Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

This Government Contract opportunity from Department Of Defense was posted on June 12, 2009. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Thermal Measurement Equipment

Awarded
N68335-09-T-0109Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 334519
New
SLED
Flagler Scale Replacement
Solicitation # DOT-SS-27-9024-JM
The Florida Department of Transportation, Office of Motor Carrier Size and Weight, is initiating a single source procurement for the Flagler Scale Replacement project, identified by solicitation number DOT-SS-27-9024-JM. The project involves a static scale partial replacement at the I-95 Northbound and Southbound locations in Florida to reduce average wait times for overlength trucks. The scope of work includes extending existing scales to a 50-foot platform and modifying the scale pit configuration by extending it by 10 feet. The agency intends to award the contract to Mettler-Toledo, LLC, as their proprietary electronic scales and Weigh-In-Motion software are essential for critical system functions, including auto calibration, center of gravity assessment, auto release, and WIM record verification. The estimated contract value is 866,046.00 dollars with a performance period of 8 months. This procurement is being handled as a sources-sought notice to determine if the required services are available from a single source. Prospective vendors were required to submit information regarding their capabilities by November 19, 2026. The primary point of contact for this action is Jocelyn Moore, with the request originating from Pamela Blake of the Motor Carrier Size and Weight office.
Florida Department of Transportation

POSTED

about 21 hours ago

DEADLINE

in 21 days
NAICS: 334519
New
DIBBS
Supply of Incandescent Lamps (NSN 6240-01-563-9037)This subcontract through the Defense Logistics Agency involves the supply of 220 specialized incandescent lamps, specifically part number M6363/9-2 under NSN 6240-01-563-9037. The contractor is responsible for manufacturing or sourcing lamps that strictly adhere to MIL-DTL-6363J Revision J and MIL-DTL-6363/9A Revision A standards. All deliverables must meet rigorous quality assurance protocols per MIL-STD-1916 or ASQ H1331, with marking requirements following MIL-STD-129 and packaging compliant with RP001 and ASTM D3951. The project is subject to strict regulatory requirements, including mandatory compliance with the Berry Amendment and the Buy American Act. Performance for this contract is centered in Phoenix, Arizona, under NAICS code 334519. Interested parties must submit responses by November 9, 2026, to support prime contractors on DLA Troop Support projects.
Defense Logistics Agency

POSTED

about 23 hours ago

DEADLINE

in 11 days
NAICS: 334519
New
DIBBS
Supply of Fire Detector Sensing Elements (NSN 6350-37-530-6235)This subcontract involves the manufacture or sourcing of fire detector sensing elements meeting NSN 6350-37-530-6235 specifications for prime contractors supporting Department of Defense DLA supply contracts. The scope of work includes the production, marking, and labeling of radioactive materials with activity exceeding 0.002 microcuries per gram in strict accordance with safety regulations. The selected provider is responsible for delivering the packaged and labeled elements to the designated DLA delivery point in New Cumberland. Administrative requirements for this opportunity include mandatory registration in both SAM and WAWF. The contract falls under NAICS code 334519 and is associated with the DDSP New Cumberland Facility. Interested parties must submit their responses by the deadline of November 9, 2026.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 23 hours ago

DEADLINE

in 11 days
NAICS: 334519
New
DIBBS
Supply of Fluorescent Lamps (NSN 6240-01-582-8354)This subcontract involves the supply of fluorescent lamps under NSN 6240-01-582-8354 for prime contractors supporting Defense Logistics Agency Troop Support. The contractor must adhere to the DLA Master List of Technical and Quality Requirements RA001, with packaging and marking following MIL-STD-2073-1E, RP001, and MIL-STD-129 using Special Marking Code 01. All deliverables must comply with the Buy American Act and the Berry Amendment. The scope of work requires the delivery of 73 packages, each containing 40 lamps, shipped FOB Origin to Phoenix, Arizona. This procurement falls under NAICS code 334519 and is managed by the Department of Defense.
Defense Logistics Agency

POSTED

about 23 hours ago

DEADLINE

in 11 days
NAICS: 334519
New
DIBBS
Reciprocating Counter ManufacturingThis subcontract involves the manufacture of 87 reciprocating counters under NSN 6680-01-390-8625 for prime contractors supporting the DLA Weapons Support Nuclear Reactor Program. The scope of work requires precision machining and assembly to produce completed and tested units that strictly adhere to quality standards RA001, RC001, RP001, RQ002, and RQ011. Quality assurance must be maintained through zero-based sampling in accordance with MIL-STD-1916 or ASQ H1331. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 334519 and is managed by the Department of Defense. Performance for this contract will take place in Tracy, California. Interested parties must respond by November 9, 2026, to provide the required hardware for the nuclear reactor program.
DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 23 hours ago

DEADLINE

in 11 days
NAICS: 334519
New
DIBBS
Supply of Fuel Flow Meter (NSN 6680011855660)This subcontract involves the supply of one Fuel Flow Meter meeting NSN 6680011855660 specifications for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The hardware must be delivered to Redstone Arsenal and must adhere to strict quality and logistics standards, including sampling per MIL-STD-1916 or ASQ H1331, marking according to MIL-STD-129, and packaging requirements set by RP001 DLA. The opportunity is categorized under NAICS code 334519 and was posted on October 28, 2026, with a response deadline of November 5, 2026. The successful provider will be responsible for delivering a single, fully packaged and marked unit that complies with all specified Department of Defense technical and administrative requirements.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 23 hours ago

DEADLINE

in 7 days
NAICS: 334519
New
DIBBS
Radiation Sensing Elements & Electronics SupplyThis subcontract opportunity is for the supply of radiation-sensing tubes, detectors, and military-grade electronic circuit boards to support DLA Weapons Support Maritime Supply Chain projects. The selected provider will deliver electronic and sensing component kits for six units, ensuring all PCBs and sensors meet specific technical requirements for detecting designated radiation types. The contract is designated as a Total Small Business Set-Aside under NAICS code 334519. Performance will take place in New Cumberland, Pennsylvania, and requires strict adherence to ITAR/EAR compliance and Hazard Communication Standards. Responses are due by November 9, 2026.
DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 23 hours ago

DEADLINE

in 11 days
NAICS: 334519
New
DIBBS
Radiacmeter Precision Assembly & IntegrationThe Radiacmeter Precision Assembly and Integration subcontract is a total small business set-aside issued by the Department of Defense for the DLA Weapons Support Maritime Supply Chain. The project requires the final assembly, integration, and calibration of six Radiacmeters, adhering strictly to TDP Rev A Gen 1 and specific technical drawings. Work will be performed in New Cumberland, Pennsylvania, under NAICS code 334519. Due to the nature of the equipment, the contractor must hold US/Canada Joint Certification Program certification to ensure full ITAR and EAR compliance. Interested parties must respond by November 9, 2026, to provide the specialized technical services required for these prime contractor deliverables.
DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 23 hours ago

DEADLINE

in 11 days
NAICS: 334519
New
DIBBS
Supply of Incandescent Lamps (NSN 6240-01-564-9098)This subcontract involves the supply of 97 incandescent lamps to prime contractors supporting the Defense Logistics Agency. The required items are identified by NSN 6240-01-564-9098 and Textron part number 45-35-0008. All deliverables must be shipped FOB Origin and must strictly adhere to packaging and marking standards per MIL-STD-129 and RP001, while meeting FED-STD-313 and TQ requirement IP025 for hazardous materials. The contractor is required to maintain full compliance with the Buy American Act and the Berry Amendment. Performance for this contract is centered in Greensboro, North Carolina, under NAICS code 334519. Interested parties must submit their responses by the deadline of November 9, 2026.
Defense Logistics Agency

POSTED

about 23 hours ago

DEADLINE

in 11 days
NAICS: 334519
New
DIBBS
Display Unit Manufacturing and SupplyThis subcontract involves the manufacture and supply of nine electronic Display Units, identified by NSN 7025-01-587-3102, to support prime contractors under DLA Troop Support supply contracts. The Department of Defense requires that all units be produced in strict accordance with the OEM Source Control Drawing and the DLA Master List of Technical and Quality Requirements. To be eligible, the provider must obtain OEM approval or a Source Approval Request certification and ensure full compliance with the Buy American Act and Section 889 regulations. The project focuses on the delivery of nine fully completed and tested units, with performance taking place in New Cumberland. This opportunity falls under NAICS code 334519 and is managed by the Construction and Equipment T & IFO EQ agency. Interested parties must adhere to the specified timeline, with a response deadline set for November 9, 2026.
CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

about 23 hours ago

DEADLINE

in 11 days
NAICS: 334519
New
DIBBS
Supply of Humidity-Temperature Probes (NSN 6685008037705)This subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Supplier OEM Division, requires the procurement of 12 specialized humidity-temperature probes identified by NSN 6685008037705. The selected provider must manufacture or source these probes in strict compliance with OEM specifications and provide comprehensive documentation regarding the brand, model, and OEM part numbers for the defense telecommunications equipment. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 334519, with the place of performance located at Tinker AFB. Interested parties must submit their responses by November 5, 2026, to support prime contractors delivering on DLA Weapons Support ASC contracts.
DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 23 hours ago

DEADLINE

in 7 days
NAICS: 334519
New
DIBBS
Humidity-Temperature Probe ManufacturerThis subcontract involves the manufacture of three high-precision humidity-temperature probes, identified by NSN 6685008037705, for prime contractors supporting DLA Weapons Support ASC projects. The manufacturer is required to fabricate the probes in strict accordance with MIL-DTL-27723F and MS27188 standards, utilizing inspection systems that comply with SAE AS9003 or ISO 9001. Additional technical requirements include sensor resistance monitoring and the provision of Safety Data Sheets and Hazard Warning Labels as mandated by 29 CFR 1910.1200. The project is managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper OEM Division, with the place of performance located at Robins Air Force Base. Interested parties must adhere to the timeline established by the posting date of October 28, 2026, with a response deadline set for November 5, 2026. The work falls under NAICS code 334519.
DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 23 hours ago

DEADLINE

in 7 days

AI Contract Overview

Show more

The Naval Air Systems Command based in Lakehurst, New Jersey, awarded a firm fixed price purchase order to Hart Scientific of American Fork, Utah, for the procurement of specialized thermal measurement equipment. The order includes a variety of components such as a black stack base thermometer, multiple channel modules for SPRT, high temp PRT, thermister, and precision TC, an extended communications module, an SPRT probe, and a CHUB-E4 thermometer. This contract was awarded on a sole-source basis because Hart Scientific is the original equipment manufacturer and the only known source capable of meeting the program requirements. The procurement was executed under the authority of 10 USC 2304(c)(1) and FAR 6.302-1, with the award managed by the Navair Warfare Ctr Aircraft Division under solicitation number N68335-09-T-0109.

General Info

Agency

Department Of Defense → Navair Warfare Ctr Aircraft Division

Contract Value

$30,750.9

NAICS

334519 - Other Measuring and Controlling Device Manufacturing

Place of Performance

NJ, USA

Set-Aside

NONE

Awardee

HART SCIENTIFIC LLC

Award Issued Date

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

1 update
PhaseAwarded
Posted

Presolicitation

Notice updated

The notice description changed.

Awarded

Contract was awarded

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Navair Warfare Ctr Aircraft Division
Contacts2 people available
OfficeJOINT BASE MDL, NJ, 08733, USA
Organization / AgencyDepartment Of Defense → Navair Warfare Ctr Aircraft Division
Office AddressJOINT BASE MDL, NJ, 08733, USA
Contacts
Eric L. WatermanContract Specialist
contact@example.gov
+1 (555) 000-0000
Elaine LoveringContracting Officer
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
The Naval Air Systems Command, Lakehurst, NJ awarded a firm fixed price purchase order on a sole-source basis to Hart Scientific, located in American Fork, UT for Thermal Measurement Equipment to include P/N 1560 Black Stack Base Thermometer, P/N 2560 2-Channel SPRT Module, P/N 2561 2-Channel High Temp PRT module, P/N 2563 2-Channel STD Thermister Module, P/N 2565 2-Channel Precision TC Module, P/N 3650 Extended Communications Module, P/N 5685-S 0-1070 C 2.5 Ohm SPRT Probe, and P/N 1529 Thermometer, CHUB-E4, 2-PRT, 2-TC. Hart Scientific is the Original Equipment Manufacturer (OEM) of the these parts and is the only known source that can provide the above equipment that will satisfy the program's requirements. The Government procured the above items under the authority of 10 USC 2304(c)(1), FAR 6.302-1.

More opportunities from Department Of Defense → Navair Warfare Ctr Aircraft Division

Same awarding agency

NAICS: 332912
New
Federal
HIGH LIFT ADAPTER ADU-954/E, Outriggers, Push Up Adapter
Solicitation # N6833526R1091
Solicitation N68335-26-R-1091 is a Small Business Set Aside for a five-year Indefinite Delivery Indefinite Quantity (IDIQ) fixed-price contract to manufacture and deliver peculiar support equipment for the F/A-18E/F and EA-18G programs. The scope of work includes the production of High Lift Adapter Outriggers (P/N 4097AS265-1), Push Up Adapters (P/N 4097AS200-1), and MHU-191 Munitions Loaders (P/N 3992AS100-1), along with associated Proof Load Certificates. These items are destined for the US Navy, with delivery to Lakehurst, and the Royal Australian Air Force, with delivery to a freight forwarder in California. All equipment must be new, covered by a manufacturer warranty, and adhere to strict marking and packaging standards, including MIL-STD-130, MIL-STD-129R, and ASTM D3951-18. Award will be determined using a best-value trade-off process weighing price and delivery lead time as approximately equal factors. To be technically acceptable, offerors must be registered small businesses in SAM.gov, propose a delivery schedule of eight months or less, and provide a detailed delivery narrative. Critical compliance requirements include CMMC Level 2 certification and a current NIST SP 800-171 assessment recorded in the Supplier Performance Risk System. Proposals must include comprehensive cost and pricing data, with certified data required for thresholds exceeding 10 million dollars. All submissions are due by November 23, 2026, to the designated point of contact.
Fluid Power Valve and Hose Fitting Manufacturing

POSTED

2 days ago

DEADLINE

in 25 days
View Details
NAICS: 332710
New
Federal
Anchor Tiedown Weldment
Solicitation # N68335-26-Q-1184
The Naval Air Warfare Center Aircraft Division intends to award a sole source contract to Vital Link, Inc. for the procurement of two Anchor Tiedown Weldments, part number 602145-01. These hardware components are essential for the maintenance of F-414 engines within test cells as part of the Kuwait F/A-18 E-F Super Hornet Program. The selected vendor is responsible for the fabrication and pull testing of the weldments to ensure operational readiness. Vital Link, Inc. has been identified as the only capable source due to its status as the original equipment manufacturer and its possession of the necessary technical data. This procurement is being conducted under the authority of 10 U.S.C. 2304(c)(1) and FAR 6.302-1. While this is not a request for competitive proposals, the government will consider responses within fifteen days of publication, provided the respondent is registered in the System for Award Management.
Machine Shops

POSTED

2 days ago

DEADLINE

in 21 days
View Details
NAICS: 333515
New
Federal
PERISHABLE TOOLING FOR OUTER WING PANEL (OWP) AILERON HINGE REPLACEMENTS
Solicitation # N68335-27-Q-1003
The Naval Air Warfare Center Aircraft Division in Lakehurst, New Jersey, intends to award a sole source contract to J&S Tool, Inc. for the procurement of perishable tooling required for Outer Wing Panel aileron hinge replacements. This tooling supports the F/A-18 E/F and EA-18G aircraft and must be manufactured, assembled, inspected, and delivered in accordance with specific repair instructions and part numbers. Although The Boeing Company is the original equipment manufacturer, a licensing agreement allows the government to purchase these specific components directly from approved suppliers. Consequently, the government is utilizing the authority of 10 U.S.C. 2304(c)(1) and FAR 6.302-1 to negotiate directly with J&S Tool, Inc. as the only responsible source capable of satisfying the requirement.
Cutting Tool and Machine Tool Accessory Manufacturing

POSTED

2 days ago

DEADLINE

in 21 days
View Details
NAICS: 332710
New
Federal
BRACE, AIRCRAFT GROUND SERVICING
Solicitation # N68335-26-Q-1194
The Naval Air Warfare Center Aircraft Division intends to negotiate a sole source contract with Northrop Grumman Systems Corporation for the procurement of four aircraft ground servicing braces. These components, identified by part number 74D110613-1007 and national stock number 1730-01-473-3572, are required to support the Royal Australian Air Force F/A-18F and EA-18G program. The braces are critical for maintaining operational readiness, as they secure the stabilizer in a trim or specific leading-edge-down position during essential maintenance tasks such as engine or stabilizer replacement. Northrop Grumman is designated as the sole source for this requirement because, as the original equipment manufacturer, they possess the necessary technical data and production experience. The procurement is being conducted under the authority of 10 U.S.C. 2304(c)(1) and FAR 6.302-1. The equipment features a specialized tension bolt designed to fail during overload conditions to prevent aircraft damage. This presolicitation is managed by the Department of Defense with performance taking place in Lakehurst, New Jersey.
Machine Shops

POSTED

2 days ago

DEADLINE

in 21 days
View Details
NAICS: 336419
New
Federal
Adapter, Hellfire Missile (Upper) and Adapter, Hellfire Missile (Lower)
Solicitation # N6833526Q1186
The Naval Air Warfare Center Aircraft Division (NAWC-AD) is soliciting quotes for a Firm Fixed Price contract to procure 20 units of Upper Hellfire Missile Adapters (Part 1517AS106-1) and 20 units of Lower Hellfire Missile Adapters (Part 1517AS107-1), along with associated technical data. These items support the AH-1Z and UH-1Y Foreign Military Sales case for the Czech Ministry of Defense. This procurement is a 100% Small Business Set-Aside under NAICS code 336419. The final deadline for submission is November 10, 2026, with all proposals required to be submitted electronically to the point of contact, Juan Carlos Belmonte. Award will be granted based on the Lowest Price Technically Acceptable (LPTA) method. To be considered technically acceptable, offerors must be a certified small business, provide pricing for all CLINs, and commit to a delivery schedule of 90 calendar days after the award date. Due to the presence of Controlled Unclassified Information (CUI) and export-controlled technical data, offerors must provide a certified DD Form 2345 and proof of CMMC Level 2 self-assessment via the Supplier Performance Risk System (SPRS) to access the technical data packages. Additionally, the contract requires strict adherence to MIL-STD-129 and MIL-STD-130 for packaging, marking, and unique item identification. Shipping is quoted as FOB Origin, with hardware delivery to Gulfport, Mississippi, and technical data delivery to Joint Base MDL, New Jersey.
Other Guided Missile and Space Vehicle Parts and Auxiliary Equipment Manufacturing

POSTED

2 days ago

DEADLINE

in 12 days
View Details
New
Federal
Multi-Spectral Test Set (MSTS) Assessment, Evaluation, Inspection, and Repair Services
Solicitation # N68335-27-RFI-1016
The Naval Air Warfare Center Aircraft Division intends to establish a sole-source Basic Ordering Agreement for the assessment, evaluation, inspection, and repair of Multi-Spectral Test Sets, specifically part numbers EU04618-01-FG and EU04618-02-FG, to support the CV-22 aircraft variant. The government intends to award this contract to Textron Systems Corporation, as they are the original equipment manufacturer and hold the proprietary data rights and technical data package for the equipment. This procurement falls under NAICS code 811219 and Product Service Code J066. This notice serves as a sources sought market research tool and is not a request for proposal. While the government intends to proceed with a single source under statutory authority, interested parties may submit capabilities statements for consideration. There is no current commitment to issue a solicitation or award a contract, and the government will not provide payment for any information or responses received during this research phase.

POSTED

3 days ago

DEADLINE

in 2 days
View Details
NAICS: 334419
New
Federal
1553 Data Bus Test Cable Set, PN: 3239AS1510-1, NSN: 4920-01-505-5149; FMS Czech & Nigeria
Solicitation # N68335-27-Q-1018
The Naval Air Warfare Center, Aircraft Division, intends to award a competitive Firm Fixed Price contract for the procurement of two 1553 Data Bus Test Cable Sets, part number 3239AS1510-1. This equipment is designated as Peculiar Support Equipment to support the AH-1Z and UH-1Y programs under Foreign Military Sales for the Nigerian Air Force and the Czech Ministry of Defense. This opportunity is a total Small Business Set Aside under NAICS code 334419, identified by solicitation number N68335-27-Q-1018. While this notice serves as a presolicitation synopsis and not a formal request for proposal, interested vendors should monitor the SAM website for the official solicitation and any subsequent amendments.
Other Electronic Component Manufacturing

POSTED

6 days ago

DEADLINE

in 11 days
View Details
NAICS: 334513
Federal
Portable Oxygen Regulator Test Stand
Solicitation # N68335-27-Q-1033
The Naval Air Warfare Center Aircraft Division intends to award a non-competitive contract to Aerospace Control Products, Inc. for one Portable Oxygen Regulator Test Stand, part number 3949AS100-3. This procurement is part of a Foreign Military Sales case for the Japan Air Self Defense Force E-2D program. The government is utilizing a sole-source justification because Aerospace Control Products, Inc. is the only designer and manufacturer with the proprietary technical data and rights necessary to meet the specific standardization requirements of the Japanese partner. This presolicitation notice, identified by solicitation number N68335-27-Q-1033, was posted on October 22, 2026. While the government intends to proceed on a non-competitive basis, responsible sources may submit capability statements or quotations by the deadline of November 6, 2026. The primary point of contact for this action is Desiree Pendleton.
Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

7 days ago

DEADLINE

in 8 days
View Details
NAICS: 334513
Federal
Aircraft Pressurized Cabin Leakage Tester (APCLT)
Solicitation # N68335-26-Q-1204
The Naval Air Warfare Center Aircraft Division intends to negotiate a sole source contract with Hydraulics International, Inc. for the procurement of one Aircraft Pressurized Cabin Leakage Tester. This equipment, identified by part number 4129AS0100-1 and national stock number 4920-01-658-2036, is essential for the Royal Australian Air Force Program supporting F/A-18F and EA-18G aircraft. The portable unit utilizes facility compressed air to test canopy seals and pressurized cabins for leaks and pressure regulation capabilities, which is critical for maintaining operational readiness. Because Hydraulics International, Inc. is the original equipment manufacturer, the government has determined they are the only source with the necessary technical data and experience to provide the system. This procurement is being conducted under the authority of 10 U.S.C. 2304(c)(1) and FAR 6.302-1. The requirement falls under NAICS code 334513 and PSC code 4920, with performance taking place in Lakehurst, New Jersey.
Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

9 days ago

DEADLINE

in 14 days
View Details
NAICS: 541330
Federal
Shipboard Power Systems and Mechanical Interface AnalysisThis small business set-aside subcontract with the Navair Warfare Ctr Aircraft Division involves providing specialized analysis of shipboard power systems and mechanical interface issues for Support Equipment projects at NAWCAD Lakehurst. The scope of work focuses on evaluating electrical power compatibility and distribution on shipboard platforms, while providing critical assistance for Integrated Logistics Support certifications. The selected contractor will be responsible for delivering detailed interface analysis reports and supporting documentation for ILS certifications. Due to the nature of the work, a Secret security clearance is required. The response deadline for this opportunity is December 3, 2026.
Engineering Services

POSTED

10 days ago

DEADLINE

in about 1 month
View Details
NAICS: 541370
Federal
SE Engineering Drawing and Documentation ServicesThis subcontract opportunity, titled SE Engineering Drawing and Documentation Services, supports prime contractors on NAWCAD Lakehurst SE projects for the Department of Defense. The selected provider will be responsible for creating and revising engineering drawings using AutoCAD and Pro-Engineering Modules, preparing test procedures, and managing data within SEMS and Naval Air Technical Data systems. Key deliverables include finalized technical manuals and engineering drawing packages. The contract is designated as a Total Small Business Set Aside under NAICS code 541370. Due to the nature of the work, personnel are required to maintain a Secret security clearance. Interested parties must submit their responses by December 3, 2026, for performance located in zip code 08733.
Surveying and Mapping (except Geophysical) Services

POSTED

10 days ago

DEADLINE

in about 1 month
View Details
NAICS: 541620
Federal
RM&S and Environmental Compliance ConsultingThis small business set-aside subcontract involves providing Reliability and Maintainability as well as Environmental, Safety, and Occupational Health compliance services for prime contractors supporting the Naval Air Warfare Center Aircraft Division at Lakehurst. The scope of work includes evaluating RDEMO tests and FRACAS reports, performing NEPA compliance analyses, and drafting Programmatic Environmental Safety and Health Evaluations. Key deliverables for the project consist of detailed FRACAS reports, RDEMO evaluations, and comprehensive environmental safety and health documentation. Personnel assigned to this contract must possess a Secret security clearance to perform the required duties. The opportunity is categorized under NAICS code 541620 and is managed under the Department of Defense. Interested parties must adhere to the response deadline of December 3, 2026, for this specialized consulting engagement.
Environmental Consulting Services

POSTED

10 days ago

DEADLINE

in about 1 month
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

NAICS: 334519
Awarded
Federal
99--RETROFIT OF INSTRON MODEL 8501
Solicitation # NNG09298606Q

POSTED

over 17 years ago

CLOSED

over 17 years ago
View Details
NAICS: 334519
Awarded
Federal
ALPHA/BETA SCALERS
Solicitation # SP3300-09-Q-0025
DLA Distribution

POSTED

over 17 years ago

CLOSED

over 17 years ago
View Details
NAICS: 334519
Awarded
Federal
61--PARTSKIT VOLTAGE R
Solicitation # SPM7L309T3244

POSTED

over 17 years ago

CLOSED

over 17 years ago
View Details
NAICS: 334519
Awarded
Federal
H--ADVANCED VIDEO EXTENSOMETER PACKAGE
Solicitation # NNG09298602Q

POSTED

over 17 years ago

CLOSED

over 17 years ago
View Details
NAICS: 334519
Federal
52--Sole Source Notice of Intent
Solicitation # W81EWF-9104-2608

POSTED

over 17 years ago

DEADLINE

N/A
View Details
NAICS: 334519
Federal
66--SOLE SOURCE NOTICE
Solicitation # TARRES07609
W4GG Hq US Army Tacom

POSTED

over 17 years ago

DEADLINE

N/A
View Details
NAICS: 334519
Awarded
Federal
16--SENSOR,TRANSDUCER,A
Solicitation # N0038309RN046
Navsup Weapon Systems Support

POSTED

over 17 years ago

CLOSED

over 17 years ago
View Details
NAICS: 334519
Closed
Federal
52--One (1) BLSCOM-900, Large Aperture Scintillometer, BLS900, 500m to 5Km; two (2) SLSTRP-018, Instrumentation Tripods, Standard Height, 1.8m
Solicitation # W909MY09T0032
W6QK Acc-Apg Cont Ct Wash Ofc

POSTED

over 17 years ago

CLOSED

over 17 years ago
View Details
NAICS: 334519
Awarded
Federal
52--EMED M SYSTEM OR EQUIVALENT-Pedography testing equipment
Solicitation # W91QF0-09-R-0020
W6QM Micc-Carlisle Barracks

POSTED

over 17 years ago

CLOSED

over 17 years ago
View Details
NAICS: 334519
Awarded
Federal
70-- 3d Face/Head and Whole Body Scanner with software and installation
Solicitation # W911QY-09-R-0038
W6QK Acc-Apg Natick

POSTED

over 17 years ago

CLOSED

over 17 years ago
View Details
NAICS: 334519
Awarded
Federal
Electric Powered Hydraulic Test Stands
Solicitation # FA8125-09-Q-0137

POSTED

over 17 years ago

CLOSED

over 17 years ago
View Details
NAICS: 334519
Awarded
Federal
66--FLEXTEST HARDWARE UPGRADE FOR AERO-90 LOAD CONTROL SYSTEM
Solicitation # NNM09295661Q

POSTED

over 17 years ago

CLOSED

over 17 years ago
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS