Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Third-Party Acoustic Testing and Certification

Active

Federal

Response Deadline07/29/2027, 08:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for Third-Party Acoustic Testing and Certification supports Navsup Weapon Systems Support Mech projects within the Department of Defense. The selected provider will perform independent noise testing and quality validation for prime contractors, specifically conducting acoustic signature analysis and noise level testing. These activities ensure that decibel and frequency requirements are met in accordance with MIL-DTL-17931, utilizing specialized equipment such as anechoic chambers and precision rotation rigs. To qualify for this engagement, the contractor must hold ISO/IEC 17025 certification. The primary deliverables include detailed noise test reports and formal certifications of compliance. This opportunity falls under NAICS code 541380, with a response deadline set for July 29, 2027.

General Info

ISO 17025 certified provider performs acoustic testing and certification for DoD projects.

Agency

Department Of Defense → Navsup Weapon Systems Support Mech

NAICS

541380 - Testing Laboratories and Services

Place of Performance

PA

Set-Aside

NONE

Documents

This scope was carved out of N0010426RY001.

The full solicitation package (3 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Noise Tested Bearings IDIQ

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedJun 24

subcontract

Response DeadlineJul 29

Submission deadline

Response Deadline

07/29/2027, 08:00:00 PM UTCin 9 months

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Navsup Weapon Systems Support Mech

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Navsup Weapon Systems Support Mech

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs independent noise testing and quality validation for prime contractors on Navsup Weapon Systems Support Mech projects. Conducts acoustic signature analysis and noise level testing to validate decibel and frequency requirements of MIL-DTL-17931 using anechoic chambers and precision rotation rigs. Requires ISO/IEC 17025 certification. Delivers noise test reports and certifications of compliance.

Similar Contracts

Same NAICS industry code

Third-Party Construction Materials Testing & Inspection

University of Massachusetts System

POSTED

about 7 hours ago

DEADLINE

Campus Consulting – Construction Materials Testing And Special Inspection Services

Solicitation # 20261026019

California State University, Chico

POSTED

about 12 hours ago

DEADLINE

MIL-STD Environmental Testing ServicesThe MIL-STD Environmental Testing Services subcontract, issued by the Department of Defense under agency W6QK Acc-Apg, involves performing critical environmental qualification testing for prime contractors. The scope of work focuses on aircraft interior decontamination projects for the Joint Project Manager for CBRN Special Operations Forces. The selected provider will conduct chamber evaluations and environmental stress testing, utilizing temperature, humidity, and vibration chambers to verify equipment survival in austere environments. All testing activities must strictly adhere to MIL-STD-810H standards, with the final deliverable being comprehensive environmental qualification test reports. This opportunity falls under NAICS code 541380 and is designated for performance in Abell. The response deadline for this requirement is November 24, 2026.

POSTED

about 14 hours ago

DEADLINE

Specialized Aerospace Quality Inspection/Certification

Ok DLA Aviation At Oklahoma City

POSTED

about 14 hours ago

DEADLINE

in about 18 hours

AMS Designated Laboratory Meat Testing Services (ADL)

Solicitation # 12-1NTS-26-R-0002

The USDA Agricultural Marketing Service (AMS) is soliciting proposals under solicitation 12-1NTS-26-R-0002 to establish AMS Designated Laboratories (ADLs) for microbiological and fat testing of meat, poultry, egg, and aquatic products. This effort supports the National School Lunch Program and other federal nutrition assistance programs to ensure compliance with Federal Purchase Program Specifications. The government intends to award a Firm-Fixed-Price, Indefinite Delivery/Indefinite Quantity (IDIQ) contract with a base period from April 1, 2027, through March 31, 2028, and four subsequent option periods, extending the total performance period to March 31, 2032. The contract has a guaranteed minimum of 10,000 dollars and a maximum ceiling of 15,000,000 dollars. This procurement is specifically set aside for Women-Owned Small Businesses (WOSB). Selected laboratories must maintain ISO/IEC 17025:2017 accreditation and utilize approved methods from FSIS MLG, AOAC, or AOCS. Key responsibilities include conducting analyses for Aerobic Plate Count, Total coliforms, Generic E. coli, and Salmonella, as well as providing sampling procedures and shipping supplies to vendors. Contractors are required to provide timely reporting of results, daily status reports, and statistical process control data. Proposals will be evaluated based on Best Value, considering technical capabilities, past performance with at least two references from the last five years, and price. All submissions must be uploaded in PDF format via WBSCM by the deadline of November 20, 2026.

POSTED

about 14 hours ago

DEADLINE

Granite Surface Plate Calibration and lapping - with Q&As

Solicitation # W519TC27QA007

Solicitation W519TC27QA007, issued by the Army Contracting Command - Rock Island, seeks an ISO 17025 accredited vendor to provide annual inspection, calibration, and lapping repair for granite surface plates at the Rock Island Arsenal Joint Manufacturing and Technology Center. The requirement is structured as a firm-fixed-price contract consisting of a base year from February 2, 2027, to February 1, 2028, with four subsequent option years, for a total potential duration of five years and six months. All work must be performed in accordance with ASME B89.3.7 and ANSI Z-540-1 standards, with calibrations traceable to NIST. The contract utilizes a hybrid pricing model where the annual inspection and calibration of all plates are firm-fixed-price lots, while lapping repairs are priced separately via an hourly labor rate and must be authorized by the Contracting Officer or COR. Estimated travel costs should be included in the firm-fixed pricing, though actual costs will be billed after service per Joint Travel Regulation rates. Deliverables include calibration stickers for each plate and a Service Acceptance Report submitted within three business days of completion. Offerors must submit their proposals by November 9, 2026, including a signed concurrence of the Scope of Work and documentation of their technical capabilities.

POSTED

about 14 hours ago

DEADLINE

B--METAGENOMICS & TRANSCRIPTOMIC SERVICES

Solicitation # 140G0226Q0145

Solicitation 140G0226Q0145 is a firm-fixed-price Blanket Purchase Agreement (BPA) issued by the USGS OAG Denver Acquisition Branch to provide next-generation sequencing (NGS) services for the Upper Midwest Water Science Center’s Michigan Bacteriological Research Laboratory. The scope of work includes shotgun metagenomics, whole genome sequencing (WGS), and RNA-sequencing (RNA-seq) to support research on bacterial pathogens, antibiotic resistance, and microbial ecology. The contract utilizes technologies such as Illumina, AVITI, Oxford Nanopore, and PacBio. The BPA has a total not-to-exceed value of $300,000.00 and a five-year period of performance from September 28, 2026, to September 27, 2031, with specific performance periods defined by individual call orders. This opportunity is set aside for Women-Owned Small Businesses (WOSB) and Economically Disadvantaged Women-Owned Small Businesses (EDWOSB). Award decisions are based on the most advantageous offer, where non-priced technical factors—specifically past performance, key personnel qualifications, and the capability to provide the required sequencing deliverables—are significantly more important than cost. Deliverables must meet strict quality standards, including a 75% quality score over 30 per sequencing run, and be delivered via secure FTP or external hard drive with comprehensive technical metadata. Payments are processed electronically through the Treasury’s Invoice Processing Platform (IPP), and the place of performance is located in Lansing, Michigan.

Ofc Of Acquisition Grants-Denver

POSTED

about 14 hours ago

DEADLINE

W684Q-264141 - Laboratory Testing - RFSO

Solicitation # WS5609648156

The Government of Canada, through the Department of Public Works and Government Services, has issued solicitation WS5609648156 for laboratory testing services. This federal opportunity, identified as W684Q-264141, falls under NAICS code 541380 and specifies that the place of performance will be located in British Columbia, Canada. The solicitation was posted on October 27, 2026, with a response deadline set for November 4, 2026, at 7:00 PM. Interested parties may coordinate with the primary contracting authority, Nicki Arrieta, to facilitate their submissions.

Department of Public Works and Government Services

POSTED

about 21 hours ago

DEADLINE

Ultrasonic Rail Testing and Material CertificationThis subcontract for Ultrasonic Rail Testing and Material Certification involves providing independent third-party testing and certification services for prime contractors working on Maryland Transit Administration projects. The selected vendor must be an MTA-approved certified independent testing laboratory capable of performing 100 percent in-line ultrasonic testing across the full length of rails. This technical process requires the use of a computerized DAPCO 300 testing unit or an approved equivalent to ensure material integrity. The contractor is responsible for delivering formal certified test reports and certificates of compliance to verify that all rail materials meet the necessary standards. Interested parties must submit their responses by November 16, 2026, under NAICS code 541380.

Maryland Transit Administration

POSTED

DEADLINE

Concrete Field TestingThis subcontract opportunity involves providing quality assurance testing for prime contractors working on California Department of Transportation highway projects. The primary scope of work focuses on conducting field testing of concrete pours to verify strength and ensure strict adherence to mix compliance standards. The selected provider is responsible for delivering certified test reports to document these findings. To qualify for this engagement, the contractor must employ a certified ACI Grade 1 concrete field-testing technician. Interested parties must submit their responses by December 3, 2026, in accordance with the solicitation posted on October 26, 2026. The project falls under NAICS code 541380.

California Department of Transportation

POSTED

DEADLINE

in about 1 month

Laboratory Ventilation Testing and CertificationThis subcontract opportunity is for Laboratory Ventilation Testing and Certification to support prime contractors on San Francisco Unified School District facility projects. The selected provider will perform specialized testing and official certification of both new and existing bio-safety cabinets and laboratory fume hoods. Using smoke generators and airflow velocity meters, the contractor must verify proper containment and airflow, ultimately providing official certification labels and detailed reports for every unit tested. The project is managed by the San Francisco Unified School District Facilities Design and Construction Department and will be performed in San Francisco, California. Qualified bidders must possess certification authority recognized by local and California state agencies. The solicitation was posted on October 26, 2026, with a response deadline of November 12, 2026.

San Francisco Unified School District Facilities Design and Construction Department

POSTED

DEADLINE

Vehicle Compliance Testing & InspectionThe Vehicle Compliance Testing and Inspection subcontract involves providing essential legal testing and safety inspections for prime contractors delivering vehicles to School District 68 Nanaimo-Ladysmith in British Columbia, Canada. The scope of work includes conducting safety inspections, weight distribution checks, and legal compliance certifications from the point of initial receipt through final acceptance. These services must be performed using appropriate weigh scales and safety tools to ensure all requirements mandated by law under Section 3.3 are met. The selected provider is responsible for delivering all necessary inspection reports and certifications to verify compliance. This opportunity is categorized under NAICS code 541380 and is associated with the Province of British Columbia. Interested parties should note the response deadline of November 26, 2026.

School District 68 Nanaimo-Ladysmith

POSTED

DEADLINE

More opportunities from Department Of Defense → Navsup Weapon Systems Support Mech

Same awarding agency

Supply of Replacement Parts for NSN 7HH 2010-01-325-5726

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 14 hours ago

DEADLINE

in about 1 month

Repair and Modification of Prairie Air STBD Components

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 14 hours ago

DEADLINE

in about 1 month

Industrial Coating and Surface Treatment

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

about 14 hours ago

DEADLINE

Supply of Replacement Components for Shoe Set (NIIN 012674906)

Industrial Supplies Merchant Wholesalers

POSTED

about 14 hours ago

DEADLINE

Precision Mechanical Repair and Overhaul (Shoe Set)

Other Electronic and Precision Equipment Repair and Maintenance

POSTED

about 14 hours ago

DEADLINE

45--COMPACTOR,REFUSE

Solicitation # N0010426QYA9S

POSTED

about 14 hours ago

DEADLINE

in about 1 month

KITE TERMINAL CONSO

Solicitation # N0010426QND93

Solicitation N0010426QND93 is a fixed-price request for quotations issued by the Navsup Weapon Systems Support for the teardown, evaluation, repair, and modification of 15 KITE TERMINAL CONSO units (NSN 5930-01-604-0750). The government intends to make a single award based on the most advantageous offer, prioritizing past performance over price. The response deadline has been extended to November 05, 2026. This requirement is processed under Emergency Acquisition Flexibilities and is certified for national defense under the Defense Priorities and Allocations System. The contractor must provide an estimated repair price and is required to submit a firm-fixed-price quote within 90 days of receiving the carcasses. A requested repair turn around time of 81.212 days is established, with price reductions applied for failure to meet this timeline. Technical requirements include strict adherence to original manufacturer specifications, MIL-STD-130 for physical identification, and MIL-STD-2073 for packaging. Additionally, the material must be mercury-free as it is intended for use on submarines and surface ships. Offerors who are not the original equipment manufacturer must provide a signed letter of authorization on the manufacturer's letterhead. Administrative requirements include the use of Wide Area Workflow for payments and mandatory reporting via the Commercial Asset Visibility Repairables Portal. The contract includes a one-year warranty from the date of delivery and requires the maintenance of inspection records for 365 days post-delivery. Delivery is set for 260 days after award, with destination points at DLA Distribution centers in Norfolk, Virginia, and San Diego, California.

Switchgear and Switchboard Apparatus Manufacturing

POSTED

about 14 hours ago

DEADLINE

Solicitation # N0010427QX071

Other Electronic Component Manufacturing

POSTED

about 14 hours ago

DEADLINE

59--CIRCUIT CARD ASSEMB, IN REPAIR/MODIFICATION OF

Solicitation # N0010426QYAJB

Solicitation N0010426QYAJB is a fixed-price request for quotations issued by the Navsup Weapon Systems Support Mech for the teardown, evaluation, repair, and modification of a circuit card assembly, NSN 5998-01-577-3864. The contractor is required to perform all work in accordance with original manufacturer specifications and drawings, adhering to strict quality standards including ANSI/ESD S20.20 for electrostatic discharge control and a total prohibition of metallic mercury to prevent contamination on submarines and surface ships. Delivery is required within 111 days on a FOB Destination basis, with all items physically identified and packaged according to MIL-STD-129, MIL-STD-130, and MIL-STD-2073. Due to the nature of the equipment, the contractor must possess a government security clearance and authorized access to Secret level classified documents as detailed in DD Form 254. Award evaluations will be based on Supplier Performance Risk System assessments regarding item, price, and supplier risk. The contractor must maintain inspection records for 365 days following final delivery and utilize the Wide Area Workflow system for electronic invoicing. Additional compliance is required for cybersecurity maturity model certification and the detection and avoidance of counterfeit electronic parts.

Bare Printed Circuit Board Manufacturing

POSTED

about 14 hours ago

DEADLINE

51--GUN,SEALANT,20 OUNC

Solicitation # N0010426QAD20

Solicitation N00104-26-Q-AD20 is a total small business set-aside request for quotation issued by NAVSUP Weapon Systems Support Mechanicsburg for the manufacture of 10 units of a 20-ounce sealant gun, part number 6237090-001, cage 53711. This fixed-price procurement requires the contractor to provide all parts listed on the applicable technical drawings, which take precedence over the contract text in the event of a conflict. The delivery timeline is 90 days with shipping terms set as FOB Destination. Award will be granted to the responsible offeror submitting the lowest priced, technically acceptable offer, with a 10 percent price evaluation preference applied to HUBZone small business concerns. The contract mandates strict adherence to quality and safety standards, including required government source inspection per FAR 52.246-2 and marking in accordance with MIL-STD-130. Packaging must comply with MIL-STD-2073 and MIL-STD-129, with specific requirements for domestic and overseas shipping levels. Contractors must submit Safety Data Sheets and GHS compliant labels for any hazardous materials prior to award. Administrative requirements include the use of Wide Area Workflow for invoicing and payment, and compliance with CMMC unique identifier reporting for information systems. The closing date for the receipt of offers has been extended to November 6, 2026.

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 14 hours ago

DEADLINE

59--CIRCUIT CARD ASSEMB

Solicitation # N0010426QYAF8

Solicitation N0010426QYAF8, issued by the Department of the Navy's NAVSUP Weapon Systems Support Mech, is a request for quotations for the manufacture and delivery of a Circuit Card Assembly (NSN 5998-01-616-3772). The procurement requires strict adherence to Technical Data Package version 002 and mandates that the supplier maintain a quality system compliant with ISO 9001 or MIL-I-45208. Key technical requirements include compliance with ANSI/ESD S20.20 for electrostatic discharge control and a strict mercury-free mandate for use on submarines and surface ships. The contract includes an option for additional quantities up to 100 percent for 365 days after receipt of the order. The government will evaluate offers based on the Supplier Performance Risk System, focusing on item, price, and supplier risk, while prioritizing U.S.-made or qualifying country end products. Award consideration is limited to original equipment manufacturers or authorized distributors who can provide a signed letter of authorization. Deliverables must be marked per MIL-STD-129 and packaged according to MIL-STD-2073-1, with specific packing levels based on the destination. Inspection and acceptance will occur at the origin, and all payment requests must be processed electronically through the Wide Area Workflow system. Following two amendments, the final response deadline for offers is October 28, 2026.

Bare Printed Circuit Board Manufacturing

POSTED

about 14 hours ago

DEADLINE

PANEL,CONTROL,ELECT

Solicitation # N0010426QND51

This solicitation, issued by NAVSUP Weapon Systems Support Mechanicsburg, seeks a contractor for the teardown, evaluation, repair, and modification of an electrical control panel (NSN 6110-01-554-5008). The requirement is pursued under Emergency Acquisition Flexibilities and is certified for national defense as a DO rated order. The contractor must provide an estimated repair price and a firm-fixed price quote within 90 days of receiving the carcass. A requested repair turn around time of 870 days is established, with specific price reductions applicable if this timeline is not met. The award will be made to a single offeror based on a best-value determination where past performance is considered more important than price. Key technical requirements include adherence to MIL-STD-130 for physical identification and MIL-STD-2073 for packaging. The material must be mercury-free, as it is intended for use on submarines or surface ships. The contract includes an option for the government to increase the quantity within 365 days of the award via modification. While originally a small business set-aside, the solicitation has been updated to unreviewed-unrestricted, and the deadline for receipt of offers has been extended to October 2, 2026. Payment and receiving reports must be processed electronically through the Wide Area Workflow system.

Motor and Generator Manufacturing

POSTED

about 14 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Annual Transformer Oil Sampling and Analysis Contract.

Solicitation # W9127N26QA085

W071 Endist Portland

POSTED

CLOSED

Special Notice for Analytical Service for Halogenated Organic Compounds in Marine Mammal Tissues

Solicitation # FD-2026-372

Department Of Commerce Noaa

POSTED

CLOSED

Genome Sequencing

Solicitation # 1232SA26Q0824

USDA Ars Afm Apd

POSTED

CLOSED

BPA Quality Assurance Testing for USACE Sacramento District

Solicitation # W9123826QA022

W075 Endist Sacramento

POSTED

CLOSED

RFI - Electromagnetic Compatibility (EMC) / Electromagnetic Interference (EMI) Environmental Qualification Testing (EQT) Support

Solicitation # N64498-25-RFPREQ-PD-33-0206

Nswc Philadelphia Division

POSTED

CLOSED

Certificate of Conformance (COC) & Quality Documentation Services

Aviation Logistics Center (ALC)(00038)

POSTED

CLOSED

Vehicle Platform Integration and Testing

POSTED

CLOSED

Field Chemical Waste Characterization & Segregation

FA8604 Aflcmc Pzi

POSTED

CLOSED

Calibration Services for Measurement Equipment

Portsmouth Naval Shipyard Gf

POSTED

CLOSED

Inspection, Testing, and Quality Assurance Services

Ok DLA Aviation At Oklahoma City

POSTED

CLOSED

Testing and Quality Assurance Services

Ok DLA Aviation At Oklahoma City

POSTED

CLOSED

Dental Unit Waterline (DUWL) Testing & Monitoring

260-NETWORK Contract Office 20 (36C260)

POSTED

CLOSED

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS