-171 controls to safeguard Controlled Unclassified Information within contractor systems, as mandated by the Department of Defense. The work involves ensuring that all applicable cybersecurity safeguards are properly configured, documented, and validated to meet federal requirements for protecting CUI, with a focus on compliance across the entire system environment. The contractor must demonstrate through assessment that the required controls are not only in place but also effectively operating to mitigate risks associated with unauthorized access, data exposure, or system compromise. The contract is structured as a subcontract under the NAICS code 541512, indicating a scope tied to computer systems design and related services, and is managed by the Active Devices Division of the Department of Defense. The performance location is listed as FPO with a ZIP code of 96310-7161, suggesting operations may involve overseas or mobile environments. Bidders must submit their responses by August 17, 2026, following the solicitation issued on August 4, 2026. No set-aside provisions are specified, meaning the opportunity is open to all qualifying entities. Compliance adherence will be strictly evaluated, and failure to meet NIST 800-171 requirements could result in non-performance or termination of the subcontract.

ACTIVE DEVICES DIVISION

POSTED

about 22 hours ago

DEADLINE

Logistics and Administrative Support: DLA VSM and WAWF Compliance

Defense Logistics Agency

POSTED

about 22 hours ago

DEADLINE

More opportunities from Government of Canada → National Research Council of Canada

Same awarding agency

Security Compliance and Personnel Screening ManagementThe contract titled Security Compliance and Personnel Screening Management is a subcontract issued by the National Research Council of Canada under the Government of Canada, focused on managing personnel security clearances and enforcing strict escort protocols for unscreened staff. It requires adherence to federal security frameworks to ensure all personnel handling sensitive information or accessing secure facilities meet the required clearance levels and follow mandated procedures. The scope includes the end-to-end administration of screening processes, ongoing compliance monitoring, and coordination of controlled access measures to safeguard government assets and information. The contract is posted on August 4, 2026, with responses due by August 31, 2026, and performance is to occur in Mississauga. The North American Industry Classification System code 541611 indicates the work falls under administrative management and general management consulting services, underscoring the need for expert-level administrative and operational security support. While no set-aside provisions or point of contact details are provided, the contract emphasizes strict compliance with Canadian government security standards and requires the contractor to maintain rigorous documentation, reporting, and audit readiness to support national security objectives.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Secure Hardware Supply (New, Off-the-Shelf)The contract is for the supply of new, unused, off-the-shelf hardware components that must be non-counterfeit and fully compliant with government security and integrity standards. All items must meet stringent authenticity and quality requirements to ensure they do not introduce vulnerabilities into government systems. The procurement is classified as a subcontract under NAICS code 334111, indicating it relates to computer and peripheral equipment manufacturing, and is being managed by the National Research Council of Canada on behalf of the Government of Canada. Performance of the contract is required in Mississauga, with all deliveries expected to satisfy location-specific logistical and security protocols. The solicitation was posted on August 4, 2026, and responses are due by August 31, 2026, at 7:00 PM Eastern Time. There is no set-aside designation, meaning the opportunity is open to all eligible contractors without preference based on business size or type. Interested parties must ensure full adherence to security compliance protocols and provide documentation proving the origin, authenticity, and integrity of all hardware components. The tender opportunity is publicly accessible via the CanadaBuys portal, and bidders are responsible for verifying all technical and regulatory requirements before submission.

Electronic Computer Manufacturing

POSTED

DEADLINE

Licensed Software Provision and Technology TransferThe Government of Canada, through the National Research Council of Canada, is seeking a subcontractor to supply proprietary software and transfer related technology under a perpetual, royalty-free license. The contract requires the delivery of the software along with complete media, comprehensive documentation, and detailed technical specifications to ensure full operational capability and long-term usability. The licensed software will be deployed at the place of performance in Mississauga, with no geographic restrictions beyond this location. The solicitation is classified under NAICS code 511210, indicating a focus on software publishing, and is structured as a subcontract opportunity without a specified set-aside category. Interested parties must submit responses by the deadline of August 31, 2026, with the opportunity posted on August 4, 2026. The agreement emphasizes technology transfer, meaning the contractor must provide all necessary assets and knowledge to enable the Government of Canada to independently use, maintain, and potentially modify the software without ongoing licensing fees or restrictions. While no point of contact is listed, the tender details are accessible via the Canada Buys portal. The nature of the contract suggests a high degree of technical compliance and accountability, with expectations for seamless integration and supportability within existing federal systems.

Software Publishers

POSTED

DEADLINE

QCM System Installation and Training ServicesThe contract entails the provision of comprehensive training and technical support for the operation, calibration, and maintenance of a QCM system, encompassing full setup and commissioning services to ensure optimal functionality and user proficiency. This subcontract, issued by the National Research Council of Canada under the Government of Canada, is focused on delivering expert-guided on-site support to enable seamless integration and sustained operation of the system at the place of performance in Mississauga. The services are designed to equip personnel with the necessary skills to independently manage system performance, perform routine calibrations, and execute preventative maintenance procedures, minimizing downtime and maximizing system reliability. The opportunity is open for response until August 31, 2026, and is classified under NAICS code 611430, indicating its alignment with professional and technical training services. Although the solicitation number and point of contact information are not provided, interested parties must submit proposals prior to the stated deadline. The contract does not specify any set-aside categories, making it open to eligible contractors without restriction based on business size or ownership type. Participation requires demonstrated expertise in QCM technologies and a proven capacity to deliver hands-on technical training and field support in a government-operated environment.

Professional and Management Development Training

POSTED

DEADLINE

Benchtop Quartz Crystal Microbalance (QCM) System SupplyThe National Research Council of Canada is seeking a subcontractor to supply and deliver a benchtop quartz crystal microbalance system designed for high-precision mass measurement in interfacial process research. This equipment must meet rigorous technical specifications to enable accurate, real-time monitoring of mass changes at surfaces, supporting advanced scientific investigations in fields such as materials science, biochemistry, and surface chemistry. The system must be fully integrated, calibrated, and ready for immediate operational use upon delivery, with all necessary software, sensors, and accessories included to ensure seamless functionality in a laboratory environment. The contract is open for proposals with a response deadline of August 31, 2026, and the anticipated place of performance is Mississauga, Canada. The North American Industry Classification System code 334516 indicates this procurement is categorized under instrumentation manufacturing, specifically for laboratory and analytical equipment. This solicitation is issued as a subcontract under the Government of Canada’s procurement framework, and no specific set-aside provisions have been designated. All responses must be submitted by the stated deadline to be considered, and delivery must align with the technical and logistical requirements necessary for reliable deployment in a high-research demanding setting.

Analytical Laboratory Instrument Manufacturing

POSTED

DEADLINE

Multichannel Quartz Crystal Microbalance System

Solicitation # 25-58128

Analytical Laboratory Instrument Manufacturing

POSTED

DEADLINE

Fiber Laser Cutter for Aluminum and Copper

Solicitation # 26-58021

The National Research Council Canada is seeking a high-precision, enclosed fiber-laser cutting system capable of reliably cutting aluminum and copper for battery prototype components through solicitation 26-58021, with a submission deadline of July 27, 2026 at 14:00 EDT. The system must feature a fiber-type laser with a minimum power output of 3000W and a 10:1 operational turn-down ratio, a work area between 400x300mm and 635x635mm, a Z-axis of at least 50mm, and positioning precision of 0.1mm or better. It must cut 4.064mm aluminum and 3.175mm copper at speeds of at least 1m/min, include an auto-tracking laser head, a fully enclosed work area, integrated gas assist support for oxygen, nitrogen, and air, and an active protection system against back-reflected laser energy. The scope includes delivery, installation, commissioning, and training, with all deliverables required to be received at NRC Building U91, 2320 Lester Road, Ottawa, ON K1V 1S2. The system must be delivered under Incoterms® 2020 Delivery at Place (Vancouver, BC), with the vendor responsible for all shipping, customs, and duty costs. Only Canadian suppliers are eligible under the Policy on Reciprocal Procurement, and offers must be submitted electronically in three distinct sealed attachments labeled Technical Offer, Financial Offer, and Forms, with a total message size not exceeding 10MB; compressed files, links, or physical submissions are prohibited. The contract is awarded on the basis of the lowest evaluated price among compliant offers, with all mandatory technical requirements identified with the word “must” serving as pass/fail gates; failure to meet these disqualifies an offer from financial review. Offerors must submit sample cuts within 15 business days of receiving materials, accompanied by a detailed cutting report. Acceptance of the system by Canada requires a formal written request from the contractor, followed by a 30-day inspection period; rejection allows Canada to require corrections at the contractor’s expense without additional cost. Payment terms specify undisputed invoices will be settled within 30 days of receipt in acceptable form, with 15% withholding for non-resident contractors unless a CRA waiver is provided. Invoices must be emailed

Cutting Tool and Machine Tool Accessory Manufacturing

POSTED

DEADLINE

U-61 Cooling Plant Optimization

Solicitation # 25-58079

The National Research Council Canada is seeking qualified Canadian contractors to perform the U-61 Cooling Plant Optimization project at 1920 Research Private, Building U-61, Ottawa, Ontario. The contract requires the design, supply, installation, and commissioning of cooling system components to enhance operational efficiency and ensure compliance with applicable technical and safety standards, with all work to be completed within 16 weeks from the date of tender acceptance, targeting an anticipated start date of August 26, 2026. Only suppliers registered as Canadian Contractors are eligible to bid, as this solicitation is governed by the Policy on Reciprocal Procurement, and offers from non-trading partner countries will be rejected. Bidders must attend one of two mandatory site visits on July 29 or 30, 2026, at 10:00 a.m. EDT, and sign the attendance sheet; failure to do so will result in bid rejection. All personnel, including subcontractors, must obtain the required security clearances—ranging from Reliability Status to Top Secret—and comply with strict safeguarding measures for PROTECTED and CLASSIFIED information; non-compliance will deny site access, and the contractor assumes all associated delays and costs. Contractors must adhere to safety protocols during site visits and on-site work, including wearing approved personal protective equipment, and must ensure all personnel are properly trained, wear NRC-issued identification badges, and are subject to immediate removal for safety violations. The evaluation of bids will be based on five equally weighted technical factors: Quality of Workmanship, Time, Project Management, Contract Management, and Health and Safety, each scored from 0 to 20 using adjectival ratings of Unacceptable, Not Satisfactory, Satisfactory, and Superior; the award will be determined through a trade-off process considering overall technical merit. The contractor is required to submit comprehensive deliverables including commissioning reports, maintenance documentation, training programs, electrical and piping labels, and inventory records in English and computer-compatible formats, all in accordance with CSA, ASME, UL, AWWA, and other specified standards. All submissions must be emailed to Max.Grohs@nrc-cnrc.gc.ca as individual, non-compressed attachments prior to the August 18, 2026 deadline, with no external links or ZIP files permitted. The contract includes stringent administrative and financial requirements, including compliance with the Government of Canada’s Integrity Regime, proper accounting practices, and statutory declarations

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

Multichannel Quartz Crystal Microbalance System

Solicitation # 25-58128

The National Research Council Canada is soliciting proposals for the procurement of a single benchtop quartz crystal microbalance system designed for advanced material analysis. This procurement is issued under solicitation number 25-58128 Version B, with offers required to be submitted by August 31, 2026, at 7:00 PM Eastern Time. The system must meet specified technical requirements to support precision measurements in research environments, and the delivery location is designated as Mississauga, Canada. The procurement is open to all qualified offerors without set-aside restrictions and is managed by the Government of Canada through the NRC. Primary contact for inquiries is Hongli Wang, Contracting Authority, reachable at hongli.wang@nrc-cnrc.gc.ca. The solicitation was posted on August 4, 2026, and all details are publicly accessible through the Canada Buys portal.

Analytical Laboratory Instrument Manufacturing

POSTED

DEADLINE

Large Slurry Mixer

Solicitation # 26-58093

The National Research Council of Canada is soliciting a large slurry mixer for use in its Clean Energy Innovation Research Center to support the development of viscous battery slurries for a prototyping line, with the goal of enhancing efficiency and operational versatility. This procurement, under solicitation number 26-58093, is governed by the Policy on Reciprocal Procurement, which restricts eligibility exclusively to Canadian suppliers and suppliers from applicable trading partners; offers from non-trading partner entities will be rejected. The contract requires the delivery of a single large slurry mixer meeting strict technical specifications, including a maximum footprint of 2000 kg, dimensions no greater than 3000 mm in depth and height and 2000 mm in width, and a stand-alone, floor-mounted design operable by a single person. The system must include a cooling/heating capacity of at least 5000 kCal/h (6 kW) at 10°C with automatic temperature control and real-time temperature display on a control panel. The full scope includes final design and drawings for NRC approval, successful Factory Acceptance Test (FAT), delivery of the complete mixer with all accessories and documentation, on-site installation, Site Acceptance Test (SAT) approval, and comprehensive operator training. All deliverables must be completed within 11 months of contract award, with key milestones set at two months for design approval, five months for FAT completion, and eight months for delivery. Payment is on a firm unit price, fixed-price basis, with no advance payments and invoices submitted only after each deliverable is completed. The contract includes a mandatory 12-month warranty or the contractor’s standard warranty, whichever is longer, and requires compliance with environmentally preferable packaging standards and the NRC’s Security Requirements Checklist. The contractor must comply with Canadian federal ethics standards, including the Conflict of Interest Act and the Values and Ethics Code for the Public Service, and is subject to audit and oversight under the Accounts and Audit provisions. Payment terms specify 30 days for undisputed invoices, with 15 percent withholding for non-resident contractors unless a valid waiver is provided by the Canada Revenue Agency. The mixer will be delivered under Incoterms® 2020 DAP to 75, de Mortgage Boulevard, Boucherville, QC, J4B 6Y4, with shipping accessible only via de Lauzon Street. Proposals must be submitted electronically in three distinct sections—Technical Offer, Financial Offer,

All Other Industrial Machinery Manufacturing

POSTED

DEADLINE

ACCELERATING RATE CALORIMETER (ARC) SYSTEM

Solicitation # 26-58039

The National Research Council Canada is soliciting proposals for the supply of a high-precision Accelerating Rate Calorimeter system to support the safety and thermal analysis of advanced energy storage technologies. The system must meet stringent performance standards to enable accurate measurement of thermal runaway risks and reaction kinetics in next-generation battery materials and systems. All deliverables, including the fully operational ARC system with associated documentation and training, are required to be completed and received no later than December 15, 2026, approximately eight weeks following contract award. Proposals must be submitted by the deadline of September 1, 2026, with the solicitation number 26-58039 and posted on Canada Buys on August 4, 2026. Performance will occur at the NRC’s facility in Ottawa, Canada. The primary point of contact for inquiries is Hongli Wang, Contracting Authority, reachable at hongli.wang@nrc-cnrc.gc.ca. This procurement is open to all qualified offerors, with no set-aside restrictions, and is issued under the authority of the Government of Canada.

Analytical Laboratory Instrument Manufacturing

POSTED

DEADLINE

26-58075 Radio Frequency (RF) Test and Measurement Suite

Solicitation # 26-58075

The National Research Council of Canada is seeking a fully integrated Radio Frequency (RF) Test and Measurement Suite comprising a signal generator capable of producing signals from 10 kHz to 50 GHz with an integrated frequency multiplier capable of extending output to 110–170 GHz, a signal/spectrum analyzer with a measurement range up to 50 GHz, and a vector network analyzer operating up to 44 GHz. The system must function as a unified solution with centralized control and be designed for high-precision applications in quantum metrology, where phase noise, harmonic distortion, and long-term frequency stability are critical to accurate sensor operation. The signal generator must accept external 10 MHz or 100 MHz references for enhanced stability, and the multiplier must be seamlessly controllable through the same interface as the generator. The spectrum analyzer must accurately characterize signal strength, harmonics, and spurious emissions, while the vector network analyzer must measure both magnitude and phase of RF components across temperature conditions, including cryogenic environments. All equipment must comply with mandatory technical specifications covering frequency range, phase noise, harmonic levels, phase stability, and multiplier functionality, with full compliance required to be considered for award. The solicitation follows a Lowest Price Technically Acceptable (LPTA) procurement strategy, where only offers meeting all mandatory technical criteria are evaluated, and the award will be granted to the lowest-priced compliant proposal. Proposals must be submitted electronically by August 14th, 2026, at 2:00 PM EDT, as two separate, unzipped files labeled “Technical Offer” and “Financial Offer,” with a combined size not exceeding 10 MB. Delivery of the completed suite is due by January 15th, 2027, at the NRC facility in Ottawa, under Incoterms® 2020 DAP terms, with full documentation—including operating procedures, remote command sets, troubleshooting guides, and technical specifications—required in both PDF and hard copy. The contract includes an irrevocable option for additional goods or services under the same terms, and contractors must comply with Canadian reciprocal procurement rules, anti-forced labor policies, international sanctions, and the Federal Contractors Program for Employment Equity. Environmental standards mandate reusable, recyclable, or returnable packaging, and all submissions are subject to review and final acceptance by the Government of Canada. Proposals must also include completed certifications affirming integrity, eligibility, and compliance with all contractual conditions, and only Canadian suppliers or those

Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

DEADLINE